Name: construction of an improved multi-tetrode hyperdrive for large-scale neural recording in behaving rats
Uploaded: 2018-05-09T15:00:00
Description: Watch this Scientific Journal Video about Construction of an Improved Multi-Tetrode Hyperdrive for Large-Scale Neural Recording in Behaving Rats at JoVE.com

我们感谢挪威科技大学 Kavli 神经系统科学研究所和神经计算中心莫石实验室为大鼠的慢性神经记录程序。这项工作得到了 NIH 赠款 R21 NS098146 和人类前沿科学计划的长期研究金 LT000211/2016-L 到 l 路。

1. 3D 机型的光固化成形
<ol><li>使用 stereolithographic 技术打印超空间引擎部件和配件。每个超空间引擎由十八梭、十八个梭螺栓和其他所有塑料件 (图 1) 组成。 注: 附件不是超空间引擎的一部分, 但对于超空间引擎的建设是必要的。</li>
</ol>2. 附件的准备工作 (图 2)。
<ol><li>
microdrive 机架的准备工作(图 2C<...

<ol>
	<li>O'Keefe, J., Recce, M. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Phase+relationship+between+hippocampal+place+units+and+the+EEG+theta+rhythm.">Phase relationship between hippocampal place units and the EEG theta rhythm.</a> Hippocampus. 3 (3), 317-330 (1993).</li><li>Wilson, M. A., McNaughton, B. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Dynamics+of+the+hippocampal+ensemble+code+for+space.">Dynamics of the hippocampal ensemble code for space.</a> Science. 261 (5124), 1055-1058 (1993).</li><li>Gothard, K. M., Skaggs, W. E., Moore, K. M., McNaughton, B. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Binding+of+hippocampal+CA1+neural+activity+to+multiple+reference+frames+in+a+landmark-based+navigation+task.">Binding of hippocampal CA1 neural activity to multiple reference frames in a landmark-based navigation task.</a> J Neurosci. 16 (2), 823-835 (1996).</li><li>Gray, C. M., Maldonado, P. E., Wilson, M., McNaughton, B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Tetrodes+markedly+improve+the+reliability+and+yield+of+multiple+single-unit+isolation+from+multi-unit+recordings+in+cat+striate+cortex.">Tetrodes markedly improve the reliability and yield of multiple single-unit isolation from multi-unit recordings in cat striate cortex.</a> J Neurosci Methods. 63 (1-2), 43-54 (1995).</li><li>Buzsaki, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Large-scale+recording+of+neuronal+ensembles.">Large-scale recording of neuronal ensembles.</a> Nat Neurosci. 7 (5), 446-451 (2004).</li><li>Fyhn, M., Hafting, T., Witter, M. P., Moser, E. I., Moser, M. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Grid+cells+in+mice.">Grid cells in mice.</a> Hippocampus. 18 (12), 1230-1238 (2008).</li><li>Skaggs, W. E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=EEG+sharp+waves+and+sparse+ensemble+unit+activity+in+the+macaque+hippocampus.">EEG sharp waves and sparse ensemble unit activity in the macaque hippocampus.</a> J Neurophysiol. 98 (2), 898-910 (2007).</li><li>Guo, P., Pollack, A. J., Varga, A. G., Martin, J. P., Ritzmann, R. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Extracellular+wire+tetrode+recording+in+brain+of+freely+walking+insects.">Extracellular wire tetrode recording in brain of freely walking insects.</a> J Vis Exp. (86), (2014).</li><li>Knierim, J. J., McNaughton, B. L., Poe, G. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Three-dimensional+spatial+selectivity+of+hippocampal+neurons+during+space+flight.">Three-dimensional spatial selectivity of hippocampal neurons during space flight.</a> Nat Neurosci. 3 (3), 209-210 (2000).</li><li>Leutgeb, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Independent+codes+for+spatial+and+episodic+memory+in+hippocampal+neuronal+ensembles.">Independent codes for spatial and episodic memory in hippocampal neuronal ensembles.</a> Science. 309 (5734), 619-623 (2005).</li><li>Lansink, C. S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+split+microdrive+for+simultaneous+multi-electrode+recordings+from+two+brain+areas+in+awake+small+animals.">A split microdrive for simultaneous multi-electrode recordings from two brain areas in awake small animals.</a> J Neurosci Methods. 162 (1-2), 129-138 (2007).</li><li>Kloosterman, F., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Micro-drive+array+for+chronic+in+vivo+recording:+drive+fabrication.">Micro-drive array for chronic in vivo recording: drive fabrication.</a> J Vis Exp. (26), (2009).</li><li>. Google Patents Available from: <a target="_blank" href="https://www.google.com/patents/US5928143">https://www.google.com/patents/US5928143</a> (1999)</li><li>Redish, A. D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Independence+of+firing+correlates+of+anatomically+proximate+hippocampal+pyramidal+cells.">Independence of firing correlates of anatomically proximate hippocampal pyramidal cells.</a> J Neurosci. 21 (5), RC134 (2001).</li><li>Schmitzer-Torbert, N., Redish, A. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Neuronal+activity+in+the+rodent+dorsal+striatum+in+sequential+navigation:+separation+of+spatial+and+reward+responses+on+the+multiple+T+task.">Neuronal activity in the rodent dorsal striatum in sequential navigation: separation of spatial and reward responses on the multiple T task.</a> J Neurophysiol. 91 (5), 2259-2272 (2004).</li><li>Nguyen, D. P., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Micro-drive+array+for+chronic+in+vivo+recording:+tetrode+assembly.">Micro-drive array for chronic in vivo recording: tetrode assembly.</a> J Vis Exp. (26), (2009).</li><li>Chang, E. H., Frattini, S. A., Robbiati, S., Huerta, P. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Construction+of+microdrive+arrays+for+chronic+neural+recordings+in+awake+behaving+mice.">Construction of microdrive arrays for chronic neural recordings in awake behaving mice.</a> J Vis Exp. (77), e50470 (2013).</li><li>Vandecasteele, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Large-scale+recording+of+neurons+by+movable+silicon+probes+in+behaving+rodents.">Large-scale recording of neurons by movable silicon probes in behaving rodents.</a> J Vis Exp. (61), e3568 (2012).</li><li>Siegle, J. H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Chronically+implanted+hyperdrive+for+cortical+recording+and+optogenetic+control+in+behaving+mice.">Chronically implanted hyperdrive for cortical recording and optogenetic control in behaving mice.</a> Conf Proc IEEE Eng Med Biol Soc. 2011, 7529-7532 (2011).</li><li>Brunetti, P. M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Design+and+fabrication+of+ultralight+weight,+adjustable+multi-electrode+probes+for+electrophysiological+recordings+in+mice.">Design and fabrication of ultralight weight, adjustable multi-electrode probes for electrophysiological recordings in mice.</a> J Vis Exp. (91), e51675 (2014).</li><li>. Google Patents Available from: <a target="_blank" href="https://www.google.com/patents/US4575330">https://www.google.com/patents/US4575330</a> (1986)</li><li>Ludvig, N., Potter, P. E., Fox, S. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Simultaneous+single-cell+recording+and+microdialysis+within+the+same+brain+site+in+freely+behaving+rats:+a+novel+neurobiological+method.">Simultaneous single-cell recording and microdialysis within the same brain site in freely behaving rats: a novel neurobiological method.</a> J Neurosci Methods. 55 (1), 31-40 (1994).</li></ol>

在这里, 我们描述了建设一个新开发的超空间引擎由十八独立移动 tetrodes 组成的过程。该驱动器可以通过在许多可用的硬件商店购买的负担得起的部件构建, 并与 stereolithographic 打印创建的组件结合使用。超空间超光速可以用标准的手术方法长期植入大鼠的头骨, 并且能够记录细胞外神经活动, 而动物则执行各种行为任务。
超空间引擎保留了原始诺顿超空间引擎的许多可取特性...

在系统神经科学领域, 科学家研究了神经相关的认知过程, 如空间导航, 记忆和决策。对于这些类型的研究, 在动物行为过程中监测许多单个神经元的活动是至关重要的。在过去的几十年中, 已经取得了两个重要进展, 以满足小动物细胞外神经记录的实验需要1,2,3。首先是开发的电子四极, 一捆四微丝用于记录神经元的神经活动同时1,2,4。电子四极四通道的活动的差分信号振幅允许从许多同时记录的单元格5 中分离单个神经元活动。此外, 微丝的柔韧性使得电子四极的稳定性能够最大限度地减少电子四极与目标细胞种群之间的相对位移。Tetrodes 现在被广泛使用, 而不是一个单一的电极为许多脑研究在不同的物种, 包括啮齿目动物1,2,6, 灵长类7, 昆虫8。其次是开发一个超空间引擎运载多个独立移动的 tetrodes, 它允许同时监测神经活动从大群神经元从多个记录位置3, 9,10,11,12。
为小动物提供可靠和负担得起的多电子四极记录装置是有限的。经典的超空间引擎最初由布鲁斯诺顿13开发, 已成功用于在过去两年中在许多实验室中自由行为的老鼠的神经记录9,10,14, 15. 但是, 由于技术原因, 构建诺顿驱动器所需的原始组件现在很难获得, 并且与最近改进的数据获取接口不兼容。另一个很好接受的超空间引擎设计要求 microdrives 单独手工制作, 这可能产生不一致的结果并消耗大量的时间12。为了记录大鼠不同脑区的神经活动, 我们利用 stereolithographic 技术开发了一种新的超光速引擎。我们寻求满足以下要求: (1) 新的超空间引擎必须允许精确的 tetrodes 在大脑中的位移, 并提供来自多个目标区域的稳定记录;(2) 新的超空间引擎必须与最近开发的磁 quickclip 系统兼容, 以便于方便连接;(3) 新的超光速引擎可以用容易获得的材料准确地再现。在这里, 我们提供了一个技术, 建立3维可打印的超空间引擎, 包含十八独立移动 tetrodes, 基于诺顿设计。在该协议中, 我们描述了新的超空间引擎的制造过程的细节, 我们已经成功地记录了 postrhinal 和内侧嗅皮层的单神经元动作电位和局部场电位, 在一周内自由地在自然觅食任务中的行为鼠。

<table>
	<tbody>
		<tr>
			<td>Welding rod</td>
			<td>Blue Demon</td>
			<td>ER308L-035-01T</td>
			<td>Stainless steel, 0.035&#34; in diameter</td>
		</tr>
		<tr>
			<td>Screw</td>
			<td>McMaster</td>
			<td>91771A060</td>
			<td>Stainless steel, flat head, 0-80&#160;thread,&#160;5/8&#34;&#160;in length</td>
		</tr>
		<tr>
			<td>Screw</td>
			<td>McMaster</td>
			<td>91772A051</td>
			<td>Stainless steel, pan head, 0-80&#160;thread,&#160;5/32&#34;&#160;in length</td>
		</tr>
		<tr>
			<td>Screw</td>
			<td>McMaster</td>
			<td>92196A056</td>
			<td>Stainless steel, socket head, 0-80&#160;thread,&#160;5/16&#34;&#160;in length</td>
		</tr>
		<tr>
			<td>Screw</td>
			<td>McMaster</td>
			<td>92196A055</td>
			<td>Stainless steel, socket head, 0-80&#160;thread,&#160;1/4&#34;&#160;in length</td>
		</tr>
		<tr>
			<td>Screw</td>
			<td>McMaster</td>
			<td>95868A131</td>
			<td>Nylon,&#160; socket head, 2-56&#160;thread,&#160;3/16&#34;&#160;in length, black</td>
		</tr>
		<tr>
			<td>Screw nut</td>
			<td>McMaster</td>
			<td>90730A001</td>
			<td>Stainless steel, narrow hex,&#160; 0-80&#160;thread</td>
		</tr>
		<tr>
			<td>Shoulder screw</td>
			<td>McMaster</td>
			<td>90298A213</td>
			<td>Stainless steel, 8-32 thread, 3/16&#34; in diameter, 1/4&#34; in length</td>
		</tr>
		<tr>
			<td>Cup screw</td>
			<td>McMaster</td>
			<td>92313A105</td>
			<td>Stainless steel, 4-40 thread, 3/16&#34; in length</td>
		</tr>
		<tr>
			<td>Thumb screw</td>
			<td>McMaster</td>
			<td>94323A592</td>
			<td>Nylon, 8-32&#160;thread,&#160;3/8&#34;&#160;in length, black</td>
		</tr>
		<tr>
			<td>Magnet</td>
			<td>Apex</td>
			<td>M3X1MMDI</td>
			<td>Neodymium, 3 mm X 1 mm disc</td>
		</tr>
		<tr>
			<td>Metal tubing</td>
			<td>Small Parts</td>
			<td>B00137QHNS</td>
			<td>Stainless steel, 23 gauge, 0.0253&#34; OD, 0.013&#34; ID, 0.006&#34; wall</td>
		</tr>
		<tr>
			<td>Metal tubing</td>
			<td>New England Small Tube</td>
			<td>Custom-made</td>
			<td>Stainless steel, 30 gauge, 0.012/0.0125&#34; OD, 0.007/0.008&#34; ID, full hard</td>
		</tr>
		<tr>
			<td>Heat-shrink tubing</td>
			<td>McMaster</td>
			<td>7856K72</td>
			<td>0.09&#34; ID before shrinking, blue</td>
		</tr>
		<tr>
			<td>Silicone tubing</td>
			<td>A-M Systems</td>
			<td>807300</td>
			<td>0.040&#34; ID, 0.085&#34; OD</td>
		</tr>
		<tr>
			<td>Polyimide tubing</td>
			<td>A-M Systems</td>
			<td>823400</td>
			<td>0.0045&#34; ID, 0.0005&#34; wall</td>
		</tr>
		<tr>
			<td>Ground wire</td>
			<td>A-M Systems</td>
			<td>791500</td>
			<td>0.005&#34; bare, 0.008&#34; coated, half hard</td>
		</tr>
		<tr>
			<td>Tetrode wire</td>
			<td>California Fine Wire</td>
			<td>Custom-made</td>
			<td>0.0007&#34; in diameter, platinum-iridium (90%-10%), HML and VG coating</td>
		</tr>
		<tr>
			<td>EIB</td>
			<td>Neuralynx</td>
			<td></td>
			<td>EIB-72-QC-Large</td>
		</tr>
		<tr>
			<td>Gold pins</td>
			<td>Neuralynx</td>
			<td></td>
			<td>large EIB pins</td>
		</tr>
		<tr>
			<td>Tap</td>
			<td>Balax</td>
			<td>01302-000</td>
			<td>M1.2 thread size</td>
		</tr>
		<tr>
			<td>Tap</td>
			<td>McMaster</td>
			<td>2522A811</td>
			<td>0-80 thread size, bottoming</td>
		</tr>
		<tr>
			<td>Tap</td>
			<td>McMaster</td>
			<td>2522A771</td>
			<td>0-80 thread size, plug</td>
		</tr>
		<tr>
			<td>Tap</td>
			<td>McMaster</td>
			<td>26955A94</td>
			<td>3/8&#34;-24&#160;thread size, bottoming</td>
		</tr>
		<tr>
			<td>Tap</td>
			<td>McMaster</td>
			<td>2522A713</td>
			<td>2-56&#160;thread size</td>
		</tr>
		<tr>
			<td>Tap</td>
			<td>McMaster</td>
			<td>2522A715</td>
			<td>4-40&#160;thread size</td>
		</tr>
		<tr>
			<td>Tap</td>
			<td>McMaster</td>
			<td>2522A718</td>
			<td>8-32&#160;thread size</td>
		</tr>
		<tr>
			<td>Die</td>
			<td>McMaster</td>
			<td>2576A457</td>
			<td>3/8&#34;-24&#160;thread size, 1&#34; OD</td>
		</tr>
		<tr>
			<td>Drill bit</td>
			<td>McMaster</td>
			<td>30585A82</td>
			<td>Wire gauge&#160;65,&#160;0.035&#34; in diameter</td>
		</tr>
		<tr>
			<td>Drill bit</td>
			<td>McMaster</td>
			<td>30585A83</td>
			<td>Wire gauge&#160;66,&#160;0.033&#34; in diameter</td>
		</tr>
		<tr>
			<td>Drill bit</td>
			<td>McMaster</td>
			<td>30585A87</td>
			<td>Wire gauge&#160;70,&#160;0.028&#34; in diameter</td>
		</tr>
		<tr>
			<td>Drill bit</td>
			<td>McMaster</td>
			<td>30585A88</td>
			<td>Wire gauge&#160;71,&#160;0.026&#34; in diameter</td>
		</tr>
		<tr>
			<td>Drill bit</td>
			<td>McMaster</td>
			<td>30585A91</td>
			<td>Wire gauge&#160;73,&#160;0.024&#34; in diameter</td>
		</tr>
		<tr>
			<td>Drill bit</td>
			<td>McMaster</td>
			<td>8870A23</td>
			<td>3/16&#34;&#160;in diameter</td>
		</tr>
		<tr>
			<td>Dremel disc</td>
			<td>Wagner</td>
			<td>31M</td>
			<td>Diamond coated, 22 mm in diameter, 0.17 mm in thickness</td>
		</tr>
		<tr>
			<td>Steel wire</td>
			<td>Precision Brand</td>
			<td>21212</td>
			<td>0.012&#34; in diameter, full hard</td>
		</tr>
		<tr>
			<td>Steel wire</td>
			<td>Precision Brand</td>
			<td>21007</td>
			<td>0.007&#34; in diameter, full hard</td>
		</tr>
		<tr>
			<td>Steel wire</td>
			<td>A-M Systems</td>
			<td>792700</td>
			<td>0.003&#34; in diameter, half hard</td>
		</tr>
		<tr>
			<td>Super glue</td>
			<td>Loctite</td>
			<td>LT-40640</td>
			<td># 406</td>
		</tr>
		<tr>
			<td>Super glue</td>
			<td>Loctite</td>
			<td>LT-41550</td>
			<td># 415</td>
		</tr>
		<tr>
			<td>Dental acrylic powder&#160;</td>
			<td>Teets</td>
			<td>223-3773</td>
			<td>Coral</td>
		</tr>
		<tr>
			<td>Dental acrylic liquid</td>
			<td>Teets</td>
			<td>223-4003</td>
			<td></td>
		</tr>
	</tbody>
</table>

construction of an improved multi-tetrode hyperdrive for large-scale neural recording in behaving rats

在清醒的动物中监测大量神经元的活动模式, 是系统神经科学领域的一项宝贵技术。该技术的一个关键组成部分是将多个电极精确放置到所需的脑区, 并维持其稳定性。在这里, 我们描述了一个构建3维可打印超空间引擎的协议, 其中包括十八个独立调整的 tetrodes, 专门针对在自由行为的大鼠体内的活体细胞外神经记录。附着在 microdrives 上的 tetrodes 可以单独推进到轨道上的多个脑区, 也可以用来将电极阵列放置到较小的区域。多重 tetrodes 允许同时检查许多单个神经元的动作电位, 以及在活动行为期间大脑神经元的局部磁场电位。此外, 该设计提供了更简单的3D 绘图软件, 可以很容易地修改不同的实验需要。

我们用一个新的超光速引擎来获得试验结果。该驱动器配备了 tetrodes 从ø17µm (0.0007), 聚酰亚胺涂层铂铱 (90%-10%) 线。tetrodes 的尖端被镀在铂黑溶液中, 以减少电极阻抗到100和 200 kΩ在1赫之间。超空间超空间被植入4.6 毫米左侧的中线和0.5 毫米前的横窦的头骨上的550克, 雄性长埃文斯鼠。另外的地线连接在小脑上的颅骨螺钉上。所有程序都是由贝勒医学院的机构动物护理和使?...

Watch this Scientific Journal Video about Construction of an Improved Multi-Tetrode Hyperdrive for Large-Scale Neural Recording in Behaving Rats at JoVE.com

Construction of an Improved Multi-Tetrode Hyperdrive for Large-Scale Neural Recording in Behaving Rats

我们提出了一个3维可打印的超空间引擎的建设与十八独立调整 tetrodes。超光速引擎的目的是记录在数周内自由行为的老鼠的大脑活动。

一种改进的多电子四极超光速引擎在行为大鼠大尺度神经记录中的构建

Monitoring the activity patterns of a large population of neurons over many days in awake animals is a valuable technique in the field of systems ...

The overall goal of this procedure is to construct a recording device with multiple independently adjustable electrodes for the examination of brain activity in freely behaving rats. So this method is very exciting because it will help answer several questions related to special navigation, decision making, and other cognitive processes. The main advantage of this hyperdrive is that it provides reliable neuro recording in the brain using materials that are easy to obtain.Although this method was designed to be used specifically with rats, it can be used with any species of similar or larger head sizes such as non-human primates, thereby allowing investigations of many species. Those new to this method might struggle with the nuance involved in the preparation of the steps cause there's a certain level of experience and accuracy that's required to develop these tricks that can make a successful drive. Begin by expanding the holes in the 3D printed core using different sized drill bits.Use a diameter of 0.61 millimeter for the 12 ground wire through holes. For the 18 tetrode through holes, first use a 0.66 millimeter bit and then widen with a 0.71 millimeter bit. A 0.84 millimeter diameter bit is used for the 18 guide rod blind holes.Next, thread the two through holes on top of the core and the remaining eight blind holes with a 0.80 tap. Use a bottoming tap for the blind holes. Create external threads at the base of the core using a 3/8-24 die.Adjust the die properly so the hyperdrive nut will fit over the new threads. Depending on the desired number of ground wires, insert multiple six millimeter long segments of 23 gauge metal tubing into the ground wire holes in the core gluing them if necessary. File the outer ends of the ground wire cannulas until they are flushed with the core and then clean the cannulas with a 0.30 millimeter diameter steel wire.Next, fully insert 18 08015.88 millimeter long flathead screws head down into the slots in the core. Do not bend the screws or damage the threads during this process. Using the rod positioning complex into the core station, position 18 17 millimeter segments of 0.89 millimeter diameter welding rod over the guide rod holes in the core and hammer them down about five millimeters until flushed with the screws.Correct the positions of the welding rods and screws if necessary then tighten the central shoulder screw and the surrounding six screws in the rod positioning complex to secure the outward directions of the rods in the core. Screw the nut onto the core with the rod positioning complex and fit the core into the hyperdrive holder to allow easier positioning under a stereoscope. Fill the slots with dilute dental cement to secure the screws to the core.Fill two to three slots at a time before the dental cement gets too thick. Scrape away any excess dental cement on the core to maintain a proper fit with the shield then allow to air dry for 15 minutes. Next, glue the screws and rods into the core with thin super glue and allow to dry for 15 minutes.Clean and expand the two outer holes in the 3D printed shuttle with drill bits. Use a 0.61 millimeter diameter bit for the smaller hole and a 0.89 millimeter bit for the larger hole. Insert the shuttle bolt into the bolt holder base ensuring the proper orientation.Then close the bolt holder lid. Hold the bolt holder tightly and thread slowly through the hole in the lid with a 0.80 tap. Tap two or three times until smooth.Then insert the shuttle bolt into the shuttle from the side with the smaller opening. Place the shuttle-shuttle bolt complex upside down in the microdrive assembly station base. Next, smooth both ends of a 15 millimeter segment of 23 gauge metal tubing, then position the tubing over the 0.61 millimeter diameter hole guided by the slot in the station lid.Hammer the cannula into the hole until the upper end is flushed with the station lid. Remove the outer half of the upper tip of the cannula with a sanding wheel. Clean the cannula with a 0.30 millimeter diameter metal wire.Then glue the cannula onto the shuttle using thin super glue making sure not to glue the shuttle bolts to the shuttle. Prepare at least 18 microdrives. Test the microdrives on the microdrive rack.Make sure that the shuttle bolt can rotate smoothly in the shuttle and that the entire microdrive moves freely along the length of the threaded rod. To insert guide cannulas into the hyperdrive core, begin by removing the heat shrink tubes and slide a four millimeter segment of silicone tubing along the bundle to the soldered-unsoldered border. Wedge the slit in the hyperdrive spacer to widen the central hole allowing the spacer to slip around the silicone tube.Remove the wedge when the spacer sits at the center of the silicone tube. Next, organize the positions of the guide cannulas in the bundle by placing 10 centimeter long segments of 0.18 millimeter diameter metal wire through each cannula into a specific tetrode hole in the hyperdrive core preventing any crossover of the wires or cannulas in the process. Bend the end of the wires to hold them in place.Push the cannulas through their respective holes in the core being careful to avoid bending or crossing between them until the free end of each cannula is at least two millimeters outside the upper end of the tetrode hole. Secure the spacer by screwing the nut onto the core being careful to prevent the spacer from rotating. Apply a drop of very dilute dental cement from the top of the core onto the junction of the cannulas to secure their relative positions.Cut the guide wires from the soldered end of the bundle and remove them from the cannulas by retracting from the free end. Load the microdrives slowly and carefully onto each threaded rod of the core. Confirm that the 23 gauge microdrive cannula goes into the tetrode hole smoothly, the 30 gauge guide cannula goes into the 23 gauge microdrive cannula smoothly, and the shuttle bolt turn smoothly along the threaded rod.Screw the microdrives down to one to 1.5 millimeters above the lower end of the threaded rods. Then cut 18 pieces of polyamide tubing into 43 millimeter segments which is the length of the guide cannula bundle plus seven millimeters. Clean each tube with a 0.8 millimeter diameter steel wire.Invert the core, insert the polyamide tubes carefully into the guide cannulas from the soldered end and push them all the way in. Then flip the core upright and glue the upper end of the polyamide tube onto the microdrive cannula with thick super glue. Place the core upside down and let the glue dry for 15 minutes.After drying, cut the extra polyamide tubing at the upper end leaving 0.5 to one millimeter outside the microdrive cannula. To assemble the ground wires, first cut lengths of 25 to 30 millimeters from coated steel wire. Then strip two millimeters of the plastic insulation from both tips of the wires and insert one end of each into both sides of a six to eight millimeter long 30 gauge cannula.Flatten this end of each cannula to secure the connection to their respective wires. Finally, insert the round end of the 30 gauge cannula into the upper end of the ground wire cannula in the core and press to make the insertion tight. Then complete assembly of the multi-tetrode hyperdrive according to the instructions in the written protocol.This scatter plot shows the relationship between peak to peak amplitudes of spikes recorded from two electrodes of a tetrode located in the post rhinal cortex. Each dot corresponds to one spike. Clusters of spikes are likely to originate from the same cell.Four clusters are color coded as seen here. The mean spike waveforms from all four tetrode channels of the color coded cells shown in the previous scatter plot are seen here. Traces of local field potential in the theta frequency range recorded simultaneously from four different tetrodes located in the medial entorhinal cortex when the rat was freely foraging are seen here.While attempting this procedure, it's important to work with precision throughout the entire procedure to ensure that all parts fit together properly. Also use care and wear proper PPE when working with the demo tool to avoid injury. After watching this video, you should have a good understanding of how to construct these improved hyperdrives carrying multiple tetrodes for chronic neuro recordings in behaving rats.

Research

JoVE Journal

Neuroscience

Design and Construction of a Cost Effective Headstage for Simultaneous Neural Stimulation and Recording in the Water Maze

同时神经刺激，并记录在水迷宫的设计和构建一个具有成本效益探头

Headstage preamplifiers and source followers are commonly used to study neural activity in behavioral neurophysiology experiments. Available commercial ...

科研

神经科学

Recording Large-scale Neuronal Ensembles with Silicon Probes in the Anesthetized Rat

在麻醉大鼠的硅探头录制的大型神经元合唱

Large scale electrophysiological recordings from neuronal ensembles offer the opportunity to investigate how the brain orchestrates the wide variety of ...

Large-scale Recording of Neurons by Movable Silicon Probes in Behaving Rodents

移动硅探针的神经行为鼠害的大型记录

A major challenge in neuroscience is linking behavior to the collective activity of neural assemblies. Understanding of input-output relationships of ...

Preparation of an Awake Mouse for Recording Neural Responses and Injecting Tracers

记录神经反应和注射示踪剂一个清醒小鼠的制备

It is well known that anesthesia alters neural response properties in various regions of the brain.13.  In the auditory system, fundamental response ...

Design and Assembly of an Ultra-light Motorized Microdrive for Chronic Neural Recordings in Small Animals

设计和组装的超轻型电动微型硬盘（Microdrive）慢性神经录音的小动物

The ability to chronically record from populations of neurons in freely behaving animals has proven an invaluable tool for dissecting the function of ...

Multi-unit Recording Methods to Characterize Neural Activity in the Locust (Schistocerca Americana) Olfactory Circuits

Multi-unit Recording Methods to Characterize Neural Activity in the Locust Schistocerca Americana Olfactory Circuits

多单位记录方法来描述蝗虫的神经活动（<em&gt; Schistocerca美洲</em&gt;）嗅觉电路

Detection and interpretation of olfactory cues are critical for the survival  of many organisms. Remarkably, species across phyla have strikingly similar ...

Neural Circuit Recording from an Intact Cockroach Nervous System

神经电路记录从一个完整的蟑螂神经系统

The cockroach ventral nerve cord preparation is a tractable system for neuroethology experiments, neural network modeling, and testing the physiological ...

Electrophysiological Method for Recording Intracellular Voltage Responses of Drosophila Photoreceptors and Interneurons to Light Stimuli In Vivo

Electrophysiological Method for Recording Intracellular Voltage Responses of Drosophila Photoreceptors and Interneurons to Light Stimuli In Vivo

为记录细胞内电压响应电法<em&gt;果蝇</em&gt;光感受器和中间对光刺激<em&gt;在体内</em

Voltage responses of insect photoreceptors and visual interneurons can be accurately recorded with conventional sharp microelectrodes. The method ...

Recording Spatially Restricted Oscillations in the Hippocampus of Behaving Mice

行为小鼠海马空间受限振荡的记录

The local field potential (LFP) emerges from ion movements across neural membranes. Since the voltage recorded by LFP electrodes reflects the summed ...