Name: determination of aggregate surface morphology at the interfacial transition zone (itz)
Uploaded: 2019-12-16T15:00:00
Description: Watch this Scientific Journal Video about Determination of Aggregate Surface Morphology at the Interfacial Transition Zone ITZ at JoVE.com

The authors gratefully acknowledge the financial support from the National Key R&#38;D Program of China (2017YFB0309904), National Natural Science Foundation of China (Grant Nos. 51508090 and 51808188), 973 Program (2015CB655100), State Key Laboratory of High-Performance Civil Engineering Materials (2016CEM005). Also, greatly appreciate Jiangsu Research Institute of Building Science Co., Ltd and the State Key Laboratory of High-Performance Civil Engineering Materials for funding the research project.

1. Preparation of the model concrete with a single ceramic particle
<ol>
	<li>Mold preparation
	<ol>
		<li>Use a brush to clean the mold (25 mm x 25 mm x 25 mm) and ensure that the inner surfaces of the mold are impurity-free.</li>
		<li>Use another brush to uniformly apply diesel oil on the inner surfaces of the mold for easier mold-release. 
		NOTE: Here, we did not use the common mold for mortar or concrete preparation. As the ceramic particle is around 15 mm in diameter, a cubic plastic mold around 30 mm in le...

<ol>
	<li>Scrivener, K. L., Crumbie, A. K., Laugesen, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+Interfacial+Transition+Zone+(ITZ)+Between+Cement+Paste+and+Aggregate+in+Concrete.">The Interfacial Transition Zone (ITZ) Between Cement Paste and Aggregate in Concrete.</a> Interface Science. 12 (4), 411-421 (2004).</li><li>Scrivener, K. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Backscattered+electron+imaging+of+cementitious+microstructures:+understanding+and+quantification.">Backscattered electron imaging of cementitious microstructures: understanding and quantification.</a> Cement and Concrete Composites. 26 (8), 935-945 (2004).</li><li>Houst, Y. F., Sadouki, H., Wittmann, F. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Influence+of+aggregate+concentration+on+the+diffusion+of+CO2+and+O2.">Influence of aggregate concentration on the diffusion of CO2 and O2.</a> Concrete. , 279-288 (1993).</li><li>Halamickova, P., Detwiler, R. J., Bentz, D. P., Garboczi, E. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Water+permeability+and+chloride+ion+diffusion+in+portland+cement+mortars:+Relationship+to+sand+content+and+critical+pore+diameter.">Water permeability and chloride ion diffusion in portland cement mortars: Relationship to sand content and critical pore diameter.</a> Cement &amp; Concrete Research. 25 (4), 790-802 (1995).</li><li>Yang, Z., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=In-situ+X-ray+computed+tomography+characterisation+of+3D+fracture+evolution+and+image-based+numerical+homogenisation+of+concrete.">In-situ X-ray computed tomography characterisation of 3D fracture evolution and image-based numerical homogenisation of concrete.</a> Cement and Concrete Composites. 75, 74-83 (2017).</li><li>Skar&#380;y&#324;ski, &. #. 3. 2. 1. ;., Nitka, M., Tejchman, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Modelling+of+concrete+fracture+at+aggregate+level+using+FEM+and+DEM+based+on+X-ray+&#181;CT+images+of+internal+structure.">Modelling of concrete fracture at aggregate level using FEM and DEM based on X-ray &#181;CT images of internal structure.</a> Engineering Fracture Mechanics. 147, 13-35 (2015).</li><li>K&#246;nigsberger, M., Pichler, B., Hellmich, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Micromechanics+of+ITZ-Aggregate+Interaaction+in+Concrete+Part+II:+Stength+Upscaling.">Micromechanics of ITZ-Aggregate Interaaction in Concrete Part II: Stength Upscaling.</a> Journal of the American Ceramic Society. 97 (2), 543-551 (2014).</li><li>Shahbazi, S., Rasoolan, I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Meso-scale+finite+element+modeling+of+non-homogeneous+three-phase+concrete.">Meso-scale finite element modeling of non-homogeneous three-phase concrete.</a> Case Studies in Construction Materials. 6, 29-42 (2017).</li><li>Ak&#231;ao&#287;lu, T., Tokyay, M., &#199;elik, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Assessing+the+ITZ+microcracking+via+scanning+electron+microscope+and+its+effect+on+the+failure+behavior+of+concrete.">Assessing the ITZ microcracking via scanning electron microscope and its effect on the failure behavior of concrete.</a> Cement and Concrete Research. 35 (2), 358-363 (2005).</li><li>Chang, H., Feng, P., Lyu, K., Liu, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+novel+method+for+assessing+C-S-H+chloride+adsorption+in+cement+pastes.">A novel method for assessing C-S-H chloride adsorption in cement pastes.</a> Construction &amp; Building Materials. 225, 324-331 (2019).</li><li>Wang, P., Jia, Y., Li, T., Hou, D., Zheng, Q. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Molecular+dynamics+study+on+ions+and+water+confined+in+the+nanometer+channel+of+Friedel's+salt:+structure+dynamics+and+interfacial+interaction.">Molecular dynamics study on ions and water confined in the nanometer channel of Friedel's salt: structure dynamics and interfacial interaction.</a> Physical Chemistry Chemical Physics. 20, 27049-27058 (2018).</li><li>Ma, H., Li, Z. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+Multi-Aggregate+Approach+For+Modeling+The+Interfacial+Transition+Zone+In+Concrete.">A Multi-Aggregate Approach For Modeling The Interfacial Transition Zone In Concrete.</a> ACI Materials Journal. 111 (2), (2014).</li><li>Yun, G., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Characterization+of+ITZ+in+ternary+blended+cementitious+composites:+Experiment+and+simulation.">Characterization of ITZ in ternary blended cementitious composites: Experiment and simulation.</a> Construction &amp; Building Materials. 41 (2), 742-750 (2013).</li><li>Garboczi, E. J., Bentz, D. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=In+Digital+simulation+of+the+aggregate-cement+paste+interfacial+zone+in+concrete.">In Digital simulation of the aggregate-cement paste interfacial zone in concrete.</a> International Conference on Electric Information and Control Engineering (ICEICE), 2011. , 196-201 (2011).</li><li>Winslow, D. N., Cohen, M. D., Bentz, D. P., Snyder, K. A., Garboczi, E. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Percolation+and+pore+structure+in+mortars+and+concrete.">Percolation and pore structure in mortars and concrete.</a> Cement &amp; Concrete Research. 24 (1), 25-37 (1994).</li><li>Sim&#245;es, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Mechanical Characterization of Fiber/Paste and Aggregate/Paste Interfaces (ITZ) in Reinforced Concrete with Fibers. , (2018).</li><li>Xiao, J., Li, W., Sun, Z., Lange, D. A., Shah, S. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Properties+of+interfacial+transition+zones+in+recycled+aggregate+concrete+tested+by+nanoindentation.">Properties of interfacial transition zones in recycled aggregate concrete tested by nanoindentation.</a> Cement and Concrete Composites. 37, 276-292 (2013).</li><li>Bentz, D. P., Garboczi, E. J., Stutzman, P. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Computer+Modelling+of+the+Interfacial+Transition+Zone+in+Concrete.">Computer Modelling of the Interfacial Transition Zone in Concrete.</a> Interfaces in Cementitious Composites. , 107-116 (1993).</li><li>Kai, L., Wei, S., Changwen, M., Honglei, C., Yue, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Quantitative+characterization+of+pore+morphology+in+hardened+cement+paste+via+SEM-BSE+image+analysis.">Quantitative characterization of pore morphology in hardened cement paste via SEM-BSE image analysis.</a> Construction &amp; Building Materials. 202, 589-602 (2019).</li><li>Ondracek, G., Underwood, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Quantitative+stereology.">Quantitative stereology.</a> Journal of Nuclear Materials. 42 (2), 237-237 (1972).</li><li>Xu, J., Wang, B., Zuo, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Modification+effects+of+nanosilica+on+the+interfacial+transition+zone+in+concrete:+A+multiscale+approach.">Modification effects of nanosilica on the interfacial transition zone in concrete: A multiscale approach.</a> Cement and Concrete Composite. 81, 1-10 (2017).</li><li>Zhu, Z., Chen, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Overestimation of ITZ thickness around regular polygon and ellipse aggregate. , 205-218 (2017).</li><li>Head, M. K., Wong, H. S., Buenfeld, N. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Characterising+aggregate+surface+geometry+in+thin-sections+of+mortar+and+concrete.">Characterising aggregate surface geometry in thin-sections of mortar and concrete.</a> Cement and Concrete Research. 38 (10), 1227-1231 (2008).</li><li>Gao, Y., De Schutter, G., Ye, G., Tan, Z., Wu, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+ITZ+microstructure,+thickness+and+porosity+in+blended+cementitious+composite:+Effects+of+curing+age,+water+to+binder+ratio+and+aggregate+content.">The ITZ microstructure, thickness and porosity in blended cementitious composite: Effects of curing age, water to binder ratio and aggregate content.</a> Composites Part B: Engineering. 60, 1-13 (2014).</li><li>Erdem, S., Dawson, A. R., Thom, N. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Influence+of+the+micro-+and+nanoscale+local+mechanical+properties+of+the+interfacial+transition+zone+on+impact+behavior+of+concrete+made+with+different+aggregates.">Influence of the micro- and nanoscale local mechanical properties of the interfacial transition zone on impact behavior of concrete made with different aggregates.</a> Cement and Concrete Research. 42 (2), 447-458 (2012).</li><li>Elsharief, A., Cohen, M. D., Olek, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Influence+of+aggregate+size,+water+cement+ratio+and+age+on+the+microstructure+of+the+interfacial+transition+zone.">Influence of aggregate size, water cement ratio and age on the microstructure of the interfacial transition zone.</a> Cement &amp; Concrete Research. 33 (11), 1837-1849 (2003).</li><li>Pan, T., Tutumluer, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Quantification+of+Coarse+Aggregate+Surface+Texture+Using+Image+Analysis.">Quantification of Coarse Aggregate Surface Texture Using Image Analysis.</a> Journal of Testing &amp; Evaluation. 35 (2), 177-186 (2006).</li><li>Erdogan, S. T., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Three-dimensional+shape+analysis+of+coarse+aggregates:+New+techniques+for+and+preliminary+results+on+several+different+coarse+aggregates+and+reference+rocks.">Three-dimensional shape analysis of coarse aggregates: New techniques for and preliminary results on several different coarse aggregates and reference rocks.</a> Cement &amp; Concrete Research. 36 (9), 1619-1627 (2006).</li><li>Santos, B. O., Valen&#231;a, J., Fowler, D. W., Saleh, H. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Livings+patterns+on+concrete+surfaces+with+biological+stains+using+hyperspectral+images+processing.">Livings patterns on concrete surfaces with biological stains using hyperspectral images processing.</a> Structural Control and Health Monitoring. , (2019).</li><li>Santos, B. O., Valen&#231;a, J., J&#250;lio, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=In+Classification+of+biological+colonization+on+concrete+surfaces+using+false+colour+HSV+images,+including+near-infrared+information.">In Classification of biological colonization on concrete surfaces using false colour HSV images, including near-infrared information.</a> Optical Sensing and Detection V, International Society for Optics and Photonics. , 106800 (2018).</li><li>Stock, S. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Recent+advances+in+X-ray+microtomography+applied+to+materials.">Recent advances in X-ray microtomography applied to materials.</a> International Materials Reviews. 53 (3), 129-181 (2013).</li><li>Lyu, K., Garboczi, E. J., She, W., Miao, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+effect+of+rough+vs.+smooth+aggregate+surfaces+on+the+characteristics+of+the+interfacial+transition+zone.">The effect of rough vs. smooth aggregate surfaces on the characteristics of the interfacial transition zone.</a> Cement and Concrete Composites. 99, 49-61 (2019).</li><li>Wong, H. S., Head, M. K., Buenfeld, N. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Pore+segmentation+of+cement-based+materials+from+backscattered+electron+images.">Pore segmentation of cement-based materials from backscattered electron images.</a> Cement &amp; Concrete Research. 36 (6), 1083-1090 (2006).</li><li>Liao, K. -. Y., Chang, P. -. K., Peng, Y. -. N., Yang, C. -. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+study+on+characteristics+of+interfacial+transition+zone+in+concrete.">A study on characteristics of interfacial transition zone in concrete.</a> Cement and Concrete Research. 34 (6), 977-989 (2004).</li><li>Barnes, B. D., Diamond, S., Dolch, W. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+contact+zone+between+portland+cement+paste+and+glass+&#8220;aggregate&#8221;+surfaces.">The contact zone between portland cement paste and glass &#8220;aggregate&#8221; surfaces.</a> Cement &amp; Concrete Research. 8 (2), 233-243 (1978).</li><li>Hamerly, G., Elkan, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Alternatives+to+the+k-means+algorithm+that+find+better+clusterings.">Alternatives to the k-means algorithm that find better clusterings.</a> Proceedings of the eleventh international conference on Information and knowledge management, ACM. , 600-607 (2002).</li><li>Celebi, M. E., Kingravi, H. A., Vela, P. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> A comparative study of efficient initialization methods for the k-means clustering algorithm. , 200-210 (2013).</li><li>Lu, Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Three-dimensional+mortars+using+real-shaped+sand+particles+and+uniform+thickness+interfacial+transition+zones:+Artifacts+seen+in+2D+slices.">Three-dimensional mortars using real-shaped sand particles and uniform thickness interfacial transition zones: Artifacts seen in 2D slices.</a> Cement and Concrete Research. , (2018).</li><li>Gao, Y., De Schutter, G., Ye, G., Huang, H., Tan, Z., Wu, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Porosity+characterization+of+ITZ+in+cementitious+composites:+Concentric+expansion+and+overflow+criterion.">Porosity characterization of ITZ in cementitious composites: Concentric expansion and overflow criterion.</a> Construction and Building Materials. 38, 1051-1057 (2013).</li><li>Celebi, M. E., Kingravi, H. A., Vela, P. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+comparative+study+of+efficient+initialization+methods+for+the+k-means+clustering+algorithm.">A comparative study of efficient initialization methods for the k-means clustering algorithm.</a> Expert Systems with Applications. 40 (1), 200-210 (2013).</li></ol>

The X-CT technique was applied to roughly determine the geometrical center of the ceramic particle to ensure that the analyzed surface is through the equator of the particle. Thus, the overestimation of the ITZ thickness caused by the 2D artifacts could be avoided38. Herein, the accuracy of obtained results is highly dependent on the flatness of the examined surfaces. Generally, a longer grinding and polishing time contributes to an adequately smooth surface for testing. However, due to the varyin...

At the mesoscopic scale, cement-based materials can be regarded as a three-phase composite comprised of the cement paste, the aggregate, and the interfacial transition zone (ITZ) between them1,2. The ITZ is often treated as a weak link since its increased porosity could act as channels for the ingress of aggressive species3,4 or provide easier pathways for crack growth5,6,7,8,9,10,11. Subsequently, it is of great interest to precisely characterize the properties of the ITZ to evaluate and predict the macro performance of the cement-based materials.
To investigate the ITZ, there has been excessive research on its microstructural features, forming mechanisms, and influencing factors12,13,14 using both experimental and numerical methods. Various techniques have been coupled for ITZ characterization including: mechanical tests, transport tests, mercury intrusion porosimetry (MIP) tests15,16 and nano-indentation17. It is widely accepted that the ITZ is mainly caused by the wall effect, as well as water film, micro-bleeding, one side growth, and gel syneresis18.
With the development of digital image processing method (DIP) in the last two decades19, the morphological characteristics of the ITZ (e.g., volume fraction, thickness, and porosity gradient) can be quantitatively determined. Based on examination of the plane sections using scanning electron microscopy (SEM) with a backscattered electron detector (BSE), the three dimensional (3D) features of ITZ can be derived from the 2D results via stereology theory20. Like the SEM-BSE technique, the nano-indentation technique is also based on the examination of polished surfaces, but it more focuses on the elastic modulus of the existing phases21. However, in both SEM-BSE analysis and the nano-indentation test, the ITZ thickness may be overestimated as the examined cross section rarely goes through the normal direction from an aggregate surface22. However, coupling this with fluorescent 3D confocal microscopy, the overestimation of ITZ could be eliminated and a real ITZ porosity and anhydrous cement content could be obtained23.
Previous studies of influencing factors mainly focused on the cement paste, ignoring the role of the aggregate and its surface texture24,25,26. Since the shape and morphological properties of the aggregate have been extensively described based on quantitative analysis of digital slices obtained from SEM or X-ray computed tomography (X-CT)27,28. However, no research focusing on the effect of the aggregate surface texture on the formation of ITZ region has been performed.
Hereby, we present a protocol to investigate the effect of aggregate surface morphology on the ITZ microstructure formation based on quantitative analysis of SEM-BSE images and a K-means clustering algorithm. A model concrete sample was prepared with spherical ceramic particle acting as the coarse aggregate. X-CT was used to roughly determine the relative location of the particle in the opaque cement matrix before halving the sample. After processing to obtained SEM-BSE images, the uneven distribution of ITZ around single aggregate was observed. Also, an index surface roughness (SR) describing the aggregate surface texture at the pixel level was defined. The K-means clustering algorithm, originally used in the area of signal processing and now widely used for image clustering29,30, was introduced to established a relationship between surface roughness (SR) and porosity gradient (SL).

<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>Auto Sputter Coater</td>
			<td>Cressington</td>
			<td>108 Auto/SE</td>
			<td></td>
		</tr>
		<tr>
			<td>Automatic polishing machine</td>
			<td>Buehler</td>
			<td>Phoenix4000</td>
			<td></td>
		</tr>
		<tr>
			<td>Brush</td>
			<td>Huoniu</td>
			<td>3#</td>
			<td></td>
		</tr>
		<tr>
			<td>Cement</td>
			<td>China United Cement Corporation</td>
			<td>P.I. 42.5</td>
			<td></td>
		</tr>
		<tr>
			<td>Cement paste mixer</td>
			<td>Wuxi Construction and Engineering</td>
			<td>NJ160</td>
			<td></td>
		</tr>
		<tr>
			<td>Ceramic particle</td>
			<td>Haoqiang</td>
			<td>&#934;15 mm</td>
			<td></td>
		</tr>
		<tr>
			<td>Cling film</td>
			<td>Miaojie</td>
			<td>65300</td>
			<td></td>
		</tr>
		<tr>
			<td>Cold mounting machine</td>
			<td>Buehler</td>
			<td>Cast N&#39; Vac 1000</td>
			<td></td>
		</tr>
		<tr>
			<td>Conductive tape</td>
			<td>Nissin Corporation</td>
			<td>7311</td>
			<td></td>
		</tr>
		<tr>
			<td>Cup</td>
			<td>Buehler</td>
			<td>20-8177-100</td>
			<td></td>
		</tr>
		<tr>
			<td>Cutting machine</td>
			<td>Buehler</td>
			<td>Isomet 4000</td>
			<td></td>
		</tr>
		<tr>
			<td>Cylindrical plastic mold</td>
			<td>Buehler</td>
			<td>20-8151-100</td>
			<td></td>
		</tr>
		<tr>
			<td>Diamond paste</td>
			<td>Buehler</td>
			<td>00060210, 00060190, 00060170</td>
			<td></td>
		</tr>
		<tr>
			<td>Diesel oil</td>
			<td>China Petroleum</td>
			<td>0#</td>
			<td></td>
		</tr>
		<tr>
			<td>Electronic balance</td>
			<td>Setra</td>
			<td>BL-4100F</td>
			<td></td>
		</tr>
		<tr>
			<td>Epoxy resin</td>
			<td>Buehler</td>
			<td>20-3453-128</td>
			<td></td>
		</tr>
		<tr>
			<td>Hardener</td>
			<td>Buehler</td>
			<td>20-3453-032</td>
			<td></td>
		</tr>
		<tr>
			<td>High precision cutting machine</td>
			<td>Buehler</td>
			<td>2215</td>
			<td></td>
		</tr>
		<tr>
			<td>Image J</td>
			<td>National Institutes of Health</td>
			<td>1.52o</td>
			<td></td>
		</tr>
		<tr>
			<td>Isopropyl alcohol</td>
			<td>Sinopharm</td>
			<td>M0130-241</td>
			<td></td>
		</tr>
		<tr>
			<td>Matlab</td>
			<td>MathWorks</td>
			<td>R2014a</td>
			<td></td>
		</tr>
		<tr>
			<td>Paper</td>
			<td>Deli</td>
			<td>A4</td>
			<td></td>
		</tr>
		<tr>
			<td>Plastic box</td>
			<td>Beichen</td>
			<td>3630</td>
			<td></td>
		</tr>
		<tr>
			<td>Plastic mold</td>
			<td>Youke</td>
			<td>a=b=c=25mm</td>
			<td></td>
		</tr>
		<tr>
			<td>Polished flannelette</td>
			<td>Buehler</td>
			<td>242150, 00242050, 00242100</td>
			<td></td>
		</tr>
		<tr>
			<td>Release agent</td>
			<td>Buehler</td>
			<td>20-8186-30</td>
			<td></td>
		</tr>
		<tr>
			<td>Scanning Electron Microscopy</td>
			<td>FEI</td>
			<td>Quanta 250</td>
			<td></td>
		</tr>
		<tr>
			<td>Scrape knife</td>
			<td>Jinzheng Building Materials</td>
			<td>CD-3</td>
			<td></td>
		</tr>
		<tr>
			<td>SiC paper</td>
			<td>Buehler</td>
			<td>P180, P320, P1200</td>
			<td></td>
		</tr>
		<tr>
			<td>Ultrasonic cleaner</td>
			<td>Zhixin</td>
			<td>DLJ</td>
			<td></td>
		</tr>
		<tr>
			<td>Vacuum box</td>
			<td>Heheng</td>
			<td>DZF-6020</td>
			<td></td>
		</tr>
		<tr>
			<td>Vacuum drying oven</td>
			<td>ZK</td>
			<td>ZK30</td>
			<td></td>
		</tr>
		<tr>
			<td>Vibrating table</td>
			<td>Jianyi</td>
			<td>GZ-75</td>
			<td></td>
		</tr>
		<tr>
			<td>Wooden stick</td>
			<td>Buehler</td>
			<td>20-8175</td>
			<td></td>
		</tr>
		<tr>
			<td>X-ray Computed Tomography</td>
			<td>YXLON</td>
			<td>Y.CT PRECISION S</td>
			<td></td>
		</tr>
	</tbody>
</table>

determination of aggregate surface morphology at the interfacial transition zone (itz)

Here, we present a comprehensive method to illustrate the uneven distribution of the interfacial transition zone (ITZ) around the aggregate and the effect of aggregate surface morphology on the formation of ITZ. First, a model concrete sample is prepared with a spherical ceramic particle in roughly the central part of the cement matrix, acting as a coarse aggregate used in common concrete/mortar. After curing until the designed age, the sample is scanned by X-ray computed tomography to determine the relative location of the ceramic particle inside the cement matrix. Three locations of the ITZ are chosen: above the aggregate, on the side of the aggregate, and below the aggregate. After a series of treatments, the samples are scanned with a SEM-BSE detector. The resultant images were further processed using a digital image processing method (DIP) to obtain quantitative characteristics of the ITZ. The surface morphology is characterized at the pixel level based on the digital image. Thereafter, K-means clustering method is used to illustrate the effect of surface roughness on ITZ formation.

The porosity distribution of ITZ regions above the aggregate, on the side of the aggregate, and below the aggregate are compared and shown in Figure 432. The porosity of the ITZ above the upper surface appears to be smaller than that on the side or above the aggregate, indicating a denser ITZ microstructure, while the ITZ below the aggregate is always the most porous due to micro-bleeding. Figure 432 shows that eve...

Watch this Scientific Journal Video about Determination of Aggregate Surface Morphology at the Interfacial Transition Zone ITZ at JoVE.com

Determination of Aggregate Surface Morphology at the Interfacial Transition Zone ITZ

Hereby, we proposed a protocol to illustrate the effect of aggregate surface morphology on the ITZ microstructure. The SEM-BSE image were quantitatively analyzed to obtain ITZ's porosity gradient via digital image processing and a K-means clustering algorithm was further employed to establish a relationship between porosity gradient and surface roughness.

Determination of Aggregate Surface Morphology at the Interfacial Transition Zone (ITZ)

Here, we present a comprehensive method to illustrate the uneven distribution of the interfacial transition zone (ITZ) around the aggregate and the effect ...

Research

Education

JoVE Core

JoVE Journal

Civil Engineering

Engineering

Unit 1

Aggregates and Water

SCIENTISTS IN ACTION

Experimental Measurement of Settling Velocity of Spherical Particles in Unconfined and Confined Surfactant-based Shear Thinning Viscoelastic Fluids

An experimental study is performed to measure the terminal settling velocities of spherical particles in surfactant based shear thinning viscoelastic ...

Laboratory Drop Towers for the Experimental Simulation of Dust-aggregate Collisions in the Early Solar System

For the purpose of investigating the evolution of dust aggregates in the early Solar System, we developed two vacuum drop towers in which fragile dust ...

Taking Advantage of Reduced Droplet-surface Interaction to Optimize Transport of Bioanalytes in Digital Microfluidics

Digital microfluidics (DMF), a technique for manipulation of droplets, is a promising alternative for the development of &#8220;lab-on-a-chip&#8221; ...

Ambient Method for the Production of an Ionically Gated Carbon Nanotube Common Cathode in Tandem Organic Solar Cells

A method of fabricating organic photovoltaic (OPV) tandems that requires no vacuum processing is presented. These devices are comprised of two ...

How to Ignite an Atmospheric Pressure Microwave Plasma Torch without Any Additional Igniters

This movie shows how an atmospheric pressure plasma torch can be ignited by microwave power with no additional igniters. After ignition of the plasma, a ...

Quantification of Hydrogen Concentrations in Surface and Interface Layers and Bulk Materials through Depth Profiling with Nuclear Reaction Analysis

Nuclear reaction analysis (NRA) via the resonant 1H(15N,&#945;&#947;)12C reaction is a highly effective method of depth profiling that quantitatively and ...

Emission Spectroscopic Boundary Layer Investigation during Ablative Material Testing in Plasmatron

Ablative Thermal Protection Systems (TPS) allowed the first humans to safely return to Earth from the moon and are still considered as the only solution ...

Preparation of Liquid-exfoliated Transition Metal Dichalcogenide Nanosheets with Controlled Size and Thickness: A State of the Art Protocol

We summarize recent advances in the production of liquid-exfoliated transition metal dichalcogenide (TMD) nanosheets with controlled size and thickness. ...

Orientational Transition in a Liquid Crystal Triggered by the Thermodynamic Growth of Interfacial Wetting Sheets

In liquid crystal (LC) physical chemistry, molecules near the surface play a great role in controlling bulk orientation. Thus far, mainly to achieve ...

Measuring the Densities of Aqueous Glasses at Cryogenic Temperatures

We demonstrate a method for determining the vitreous phase cryogenic temperature densities of aqueous mixtures, and other samples that require rapid ...