Det overordnede mål med denne procedure er at beskrive en metode til at beskrive frisk poreopløsning fra et cementiscitious basissystem af plast ved hjælp af et nitrogengasfilter i rustfrit stål og at måle poreopløsningens kemiske sammensætning ved hjælp af et energispredningsnde røntgenfluorescens benchtop spektrometer. Den kemiske ioniske sammensætning målt ved XRF kan anvendes beregne den elektriske resistivitet af pore opløsning, som derefter kan anvendes i forbindelse med den elektriske resistivitet af beton til at bestemme dannelsen faktor. Da XRF er en almindeligt anvendt enhed i cementindustrien, kan denne metode potentielt gøre det muligt for cementproducenter at bruge et værktøj, de allerede har til rådighed, til at give flere oplysninger om den cementitious poreopløsning såsom den ioniske sammensætning og resistivitet til mange anvendelser og en lavere omkostninger og testtid end konventionelle metoder.
I bund og grund kunne denne metode udvide ansøgningerne om anvendelse af en XRF til en række cement- og betonundersøgelser. For at begynde denne procedure skal du kontrollere, at de enkelte komponenter i poreopløsningsudsugningen er rene og tørre. Derefter samles poreopløsningsudsugningen i henhold til producentens anvisninger.
Kontroller, at der ikke er nogen synlige deformiteter i cellulosefilteret. Dernæst tilsættes den friske pasta i hovedkammeret. Sørg for at efterlade mindst en centimeter fra toppen fri.
Derefter tilslut pore opløsning extractor til nitrogenkilden og forsegle hovedkammeret. Brug en ren beholder til at indsamle pore opløsningen. Åbn ventilen af nitrogentanken.
Brug tryk gage til at regulere trykket til 200 kilopascal. Bevar konstant tryk i en periode på fem minutter. Poreopløsningen overføres til en 5 millilitersprøjte.
Sørg for at skubbe alle luftbobler ud i sprøjten. Forsegle sprøjten med en kanylehætte. Test straks eller opbevare inde i en fem grader C kammer indtil test.
Saml løsningen test containere. Sørg for, at plastcylindrene er rene og tørre. Anstænke polypropylenfilmen oven på den større cylinder.
Sæt den mindre cylinder oven på den større cylinder. Tryk ned på den mindre cylinder, trykke filmen i mellem. Sørg for, at filmen er glat og ikke har tårer eller deformationer.
De vigtigste ioniske arter til stede i pore opløsning er nødvendige for at beregne den elektriske resistivitet pore opløsning er natrium, kalium, calcium, sulfat, og hydroxid. Resultaterne fra XRF-analysen vil vise koncentrationen af natrium-, kalium-, calcium- og sulfidioner. Der indsprøjtes mindst to gram poreopløsningsprøve i den samlede testbeholder.
Beholderen forsegles med et låg. Lad beholderen med opløsningen være på en køkkenrulle i to minutter. Kontroller, at filmen ikke har nogen lækage.
Prøven anbringes i XRF-prøveholderen, og XRF lukkes. Analysér prøven for ionisk sammensætning. Derefter udføres en række beregninger for at opnå koncentrationen af sulfat- og hydroxidionerne og poreopløsningens elektriske resistivitet.
Brug først stoichiometri til at beregne koncentrationen af sulfationerne baseret på koncentrationen af de sulfidioner, der påvises af XRF. Brug derefter en ladningsbalance til at beregne koncentrationen af hydroxider i poreopløsningen. Efter at have opnået alle de ioniske koncentrationer af de fem ioniske arter betragtes, konvertere ioniske koncentrationer fra dele per million til muldvarp per liter under forudsætning af en tæthed på 1, 000 gram per liter.
Og endelig, bruge den model, der er udviklet af Snyder og andre til at beregne den elektriske resistivitet af pore opløsning. Et repræsentativt resultat for den udtrykte poreopløsning i den forseglede sprøjte vises for en cementpande med et vand-til-cement-forhold på 0,36 ved 10 minutters udtryk. En tabel med repræsentative resultater for ionisk sammensætning og resistivitet vises for en cementpap med et vand-til-cement-forhold på 0,36 ved 10 minutters udtryk.
Efter at have set denne video, bør du have en god forståelse af, hvordan man udtrykker frisk pore opløsning fra en plast pasta prøve ved hjælp af en tryk nitrogen gasfilter og til at måle pore løsning kemiske sammensætning ved hjælp af en energi dispersive X-ray fluorescens benchtop spektrometer. Ud fra de målte værdier af XRF, bør du i stand til at opnå ioniske koncentrationer af de vigtigste ioniske arter til stede i pore opløsning og til at beregne den elektriske resistivitet pore opløsning. Disse oplysninger kan i sidste ende anvendes i forbindelse med den elektriske resistivitet af beton til at beregne dannelsesfaktoren og til andre konkrete holdbarhedsapplikationer og konkrete undersøgelser.
Hvis den udføres korrekt og sikkert, bør denne procedure ikke tage længere end 20 minutter fra start til.