Name: preparation of contiguous bisaziridines for regioselective ring-opening reactions
Uploaded: 2022-07-28T14:30:00
Description: Watch this Scientific Journal Video about Preparation of Contiguous Bisaziridines for Regioselective Ring-Opening Reactions at JoVE.com

This research was supported by the Korea Basic Science Institute (National Research Facilities and Equipment Center) grant funded by the Ministry of Education (2022R1A6C101A751). This work was also supported by the National Research Foundation of Korea (NRF) grants (2020R1A2C1007102 and 2021R1A5A6002803).

The details of all the synthesized products (1-5), including the structure, full NMR spectra, optical purity, and HRMS-MALDI data, are provided in Supplementary File 1.
1. Synthesis of 3-(aziridin-2-yl)acryl aldehyde (1a)
<ol>
	<li>Flame dry a 50 mL round-bottomed flask equipped with a stirrer bar and a septum under vacuum conditions. Cool it to room temperature while filling it with argon gas.</li>
	<li>Add anhydrous toluene (19 mL) and (<e...

The formation of an inseparable mixture of diastereomers has occasionally been observed during the course of organocatalytic aziridination of chiral 3-[1-(1-phenylethyl)aziridin-2-yl)]acrylaldehyde, when N-Boc-O-tosyl or N-Ts-O-tosyl hydroxylamine was used as the nitrogen source. Further, the yield of contiguous bisaziridine product decreased when the amount of diaryl silyl ether prolinol as catalyst was increased from 7 mol% to 20 mol%47,<sup class="...

Rational design of small organic molecules with diverse reactive sites that precisely control product selectivity is a key goal in modern organic synthesis and green chemistry1,2,3,4,5,6,7,8. To achieve this goal, we were interested in the modular synthesis of aziridines. Aziridines are of interest to most organic chemists, owing to their structurally important framework9 with an electronically diverse set of N-substituents that can lead to regioselective ring-opening reactions with multiple nucleophiles10,11,12,13,14,15,16,17,18,19, and varied pharmacological activities such as antitumor, antimicrobial, and antibacterial properties. Despite the advances in aziridine chemistry, non-activated aziridine and activated aziridine have independent syntheses and ring-opening reactions in the literature20.
Therefore, we aimed to synthesize contiguous bisaziridines comprising both the non-activated and activated aziridines. These contiguous bisaziridines can be used to systematically rationalize a chemoselective ring-opening pattern based on the following electronic properties of the two different aziridines and their reactivity to nucleophiles20,21,22,23,24: a) activated aziridines, in which the electron-withdrawing substituents conjugatively stabilize the negative charge on the nitrogen, readily react with multiple nucleophiles to allow ring-opened products; b) non-activated aziridines, in which the nitrogen is bound to the electron-donating substituents, are considerably inert toward nucleophiles; hence, a pre-activation step with a suitable activator (mainly Br&#248;nsted or Lewis acids) is required to afford the ring-opened products in high yields20,21,25,26.
The present study describes the rational design of contiguous bisaziridines as chiral building blocks via transition-metal-free organocatalysis and the synthesis of diverse nitrogen-rich molecules utilizing predictive modeling tools for ring-opening reactions of bisaziridines. This study aims to stimulate the advancement of practical methods for the construction of nitrogen-enriched bioactive compounds and natural products and the polymerization of aziridines.

<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>(R)-(+)-&#945;,&#945;-Diphenyl-2-pyrrolidinemethanol trimethylsilyl ether</td>
			<td>Sigma-Aldrich</td>
			<td>677191</td>
			<td>reagent</td>
		</tr>
		<tr>
			<td>(R)-1-((R)-1-phenylethyl)aziridine-2-carbaldehyde</td>
			<td>Imagene Co.,Ltd.</td>
			<td></td>
			<td>reagent</td>
		</tr>
		<tr>
			<td>(S)-(&#8211;)-&#945;,&#945;-Diphenyl-2-pyrrolidinemethanol trimethylsilyl ether</td>
			<td>Sigma-Aldrich</td>
			<td>677183</td>
			<td>reagent</td>
		</tr>
		<tr>
			<td>(S)-2-(diphenyl((trim ethylsilyl)oxy)methyl)pyrrolidine</td>
			<td>Sigma-Aldrich</td>
			<td>677183</td>
			<td>reagent</td>
		</tr>
		<tr>
			<td>(Triphenylphosphoranylidene) acetaldehyde</td>
			<td>Sigma-Aldrich</td>
			<td>280933</td>
			<td>reagent</td>
		</tr>
		<tr>
			<td>1,2-Dichloroethane</td>
			<td>Sigma-Aldrich</td>
			<td>284505</td>
			<td>solvent</td>
		</tr>
		<tr>
			<td>AB Sciex 4800 Plus MALDI TOFTM (2,5-dihydroxybenzoic acid (DHB) matrix</td>
			<td>Sciex</td>
			<td></td>
			<td>High resolution mass spectra</td>
		</tr>
		<tr>
			<td>Acetic acid</td>
			<td>Sigma-Aldrich</td>
			<td>A6283</td>
			<td>reagent</td>
		</tr>
		<tr>
			<td>Ammonium chloride</td>
			<td>Sigma-Aldrich</td>
			<td>254134</td>
			<td>reagent</td>
		</tr>
		<tr>
			<td>aniline</td>
			<td>Sigma-Aldrich</td>
			<td>132934</td>
			<td>reagent</td>
		</tr>
		<tr>
			<td>Autopol III digital polarimeter</td>
			<td>Rudolph Research Analytical</td>
			<td></td>
			<td>polarimeter</td>
		</tr>
		<tr>
			<td>AVANCE III HD (400 MHz) spectrometer</td>
			<td>Bruker</td>
			<td></td>
			<td>NMR spectrometer</td>
		</tr>
		<tr>
			<td>Bruker Ascend 500 (500 MHz)</td>
			<td>Bruker</td>
			<td></td>
			<td>NMR spectrometer</td>
		</tr>
		<tr>
			<td>Celite 535</td>
			<td>Sigma-Aldrich</td>
			<td>22138</td>
			<td>For Celite pad</td>
		</tr>
		<tr>
			<td>Dichloromethane</td>
			<td>Sigma-Aldrich</td>
			<td>270997</td>
			<td>solvent</td>
		</tr>
		<tr>
			<td>Di-tert-butyl dicarbonate</td>
			<td>Sigma-Aldrich</td>
			<td>361941</td>
			<td>reagent</td>
		</tr>
		<tr>
			<td>Ethyl Acetate</td>
			<td>Sigma-Aldrich</td>
			<td>270989</td>
			<td>solvent</td>
		</tr>
		<tr>
			<td>Ethyl nitroacetate</td>
			<td>Sigma-Aldrich</td>
			<td>192333</td>
			<td>reagent</td>
		</tr>
		<tr>
			<td>Imidazole</td>
			<td>Sigma-Aldrich</td>
			<td>I2399</td>
			<td>reagent</td>
		</tr>
		<tr>
			<td>INOVA 400WB (400 MHz)</td>
			<td>Varian</td>
			<td></td>
			<td>NMR spectrometer</td>
		</tr>
		<tr>
			<td>JMS-700</td>
			<td>JEOL</td>
			<td></td>
			<td>High resolution mass spectra</td>
		</tr>
		<tr>
			<td>Methanol</td>
			<td>Sigma-Aldrich</td>
			<td>322415</td>
			<td>solvent</td>
		</tr>
		<tr>
			<td>N-Boc-O-tosylhydroxylamine</td>
			<td>Sigma-Aldrich</td>
			<td>775037</td>
			<td>reagent</td>
		</tr>
		<tr>
			<td>P-2000</td>
			<td>JASCO</td>
			<td></td>
			<td>polarimeter</td>
		</tr>
		<tr>
			<td>Palladium hydroxide on carbon</td>
			<td>Sigma-Aldrich</td>
			<td>212911</td>
			<td>reagent</td>
		</tr>
		<tr>
			<td>Phenyl-1H-tetrazole-5-thiol</td>
			<td>TCI</td>
			<td>P0640</td>
			<td>reagent</td>
		</tr>
		<tr>
			<td>Silica gel</td>
			<td>Sigma-Aldrich</td>
			<td>227196</td>
			<td>For flash clromatography</td>
		</tr>
		<tr>
			<td>Silica gel on TLC plates</td>
			<td>Merck</td>
			<td>60768</td>
			<td>TLC plate</td>
		</tr>
		<tr>
			<td>Sodium acetate</td>
			<td>Sigma-Aldrich</td>
			<td>S8750</td>
			<td>reagent</td>
		</tr>
		<tr>
			<td>Sodium azide</td>
			<td>Sigma-Aldrich</td>
			<td>S2002</td>
			<td>reagent</td>
		</tr>
		<tr>
			<td>Sodium borohydride</td>
			<td>Sigma-Aldrich</td>
			<td>452882</td>
			<td>reagent</td>
		</tr>
		<tr>
			<td>Sodium carbonate</td>
			<td>Sigma-Aldrich</td>
			<td>S2127</td>
			<td>reagent</td>
		</tr>
		<tr>
			<td>tert-Butyldimethylsilyl chloride</td>
			<td>Sigma-Aldrich</td>
			<td>190500</td>
			<td>reagent</td>
		</tr>
		<tr>
			<td>Tetrahydrofuran</td>
			<td>Sigma-Aldrich</td>
			<td>401757</td>
			<td>solvent</td>
		</tr>
		<tr>
			<td>Toluene</td>
			<td>Sigma-Aldrich</td>
			<td>244511</td>
			<td>solvent</td>
		</tr>
		<tr>
			<td>Zinc bromide</td>
			<td>Sigma-Aldrich</td>
			<td>230022</td>
			<td>reagent</td>
		</tr>
		<tr>
			<td>Zinc chloride</td>
			<td>Sigma-Aldrich</td>
			<td>429430</td>
			<td>reagent</td>
		</tr>
	</tbody>
</table>

preparation of contiguous bisaziridines for regioselective ring-opening reactions

Aziridines, a class of reactive organic molecules containing a three-membered ring, are important synthons for the synthesis of a large variety of functionalized nitrogen-containing target compounds through the regiocontrolled ring-opening of C-substituted aziridines. Despite the tremendous progress in aziridine synthesis over the past decade, accessing contiguous bisaziridines efficiently remains difficult. Therefore, we were interested in synthesizing contiguous bisaziridines bearing an electronically diverse set of N-substituents beyond the single aziridine backbone for regioselective ring-opening reactions with diverse nucleophiles. In this study, chiral contiguous bisaziridines were prepared by organocatalytic asymmetric aziridination of chiral (E)-3-((S)-1-((R)-1-phenylethyl)aziridin-2-yl)acrylaldehyde with N-Ts-O-tosyl or N-Boc-O-tosyl hydroxylamine as the nitrogen source in the presence of (2S)-[diphenyl(trimethylsilyloxy)methyl]pyrrolidine as a chiral organocatalyst. Also demonstrated here are representative examples of regioselective ring-opening reactions of contiguous bisaziridines with a variety of nucleophiles such as sulfur, nitrogen, carbon, and oxygen, and the application of contiguous bisaziridines to the synthesis of multi-substituted chiral pyrrolidines by Pd-catalyzed hydrogenation.

To investigate the achievability of preparing a contiguous bisaziridine, (E)-3-((S)-1-((R)-1-phenylethyl)aziridin-2-yl)acrylaldehyde (1a) was first synthesized as a model substrate according to the procedure mentioned in step 1 (Figure 1)28.
<img alt="Figure 1" class="xfigimg" src="/files/ftp_upload/64019/64019fig01.jpg" /> 
Figu...

Watch this Scientific Journal Video about Preparation of Contiguous Bisaziridines for Regioselective Ring-Opening Reactions at JoVE.com

Preparation of Contiguous Bisaziridines for Regioselective Ring-Opening Reactions

Contiguous bisaziridines containing non-activated and activated aziridines were synthesized by asymmetric organocatalytic aziridinations and then subjected to chemoselective ring-opening reactions under acidic or basic conditions. The non-activated aziridine ring opens with less reactive nucleophiles under acidic conditions, whereas the activated aziridine ring opens with more reactive nucleophiles under basic conditions.

Aziridines, a class of reactive organic molecules containing a three-membered ring, are important synthons for the synthesis of a large variety of ...

Research

JoVE Journal

Chemistry

Microwave-assisted Intramolecular Dehydrogenative Diels-Alder Reactions for the Synthesis of Functionalized Naphthalenes/Solvatochromic Dyes

Functionalized naphthalenes have applications in a variety of research fields ranging from the synthesis of natural or biologically active molecules to ...

Hot Biological Catalysis: Isothermal Titration Calorimetry to Characterize Enzymatic Reactions

Isothermal titration calorimetry (ITC) is a well-described technique that measures the heat released or absorbed during a chemical reaction, using it as ...

Real-time Monitoring of Reactions Performed Using Continuous-flow Processing: The Preparation of 3-Acetylcoumarin as an Example

By using inline monitoring, it is possible to optimize reactions performed using continuous-flow processing in a simple and rapid way. It is also possible ...

A Protocol for Safe Lithiation Reactions Using Organolithium Reagents

Organolithium reagents are powerful tools in the synthetic chemist&#39;s toolbox. However, the extreme pyrophoric nature of the most reactive reagents ...

Controlled Photoredox Ring-Opening Polymerization of O-Carboxyanhydrides Mediated by Ni/Zn Complexes

Controlled Photoredox Ring-Opening Polymerization of O-Carboxyanhydrides Mediated by Ni/Zn Complexes

Here, we describe an effective protocol that combines photoredox Ni/Ir catalysis with the use of a Zn-alkoxide for efficient ring-opening polymerization, ...

Enzymatic Cascade Reactions for the Synthesis of Chiral Amino Alcohols from L-lysine

Amino alcohols are versatile compounds with a wide range of applications. For instance, they have been used as chiral scaffolds in organic synthesis. ...

Preparation and Characterization of C60/Graphene Hybrid Nanostructures

Preparation and Characterization of C60/Graphene Hybrid Nanostructures

Physical thermal deposition in a high vacuum environment is a clean and controllable method for fabricating novel molecular nanostructures on graphene. We ...

Preparation of Stable Bicyclic Aziridinium Ions and Their Ring-Opening for the Synthesis of Azaheterocycles

Bicyclic aziridinium ions were generated by the removal of an appropriate leaving group through internal nucleophilic attack by nitrogen atom in the ...

Regioselective O-Glycosylation of Nucleosides via the Temporary 2',3'-Diol Protection by a Boronic Ester for the Synthesis of Disaccharide Nucleosides

Regioselective O-Glycosylation of Nucleosides via the Temporary 2',3'-Diol Protection by a Boronic Ester for the Synthesis of Disaccharide Nucleosides

Disaccharide nucleosides, which consist of disaccharide and nucleobase moieties, have been known as a valuable group of natural products having ...

Photogeneration of N-Heterocyclic Carbenes: Application in Photoinduced Ring-Opening Metathesis Polymerization

We report a method to generate the N-heterocyclic carbene (NHC) 1,3-dimesitylimidazol-2-ylidene (IMes) under UV-irradiation at 365 nm to characterize IMes ...