Name: construction of an improved multi-tetrode hyperdrive for large-scale neural recording in behaving rats
Uploaded: 2018-05-09T15:00:00
Description: Watch this Scientific Journal Video about Construction of an Improved Multi-Tetrode Hyperdrive for Large-Scale Neural Recording in Behaving Rats at JoVE.com

Agradecemos al laboratorio de Moser en el Instituto Kavli centro de Neurociencia de sistemas y computación neuronal, Universidad Noruega de ciencia y tecnología, para la crónica neuronal grabación procedimientos en ratas. Este trabajo fue apoyado por subvenciones de NIH NS098146 R21 y humano frontera ciencia programa a largo plazo becas LT000211/2016-L a L. Lu.

1. estereolitografía de modelos 3D
<ol><li>Utilice técnicas stereolithographic para imprimir el hiperimpulsor piezas y accesorios. Cada hiperimpulsor está compuesta por dieciocho lanzaderas, dieciocho traslados de pernos y cada uno de los otros pedazos de plástico (figura 1). Nota: Los accesorios no son parte del hiperimpulsor pero son necesarios para la construcción de un hiperimpulsor.</li>
</ol>2. preparación de accesorios (figura 2</s...

<ol>
	<li>O'Keefe, J., Recce, M. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Phase+relationship+between+hippocampal+place+units+and+the+EEG+theta+rhythm.">Phase relationship between hippocampal place units and the EEG theta rhythm.</a> Hippocampus. 3 (3), 317-330 (1993).</li><li>Wilson, M. A., McNaughton, B. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Dynamics+of+the+hippocampal+ensemble+code+for+space.">Dynamics of the hippocampal ensemble code for space.</a> Science. 261 (5124), 1055-1058 (1993).</li><li>Gothard, K. M., Skaggs, W. E., Moore, K. M., McNaughton, B. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Binding+of+hippocampal+CA1+neural+activity+to+multiple+reference+frames+in+a+landmark-based+navigation+task.">Binding of hippocampal CA1 neural activity to multiple reference frames in a landmark-based navigation task.</a> J Neurosci. 16 (2), 823-835 (1996).</li><li>Gray, C. M., Maldonado, P. E., Wilson, M., McNaughton, B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Tetrodes+markedly+improve+the+reliability+and+yield+of+multiple+single-unit+isolation+from+multi-unit+recordings+in+cat+striate+cortex.">Tetrodes markedly improve the reliability and yield of multiple single-unit isolation from multi-unit recordings in cat striate cortex.</a> J Neurosci Methods. 63 (1-2), 43-54 (1995).</li><li>Buzsaki, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Large-scale+recording+of+neuronal+ensembles.">Large-scale recording of neuronal ensembles.</a> Nat Neurosci. 7 (5), 446-451 (2004).</li><li>Fyhn, M., Hafting, T., Witter, M. P., Moser, E. I., Moser, M. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Grid+cells+in+mice.">Grid cells in mice.</a> Hippocampus. 18 (12), 1230-1238 (2008).</li><li>Skaggs, W. E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=EEG+sharp+waves+and+sparse+ensemble+unit+activity+in+the+macaque+hippocampus.">EEG sharp waves and sparse ensemble unit activity in the macaque hippocampus.</a> J Neurophysiol. 98 (2), 898-910 (2007).</li><li>Guo, P., Pollack, A. J., Varga, A. G., Martin, J. P., Ritzmann, R. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Extracellular+wire+tetrode+recording+in+brain+of+freely+walking+insects.">Extracellular wire tetrode recording in brain of freely walking insects.</a> J Vis Exp. (86), (2014).</li><li>Knierim, J. J., McNaughton, B. L., Poe, G. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Three-dimensional+spatial+selectivity+of+hippocampal+neurons+during+space+flight.">Three-dimensional spatial selectivity of hippocampal neurons during space flight.</a> Nat Neurosci. 3 (3), 209-210 (2000).</li><li>Leutgeb, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Independent+codes+for+spatial+and+episodic+memory+in+hippocampal+neuronal+ensembles.">Independent codes for spatial and episodic memory in hippocampal neuronal ensembles.</a> Science. 309 (5734), 619-623 (2005).</li><li>Lansink, C. S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+split+microdrive+for+simultaneous+multi-electrode+recordings+from+two+brain+areas+in+awake+small+animals.">A split microdrive for simultaneous multi-electrode recordings from two brain areas in awake small animals.</a> J Neurosci Methods. 162 (1-2), 129-138 (2007).</li><li>Kloosterman, F., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Micro-drive+array+for+chronic+in+vivo+recording:+drive+fabrication.">Micro-drive array for chronic in vivo recording: drive fabrication.</a> J Vis Exp. (26), (2009).</li><li>. Google Patents Available from: <a target="_blank" href="https://www.google.com/patents/US5928143">https://www.google.com/patents/US5928143</a> (1999)</li><li>Redish, A. D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Independence+of+firing+correlates+of+anatomically+proximate+hippocampal+pyramidal+cells.">Independence of firing correlates of anatomically proximate hippocampal pyramidal cells.</a> J Neurosci. 21 (5), RC134 (2001).</li><li>Schmitzer-Torbert, N., Redish, A. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Neuronal+activity+in+the+rodent+dorsal+striatum+in+sequential+navigation:+separation+of+spatial+and+reward+responses+on+the+multiple+T+task.">Neuronal activity in the rodent dorsal striatum in sequential navigation: separation of spatial and reward responses on the multiple T task.</a> J Neurophysiol. 91 (5), 2259-2272 (2004).</li><li>Nguyen, D. P., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Micro-drive+array+for+chronic+in+vivo+recording:+tetrode+assembly.">Micro-drive array for chronic in vivo recording: tetrode assembly.</a> J Vis Exp. (26), (2009).</li><li>Chang, E. H., Frattini, S. A., Robbiati, S., Huerta, P. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Construction+of+microdrive+arrays+for+chronic+neural+recordings+in+awake+behaving+mice.">Construction of microdrive arrays for chronic neural recordings in awake behaving mice.</a> J Vis Exp. (77), e50470 (2013).</li><li>Vandecasteele, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Large-scale+recording+of+neurons+by+movable+silicon+probes+in+behaving+rodents.">Large-scale recording of neurons by movable silicon probes in behaving rodents.</a> J Vis Exp. (61), e3568 (2012).</li><li>Siegle, J. H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Chronically+implanted+hyperdrive+for+cortical+recording+and+optogenetic+control+in+behaving+mice.">Chronically implanted hyperdrive for cortical recording and optogenetic control in behaving mice.</a> Conf Proc IEEE Eng Med Biol Soc. 2011, 7529-7532 (2011).</li><li>Brunetti, P. M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Design+and+fabrication+of+ultralight+weight,+adjustable+multi-electrode+probes+for+electrophysiological+recordings+in+mice.">Design and fabrication of ultralight weight, adjustable multi-electrode probes for electrophysiological recordings in mice.</a> J Vis Exp. (91), e51675 (2014).</li><li>. Google Patents Available from: <a target="_blank" href="https://www.google.com/patents/US4575330">https://www.google.com/patents/US4575330</a> (1986)</li><li>Ludvig, N., Potter, P. E., Fox, S. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Simultaneous+single-cell+recording+and+microdialysis+within+the+same+brain+site+in+freely+behaving+rats:+a+novel+neurobiological+method.">Simultaneous single-cell recording and microdialysis within the same brain site in freely behaving rats: a novel neurobiological method.</a> J Neurosci Methods. 55 (1), 31-40 (1994).</li></ol>

Aquí, describimos el proceso de construcción de un hiperimpulsor desarrollado recientemente conformado por dieciocho tetrodos independientemente móviles. La unidad puede ser construida de piezas asequibles compradas en muchas tiendas de hardware disponibles, combinados con componentes creados por stereolithographic impresión. El hiperimpulsor puede ser crónicamente implantado en el cráneo de una rata utilizando procedimientos quirúrgicos estándar y es capaz de grabar actividad neuronal extracelular mientras que e...

En el campo de la neurociencia de sistemas, los científicos estudian los correlatos neurales subyacentes a los procesos cognitivos como la navegación espacial, memoria y toma de decisiones. Para este tipo de estudios, es fundamental para monitorear la actividad de muchas neuronas individuales en comportamiento animal. En las últimas décadas, se hicieron dos importantes avances para satisfacer las necesidades experimentales de grabación extracelular neuronal en animales pequeños1,2,3. Primero fue el desarrollo de la tetrodo, un paquete de cuatro microhilos utilizada para registrar la actividad neuronal de neuronas simultáneamente1,2,4. Las amplitudes de señal diferencial de actividad a través de los cuatro canales de un tetrodo permite el aislamiento de la actividad de neuronas individuales de muchas células simultáneamente registrado5. Además, la naturaleza flexible de los microhilos permite una mayor estabilidad de la tetrodo minimizando el desplazamiento relativo entre el tetrodo y la población celular. Tetrodos ahora son ampliamente utilizados en lugar de un electrodo individual para muchos estudios del cerebro en varias especies, incluyendo roedores1,2,6, primates7y8de insectos. En segundo lugar el desarrollo de un hiperimpulsor llevaba tetrodos independientemente móviles múltiples, que permite el monitoreo simultáneo de la actividad neural de grandes poblaciones de neuronas de grabación de múltiples localizaciones3, 9,10,11,12.
La disponibilidad de un dispositivo de grabación multi-tetrodo fiable y asequible para los pequeños animales es limitada. El hiperimpulsor clásico, desarrollado inicialmente por Bruce McNaughton13, se ha utilizado con éxito para grabaciones neurales en comportarse libremente las ratas en muchos laboratorios en las últimos dos décadas9,10,14, 15. sin embargo, por razones técnicas, los componentes originales necesarios para construir la unidad de McNaughton ahora son muy difíciles de conseguir y no son compatibles con interfaces de adquisición de datos recientemente mejorada. El otro diseño bien aceptado de hiperimpulsor requiere los microdrives para individualmente handcrafted, que podría producir resultados inconsistentes y consumir mucho tiempo12. Para grabar la actividad de los nervios de varias regiones del cerebro en ratas comportarse, hemos desarrollado un nuevo hiperimpulsor stereolithographic tecnología. Intentamos satisfacer los siguientes requisitos: (1) el nuevo hiperimpulsor debe permitir desplazamiento preciso de tetrodos en el cerebro y proporcionar grabación estable de varias regiones de destino; (2) el hiperimpulsor nuevo debe ser compatible con el sistema quickclip magnético desarrollado recientemente para permitir la conexión fácil; y (3) el nuevo hiperimpulsor puede ser reproducido con exactitud con materiales fácilmente disponibles. Presentamos una técnica para construir el hiperimpulsor para imprimir 3D que contiene dieciocho tetrodos independientemente móviles, basados en el diseño de McNaughton. En el protocolo, se describen los detalles del proceso de fabricación del nuevo hiperimpulsor, que hemos utilizado con éxito para registros potenciales de acción de la solo-neurona y los potenciales de campo local de las cortezas entorrinal postrhinal y medial durante semanas en una libre rata de comportarse durante las tareas de forrajeo naturales.

<table>
	<tbody>
		<tr>
			<td>Welding rod</td>
			<td>Blue Demon</td>
			<td>ER308L-035-01T</td>
			<td>Stainless steel, 0.035&#34; in diameter</td>
		</tr>
		<tr>
			<td>Screw</td>
			<td>McMaster</td>
			<td>91771A060</td>
			<td>Stainless steel, flat head, 0-80&#160;thread,&#160;5/8&#34;&#160;in length</td>
		</tr>
		<tr>
			<td>Screw</td>
			<td>McMaster</td>
			<td>91772A051</td>
			<td>Stainless steel, pan head, 0-80&#160;thread,&#160;5/32&#34;&#160;in length</td>
		</tr>
		<tr>
			<td>Screw</td>
			<td>McMaster</td>
			<td>92196A056</td>
			<td>Stainless steel, socket head, 0-80&#160;thread,&#160;5/16&#34;&#160;in length</td>
		</tr>
		<tr>
			<td>Screw</td>
			<td>McMaster</td>
			<td>92196A055</td>
			<td>Stainless steel, socket head, 0-80&#160;thread,&#160;1/4&#34;&#160;in length</td>
		</tr>
		<tr>
			<td>Screw</td>
			<td>McMaster</td>
			<td>95868A131</td>
			<td>Nylon,&#160; socket head, 2-56&#160;thread,&#160;3/16&#34;&#160;in length, black</td>
		</tr>
		<tr>
			<td>Screw nut</td>
			<td>McMaster</td>
			<td>90730A001</td>
			<td>Stainless steel, narrow hex,&#160; 0-80&#160;thread</td>
		</tr>
		<tr>
			<td>Shoulder screw</td>
			<td>McMaster</td>
			<td>90298A213</td>
			<td>Stainless steel, 8-32 thread, 3/16&#34; in diameter, 1/4&#34; in length</td>
		</tr>
		<tr>
			<td>Cup screw</td>
			<td>McMaster</td>
			<td>92313A105</td>
			<td>Stainless steel, 4-40 thread, 3/16&#34; in length</td>
		</tr>
		<tr>
			<td>Thumb screw</td>
			<td>McMaster</td>
			<td>94323A592</td>
			<td>Nylon, 8-32&#160;thread,&#160;3/8&#34;&#160;in length, black</td>
		</tr>
		<tr>
			<td>Magnet</td>
			<td>Apex</td>
			<td>M3X1MMDI</td>
			<td>Neodymium, 3 mm X 1 mm disc</td>
		</tr>
		<tr>
			<td>Metal tubing</td>
			<td>Small Parts</td>
			<td>B00137QHNS</td>
			<td>Stainless steel, 23 gauge, 0.0253&#34; OD, 0.013&#34; ID, 0.006&#34; wall</td>
		</tr>
		<tr>
			<td>Metal tubing</td>
			<td>New England Small Tube</td>
			<td>Custom-made</td>
			<td>Stainless steel, 30 gauge, 0.012/0.0125&#34; OD, 0.007/0.008&#34; ID, full hard</td>
		</tr>
		<tr>
			<td>Heat-shrink tubing</td>
			<td>McMaster</td>
			<td>7856K72</td>
			<td>0.09&#34; ID before shrinking, blue</td>
		</tr>
		<tr>
			<td>Silicone tubing</td>
			<td>A-M Systems</td>
			<td>807300</td>
			<td>0.040&#34; ID, 0.085&#34; OD</td>
		</tr>
		<tr>
			<td>Polyimide tubing</td>
			<td>A-M Systems</td>
			<td>823400</td>
			<td>0.0045&#34; ID, 0.0005&#34; wall</td>
		</tr>
		<tr>
			<td>Ground wire</td>
			<td>A-M Systems</td>
			<td>791500</td>
			<td>0.005&#34; bare, 0.008&#34; coated, half hard</td>
		</tr>
		<tr>
			<td>Tetrode wire</td>
			<td>California Fine Wire</td>
			<td>Custom-made</td>
			<td>0.0007&#34; in diameter, platinum-iridium (90%-10%), HML and VG coating</td>
		</tr>
		<tr>
			<td>EIB</td>
			<td>Neuralynx</td>
			<td></td>
			<td>EIB-72-QC-Large</td>
		</tr>
		<tr>
			<td>Gold pins</td>
			<td>Neuralynx</td>
			<td></td>
			<td>large EIB pins</td>
		</tr>
		<tr>
			<td>Tap</td>
			<td>Balax</td>
			<td>01302-000</td>
			<td>M1.2 thread size</td>
		</tr>
		<tr>
			<td>Tap</td>
			<td>McMaster</td>
			<td>2522A811</td>
			<td>0-80 thread size, bottoming</td>
		</tr>
		<tr>
			<td>Tap</td>
			<td>McMaster</td>
			<td>2522A771</td>
			<td>0-80 thread size, plug</td>
		</tr>
		<tr>
			<td>Tap</td>
			<td>McMaster</td>
			<td>26955A94</td>
			<td>3/8&#34;-24&#160;thread size, bottoming</td>
		</tr>
		<tr>
			<td>Tap</td>
			<td>McMaster</td>
			<td>2522A713</td>
			<td>2-56&#160;thread size</td>
		</tr>
		<tr>
			<td>Tap</td>
			<td>McMaster</td>
			<td>2522A715</td>
			<td>4-40&#160;thread size</td>
		</tr>
		<tr>
			<td>Tap</td>
			<td>McMaster</td>
			<td>2522A718</td>
			<td>8-32&#160;thread size</td>
		</tr>
		<tr>
			<td>Die</td>
			<td>McMaster</td>
			<td>2576A457</td>
			<td>3/8&#34;-24&#160;thread size, 1&#34; OD</td>
		</tr>
		<tr>
			<td>Drill bit</td>
			<td>McMaster</td>
			<td>30585A82</td>
			<td>Wire gauge&#160;65,&#160;0.035&#34; in diameter</td>
		</tr>
		<tr>
			<td>Drill bit</td>
			<td>McMaster</td>
			<td>30585A83</td>
			<td>Wire gauge&#160;66,&#160;0.033&#34; in diameter</td>
		</tr>
		<tr>
			<td>Drill bit</td>
			<td>McMaster</td>
			<td>30585A87</td>
			<td>Wire gauge&#160;70,&#160;0.028&#34; in diameter</td>
		</tr>
		<tr>
			<td>Drill bit</td>
			<td>McMaster</td>
			<td>30585A88</td>
			<td>Wire gauge&#160;71,&#160;0.026&#34; in diameter</td>
		</tr>
		<tr>
			<td>Drill bit</td>
			<td>McMaster</td>
			<td>30585A91</td>
			<td>Wire gauge&#160;73,&#160;0.024&#34; in diameter</td>
		</tr>
		<tr>
			<td>Drill bit</td>
			<td>McMaster</td>
			<td>8870A23</td>
			<td>3/16&#34;&#160;in diameter</td>
		</tr>
		<tr>
			<td>Dremel disc</td>
			<td>Wagner</td>
			<td>31M</td>
			<td>Diamond coated, 22 mm in diameter, 0.17 mm in thickness</td>
		</tr>
		<tr>
			<td>Steel wire</td>
			<td>Precision Brand</td>
			<td>21212</td>
			<td>0.012&#34; in diameter, full hard</td>
		</tr>
		<tr>
			<td>Steel wire</td>
			<td>Precision Brand</td>
			<td>21007</td>
			<td>0.007&#34; in diameter, full hard</td>
		</tr>
		<tr>
			<td>Steel wire</td>
			<td>A-M Systems</td>
			<td>792700</td>
			<td>0.003&#34; in diameter, half hard</td>
		</tr>
		<tr>
			<td>Super glue</td>
			<td>Loctite</td>
			<td>LT-40640</td>
			<td># 406</td>
		</tr>
		<tr>
			<td>Super glue</td>
			<td>Loctite</td>
			<td>LT-41550</td>
			<td># 415</td>
		</tr>
		<tr>
			<td>Dental acrylic powder&#160;</td>
			<td>Teets</td>
			<td>223-3773</td>
			<td>Coral</td>
		</tr>
		<tr>
			<td>Dental acrylic liquid</td>
			<td>Teets</td>
			<td>223-4003</td>
			<td></td>
		</tr>
	</tbody>
</table>

construction of an improved multi-tetrode hyperdrive for large-scale neural recording in behaving rats

Monitoreo de los patrones de actividad de una gran población de neuronas durante muchos días en animales despiertos es una técnica valiosa en el campo de la neurociencia de sistemas. Un componente clave de esta técnica consiste en la colocación precisa de múltiples electrodos en regiones cerebrales deseadas y el mantenimiento de su estabilidad. Aquí, describimos un protocolo para la construcción de un hiperimpulsor 3D imprimible, que incluye dieciocho tetrodos independientemente ajustables y está diseñado específicamente para en vivo grabación extracelular neuronal en comportarse libremente las ratas. Los tetrodos a los microdrives o pueden ser avanzados individualmente en varias regiones del cerebro a lo largo de la pista, o pueden utilizarse para colocar una matriz de electrodos en un área más pequeña. Los tetrodos múltiples permiten un examen simultáneo de action potentials de docenas de neuronas individuales, así como potenciales de campo local de las poblaciones de neuronas en el cerebro durante el comportamiento activo. Además, el diseño proporciona 3D más sencillo elaborar software que puede modificarse fácilmente para diferentes necesidades experimentales.

Utilizamos un hiperimpulsor recién construido para obtener resultados de los ensayos. La unidad fue equipada con tetrodos de ø 17 μm (0,0007"), alambre recubierto de poliamida Platino-Iridio (90% - 10%). Las puntas de los tetrodos fueron plateadas en la solución de negro de platino para reducir la impedancia del electrodo a entre 100 y 200 kΩ a 1 kHz. El hiperimpulsor fue implantado 4,6 mm a la izquierda de la línea media y 0,5 mm anterior al sino transversal sobre el cráneo de un ...

Watch this Scientific Journal Video about Construction of an Improved Multi-Tetrode Hyperdrive for Large-Scale Neural Recording in Behaving Rats at JoVE.com

Construction of an Improved Multi-Tetrode Hyperdrive for Large-Scale Neural Recording in Behaving Rats

Presentamos la construcción de un hiperimpulsor 3D imprimibles con dieciocho tetrodos independientemente ajustables. El hiperimpulsor está diseñado para registrar la actividad cerebral en comportarse libremente las ratas durante un período de varias semanas.

Construcción de un hiperimpulsor mejorado del tetrodo múltiples de grabación Neural a gran escala en comportarse ratas

Monitoring the activity patterns of a large population of neurons over many days in awake animals is a valuable technique in the field of systems ...

The overall goal of this procedure is to construct a recording device with multiple independently adjustable electrodes for the examination of brain activity in freely behaving rats. So this method is very exciting because it will help answer several questions related to special navigation, decision making, and other cognitive processes. The main advantage of this hyperdrive is that it provides reliable neuro recording in the brain using materials that are easy to obtain.Although this method was designed to be used specifically with rats, it can be used with any species of similar or larger head sizes such as non-human primates, thereby allowing investigations of many species. Those new to this method might struggle with the nuance involved in the preparation of the steps cause there's a certain level of experience and accuracy that's required to develop these tricks that can make a successful drive. Begin by expanding the holes in the 3D printed core using different sized drill bits.Use a diameter of 0.61 millimeter for the 12 ground wire through holes. For the 18 tetrode through holes, first use a 0.66 millimeter bit and then widen with a 0.71 millimeter bit. A 0.84 millimeter diameter bit is used for the 18 guide rod blind holes.Next, thread the two through holes on top of the core and the remaining eight blind holes with a 0.80 tap. Use a bottoming tap for the blind holes. Create external threads at the base of the core using a 3/8-24 die.Adjust the die properly so the hyperdrive nut will fit over the new threads. Depending on the desired number of ground wires, insert multiple six millimeter long segments of 23 gauge metal tubing into the ground wire holes in the core gluing them if necessary. File the outer ends of the ground wire cannulas until they are flushed with the core and then clean the cannulas with a 0.30 millimeter diameter steel wire.Next, fully insert 18 08015.88 millimeter long flathead screws head down into the slots in the core. Do not bend the screws or damage the threads during this process. Using the rod positioning complex into the core station, position 18 17 millimeter segments of 0.89 millimeter diameter welding rod over the guide rod holes in the core and hammer them down about five millimeters until flushed with the screws.Correct the positions of the welding rods and screws if necessary then tighten the central shoulder screw and the surrounding six screws in the rod positioning complex to secure the outward directions of the rods in the core. Screw the nut onto the core with the rod positioning complex and fit the core into the hyperdrive holder to allow easier positioning under a stereoscope. Fill the slots with dilute dental cement to secure the screws to the core.Fill two to three slots at a time before the dental cement gets too thick. Scrape away any excess dental cement on the core to maintain a proper fit with the shield then allow to air dry for 15 minutes. Next, glue the screws and rods into the core with thin super glue and allow to dry for 15 minutes.Clean and expand the two outer holes in the 3D printed shuttle with drill bits. Use a 0.61 millimeter diameter bit for the smaller hole and a 0.89 millimeter bit for the larger hole. Insert the shuttle bolt into the bolt holder base ensuring the proper orientation.Then close the bolt holder lid. Hold the bolt holder tightly and thread slowly through the hole in the lid with a 0.80 tap. Tap two or three times until smooth.Then insert the shuttle bolt into the shuttle from the side with the smaller opening. Place the shuttle-shuttle bolt complex upside down in the microdrive assembly station base. Next, smooth both ends of a 15 millimeter segment of 23 gauge metal tubing, then position the tubing over the 0.61 millimeter diameter hole guided by the slot in the station lid.Hammer the cannula into the hole until the upper end is flushed with the station lid. Remove the outer half of the upper tip of the cannula with a sanding wheel. Clean the cannula with a 0.30 millimeter diameter metal wire.Then glue the cannula onto the shuttle using thin super glue making sure not to glue the shuttle bolts to the shuttle. Prepare at least 18 microdrives. Test the microdrives on the microdrive rack.Make sure that the shuttle bolt can rotate smoothly in the shuttle and that the entire microdrive moves freely along the length of the threaded rod. To insert guide cannulas into the hyperdrive core, begin by removing the heat shrink tubes and slide a four millimeter segment of silicone tubing along the bundle to the soldered-unsoldered border. Wedge the slit in the hyperdrive spacer to widen the central hole allowing the spacer to slip around the silicone tube.Remove the wedge when the spacer sits at the center of the silicone tube. Next, organize the positions of the guide cannulas in the bundle by placing 10 centimeter long segments of 0.18 millimeter diameter metal wire through each cannula into a specific tetrode hole in the hyperdrive core preventing any crossover of the wires or cannulas in the process. Bend the end of the wires to hold them in place.Push the cannulas through their respective holes in the core being careful to avoid bending or crossing between them until the free end of each cannula is at least two millimeters outside the upper end of the tetrode hole. Secure the spacer by screwing the nut onto the core being careful to prevent the spacer from rotating. Apply a drop of very dilute dental cement from the top of the core onto the junction of the cannulas to secure their relative positions.Cut the guide wires from the soldered end of the bundle and remove them from the cannulas by retracting from the free end. Load the microdrives slowly and carefully onto each threaded rod of the core. Confirm that the 23 gauge microdrive cannula goes into the tetrode hole smoothly, the 30 gauge guide cannula goes into the 23 gauge microdrive cannula smoothly, and the shuttle bolt turn smoothly along the threaded rod.Screw the microdrives down to one to 1.5 millimeters above the lower end of the threaded rods. Then cut 18 pieces of polyamide tubing into 43 millimeter segments which is the length of the guide cannula bundle plus seven millimeters. Clean each tube with a 0.8 millimeter diameter steel wire.Invert the core, insert the polyamide tubes carefully into the guide cannulas from the soldered end and push them all the way in. Then flip the core upright and glue the upper end of the polyamide tube onto the microdrive cannula with thick super glue. Place the core upside down and let the glue dry for 15 minutes.After drying, cut the extra polyamide tubing at the upper end leaving 0.5 to one millimeter outside the microdrive cannula. To assemble the ground wires, first cut lengths of 25 to 30 millimeters from coated steel wire. Then strip two millimeters of the plastic insulation from both tips of the wires and insert one end of each into both sides of a six to eight millimeter long 30 gauge cannula.Flatten this end of each cannula to secure the connection to their respective wires. Finally, insert the round end of the 30 gauge cannula into the upper end of the ground wire cannula in the core and press to make the insertion tight. Then complete assembly of the multi-tetrode hyperdrive according to the instructions in the written protocol.This scatter plot shows the relationship between peak to peak amplitudes of spikes recorded from two electrodes of a tetrode located in the post rhinal cortex. Each dot corresponds to one spike. Clusters of spikes are likely to originate from the same cell.Four clusters are color coded as seen here. The mean spike waveforms from all four tetrode channels of the color coded cells shown in the previous scatter plot are seen here. Traces of local field potential in the theta frequency range recorded simultaneously from four different tetrodes located in the medial entorhinal cortex when the rat was freely foraging are seen here.While attempting this procedure, it's important to work with precision throughout the entire procedure to ensure that all parts fit together properly. Also use care and wear proper PPE when working with the demo tool to avoid injury. After watching this video, you should have a good understanding of how to construct these improved hyperdrives carrying multiple tetrodes for chronic neuro recordings in behaving rats.

Research

JoVE Journal

Neuroscience

Design and Construction of a Cost Effective Headstage for Simultaneous Neural Stimulation and Recording in the Water Maze

Diseño y construcción de un cabezal rentable para la estimulación simultánea neural y de grabación en el laberinto de agua

Headstage preamplifiers and source followers are commonly used to study neural activity in behavioral neurophysiology experiments. Available commercial ...

Investigación

Neurociencias

Recording Large-scale Neuronal Ensembles with Silicon Probes in the Anesthetized Rat

Grabación a gran escala conjuntos neuronales con sondas de silicona en la rata anestesiada

Large scale electrophysiological recordings from neuronal ensembles offer the opportunity to investigate how the brain orchestrates the wide variety of ...

Large-scale Recording of Neurons by Movable Silicon Probes in Behaving Rodents

A gran escala de grabación de las neuronas por medio de sondas de silicio móviles en comportarse roedores

A major challenge in neuroscience is linking behavior to the collective activity of neural assemblies. Understanding of input-output relationships of ...

Preparation of an Awake Mouse for Recording Neural Responses and Injecting Tracers

Preparación de un ratón para la grabación de Despierta respuestas neuronales y de inyección de trazadores

It is well known that anesthesia alters neural response properties in various regions of the brain.13.  In the auditory system, fundamental response ...

Design and Assembly of an Ultra-light Motorized Microdrive for Chronic Neural Recordings in Small Animals

Diseño y montaje de un Microdrive ultraligero motorizado para crónicos Grabaciones neuronales en Pequeños Animales

The ability to chronically record from populations of neurons in freely behaving animals has proven an invaluable tool for dissecting the function of ...

Multi-unit Recording Methods to Characterize Neural Activity in the Locust (Schistocerca Americana) Olfactory Circuits

Multi-unit Recording Methods to Characterize Neural Activity in the Locust Schistocerca Americana Olfactory Circuits

Varias unidades Métodos de grabación para caracterizar la actividad neuronal en el Locust (<em&gt; Schistocerca americana</em&gt;) Circuitos olfativas

Detection and interpretation of olfactory cues are critical for the survival  of many organisms. Remarkably, species across phyla have strikingly similar ...

Neural Circuit Recording from an Intact Cockroach Nervous System

Neural Circuito de grabación de una cucaracha sistema nervioso intacto

The cockroach ventral nerve cord preparation is a tractable system for neuroethology experiments, neural network modeling, and testing the physiological ...

Electrophysiological Method for Recording Intracellular Voltage Responses of Drosophila Photoreceptors and Interneurons to Light Stimuli In Vivo

Electrophysiological Method for Recording Intracellular Voltage Responses of Drosophila Photoreceptors and Interneurons to Light Stimuli In Vivo

Método electrofisiológico para registrar las respuestas de voltaje intracelular<em&gt; Drosophila</em&gt; Los fotorreceptores y interneuronas a la luz Estímulos<em&gt; En Vivo</em

Voltage responses of insect photoreceptors and visual interneurons can be accurately recorded with conventional sharp microelectrodes. The method ...

Recording Spatially Restricted Oscillations in the Hippocampus of Behaving Mice

Grabación espacial restringido a oscilaciones en el hipocampo de ratones de comportarse

The local field potential (LFP) emerges from ion movements across neural membranes. Since the voltage recorded by LFP electrodes reflects the summed ...