Vores protokol giver vigtige trin, der sikrer datakvalitet, især kvaliteten af hver data, hvilket er nøglen til succes for en samtidig EEG-fMRI-undersøgelse, men understreges sjældent. Denne protokol er ligetil og bruger kun let tilgængelige medicinske produkter, derfor er det meget let at følge. Denne protokol fører til bedre kvalitet og læsbarhed af EEG erhvervet samtidig med fMRI, hvilket er særligt nyttigt til at identificere subtile EEG-ændringer i epilepsiundersøgelser.
Denne protokol er også nyttig til at identificere subtile EEG-hændelser i enkeltforsøgs ERP'er af neurokognitive undersøgelser. Til at begynde med skal du slutte de MRI-kompatible EEG- og bipolarforstærkere til de fuldt opladede batteripakker og til optagecomputeren. Kontroller, at arbejdsområdet for optagelsessoftwaren er konfigureret korrekt.
Lad en 10 milliliter sprøjte med slibende ledende gel til påføring af EEG-hætten. Mål emnets hovedomkreds ved at pakke et fleksibelt, ikke-strækbart målebånd rundt om hovedet over de super orbitale højderygge i occiput. Vælg en passende størrelse hætte, der er en centimeter større end hovedet omkreds, og sørg for, at det er behageligt for emnet.
Efter at have placeret hætten på den omtrentlige position over motivets hoved, måle længder af inion-nasion bue, og markere skæringspunktet mellem inion-nasion bue og vinkelret bue. Skub hætten over hovedet, så placeringen af elektrode CZ er justeret til dette kryds. Sørg for, at hætten ikke roteres vandret ved manuelt at kontrollere vejrelektroder FZ, PZ, OZ, reference og jord er placeret over inion-nasion bue.
Udsæt huden under hver elektrode ved at fortrænge håret til siden ved hjælp af bagsiden af en vatpind. Gnid huden under hver elektrode ved hurtigt at dreje en vatpind, der indeholder 70% alkoholopløsning placeret gennem åbningen af elektroden. Påfør en lille mængde slibende ledende gel i åbningen, og slid huden ved hurtigt at dreje en vatpind.
Overvåg elektrodens impedans, og gentag sliddet, indtil impedansen falder til mindst under 20 kiloohms. Når impedansen er tilfredsstillende, skal du fylde åbningen med den samme gel, og sørg for ikke at anvende overdreven gel i åbningen for at undgå at bygge bro mellem elektroder. Før du placerer EKG-elektroden bagpå, skal du bede motivet om at sidde oprejst uden at bøje halsen.
Placer EKG-elektroden to til tre centimeter tilbage fra median furen, og sørg for, at ledningen er lige bagpå, men med godtgørelse langs nakkens kurve for at undgå forskydning, når motivet lægger sig på MRI-bordet. Gnid huden under EKG-elektroden med en alkoholpind. Fastgør EKG-elektroden til huden ved hjælp af en dobbeltsidet klæbering, og overvåg impedansen ved at gentage slid på huden med en vatpind.
Fold den tørre alkohol bomuld vatpind i fire og læg den på EKG elektroden, derefter tape vatpinden til huden ved hjælp af en kirurgisk tape. Tape EKG elektrodetråden til huden op til skulderen. Placer et sæt forfletning af kulstoftråde bestående af seks sløjfer over hætten, så ledningerne er parallelt med bundtet af elektroder på toppen af hovedet.
Brug kirurgisk tape til at sikre sløjferne omkring elektroderne, så sløjferne dækker hovedet med hver løkke, der dækker næsten et lige område. Wrap motivets hoved med en elastisk bandage over EEG hætten og kulstof sløjfer, og sørg for, at bandagen dækker alle elektroder og er ikke for stram. Spørg, om motivet føler sig utilpas pres på hovedet, mens du anvender bandagen.
For hvile statslige erhvervelse, instruere emnet til at anvende MR-kompatible ørepropper. Brug et headset eller øretelefoner til opgavebaseret anskaffelse, og sørg for, at motivet kan høre gennem begge sider af headsettet eller øretelefonerne. Placer en MR-kompatibel flad hukommelse skum pude i den nederste halvdel af hovedet spolen, før du beder emnet til at ligge ned og placere hovedet i spolen.
Placer derefter elektroden og carbon wire bundterne lige gennem den øverste åbning af hovedspolen. Tilføj hukommelse skum puder til toppen af hovedet, panden, og tidsmæssige område, fylde alle rum tilbage i hovedet spolen, mens der ikke komprimere motivets hoved for stramt. Placer den øverste halvdel af hovedspolen og luk spolen, og sørg for, at puderne ikke klemmer hovedet.
Placer en halvcylindret hukommelsesskumpude bag i nakken, så EKG-elektrodetråden er klemt godt mellem puden og nakken. Når du har placeret alle hukommelsesskumpuder, skal du teste, at motivet stadig kan høre gennem begge sider af headsets eller øretelefoner. Placer spejlet og instruere emnet til at justere spejlet, når motivets hoved er på isocentret af MR-boret.
Når EEG- og EKG-elektroderne er forbundet med EEG-forstærkeren, og kulstoftrådssløjferne er sløjfer til den bipolære forstærker, der er placeret bag på MRI-boringen, skal forstærkerne tilsluttes optagecomputeren ved hjælp af optiske fibre. Tænd derefter for forstærkerne, og kontroller, at alle elektroders impedans stadig er lav. Arranger alle ledninger mellem udgangen af den øverste åbning af hovedspolen og forstærkerne, så de er placeret lige og i midten af MRI-boringen.
Placer en carbon wire loop omkring båndkablet, der går fra EEG- og EKG-elektrodestikkassen til forstærkeren. Immobilisere ledningerne ved at klemt dem alle med MR-sikre og ikke-ferromagnetiske sandsække mellem udløbet af den øverste åbning af hovedspolen og forstærkerne. Placer sandsække på forstærkerne og placere forstærkerne uden for boringen af magneten ved hjælp af kabler leveret af producenten.
Kommuniker med emnet fra konsolrummet for at bekræfte, at motivet kan høre operatøren og instruere forsøgspersonen om ikke at bevæge sig under dataindsamlingen. Start EEG-optagelsen, før du starter fMRI-anskaffelse. Kontroller, om mærker fra scanneren og lydstyrkeudløseren vises med jævne mellemrum i online-EEG-optagelsen.
Repræsentative EEG-signaler fra forsøgspersoner, der deltog i neurokognitive undersøgelse og epilepsi undersøgelse ved hjælp af denne protokol er vist her. De EEG-signaler, der blev opnået fra begge undersøgelser, var ens før behandlingen. De resulterende EEG-signaler fra begge undersøgelser var af analyserelig kvalitet uden synlig forurening af EKG-artefakter, som det ses her.
Epileptiske aktiviteter blev tydeligt set på EEG under epilepsiundersøgelsen. På EEG erhvervet under neurokognitive undersøgelse, blinkende, øjenbevægelser, og muskel artefakter blev set, især i frontal fører FP1 og FP2 efter artefakt fjernelse. Ingen artefakt stammer fra maskiner vibrationer blev set på post-forarbejdede EEG signaler erhvervet i begge undersøgelser.
Desuden forårsagede EEG-elektroderne ikke synlige artefakter på de MR-billeder, der blev erhvervet samtidigt. Når du forsøger denne protokol, immobilisere hovedet af emnet, ledningerne, og kablerne til tilstrækkeligt mindske mekaniske vibrationer. Denne protokol bruges i øjeblikket til vores neurovidenskabsprojekt, der kræver ERP-registrering af enkeltforsøg.
Det baner vejen for at bruge samtidig EEG-MR-scanning i ikke-invasiv hjerne computer interface forskning.