Name: computer numerical control micromilling of a microfluidic acrylic device with a staggered restriction for magnetic nanoparticle-based immunoassays
Uploaded: 2022-06-23T13:10:00
Description: Watch this Scientific Journal Video about Computer Numerical Control Micromilling of a Microfluidic Acrylic Device with a Staggered Restriction for Magnetic Nanoparticle-Based Immunoassays at JoVE.com

This work was supported by Conacyt, Mexico under grant 312231 of the &#34;Programa de Apoyos para Actividades Cient&#237;ficas, Tecnol&#243;gicas y de Innovaci&#243;n&#34;, and by AMEXCID and Mexican Foreign Relations Ministry (SRE) under grant &#34;Prueba serol&#243;gica r&#225;pida, barata y de alta sensibilidad para SARS-CoV-2&#34;. JAHO thanks Conacyt Mexico for their PhD scholarship.

1. Micromilling
<ol>
	<li>Surface grinding
	<ol>
		<li>Turn on the micromilling machine and the piezoelectric controller. Start their respective control software12.</li>
		<li>Select the required end mill bits (200 &#181;m and 800 &#181;m diameters). Place them in the appropriate compartment of the milling machine (Figure 1).</li>
		<li>Cut 9 mm x 25 mm rectangles of 1.3 mm thick PMMA with the 800 &#181;m end mill bit. Attach one of these rectangles...

<ol>
	<li>Ng, A. H. C., Uddayasankar, U., Wheeler, A. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Immunoassays+in+microfluidic+systems.">Immunoassays in microfluidic systems.</a> Analytical and Bioanalytical Chemistry. 397 (3), 991-1007 (2010).</li><li>Berlanda, S. F., Breitfeld, M., Dietsche, C. L., Dittrich, P. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Recent+advances+in+microfluidic+technology+for+bioanalysis+and+diagnostics.">Recent advances in microfluidic technology for bioanalysis and diagnostics.</a> Analytical Chemistry. 93 (1), 311-331 (2021).</li><li>Teste, B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microchip+integrating+magnetic+nanoparticles+for+allergy+diagnosis.">Microchip integrating magnetic nanoparticles for allergy diagnosis.</a> Lab on a Chip. 11 (24), 4207-4213 (2011).</li><li>Guevara-Pantoja, P. E., S&#225;nchez-Dom&#237;nguez, M., Caballero-Robledo, G. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Micro-nanoparticles+magnetic+trap:+Toward+high+sensitivity+and+rapid+microfluidic+continuous+flow+enzyme+immunoassay.">Micro-nanoparticles magnetic trap: Toward high sensitivity and rapid microfluidic continuous flow enzyme immunoassay.</a> Biomicrofluidics. 14 (1), 014111 (2020).</li><li>Khizar, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Magnetic+nanoparticles+in+microfluidic+and+sensing:+From+transport+to+detection.">Magnetic nanoparticles in microfluidic and sensing: From transport to detection.</a> Electrophoresis. 41 (13-14), 1206-1224 (2020).</li><li>Podaru, G., Chikan, V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=CHAPTER+1:+Magnetism+in+nanomaterials:+Heat+and+force+from+colloidal+magnetic+particles.">CHAPTER 1: Magnetism in nanomaterials: Heat and force from colloidal magnetic particles.</a> Magnetic Nanomaterials: Applications in Catalysis and Life Sciences. , 1-24 (2017).</li><li>Reynoso-Hern&#225;ndez, K. B., Guevara-Pantoja, P. E., Caballero-Robledo, G. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Capture+efficiency+of+magnetic+nanoparticles+through+the+compaction+effect+of+a+microparticles+column.">Capture efficiency of magnetic nanoparticles through the compaction effect of a microparticles column.</a> Physical Review E. 104 (2), 024603 (2021).</li><li>Gale, B. K., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+review+of+current+methods+in+microfluidic+device+fabrication+and+future+commercialization+prospects.">A review of current methods in microfluidic device fabrication and future commercialization prospects.</a> Inventions. 3 (3), 60 (2018).</li><li>Liu, K., Fan, Z. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Thermoplastic+microfluidic+devices+and+their+applications+in+protein+and+DNA+analysis.">Thermoplastic microfluidic devices and their applications in protein and DNA analysis.</a> Analyst. 136 (7), 1288-1297 (2011).</li><li>Guckenberger, D. J., de Groot, T. E., Wan, A. M. D., Beebe, D. J., Young, E. W. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Micromilling:+A+method+for+ultra-rapid+prototyping+of+plastic+microfluidic+devices.">Micromilling: A method for ultra-rapid prototyping of plastic microfluidic devices.</a> Lab on a Chip. 15 (11), 2364-2378 (2015).</li><li>Guevara-Pantoja, P. E., Jim&#233;nez-Vald&#233;s, R. J., Garc&#237;a-Cordero, J. L., Caballero-Robledo, G. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Pressure-actuated+monolithic+acrylic+microfluidic+valves+and+pumps.">Pressure-actuated monolithic acrylic microfluidic valves and pumps.</a> Lab on a Chip. 18 (4), 662-669 (2018).</li><li>Guevara-Pantoja, P. E., Chavez-Pineda, O. G., Solis-Serrano, A. M., Garcia-Cordero, J. L., Caballero-Robledo, G. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+affordable+3D-printed+positioner+fixture+improves+the+resolution+of+conventional+milling+for+easy+prototyping+of+acrylic+microfluidic+devices.">An affordable 3D-printed positioner fixture improves the resolution of conventional milling for easy prototyping of acrylic microfluidic devices.</a> Lab on a Chip. 20 (17), 3179-3186 (2020).</li><li>Friedrich, C. R., Vasile, M. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Development+of+the+micromilling+process+for+high-aspect-ratio+microstructures.">Development of the micromilling process for high-aspect-ratio microstructures.</a> Journal of Microelectromechanical Systems. 5 (1), 33-38 (1996).</li><li>Malayath, G., Sidpara, A. M., Deb, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Study+of+different+materials+response+in+micro+milling+using+four+edged+micro+end+mill+tools.">Study of different materials response in micro milling using four edged micro end mill tools.</a> Journal of Manufacturing Processes. 56, 169-179 (2020).</li><li>Jiang, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+single+low-cost+microfabrication+approach+for+polymethylmethacrylate,+polystyrene,+polycarbonate+and+polysulfone+based+microdevices.">A single low-cost microfabrication approach for polymethylmethacrylate, polystyrene, polycarbonate and polysulfone based microdevices.</a> RSC Advances. 5 (45), 36036-36043 (2015).</li><li>Sun, Y., Kwok, Y. C., Nguyen, N. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Low-pressure,+high-temperature+thermal+bonding+of+polymeric+microfluidic+devices+and+their+applications+for+electrophoretic+separation.">Low-pressure, high-temperature thermal bonding of polymeric microfluidic devices and their applications for electrophoretic separation.</a> Journal of Micromechanics and Microengineering. 16 (8), 1681-1688 (2006).</li><li>Tsao, C. W., Hromada, L., Liu, J., Kumar, P., DeVoe, D. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Low+temperature+bonding+of+PMMA+and+COC+microfluidic+substrates+using+UV/ozone+surface+treatment.">Low temperature bonding of PMMA and COC microfluidic substrates using UV/ozone surface treatment.</a> Lab on a Chip. 7 (4), 499-505 (2007).</li><li>Bamshad, A., Nikfarjam, A., Khaleghi, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+new+simple+and+fast+thermally-solvent+assisted+method+to+bond+PMMA-PMMA+in+micro-fluidics+devices.">A new simple and fast thermally-solvent assisted method to bond PMMA-PMMA in micro-fluidics devices.</a> Journal of Micromechanics and Microengineering. 26 (6), 065017 (2016).</li><li>Ogilvie, I. R. G., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Reduction+of+surface+roughness+for+optical+quality+microfluidic+devices+in+PMMA+and+COC.">Reduction of surface roughness for optical quality microfluidic devices in PMMA and COC.</a> Journal of Micromechanics and Microengineering. 20 (6), 065016 (2010).</li></ol>

An acrylic microfluidic device for immunoassays using nanoparticles as immunosupport was fabricated using a micromilling technique. The method of direct manufacturing on the substrate has the advantage of avoiding the use of a master mold and the time and costs that this implies. However, it is limited to rapid prototyping and high-volume device manufacturing.
Here, we used a previously reported accessory piezoelectric platform for the milling machine12. The platform wa...

In recent years, microfluidics has played an important role in immunoassay techniques1. Miniaturization technology has many outstanding advantages compared to traditional immunoassays, such as reduced sample and reagent consumption, shorter incubation times, efficient solution exchange, and higher integration and automation2.
Furthermore, microfluidic systems in immunoassays, in association with magnetic nanoparticles as immunosupport, considerably reduce incubation times, achieving high detection sensitivity due to the increased surface-to-volume ratio3. Brownian movement of the particles improves the reaction kinetics during the formation of the antigen-antibody complex4,5. Moreover, the magnetic properties of nanoparticles provide the versatility to be integrated into different microfluidic device configurations, making them an ideal candidate for signaling and molecule capture in miniaturized on-chip biosensing systems5. However, magnetic forces are significantly weaker than drag forces at the nanometer scale due to the high surface-to-volume ratio6. Therefore, capturing nanoparticles for crucial immunoassay steps such as washing and detection can be challenging, and a conventional magnet is insufficient4.
An efficient way to manipulate the nanoparticles is the use of a microfluidic magnetic trap formed by iron microparticles, which are packed in a microfluidic structure3. Therefore, when an external magnet approaches, a complex interaction is created within the magnetized porous medium between the magnetic and flux forces. The magnetic force acting on the nanoparticles is strong enough to capture them and resist flow drag3,4,7. This approach requires microfabrication techniques that achieve resolutions in the order of a few micrometers to generate micrometric structures that retain the microparticles.
Current microfabrication techniques allow the high-resolution fabrication of structures from a few microns to hundreds of nanometers8. However, many of these techniques require specialized, expensive, or complicated equipment. One of the main difficulties is the requirement for a cleanroom for mold fabrication, which remains costly and time-consuming8,9. Recently, microfluidic engineers have overcome this drawback by developing a variety of alternative fabrication methods, with various advantages such as reduced costs, faster turnaround times, cheaper materials and tools, and increased functionality8. In this way, the development of new microfabrication techniques brought low-cost, non-cleanroom methods that achieve resolutions as low as 10 &#181;m8. Patterning can be used directly on a substrate without generating an expensive molding pattern, thus avoiding a time-consuming process. Direct fabrication methods include CNC milling, laser ablation, and direct lithography8. All these methods are suitable for producing high-aspect-ratio channels in a wide range of materials, regardless of their hardness9, enabling new and advantageous geometries, physical behaviors, and qualities in microfluidic devices8.
CNC micromilling creates microscale structures using cutting tools that remove bulk material from a substrate and is an effective fabrication method for microfluidic devices10,11. The micromilling technique can be useful in microfluidic applications to create microchannels and features directly on the work surface, offering a key advantage: a workpiece can be fabricated in a short time (less than 30 min), significantly reducing the turnaround time from design to prototype12. In addition, the wide availability of cutting accessories of different materials, sizes, and shapes makes CNC milling machines a suitable tool that has allowed the fabrication of different features in many types of low-cost disposable materials13.
Among all the materials commonly used in micromilling, thermoplastics remain a leading choice due to their many favorable properties and compatibility with biological applications10,14. Thermoplastics are an attractive substrate for microfluidic systems due to their significant advantages for developing low-cost, disposable analytical systems9. In addition, these materials are highly amenable to high-volume manufacturing processes, making them suitable for commercialization and mass production. For these reasons, thermoplastics such as PMMA have been considered reliable and robust materials since the early years of microfluidics10. Different protocols have been described to fabricate closed channels in thermoplastics, such as solvent bonding15, heat bonding16, and ultraviolet (UV)/ozone surface treatment bonding17.
In many cases, the positioning resolution achieved with conventional micromilling machines is not sufficient for some microfluidic applications that require structures smaller than 10 &#181;m. High-end micromilling has enough resolution. Unfortunately, due to high prices, its use is limited to a handful of users12. Previously, our research group reported the fabrication and manipulation of a low-cost tool that allows machining structures of less than 10 &#181;m, overcoming the resolution of conventional milling machines12. The fixture is a platform manufactured by 3D printing with simple electronics, containing three piezoelectric actuators. The surface contains hinge-shaped joints that allow it to be lifted when the piezoelectric elements act simultaneously. Z-axis displacement can be controlled with a resolution of 500 nm and an accuracy of &#177;1.5 &#181;m12.
This paper presents the steps of the manufacturing process of an acrylic device (PMMA) through a micromilling technique. The chip design consists of a main channel 200 &#181;m wide and 200 &#181;m high and a side channel with the same dimensions to purge the flow of the reagents. In the central region, the channel is interrupted by a physical restriction of only 5 &#181;m in height, fabricated with the 3D-printed piezoelectric platform made by this group12, to capture magnetic microparticles that make up a magnetic trap for nanoparticles by placing an external magnet. We show the operation of the microfluidic device by performing an immunoassay to detect a commercial antibody using lysozyme as a model antigen conjugated to 100 nm magnetic nanoparticles. This device combines different features that make it unique4: the use of magnetic nanoparticles as immune support reduces the total test time from hours to minutes; using a fluorogenic enzyme for detection allows for limits of detection that are comparable to those of standard enzyme-linked immunosorbent assays (ELISAs); and the use of a thermoplastic as a fabrication material makes it compatible with mass production, which was not the case for previous microfluidic nanoparticles&#39; magnetic traps3, and makes it an excellent candidate to develop POCT.

<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>0.008 Endmill</td>
			<td>KYOCERA SGS&#160;</td>
			<td>2204</td>
			<td>2FL 0.008x1/8x0.12x1-1/12</td>
		</tr>
		<tr>
			<td>0.032 Endmill</td>
			<td>KYOCERA SGS&#160;</td>
			<td>2228</td>
			<td>2FL 0.032x1/8x0.48x1-1/12</td>
		</tr>
		<tr>
			<td>Carbonyl-iron microparticles&#160;</td>
			<td>Sigma-Aldrich</td>
			<td>44890</td>
			<td>7 &#956;m&#160;</td>
		</tr>
		<tr>
			<td>Chloroform</td>
			<td>Fermont</td>
			<td>6201</td>
			<td>Health Hazard: Moderate 
			Flammability: None 
			Reactivity: None 
			Contact Hazard: Moderate&#160;</td>
		</tr>
		<tr>
			<td>CMOS camera Moment</td>
			<td>Teledyne Photometrics</td>
			<td></td>
			<td>Sensor Technology: CMOS 
			Quantum Efficiency: 73% 
			Pixel Size: 4.5 &#181;m x 4.5 &#181;m 
			Supported Interfaces: USB 3.2 Gen 2</td>
		</tr>
		<tr>
			<td>Dr Engrave Software</td>
			<td>Roland DGA Corporation</td>
			<td></td>
			<td>Engraving software to design and create the engraving path on the surface</td>
		</tr>
		<tr>
			<td>Extraction hood</td>
			<td>Unknown</td>
			<td>Unknown</td>
			<td></td>
		</tr>
		<tr>
			<td>Flexible Plastic Tubing</td>
			<td>Tygon</td>
			<td>AAD04103</td>
			<td>ID = 0.020, OD = 0.060</td>
		</tr>
		<tr>
			<td>Fluorescence microsope&#160;</td>
			<td>ZEISS</td>
			<td>Axio Vert.A1</td>
			<td></td>
		</tr>
		<tr>
			<td>High Precision Dispense Needle</td>
			<td>Loctite</td>
			<td>98612</td>
			<td></td>
		</tr>
		<tr>
			<td>Homemade piezoelectric controller application</td>
			<td>LabView&#160;</td>
			<td></td>
			<td>See reference 12 for more details.</td>
		</tr>
		<tr>
			<td>Loctite 495 instant adhesive</td>
			<td>Henkel</td>
			<td>49503</td>
			<td>Apply with micropipette tip or dispensing needle&#160;</td>
		</tr>
		<tr>
			<td>MagJET Separation Rack</td>
			<td>thermoscientific</td>
			<td></td>
			<td>12 x 1.5 mL</td>
		</tr>
		<tr>
			<td>Mechanic press</td>
			<td>Home-made</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Milling Machine</td>
			<td>Roland</td>
			<td>MDX-50</td>
			<td></td>
		</tr>
		<tr>
			<td>Piezoelectric platform&#160;</td>
			<td>Home-made</td>
			<td></td>
			<td>See reference 12</td>
		</tr>
		<tr>
			<td>Polymethylmethacrylate - Sheet - PMMA, Acrylic</td>
			<td>Goodfellow</td>
			<td>ME303018/1</td>
			<td>Thickness: 1.3 mm, Transparency: Clear/Transparent</td>
		</tr>
		<tr>
			<td>PVCamTest software</td>
			<td>Teledyne Photometrics</td>
			<td>Version 3.10.107&#160;</td>
			<td>Image acquisition software</td>
		</tr>
		<tr>
			<td>Stereo microscope</td>
			<td>Nikon</td>
			<td>SMZ 7457</td>
			<td></td>
		</tr>
		<tr>
			<td>SuperMag Carboxyl Beads</td>
			<td>Ocean NanoTech</td>
			<td>KSC0100</td>
			<td>100 nm</td>
		</tr>
		<tr>
			<td>Syringe pump</td>
			<td>kd Scientific</td>
			<td>&#160;KDS200</td>
			<td>Can hold up to two syringes</td>
		</tr>
		<tr>
			<td>Utrasonic bath</td>
			<td>Branson</td>
			<td>2800</td>
			<td></td>
		</tr>
		<tr>
			<td>VPanel software&#160;</td>
			<td>Windows OS</td>
			<td>Version 1.0.3.0</td>
			<td>Software for controlling the micromilling machine</td>
		</tr>
	</tbody>
</table>

computer numerical control micromilling of a microfluidic acrylic device with a staggered restriction for magnetic nanoparticle-based immunoassays

Microfluidic systems have greatly improved immunoassay techniques. However, many microfabrication techniques require specialized, expensive, or complicated equipment, making fabrication costly and incompatible with mass production, which is one of the most important preconditions for point-of-care tests (POCT) to be adopted in low-resource settings. This work describes the fabrication process of an acrylic (polymethylmethacrylate, PMMA) device for nanoparticle-conjugated enzymatic immunoassay testing using the computer numerical control (CNC) micromilling technique. The functioning of the microfluidic device is shown by performing an immunoassay to detect a commercial antibody using lysozyme as a model antigen conjugated to 100 nm magnetic nanoparticles. This device integrates a physical staggered restriction of only 5 &#181;m in height, used to capture magnetic microparticles that make up a magnetic trap by placing an external magnet. In this way, the magnetic force on the immunosupport of conjugated nanoparticles is enough to capture them and resist flow drag. This microfluidic device is particularly suitable for low-cost mass production without the loss of precision for immunoassay performance.

It was possible to establish a highly reproducible fabrication protocol that improves the resolution of the conventional micromilling technique. Using this protocol, the fabrication of a channel as small as 5 &#181;m in height that operates as a staggered restriction in a 200 &#181;m high channel is achieved. The simple design of the staggered restriction captures iron microparticles of 7.5 &#181;m diameter which, when compacted in the microchannel, allow the creation of a magnetic trap when an external magnet approaches...

Watch this Scientific Journal Video about Computer Numerical Control Micromilling of a Microfluidic Acrylic Device with a Staggered Restriction for Magnetic Nanoparticle-Based Immunoassays at JoVE.com

Computer Numerical Control Micromilling of a Microfluidic Acrylic Device with a Staggered Restriction for Magnetic Nanoparticle-Based Immunoassays

Microfluidics is a powerful tool for the development of diagnostic tests. However, expensive equipment and materials, as well as laborious fabrication and handling techniques, are often required. Here, we detail the fabrication protocol of an acrylic microfluidic device for magnetic micro- and nanoparticle-based immunoassays in a low-cost and simple-to-use setting.

Microfluidic systems have greatly improved immunoassay techniques. However, many microfabrication techniques require specialized, expensive, or ...

Research

JoVE Journal

Engineering

Terahertz Microfluidic Sensing Using a Parallel-plate Waveguide Sensor

Refractive index (RI) sensing is a powerful noninvasive and label-free sensing technique for the identification, detection and monitoring of microfluidic ...

Implementation of a Reference Interferometer for Nanodetection

A thermally and mechanically stabilized fiber interferometer suited for examining ultra-high quality factor microcavities is fashioned. After assessing ...

SSVEP-based Experimental Procedure for Brain-Robot Interaction with Humanoid Robots

Brain-Robot Interaction (BRI), which provides an innovative communication pathway between human and a robotic device via brain signals, is prospective in ...

Capillary-based Centrifugal Microfluidic Device for Size-controllable Formation of Monodisperse Microdroplets

Here, we demonstrate a simple method for the rapid production of size-controllable, monodisperse, W/O microdroplets using a capillary-based centrifugal ...

Solvent Bonding for Fabrication of PMMA and COP Microfluidic Devices

Thermoplastic microfluidic devices offer many advantages over those made from silicone elastomers, but bonding procedures must be developed for each ...

Gain-compensation Methodology for a Sinusoidal Scan of a Galvanometer Mirror in Proportional-Integral-Differential Control Using Pre-emphasis Techniques

Galvanometer mirrors are used for optical applications such as target tracking, drawing, and scanning control because of their high speed and accuracy. ...

Study of Siphon Breaker Experiment and Simulation for a Research Reactor

Under the design conditions of a research reactor, the siphon phenomenon induced by pipe rupture can cause continuous outward flow of water. To prevent ...

A Silicon-tipped Fiber-optic Sensing Platform with High Resolution and Fast Response

In this article, we introduce an innovative and practically promising fiber-optic sensing platform (FOSP) that we proposed and demonstrated recently. This ...

Production of a Strain-Measuring Device with an Improved 3D Printer

A traditional strain measurement sensor needs to be electrified and is susceptible to electromagnetic interference. In order to solve the fluctuations in ...

Pneumatically Driven Microfluidic Platform for Micro-Particle Concentration

The present article introduces a method for fabricating and operating a pneumatic valve to control particle concentration using a microfluidic platform. ...