January 25th, 2021
•This project allows small laboratories to develop an easy-to-use platform for the fabrication of precise multilayer microfluidic devices. The platform consists of a three-dimensionally printed microscope mask alignment adapter using which multilayer microfluidic devices with alignment errors of <10 µm were achieved.
Related Videos
Design, Fabrication, and Experimental Characterization of Plasmonic Photoconductive Terahertz Emitters
Fabrication and Testing of Microfluidic Optomechanical Oscillators
In Situ Time-dependent Dielectric Breakdown in the Transmission Electron Microscope: A Possibility to Understand the Failure Mechanism in Microelectronic Devices
Thermal Measurement Techniques in Analytical Microfluidic Devices
Fabrication and Operation of Acoustofluidic Devices Supporting Bulk Acoustic Standing Waves for Sheathless Focusing of Particles
Fabrication of Fully Solution Processed Inorganic Nanocrystal Photovoltaic Devices
Solvent Bonding for Fabrication of PMMA and COP Microfluidic Devices
Flow-assisted Dielectrophoresis: A Low Cost Method for the Fabrication of High Performance Solution-processable Nanowire Devices
Design and Fabrication of an Optical Fiber Made of Water
Fabrication of Refractive-index-matched Devices for Biomedical Microfluidics
ABOUT JoVE
Copyright © 2024 MyJoVE Corporation. All rights reserved