Progettazione e sviluppo di un adattatore di allineamento della maschera per microscopio stampato tridimensionalmente per la fabbricazione di dispositivi microfluidici multistrato
Designing the Microscope Mask Alignment Adapter (MMAA)
1:29
Creation of Bilayer Master Mold Using the MMAA (photolithography) and Determination of the Alignment Error
4:40
Results: Design, Customization, and Characterization of the Master Molds Fabricated Using MMAA
5:44
Conclusion
Transcript
Questo protocollo è significativo in quanto consente la generazione di una piattaforma economica e facile da usare che aiuta nella produzione di precisi stampi master microfluidici multistrato. Il vantaggio principale della tecnica è che richiede
Sign in or start your free trial to access this content
Questo progetto consente ai piccoli laboratori di sviluppare una piattaforma di facile utilizzo per la fabbricazione di precisi dispositivi microfluidici multistrato. La piattaforma è costituita da un adattatore di allineamento della maschera per microscopio stampato tridimensionalmente utilizzando il quale sono stati realizzati dispositivi microfluidici multistrato con errori di allineamento di < 10 μm.