Vår protokoll gir viktige trinn som sikrer datakvalitet, spesielt kvaliteten på hver data, noe som er nøkkelen til suksessen til en samtidig EEG-fMRI-studie, men blir sjelden vektlagt. Denne protokollen er grei og bruker bare lett tilgjengelige medisinske produkter, derfor er den veldig enkel å følge. Denne protokollen fører til bedre kvalitet og lesbarhet av EEG oppnådd samtidig med fMRI, noe som er spesielt nyttig for å identifisere subtile EEG-endringer i epilepsistudier.
Denne protokollen er også nyttig for å identifisere subtile EEG-hendelser i erper for enkeltforsøk av nevrokognitive studier. Til å begynne med kobler du MR-kompatible EEG- og bipolarforsterkere til de fulladede batteripakkene og til innspillingsdatamaskinen. Kontroller at arbeidsområdet til innspillingsprogramvaren er riktig konfigurert.
Legg en 10 milliliter sprøyte med slipende ledende gel for påføring av EEG-hetten. Mål motivets hodeomkrets ved å pakke inn et fleksibelt, ikke-strekkbart målebånd rundt hodet, over superbaneryggene i nakkestøtten. Velg en hette med riktig størrelse som er én centimeter større enn hodeomkretsen, og kontroller at den er behagelig for motivet.
Etter å ha plassert hetten i omtrentlig posisjon over motivets hode, mål lengdene på inion-nasionbuen, og merk skjæringspunktet mellom inion-nasionbuen og den vinkelrette buen. Skyv hetten over hodet slik at elektrodens posisjon CZ justeres til dette skjæringspunktet. Påse at hetten ikke roteres horisontalt ved å kontrollere værelektrodene FZ, PZ, OZ, referansen og bakken manuelt er plassert over inion-nasion-buen.
Utsett huden under hver elektrode ved å fortrenge håret til siden ved hjelp av baksiden av en bomullspinne. Gni huden under hver elektrode ved raskt å spinne en bomullspinne som inneholder 70% alkoholoppløsning plassert gjennom åpningen av elektroden. Påfør en liten mengde av den slipende ledende gelen i åpningen, og slip huden ved å raskt spinne en bomullspinne.
Overvåk elektrodens impedans, og gjenta slitasjen til impedansen faller til minst under 20 kiloohms. Når impedansen er tilfredsstillende, fyll åpningen med samme gel, sørg for ikke å bruke overdreven gel i åpningen for å unngå bro mellom elektroder. Før du plasserer EKG-elektroden bak, må du be motivet om å sitte oppreist uten å bøye nakken.
Plasser EKG-elektroden to til tre centimeter igjen fra median furen, og sørg for at ledningen er rett på baksiden, men med godtgjørelse langs nakkekurven for å unngå forskyvning når motivet legger seg på MR-bordet. Gni huden under EKG-elektroden med en alkoholpinne. Fest EKG-elektroden til huden ved hjelp av en dobbeltsidig limring, og overvåk impedansen ved å gjenta slitasjen på huden med en bomullspinne.
Brett den tørre bomullspinnen i fire og legg den på EKG-elektroden, og tape deretter vattpinnen til huden ved hjelp av et kirurgisk tape. Tape EKG-elektrodeledningen til huden opp til skulderen. Plasser et sett med ferdigflettede karbonledninger som består av seks løkker over hetten, slik at ledningene er parallelt med elektrodenes bunt på toppen av hodet.
Bruk kirurgisk tape for å feste løkkene rundt elektrodene slik at løkkene dekker hodet med hver sløyfe som dekker nesten et likt område. Vikle motivets hode med en elastisk bandasje over EEG-hetten og karbonløkkene, sørg for at bandasjen dekker alle elektrodene og ikke er for stram. Spør om motivet føler ubehagelig press på hodet mens du bruker bandasjen.
For oppkjøp av hviletilstand, be emnet om å bruke MR-kompatible ørepropper. Bruk hodetelefoner eller øretelefoner til oppgavebasert anskaffelse, og sørg for at motivet kan høre gjennom begge sider av hodesettet eller øretelefonene. Legg en MR-kompatibel flat minneskumpute i den nedre halvdelen av hodespolen før du ber motivet legge seg ned og plassere hodet i spolen.
Plasser deretter elektroden og karbontrådbuntene rett gjennom toppåpningen på hodespolen. Legg til minneskumputer på toppen av hodet, pannen og temporalområdet, fyll opp alle mellomrom som er igjen i hodespolen, mens du ikke komprimerer motivets hode for tett. Plasser den øvre halvdelen av hodespolen og lukk spolen, sørg for at putene ikke klemmer hodet.
Plasser en halvsylindret form memory foam pute på baksiden av nakken slik at EKG-elektrodetråden er smøret godt mellom puten og nakken. Etter å ha plassert alle minneskumputene, må du teste at motivet fortsatt kan høre gjennom begge sider av hodesettene eller øretelefonene. Plasser speilet og be motivet om å justere speilet når motivets hode er ved isosenteret til MR-boringen.
Etter å ha koblet EEG- og EKG-elektrodene til EEG-forsterkeren, og karbontrådløkkene til den bipolare forsterkeren plassert på baksiden av MR-boringen, kobler du forsterkerne til opptaksdatamaskinen ved hjelp av optiske fibre. Slå deretter på forsterkerne og kontroller at impedansen til alle elektroder fortsatt er lav. Ordne alle ledninger mellom utløpet av toppåpningen på hodespolen og forsterkerne slik at de plasseres rett og i midten av MR-boringen.
Plasser en karbontrådsløyfe rundt båndkabelen, og gå fra EEG- og EKG-elektrodkontaktboksen til forsterkeren. Immobiliser ledningene ved å smøre dem alle med MR-trygge og ikke-ferromagnetiske sandsekker mellom utløpet av toppåpningen av hodespolen og forsterkerne. Plasser sandsekker på forsterkere og plasser forsterkerne utenfor magnetens boring ved hjelp av kabler levert av produsenten.
Kommuniser med motivet fra konsollrommet for å bekrefte at motivet kan høre operatøren og instruere motivet om ikke å bevege seg under datainnsamlingen. Start EEG-opptaket før du starter fMRI-anskaffelsen. Kontroller om markører fra skanneren og volumutløseren regelmessig vises i den elektroniske EEG-opptaket.
Representative EEG-signaler hentet fra personer som deltok i nevrokognitiv studie og epilepsistudie ved hjelp av denne protokollen, vises her. EEG-signalene fra begge studiene var like før behandling. De resulterende EEG-signalene fra begge studiene var av analyserbar kvalitet uten synlig forurensning av EKG-artefakter, som vist her.
Epileptiske aktiviteter ble tydelig sett på EEG under epilepsistudien. På EEG oppnådd under nevrokognitiv studie, blinkende, øyebevegelse, og muskelartefakter ble sett, spesielt i frontal fører FP1 og FP2 etter fjerning av artefakter. Ingen artefakter som stammer fra maskinvibrasjoner ble sett på etterbehandlede EEG-signaler innhentet i begge studiene.
EEG-elektrodene forårsaket heller ikke synlige artefakter på MR-bildene som ble anskaffet samtidig. Når du prøver denne protokollen, immobiliserer du motivets hode, ledningene og kablene for å redusere mekaniske vibrasjoner tilstrekkelig. Denne protokollen brukes for tiden til vårt nevrovitenskapelige prosjekt som krever ERP enkeltprøvedeteksjon.
Det baner vei for å bruke samtidig EEG-MR i ikke-invasiv hjernedatagrensesnittforskning.