Name: coupling carbon capture from a power plant with semi-automated open raceway ponds for microalgae cultivation
Uploaded: 2020-08-14T16:30:00
Description: Watch this Scientific Journal Video about Coupling Carbon Capture from a Power Plant with Semi-automated Open Raceway Ponds for Microalgae Cultivation at JoVE.com

Dit werk werd ondersteund door het Regional Algal Feedstock Testbed-project, U.S. Department of Energy DE-EE0006269. We bedanken ook Esteban Jimenez, Jessica Peebles, Francisco Acedo, Jose Cisneros, RAFT Team, Mark Mansfield, UA-personeel van energiecentrales en personeel van TEP-energiecentrales voor al hun hulp.

1. Groeisysteem: outdoor open raceway vijver instellingen
<ol><li>Richt de open raceway-vijvers dicht bij de rookgasbron in (met 8-10% CO2). Zorg ervoor dat water en elektriciteit beschikbaar zijn op de locatie van de vijverreactor en dat de reactor het grootste deel van de dag niet in de schaduw staat (figuur 1).</li>
	<li>Vang rookgas af tijdens het naverbrandingsproces met behulp van een brandstofslang van 0,95 cm, enkele meters voordat het rookgas de schoorsteen binnenkomt o...

In deze studie tonen we aan dat het synergetisch koppelen van rookgaskoolstofafvang en microalgenteelt mogelijk is in een heet semi-aride klimaat. Het experimentele protocol voor het semi-geautomatiseerde raceway-vijversysteem integreert state-of-the-art technologie om relevante parameters in realtime te bewaken die correleren met algengroei bij het gebruik van rookgas als koolstofbron. Het voorgestelde protocol is bedoeld om de onzekerheid in de algenteelt te verminderen, wat een van de belangrijkste nadelen is van race...

De opwarming van de aarde is een van de belangrijkste milieuproblemen waarmee de wereld vandaag wordt geconfronteerd1. Studies suggereren dat de belangrijkste oorzaak de toename van de uitstoot van broeikasgassen (BKG), voornamelijk CO2, in de atmosfeer is als gevolg van menselijke activiteiten 2,3,4,5,6,7. In de VS is de grootste dichtheid van CO2-uitstoot voornamelijk afkomstig van de verbranding van fossiele brandstoffen in de energiesector, met name elektriciteitscentrales 3,7,8,9. Zo zijn technologieën voor koolstofafvang en -gebruik (CCU) naar voren gekomen als een van de belangrijkste strategieën om de uitstoot van broeikasgassen te verminderen 2,7,10. Deze omvatten biologische systemen die zonlicht gebruiken om CO2 en water via fotosynthese, in aanwezigheid van voedingsstoffen, om te zetten in biomassa. Het gebruik van microalgen is voorgesteld vanwege de snelle groeisnelheid, het hoge CO 2-fixatievermogen en de hoge productiecapaciteit. Bovendien hebben microalgen een breed bio-energiepotentieel omdat de biomassa kan worden omgezet in interessante producten, zoals biobrandstoffen die fossiele brandstoffen kunnen vervangen 7,9,10,11,12.
Microalgen kunnen groeien en biologische omzetting bereiken in een verscheidenheid aan teeltsystemen of reactoren, waaronder open raceway vijvers en gesloten fotobioreactoren 13,14,15,16,17,18,19. Onderzoekers hebben de voordelen en beperkingen bestudeerd die het succes van het bioproces in beide teeltsystemen bepalen, onder binnen- of buitenomstandigheden 5,6,16,20,21,22,23,24,25 . Open raceway vijvers zijn de meest voorkomende teeltsystemen voor koolstofafvang en -gebruik in situaties waar rookgas rechtstreeks vanuit de schoorsteen kan worden gedistribueerd. Dit type teeltsysteem is relatief goedkoop, is eenvoudig op te schalen, heeft lage energiekosten en heeft een lage energiebehoefte voor het mengen. Bovendien kunnen deze systemen eenvoudig naast de energiecentrale worden geplaatst om het CCU-proces efficiënter te maken. Er zijn echter enkele nadelen waarmee rekening moet worden gehouden, zoals de beperking van de overdracht van CO2-gas / vloeistofmassa. Hoewel er beperkingen zijn, zijn open raceway-vijvers voorgesteld als het meest geschikte systeem voor de productie van microalgenbiobrandstof in de buitenlucht 5,9,11,16,20.
In dit artikel beschrijven we een methode voor de teelt van microalgen in open raceway-vijvers die koolstofafvang uit het rookgas van een aardgascentrale combineert. De methode bestaat uit een semi-geautomatiseerd systeem dat de rookgasinjectie regelt op basis van de pH van de cultuur; het systeem bewaakt en registreert de Chlorella sorokiniana-cultuurstatus in realtime met behulp van optische dichtheid, opgeloste zuurstof (DO), elektrogeleiding (EC) en lucht- en vijvertemperatuursensoren. Algenbiomassa en rookgasinjectiegegevens worden elke 10 minuten verzameld door een datalogger in de Tucson Electric Power-faciliteit. Algenstamonderhoud, opschaling, kwaliteitscontrolemetingen en biomassakarakterisering (bijv. Correlatie tussen optische dichtheid, g / L en lipidegehalte) worden uitgevoerd in een laboratoriumomgeving aan de Universiteit van Arizona. Een eerder protocol schetste een methode voor het optimaliseren van rookgasinstellingen om de groei van microalgen in fotobioreactoren te bevorderen via computersimulatie26. Het hier gepresenteerde protocol is uniek omdat het gebruik maakt van open raceway-vijvers en is ontworpen om ter plaatse te worden geïmplementeerd in een aardgascentrale om direct gebruik te maken van het geproduceerde rookgas. Daarnaast maken real-time optische dichtheidsmetingen deel uit van het protocol. Het systeem zoals beschreven is geoptimaliseerd voor een heet semi-aride klimaat (Köppen BSh), dat lage neerslag, aanzienlijke variabiliteit in neerslag van jaar tot jaar, lage relatieve vochtigheid, hoge verdampingssnelheden, heldere luchten en intense zonnestraling vertoont27.

<table border="0" cellpadding="0" cellspacing="0" style="width:1767px;" width="1766">
	<colgroup>
		<col />
		<col />
		<col />
		<col />
	</colgroup>
	<tbody>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Adjustable speed motor (paddle wheel system)</td>
			<td style="width:204px;">Leeson</td>
			<td style="width:161px;">174307</td>
			<td style="width:1116px;">Lesson 174307.00, type: SCR Voltage; Amps:10</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Aluminum weight boats</td>
			<td style="width:204px;">Fisher Scientific</td>
			<td style="width:161px;">08-732-102</td>
			<td>Fisherbrand Aluminum Weighing Dishes</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Ammonium Iron (III) (NH&#8324;)&#8325;[Fe(C&#8326;H&#8324;O&#8327;)&#8322;]</td>
			<td>Fisher Scientific</td>
			<td>1185 - 57 - 5</td>
			<td>Medium preparation. Ammonium iron(III) citrate</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Ammonium Phosphate</td>
			<td style="width:204px;">Sigma-Aldrich</td>
			<td>7722-76-1</td>
			<td>This chemical is used for the optimized medium</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Ampicillin sodium salt</td>
			<td style="width:204px;">Sigma Aldrich</td>
			<td>A9518-5G</td>
			<td>This chemical is used for avoiding algae contamination</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Autoclave</td>
			<td>Amerex Instrument Inc</td>
			<td></td>
			<td>Hirayama HA300MII</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Bacto agar</td>
			<td style="width:204px;">Fisher Scientific</td>
			<td>BP1423500</td>
			<td>Fisher BioReagents Granulated Agar</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Bleach</td>
			<td style="width:204px;">Clorox</td>
			<td style="width:161px;"></td>
			<td>Germicidal Bleach, concentrated clorox</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Boric Acid (H3BO3)</td>
			<td style="width:204px;">Fisher Scientific</td>
			<td>10043-35-3</td>
			<td>Trace Elelements: Boric acid</td>
		</tr>
		<tr height="25">
			<td height="25" style="height:25px;width:285px;">Calcium chloride dihydrate (CaCl2*2H2O)</td>
			<td style="width:204px;">Sigma-Aldrich</td>
			<td>10035-04-8</td>
			<td>Medium preparation. Calcium chloride dihydrate</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:285px;">Carboys (20 L)</td>
			<td style="width:204px;">Nalgene - Thermo Fisher Scientific</td>
			<td>2250-0050PK</td>
			<td>Polypropylene Carboy w/Handles</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Centrifuge</td>
			<td style="width:204px;">Beckman Coulter, Inc</td>
			<td style="width:161px;"></td>
			<td>J2-21</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Chloroform</td>
			<td style="width:204px;">Sigma-Aldrich</td>
			<td>67-66-3</td>
			<td>This chemical is used for lipid extraction</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Citraplex 20% Iron</td>
			<td style="width:204px;">Loveland Products</td>
			<td>SDS No. 1000595582 -17-LPI</td>
			<td>https://www.fbn.com/direct/product/Citraplex-20-Iron#product_info</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:285px;">Cobalt (II) nitrate hexahydrate (Co(NO3)2*6H2O)</td>
			<td style="width:204px;">Sigma-Aldrich</td>
			<td style="width:161px;">10026-22-9</td>
			<td>Trace Elements: Cobalt (II) nitrate hexahydrate</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Compressor</td>
			<td style="width:204px;">Makita</td>
			<td>MAC700</td>
			<td>This equipment is used for the injection CO2 system</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Control Valve</td>
			<td style="width:204px;">Sierra Instruments</td>
			<td style="width:161px;">SmartTrak 100</td>
			<td>This item needs to be customized for your application. In our case, it was used a 5% CO2 and 95% air mixture.</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:285px;">Copper (II) Sulfate Pentahydrate (CuSO4*5H2O)</td>
			<td style="width:204px;">Sigma-Aldrich</td>
			<td style="width:161px;">7758-99-8</td>
			<td>Trace Elements: Copper (II) Sulfate Pentahydrate</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Data Logger: Campbell unit CR3000</td>
			<td style="width:204px;">Scientific Campbell</td>
			<td style="width:161px;">CR3000</td>
			<td>This equipment is used for controlling all the system, motoring and recording data</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Dissolvde Oxygen Solution</td>
			<td style="width:204px;">Campbell Scientific</td>
			<td style="width:161px;">14055</td>
			<td>Dissolved oxygen electrolyte solution DO6002 - Lot No. 211085</td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:285px;">Dissolved Oxygen probe</td>
			<td style="width:204px;">Sensorex</td>
			<td>&#65279;</td>
			<td>DO6400/T Dissolved Oxygen Sensor with Digital Communication</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;">Electroconductivity calibration solution</td>
			<td style="width:204px;">Ricca Chemical Company</td>
			<td style="width:161px;">2245 - 32 ( R2245000-1A )</td>
			<td>Conductivity Standard, 5000 uS/cm at 25C (2620 ppm TDS as NaCl)</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Electroconductivity probe sensor</td>
			<td style="width:204px;">Hanna Instruments</td>
			<td>HI3003/D</td>
			<td>Flow-thru Conductivity Probe - NTC Sensor, DIN Connector, 3m Cable</td>
		</tr>
		<tr height="63">
			<td height="63" style="height:63px;width:285px;">Ethylenediaminetetraacetic acid disodium salt dihydrate (Na2EDTA*2H2O)</td>
			<td style="width:204px;">Sigma-Aldrich</td>
			<td>6381-92-6</td>
			<td>Medium Preparation: Ethylenediaminetetraacetic acid disodium salt dihydrate</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Filters</td>
			<td style="width:204px;">Fisher Scientific</td>
			<td>09-874-48</td>
			<td>Whatman Binder-Free Glass Microfiber Filters</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Flasks</td>
			<td style="width:204px;">Fisher scientific</td>
			<td>09-552-40</td>
			<td>Pyrex Fernbach Flasks</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Furnace</td>
			<td style="width:204px;">Hogentogler</td>
			<td style="width:161px;">Model: F6020C-80</td>
			<td>Thermo Sicentific Thermolyne F6020C - 80 Muffle Furnace</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Glass dessicator</td>
			<td style="width:204px;">VWR International LLC</td>
			<td style="width:161px;">75871-430</td>
			<td>Type 150, 140 mm of diameter</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Glass funnel</td>
			<td style="width:204px;">Fisher Scientific</td>
			<td style="width:161px;">FB6005865</td>
			<td>Fisherbrand Reusable Glass Long-Stem Funnels</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Laminar flow hood</td>
			<td>Fisher Hamilton Safeair</td>
			<td></td>
			<td>Fisher Hamilton Stainless Safeair hume hood</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:285px;">Magnesium sulfate heptahydrate (MgSO4*7H2O)</td>
			<td>Fisher Scientific</td>
			<td>10034 - 99 - 8</td>
			<td>Medium Preparation: Magnesium sulfate heptahydrate</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Methanol</td>
			<td style="width:204px;">Sigma-Aldrich</td>
			<td>67-56-1</td>
			<td>Lipid extraction solvent</td>
		</tr>
		<tr height="28">
			<td height="28" style="height:28px;width:285px;">Micro bubble Diffuser</td>
			<td style="width:204px;">Pentair Aquatic Eco-Systems</td>
			<td>1PMBD075</td>
			<td>This equipment is used for the injection CO2 system</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Microalgae: Chlorella Sorokiniana</td>
			<td style="width:204px;">NAABB</td>
			<td style="width:161px;">DOE 1412</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Microoscope</td>
			<td></td>
			<td></td>
			<td>Carl Zeiss 4291097</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Microwave assistant extraction</td>
			<td style="width:204px;">MARS, CEM Corportation</td>
			<td style="width:161px;"></td>
			<td>CEM Mars 5 Xtraction 230/60 Microwave Accelerated Reaction System. Model: 907601</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">MnCl2*4H2O</td>
			<td style="width:204px;">Sigma-Aldrich</td>
			<td>13446-34-9</td>
			<td>Manganese(II) chloride tetrahydrate</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Mortars</td>
			<td style="width:204px;">Fisher Scientific</td>
			<td>FB961B</td>
			<td>Fisherbrand porcelein mortars</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Nitrogen evaporator</td>
			<td style="width:204px;">Organomation</td>
			<td style="width:161px;"></td>
			<td>N-EVAP 112 Nitrogen Evaporatpr (OA-SYS Heating System)</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Oven</td>
			<td style="width:204px;">VWR International LLC</td>
			<td style="width:161px;">89511-410</td>
			<td>Forced Air Oven</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Paddle Wheel</td>
			<td style="width:204px;"></td>
			<td style="width:161px;"></td>
			<td>8-blade horizontal axis propeller. This usually comes as part of the paddlewheel reactor.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Paddle wheel motor</td>
			<td>Leeson</td>
			<td>M1135042.00</td>
			<td>Leeson, Model: CM34025Nz10C; 1/4 HP; Volts 90; FR 34; 62 RPM.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Pestles</td>
			<td style="width:204px;">Fisher Scientific</td>
			<td>FB961M</td>
			<td>Fisherbrand porcelein pestles</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">pH and EC Transmitter</td>
			<td style="width:204px;">Hanna Instruments</td>
			<td>HI98143</td>
			<td>Hanna Instruments HI98143-04 pH and EC Transmitter with Galvanic isolated 0-4V.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">pH calibration solutions</td>
			<td style="width:204px;">Fisher Scientific</td>
			<td style="width:161px;">13-643-003</td>
			<td>Thermo Scientific Orion pH Buffer Bottles</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">pH probe sensor</td>
			<td style="width:204px;">Hanna Instruments</td>
			<td>HI1006-2005</td>
			<td>Hanna Instruments HI1006-2005 Teflon pH Electrode with matching pin 5m.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Pippete tips</td>
			<td>Fisher Scientific</td>
			<td>1111-2821</td>
			<td>1000 ul TipOne graduated blue tip in racks</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Pippetter</td>
			<td>Fisher Scientific</td>
			<td>13-690-032</td>
			<td>Eppendorf Reserch plus Variable Adjustable Volume Pipettes: Single-channel</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Plastic cuvettes</td>
			<td style="width:204px;">Fisher scientific</td>
			<td>14377017</td>
			<td>BrandTech BRAND Plastic Cuvettes</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Plates</td>
			<td style="width:204px;">Fisher scientific</td>
			<td style="width:161px;">08-757-100D</td>
			<td>Corning Falcon Bacteriological Petri Dishes with Lid</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Potash</td>
			<td></td>
			<td></td>
			<td>This chemical is used for the optimazed medium preparation. It was bought in a fertilizer local company</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Potassium phosphate dibasic (K2HPO4)</td>
			<td style="width:204px;">Sigma-Aldrich</td>
			<td>7758 -11 - 4</td>
			<td>Medium Preparation: Potassium phosphate dibasic</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Pyrex reusable Media Storage Bottles</td>
			<td style="width:204px;">Fisher scientific</td>
			<td>06-414-2A</td>
			<td>1 L and 2 L bottels - PYREX GL45 Screw Caps with Plug Seals</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Raceway Pond</td>
			<td></td>
			<td></td>
			<td>Similar equipment can be bought at https://microbioengineering.com/products</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Real Time Optical Density Sensor</td>
			<td>University of Arizona</td>
			<td></td>
			<td>This equipment was design and build by a member of the group</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">RS232 Cable</td>
			<td style="width:204px;">Sabrent</td>
			<td style="width:161px;"></td>
			<td>Sabrent USB 2.0 to Serial (9-Pin) DB-9 RS-232 Converter Cable, Prolific Chipset, Hexnuts, [Windows 10/8.1/8/7/VISTA/XP, Mac OS X 10.6 and Above] 2.5 Feet (CB-DB9P)</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Shaker Table</td>
			<td></td>
			<td></td>
			<td>Algae agitation 150 rpm</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Sodium Carbonate (Na2CO3)</td>
			<td style="width:204px;">Sigma-Aldrich</td>
			<td style="width:161px;">497-19-8</td>
			<td>Sodium carbonate</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:285px;">Sodium molybdate dihydrate (Na2MoO4*2H2O)</td>
			<td style="width:204px;">Sigma-Aldrich</td>
			<td style="width:161px;">10102-40-6</td>
			<td>Medium Preparation: Sodium molybdate dihydrate</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Sodium nitrate (NaNO3)</td>
			<td style="width:204px;">Sigma-Aldrich</td>
			<td>7631-99-4</td>
			<td>Medium Preparation: Sodium nitrate</td>
		</tr>
		<tr height="26">
			<td height="26" style="height:27px;width:285px;">Spectophotometer</td>
			<td style="width:204px;">Fisher Scientific Company</td>
			<td style="width:161px;">14-385-400</td>
			<td>Thermo Fisher Scientific - 10S UV-Vis GENESTYS Spectrophotometer cylindrical Longpath cell holder; internal reference dectector, Xenon flash lamp; dual silicon photodiode; 240V, 50 to 60Hz selected automatically.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Test tubes</td>
			<td style="width:204px;">Fisher Scientific</td>
			<td style="width:161px;">14-961-27</td>
			<td>Fisherbrand Disposable Borosilicate Glass Tubes with Plain End (10 ml)</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Thermocouples type K</td>
			<td style="width:204px;">Omega</td>
			<td>KMQXL-125G-6</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Urea</td>
			<td style="width:204px;">Sigma-Aldrich</td>
			<td style="width:161px;">2067-80-3</td>
			<td>Urea</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Vacuum filtration system</td>
			<td style="width:204px;">Fisher Scientific</td>
			<td style="width:161px;">XX1514700</td>
			<td>MilliporeSigma Glass Vacuum Filter Holder, 47 mm. The system includes: Ground glass flask attachment, coarse-frit glass filter support, and flask</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Vacuum pump</td>
			<td style="width:204px;">Grainger</td>
			<td style="width:161px;"></td>
			<td>Marathon Electric AC Motor Thermally protected G588DX - MOD 5KH36KNA510X. HP 1/4. RPM 1725/1425</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:285px;">Zinc sulfate heptahydrate (ZnSO4*7H2O)</td>
			<td style="width:204px;">Sigma-Aldrich</td>
			<td style="width:161px;">7446-20-0</td>
			<td>Zinc sulfate heptahydrate</td>
		</tr>
	</tbody>
</table>

coupling carbon capture from a power plant with semi-automated open raceway ponds for microalgae cultivation

In de Verenigde Staten is 35% van de totale uitstoot van koolstofdioxide (CO2) afkomstig van de elektriciteitsindustrie, waarvan 30% de opwekking van aardgaselektriciteit vertegenwoordigt. Microalgen kunnen CO2 10 tot 15 keer sneller biofixeren dan planten en algenbiomassa omzetten in interessante producten, zoals biobrandstoffen. Deze studie presenteert dus een protocol dat de potentiële synergieën van microalgenteelt aantoont met een aardgascentrale in het zuidwesten van de Verenigde Staten in een heet semi-aride klimaat. State-of-the-art technologieën worden gebruikt om de koolstofafvang en het gebruik via de groene algensoort Chlorella sorokiniana te verbeteren, die verder kan worden verwerkt tot biobrandstof. We beschrijven een protocol met betrekking tot een semi-geautomatiseerde open raceway-vijver en bespreken de resultaten van de prestaties toen het werd getest in de Tucson Electric Power-fabriek in Tucson, Arizona. Rookgas werd gebruikt als de belangrijkste koolstofbron om de pH te regelen en Chlorella sorokiniana werd gekweekt. Een geoptimaliseerd medium werd gebruikt om de algen te laten groeien. De hoeveelheid CO2 die in functie van de tijd aan het systeem werd toegevoegd, werd nauwlettend in de gaten gehouden. Daarnaast werden andere fysisch-chemische factoren die van invloed zijn op de algengroeisnelheid, biomassaproductiviteit en koolstoffixatie gecontroleerd, waaronder optische dichtheid, opgeloste zuurstof (DO), elektrogeleiding (EC) en lucht- en vijvertemperaturen. De resultaten geven aan dat een microalgenopbrengst tot 0,385 g/L asvrij drooggewicht haalbaar is, met een lipidengehalte van 24%. Het benutten van synergetische kansen tussen CO 2-uitstoters en algenboeren kan de middelen leveren die nodig zijn om de koolstofafvang te vergroten en tegelijkertijd de duurzame productie van algenbiobrandstoffen en bioproducten te ondersteunen.

Eerdere experimentele resultaten van ons laboratorium geven aan dat microalgenteelt met behulp van een semi-geautomatiseerde open raceway-vijver kan worden gekoppeld aan koolstofafvangprocessen. Om de synergie tussen deze twee processen beter te begrijpen (figuur 2), hebben we een protocol ontwikkeld en op maat gemaakt voor het kweken van de groene algensoort Chlorella sorokiniana onder buitenomstandigheden in een warm semi-aride klimaat. Aardgas rookgas werd verkregen uit een indus...

Watch this Scientific Journal Video about Coupling Carbon Capture from a Power Plant with Semi-automated Open Raceway Ponds for Microalgae Cultivation at JoVE.com

Coupling Carbon Capture from a Power Plant with Semi-automated Open Raceway Ponds for Microalgae Cultivation

Er wordt een protocol beschreven om de koolstofdioxide in het rookgas van aardgascentrales te gebruiken om microalgen te cultiveren in open raceway-vijvers. Rookgasinjectie wordt geregeld met een pH-sensor en de groei van microalgen wordt gemonitord met realtime metingen van de optische dichtheid.

Koppeling van koolstofafvang uit een energiecentrale met semi-geautomatiseerde open racewayvijvers voor de teelt van microalgen

In the United States, 35% of the total carbon dioxide (CO2) emissions come from the electrical power industry, of which 30% represent natural gas ...

This semi-automatic raceway cultivation system controlled by a pH sensor can directly capture flue gas from power plans for microalgae cultivation and can monitor microalgae growth with real-time measurements. The reactor system allows the direct capture and usage of carbon from industrial flue gas to grow microalgae in on-site semi-automated open pond raceway systems. The system can be used to cultivate alternative algae species and to capture carbon from any power plant.To set up an open raceway pond, attach a 0.95 centimeter fuel hose to capture the flue gas during the post-combustion process, a few meters before the flue gas enters the stack to be discharged into the atmosphere. Place a 20 liter water trap and an approximately 12 meter condenser between the stack and the compressor to remove water from the flue gas. To monitor algal growth, connect a real-time optical density sensor that measures the absorbance at 650 and 750 nanometers, a dissolved oxygen sensor, air and pond thermocouples, a pH sensor, and an electroconductivity sensor to a data logger.To set up a pH control system, connect a compressor and control valve system to the data logger program to manage the flue gas injection and use a tube to direct the flue gas from the control valve through a stone diffuser to the bottom of the raceway pond, then set the system to inject flue gas when the pH value was greater than 8.05 and to stop the flue gas injection when the pH is less than eight. To set up an algal culture system, set the culture room to 25 degrees Celsius in a 12-hour light, 12-hour dark cycle, and use deionized water salts and macro and micronutrients to prepare BG-11 culture medium. Use a sterile loop to select a single algal colony from the culture plate and inoculate the algae in a 50 milliliter tube containing sterile growth medium in a clean biosafety cabinet.Grow the small liquid culture on a shaker table at 120 revolutions per minute for one week. At the end of the incubation, transfer the entire volume of algal culture into 500 milliliters of liquid culture in a one liter flask and close the flask with a rubber stopper fitted with stainless steel tubing to provide aeration. Filter the air with 0.20 micron air sterilization filters and allow the culture to grow for another one to two weeks using a spectrophotometer to monitor the cell density daily.At the end of the culture period, add 500 milliliters of the liquid algal culture to eight liters of non-sterile culture medium in a 10 liter carboy and inject a mixture of 5%carbon dioxide and 95%air into the carboy. Monitor the stock plate and liquid cultures under a light microscope at the 10 and 40X magnifications once a week to ensure growth of the strain of interest. To inoculate an outdoor open raceway pond with algae, first, thoroughly clean the reactor overnight with 30%bleach.Rinse the reactor the next morning until all of the bleach has been removed and calibrate all of the sensors according to their corresponding calibration procedures. Fill the raceway pond up to 80%with water to dilute the concentrated medium and inoculate the pond with the 10 liter carboy of algae culture. Bring the pond to its final volume, then partially shade the raceway pond with wooden pallets for about three days as an adaptation strategy to avoid photo inhibition to allow the microalgae to acclimate to the culture system.To perform a batch growth experiment, inspect and record any day-to-day variations including water evaporation, paddle wheel motor and sensor functionality, or anything else out of the ordinary. Drain and inspect the compressor and water trap daily to allow the removal of any excess water and to minimize flue gas corrosion. Configure the data logger to scan each sensor measurement every 10 seconds and to store the average sensor and air and reactor temperature data every 10 minutes.Make sure that the water level remains constant at the reactor's final volume to avoid affecting the optical density measurement. After replenishing the water in the reactor, collect an algal biomass sample using a 250 milliliter bottle. Measure the optical density in the spectrophotometer.Check the quality of the algae culture three times a week by light microscopy. When a culture is close to reaching stationary phase, harvest 75%of the total algae culture volume and use two to five liters of the culture suspension to perform biomass productivity analysis in the laboratory, then process and convert the rest of the algae into the desired algal products. Here, a comparison between the sensor and laboratory measurements can be observed.Both breeding show similar trends with the data increasing as a function of time. Optical density values increase during the day, but decrease at night during respiration, indicating a change in biomass productivity, thus the integration of a real-time optical density sensor makes it possible to make effective management decisions about the overall algal production system. In this analysis, flue gas was injected from approximately 8:00 a.m.to 6:00 p.m. but was not injected between 6:00 p.m. and 8:00 a.m.This day/night cycle reflects the daylight sunlight exposure and the lack of light during the night, and consequently, the activation of photosynthesis or photorespiration respectively. As illustrated in this figure, as the algal grow rate increases, more flue gas is required, confirming that the on/off flue gas pulse injection system is effective at facilitating carbon capture and utilization through microalgae cultivation. Other physical chemical parameters can also be used to establish a correlation between the parameters and algal growth and productivity.It is important to make sure that the pH system is properly set up and that all of the sensors are calibrated before inoculating the raceway ponds with microalgae. Other methods that can be performed with the raceway pond while producing microalgae biomass include lipid, carbohydrate, or pigment extraction, ash-free dry weight measurements, and PCR quality monitoring.

Research

JoVE Journal

Environment

Methods for Performing Crosses in Setaria viridis, a New Model System for the Grasses

Methods for Performing Crosses in Setaria viridis, a New Model System for the Grasses

Methoden voor het uitvoeren van Kruisen in<em&gt; Setaria viridis</em&gt;, Een Nieuw Model Systeem voor de Grassen

Setaria viridis is an emerging model system for C4 grasses. It is closely related to the bioenergy feed stock switchgrass and the grain crop foxtail ...

Analysis of Fatty Acid Content and Composition in Microalgae

Analyse van vetzuurgehalte en Compositie in Microalgen

A method to determine the content and composition of total fatty acids present in microalgae is described. Fatty acids are a major constituent of ...

Single-plant, Sterile Microcosms for Nodulation and Growth of the Legume Plant Medicago truncatula with the Rhizobial Symbiont Sinorhizobium meliloti

Single-plant, Sterile Microcosms for Nodulation and Growth of the Legume Plant Medicago truncatula with the Rhizobial Symbiont Sinorhizobium meliloti

Single-plant, Steriel Microcosmi voor nodulatie en groei van de peulvrucht installatie<em&gt; Medicago truncatula</em&gt; Met de stikstofbindende Symbiont<em&gt; Sinorhizobium meliloti</em

Rhizobial  bacteria form symbiotic, nitrogen-fixing nodules on the roots of compatible host  legume plants.  One  of the most well-developed model systems ...

Experimental Protocol for Manipulating Plant-induced Soil Heterogeneity

Experimenteel protocol voor het manipuleren van Plant-geïnduceerde bodemheterogeniteit

Coexistence theory has often treated environmental heterogeneity as being independent of the community composition; however biotic feedbacks such as ...

Modification and Application of a Leaf Blower-vac for Field Sampling of Arthropods

Wijziging en toepassing van een bladblazer-vac voor Field Sampling geleedpotigen

Rice fields host a large diversity of arthropods, but investigating their population dynamics and interactions is challenging. Here we describe the ...

Measurement of the Rheology of Crude Oil in Equilibrium with CO2 at Reservoir Conditions

Measurement of the Rheology of Crude Oil in Equilibrium with CO2 at Reservoir Conditions

Meting van de reologie van ruwe olie in evenwicht met CO<sub&gt; 2</sub&gt; Bij reservoir voorwaarden

A rheometer system to measure the rheology of crude oil in equilibrium with carbon dioxide (CO2) at high temperatures and pressures is described. The ...

Continuous Hydrologic and Water Quality Monitoring of Vernal Ponds

Continu hydrologische en Water kwaliteitsbewaking van Vernal vijvers

Vernal ponds, also referred to as vernal pools, provide critical ecosystem services and habitat for a variety of threatened and endangered species. ...

The Plant Infection Test: Spray and Wound-Mediated Inoculation with the Plant Pathogen Magnaporthe Grisea

The Plant Infection Test: Spray and Wound-Mediated Inoculation with the Plant Pathogen Magnaporthe Grisea

De Plant infectie Test: Spray en wond-gemedieerde inoculatie met de Plant Pathogen Magnaporthe Grisea

Plants possess a powerful system to defend themselves against potential threats by pathogenic fungi. For agriculturally important plants, however, current ...

Cultivation of Green Microalgae in Bubble Column Photobioreactors and an Assay for Neutral Lipids

Teelt van groene microalgen in Bubble kolom Photobioreactors en een kwantitatieve analyse voor neutrale lipiden

There is significant interest in the study of microalgae for engineering applications such as the production of biofuels, high value products, and for the ...

High-throughput Siderophore Screening from Environmental Samples: Plant Tissues, Bulk Soils, and Rhizosphere Soils

Siderofoor High-throughput Screening van milieu monsters: plantaardige weefsels, Bulk bodems en rhizosfeer bodems

Siderophores (low-molecular weight metal chelating compounds) are important in various ecological phenomenon ranging from iron (Fe) biogeochemical cycling ...