Name: high-speed optical diagnostics of a supersonic ping-pong cannon
Uploaded: 2023-03-24T13:10:00
Description: Watch this Scientific Journal Video about High-Speed Optical Diagnostics of a Supersonic Ping-Pong Cannon at JoVE.com

Dette arbejde understøttes af NSF Division of Undergraduate Education (pris # 2021157) som en del af IUSE: EPJ-programmet

1. Bygning og samling af bordtenniskanonen (PPC)
<ol><li>Saml alle komponenterne i PPC i henhold til figur 1.</li>
	<li>Indsæt to akrylvinduer med høj klarhed i kanonens sider for at muliggøre optisk sondering på tværs af kanonens indre.<ol><li>Bor to 1/2 i huller gennem modsatte sider af PVC nær kanonens udgang.</li>
		<li>Forbered to 1/8 i tykke akrylvinduer ved hjælp af en lasergraver. Download de tre supplerende svg-filer. BEMÆRK: Der er tre filer mærket "J...

<ol>
	<li>Peterson, R. W., Pulford, B. N., Stein, K. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+ping-pong+cannon:+A+closer+look.">The ping-pong cannon: A closer look.</a> The Physics Teacher. 43 (1), 22-25 (2005).</li><li>Olson, G., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+role+of+shock+waves+in+expansion+tube+accelerators.">The role of shock waves in expansion tube accelerators.</a> American Journal of Physics. 74 (12), 1071-1076 (2006).</li><li>Cockman, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Improved+vacuum+bazooka.">Improved vacuum bazooka.</a> The Physics Teacher. 41 (4), 246-247 (2003).</li><li>Ayars, E., Buchholtz, L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Analysis+of+the+vacuum+cannon.">Analysis of the vacuum cannon.</a> American Journal of Physics. 72 (7), 961-963 (2004).</li><li>Thuecks, D. J., Demas, H. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Modeling+the+effect+of+air-intake+aperture+size+in+the+ping-pong+ball+cannon.">Modeling the effect of air-intake aperture size in the ping-pong ball cannon.</a> American Journal of Physics. 87 (2), 136-140 (2019).</li><li>Liepmann, H. W., Roshko, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Elements of gas dynamics. , (1957).</li><li>Settles, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Schlieren and shadowgraph techniques. , (2001).</li><li>Geisert, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+single+mirror+schlieren+optical+system.">A single mirror schlieren optical system.</a> American Journal of Physics. 52 (5), 467 (1984).</li><li>French, R. M., Gorrepati, V., Alcorta, E., Jackson, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+mechanics+of+a+ping-pong+ball+gun.">The mechanics of a ping-pong ball gun.</a> Experimental Techniques. 32 (1), 24-30 (2008).</li><li>French, M., Zehrung, C., Stratton, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+supersonic+ping-pong+gun.">A supersonic ping-pong gun.</a> arXiv. , (2013).</li><li>French, F., Choudhuri, R., Stratton, J., Zehrung, C., Huston, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+modular+supersonic+ping-pong+gun.">A modular supersonic ping-pong gun.</a> arXiv. , (2018).</li><li>Fredrick, C. D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Complementary+studies+on+supersonic+nozzle+flow:+heterodyne+interferometry,+high-speed+video+shadowgraphy,+and+numerical+simulation.">Complementary studies on supersonic nozzle flow: heterodyne interferometry, high-speed video shadowgraphy, and numerical simulation.</a> WIT Transactions on Modelling and Simulation. 59, 223-234 (2015).</li></ol>

Vi har præsenteret en metode til konstruktion af en PPC og en SSPPC sammen med optisk diagnostik til måling af kuglehastigheder og til karakterisering af stødudbredelse nær kanonens udgang. Standard PPC er konstrueret med en 2 m sektion på 1,5 i skema 80 PVC-rør. Røret er forsynet med flanger i hver ende, hurtigkoblingsvakuumbeslag og akrylvinduer nær udgangen til laserdiagnostik. Et detaljeret skema over PPC er vist i figur 1. Før fyring indsættes en bordtenniskugle i kanonen, og ...

PPC er en populær fysikdemonstration, der bruges til at vise det enorme lufttryk, som folk konstant udsættes for 1,2,3,4,5. Demonstrationen involverer placeringen af en bordtennisbold i en rørsektion, der har en indre diameter, der er omtrent lig med kuglens diameter. Røret forsegles i hver ende med tape og evakueres til et indre tryk på mindre end 2 Torr. Båndet i den ene ende af røret punkteres, hvilket tillader luft at komme ind i kanonen og får kuglen til at opleve topaccelerationer på ca. 5.000 g. Kuglen, som accelereres af atmosfærisk tryk alene, forlader kanonen med en hastighed på ca. 300 m / s efter at have kørt 2 m.
Selvom PPC almindeligvis betjenes som en simpel demonstration af atmosfærisk tryk, er det også et apparat, der udviser kompleks komprimerbar flowfysik, hvilket har resulteret i adskillige åbne studenterprojekter. Boldens dynamik påvirkes af sekundære faktorer såsom vægfriktion, lækage af luft omkring bolden og dannelsen af chokbølger af den accelererende kugle. Den betydelige acceleration af bolden introducerer en kompressionsbølge med stor amplitude, der bevæger sig ned ad røret foran bolden. Disse kompressioner bevæger sig hurtigere end den lokale lydhastighed, hvilket resulterer i en stejlning af kompressionsbølgen og den endelige dannelse af en stødbølge6. Tidligere arbejde har undersøgt den hurtige opbygning af tryk ved udgangen af røret på grund af refleksionerne af stødbølgen mellem kuglen og den tapede udgang af røret og den resulterende løsrivelse af båndet inden udgangen af kuglen2. Højhastighedsvideo ved hjælp af en schlieren-billeddannelsesteknik med et enkelt spejl har afsløret båndets reaktion på de reflekterende chokbølger og båndets eventuelle løsrivelse ved udgangen af PPC 7,8 (video 1). PPC fungerer således både som en simpel demonstration af lufttryk, der fascinerer publikum i alle aldre og som en enhed, der udviser kompleks væskefysik, som kan studeres i detaljer i en laboratorieindstilling.
Med standard PPC er bordtennisboldhastighederne begrænset af lydens hastighed. Denne grundlæggende version af PPC er dækket af dette papir sammen med en modificeret kanon, der bruges til at øge bolden til supersoniske hastigheder. I tidligere arbejde af French et al. er supersoniske bordtennisboldhastigheder opnået ved at udnytte trykdrevet strømning gennem en konvergerende-divergerende dyse 9,10,11. SSPPC, der præsenteres her, bruger et tryksat (driver) rør til at give en større trykforskel på bordtennisbolden end tilvejebragt af atmosfærisk tryk alene. En tynd polyestermembran bruges til at adskille driverrøret fra det evakuerede (drevne) rør, der indeholder kuglen. Denne membran brister under tilstrækkeligt gagetryk (generelt 5-70 psi, afhængigt af membrantykkelsen), hvilket accelererer bordtennisbolden til hastigheder op til Mach 1,4. Den supersoniske bordtennisbold producerer en stående chokbølge, som det kan ses ved hjælp af højhastigheds shadowgraph-billeddannelsesteknikker 7,12 (Video 2).
En HeNe-laser med lav effekt (klasse II) bruges til at udføre optiske diagnostiske undersøgelser af kanonens ydeevne. HeNe laserstrålen er opdelt i to stier, hvor den ene sti krydser gennem et sæt akrylvinduer nær kanonens udgang og den anden sti krydser lige forbi kanonens udgang. Hver sti slutter på en fotomodtager, og signalet vises på et dobbeltkanals oscilloskop. Oscilloskopsporet, der registreres under affyringen af kanonen, afslører information om både hastigheden af den accelererede bordtennisbold og de komprimerbare strømninger og stødbølger, der går forud for kuglens udgang fra kanonen. Hastigheden af bordtennisbolden med en diameter på 40 mm ved hvert strålested er direkte relateret til den tid, bolden blokerer strålen. En følsom "knivsæg" støddetekteringsopsætning opnås ved at dække halvdelen af detektoren med et stykke sort elektrisk tape og placere kanten af båndet i midten af strålen2. Med denne opsætning er små afbøjninger af He-Ne-laserstrålen, produceret af det komprimerbare flowinducerede indeks for brydningsgradienter, tydeligt synlige som spændingsspidser på oscilloskopsporet. Chokbølgerne, der bevæger sig mod kanonudgangen, og de reflekterede chokbølger afbøjer strålen i modsatte retninger og identificeres derfor ved enten en positiv eller negativ spændingsspids.
Her giver vi instruktioner til konstruktion og anvendelse af en optimeret PPC og SSPPC samt optiske diagnostiske teknikker (figur 1, figur 2 og figur 3). De optiske diagnostiske teknikker og målinger er udviklet gennem tidligere års studie 1,2.

<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>15 V Current Limited Power Supply</td>
			<td>New Focus</td>
			<td>0901</td>
			<td>Quantity: 1</td>
		</tr>
		<tr>
			<td>2&#34; x 6&#34; Plank</td>
			<td>Home Depot</td>
			<td>BTR KD-HT S</td>
			<td>Quantity: 1</td>
		</tr>
		<tr>
			<td>5.0&#34; 40-pin 800 x 480 TFT Display</td>
			<td>Adafruit</td>
			<td>1680</td>
			<td>Quantity: 1</td>
		</tr>
		<tr>
			<td>Absolute Pressure Gauge</td>
			<td>McMaster-Carr</td>
			<td>1791T3</td>
			<td>0&#8211;20 Torr | Quantity: 1</td>
		</tr>
		<tr>
			<td>Air Compressor</td>
			<td>Porter Cable</td>
			<td>C2002</td>
			<td>6 gallon | Quantity: 1</td>
		</tr>
		<tr>
			<td>Arduino UNO Rev3</td>
			<td>Arduino</td>
			<td>A000066</td>
			<td>Quantity: 1</td>
		</tr>
		<tr>
			<td>ASME-Code Fast-Acting Pressure-Relief Valve 
			for Air</td>
			<td>McMaster-Carr</td>
			<td>5784T13</td>
			<td>Nickel-Plated, 3/8 NPT, 125 PSI Set Pressure | Quantity: 1</td>
		</tr>
		<tr>
			<td>Black Electrical Tape</td>
			<td>McMaster-Carr</td>
			<td>76455A21</td>
			<td>Quantity: 1</td>
		</tr>
		<tr>
			<td>BNC Cable</td>
			<td>Digikey Number</td>
			<td>115-095-850-277M050-ND</td>
			<td>Quantity: 2</td>
		</tr>
		<tr>
			<td>Broadband Dielectric Mirror</td>
			<td>THORLABS</td>
			<td>BB05-E02</td>
			<td>400&#8211;750 nm, &#216;1/2&#34; | Quantity: 1</td>
		</tr>
		<tr>
			<td>C-Clamp</td>
			<td>McMaster-Carr</td>
			<td>5133A15</td>
			<td>3&#34; opening, 2&#34; reach | Quantity: 6</td>
		</tr>
		<tr>
			<td>Cam Clamp</td>
			<td>Rockler</td>
			<td>58252</td>
			<td>Size: 5/16&#34;-18 | Quantity: 2 (2 pack)</td>
		</tr>
		<tr>
			<td>Digital Pressure Gauge</td>
			<td>Omega Engineering, Inc.</td>
			<td>DPG104S</td>
			<td>0&#8211;100 Psi Absolute Pressure, With Output and Alarms | Quantity: 1</td>
		</tr>
		<tr>
			<td>Digital Pressure Gauge</td>
			<td>Omega Engineering, Inc.</td>
			<td>DPG104S</td>
			<td>0&#8211;100 Psi Absolute Pressure, With Output and Alarms | Quantity: 1</td>
		</tr>
		<tr>
			<td>Draw Latch</td>
			<td>McMaster-Carr</td>
			<td>1889A37</td>
			<td>Size: 3 3/4&#34; x 7/8&#34; | Quantity: 4</td>
		</tr>
		<tr>
			<td>Driver Board for 40-pin TFT Touch Displays</td>
			<td>Adafruit</td>
			<td>1590</td>
			<td>Quantity: 1</td>
		</tr>
		<tr>
			<td>Full Faced EPDM Gasket</td>
			<td>PVC Fittings Online</td>
			<td>155G125125FF150</td>
			<td>Quantity: 2</td>
		</tr>
		<tr>
			<td>Gasket Material</td>
			<td>McMaster-Carr</td>
			<td>9470K41</td>
			<td>15&#34; x 15&#34;, 1/8&#34; thick | Quantity: 1</td>
		</tr>
		<tr>
			<td>Glowforge Plus</td>
			<td>Glowforge</td>
			<td>Glowforge Plus</td>
			<td>Quantity: 1</td>
		</tr>
		<tr>
			<td>HeNe Laser</td>
			<td>Uniphase</td>
			<td>1108</td>
			<td>Class 2 | Quantity: 1</td>
		</tr>
		<tr>
			<td>High Tack Box Sealing Tape</td>
			<td>Scotch</td>
			<td>53344</td>
			<td>72 mm wide&#160;</td>
		</tr>
		<tr>
			<td>Laser Power Supply</td>
			<td>Uniphase</td>
			<td>1201-1</td>
			<td>115 V .12 A | Quantity: 1</td>
		</tr>
		<tr>
			<td>LM311 Comparator</td>
			<td>Digikey Electronics</td>
			<td>296-1389-5-ND</td>
			<td>Quantity: 1</td>
		</tr>
		<tr>
			<td>Mirror Mount</td>
			<td>THORLABS</td>
			<td>FMP05</td>
			<td>Fixed &#216;1/2&#34;, 8&#8211;32 Tap | Quantity: 1</td>
		</tr>
		<tr>
			<td>Moisture-Resistant Polyester Film</td>
			<td>McMaster-Carr</td>
			<td>8567K102</td>
			<td>10&#39; x 0.0005&#34; x 27&#34; | Quantity: 1</td>
		</tr>
		<tr>
			<td>Moisture-Resistant Polyester Film</td>
			<td>McMaster-Carr</td>
			<td>8567K12</td>
			<td>10&#39; x 0.001&#34; x 40&#34; | Quantity: 1</td>
		</tr>
		<tr>
			<td>Moisture-Resistant Polyester Film</td>
			<td>McMaster-Carr</td>
			<td>8567K22</td>
			<td>10&#39; x 0.002&#34; x 40&#34; | Quantity: 1</td>
		</tr>
		<tr>
			<td>Mourtise-Mount Hinge with Holes</td>
			<td>McMaster-Carr</td>
			<td>1598A52</td>
			<td>Size: 1&#34; x 1/2&#34; | Quantity: 4</td>
		</tr>
		<tr>
			<td>Needle Valve</td>
			<td>Robbins Aviation Inc</td>
			<td>INSG103-1P</td>
			<td>Quantity: 1</td>
		</tr>
		<tr>
			<td>Non-Polarizing Cube Beamsplitters</td>
			<td>THORLABS</td>
			<td>BS037</td>
			<td>Size: 10 mm | Quantity: 2</td>
		</tr>
		<tr>
			<td>Nonmetallic PVC Schedule 40</td>
			<td>Cantex</td>
			<td>A52BE12</td>
			<td>Quantity: 2.5 m&#160;</td>
		</tr>
		<tr>
			<td>Oatey PVC Cement and Primer</td>
			<td>PVC Fittings Online</td>
			<td>30246</td>
			<td>Quantity: 1</td>
		</tr>
		<tr>
			<td>Oil-Resistant Compressible Buna-N Gasket with Holes and Adhesive</td>
			<td>McMaster-Carr</td>
			<td>8516T454</td>
			<td>1-1/2 Pipe Size, ANSI 150, 1/16&#34; Thick | Quantity: 1</td>
		</tr>
		<tr>
			<td>Oscilliscope</td>
			<td>Tektronix</td>
			<td>TBS2102</td>
			<td>Quantity: 1</td>
		</tr>
		<tr>
			<td>Photoreceiver</td>
			<td>New Focus</td>
			<td>1801</td>
			<td>125-MHz | Quantity: 2</td>
		</tr>
		<tr>
			<td>Ping Pong Balls</td>
			<td>MAPOL</td>
			<td>FBA_MP-001</td>
			<td>Three Star</td>
		</tr>
		<tr>
			<td>Platform Mount for 10mm Beamsplitter and Right-Angle Prisms</td>
			<td>THORLABS</td>
			<td>BSH10</td>
			<td>4-40 Tap | Quantity: 1</td>
		</tr>
		<tr>
			<td>Proofgrade High Clarity Clear Acrylic</td>
			<td>Glowforge</td>
			<td>NA</td>
			<td>Thickness: 1/8&#34; | Quantity: 1</td>
		</tr>
		<tr>
			<td>Sch 80 PVC Cap</td>
			<td>PVC Fittings Online</td>
			<td>847-040</td>
			<td>Size: 4&#34; | Quantity: 1</td>
		</tr>
		<tr>
			<td>Sch 80 PVC Pipe</td>
			<td>PVC Fittings Online</td>
			<td>8008-040AB-5</td>
			<td>Quantity: 5 ft</td>
		</tr>
		<tr>
			<td>Sch 80 PVC Reducer Coupling</td>
			<td>PVC Fittings Online</td>
			<td>829-419</td>
			<td>Size: 4&#34; x 1-1/2&#34; | Quantity: 1</td>
		</tr>
		<tr>
			<td>Sch 80 PVC Slip Flange</td>
			<td>PVC Fittings Online</td>
			<td>851-015</td>
			<td>Size: 1 1/2&#34; | Quantity: 3</td>
		</tr>
		<tr>
			<td>Silicone Sealant Dow Corning</td>
			<td>McMaster-Carr</td>
			<td>7587A2</td>
			<td>3 oz. Tube, Clear | Quantity: 1</td>
		</tr>
		<tr>
			<td>Steel Corner Bracket</td>
			<td>McMaster-Carr</td>
			<td>1556A42</td>
			<td>Size: 1 1/2&#34; x 1 1/2&#34; x 1/2&#34; | Quantity: 16</td>
		</tr>
		<tr>
			<td>Vacuum Pump</td>
			<td>Mastercool</td>
			<td>&#160;MSC-90059-MD</td>
			<td>1 Stage, 1.5 CFM, 1/6HP, 115V/60HZ</td>
		</tr>
	</tbody>
</table>

high-speed optical diagnostics of a supersonic ping-pong cannon

Den traditionelle bordtenniskanon (PPC) er et uddannelsesapparat, der sender en bordtennisbold ned ad et evakueret rør til næsten soniske hastigheder ved hjælp af atmosfærisk tryk alene. SSPPC, en forstærket version af PPC, opnår supersoniske hastigheder ved at accelerere bolden med større end atmosfærisk tryk. Vi giver instruktioner til konstruktion og anvendelse af en optimeret PPC og SSPPC.
Optisk diagnostik implementeres med det formål at undersøge kanondynamikken. En HeNe laser, der sendes gennem to akrylvinduer nær udgangen af røret, afsluttes på en fotomodtagersensor. En mikroprocessor måler den tid, strålen blokeres af bordtennisbolden for automatisk at beregne boldens hastighed. Resultaterne præsenteres straks på et LCD-display. 
En optisk knivsægopsætning giver et meget følsomt middel til at detektere stødbølger ved at afskære en brøkdel af HeN-strålen ved sensoren. Chokbølger forårsager brydningsinducerede afbøjninger af strålen, som observeres som små spændingsspidser i det elektriske signal fra fotomodtageren. 
De præsenterede metoder er meget reproducerbare og giver mulighed for yderligere undersøgelser i laboratorieomgivelser.

Her giver vi instruktioner til konstruktion og anvendelse af en PPC og en SSPPC sammen med implementeringen af den optiske diagnostik til stødkarakterisering og hastighedsmålinger. Der gives også repræsentative eksperimentelle resultater. De færdige systemer i PPC og SSPPC sammen med nødvendigt tilbehør er vist i figur 1 og figur 2. SSPPC er en forstærket version af PPC, hvor en kørende, tryksat rørsektion er forbundet med PPC's drevne rør. Den optisk...

Watch this Scientific Journal Video about High-Speed Optical Diagnostics of a Supersonic Ping-Pong Cannon at JoVE.com

High-Speed Optical Diagnostics of a Supersonic Ping-Pong Cannon

Vi beskriver en metode til konstruktion af en supersonisk pingpongkanon (SSPPC) sammen med optiske diagnostiske teknikker til måling af kuglehastigheder og karakterisering af formerende chokbølger under affyring af kanonen.

Højhastigheds optisk diagnostik af en supersonisk bordtenniskanon

The traditional ping-pong cannon (PPC) is an educational apparatus that launches a ping-pong ball down an evacuated pipe to nearly sonic speeds using ...

Vi giver instruktioner til at konstruere og betjene en supersonisk bordtenniskanon sammen med optiske diagnostiske teknikker til måling af kuglehastigheder og detektering af chokbølger. Den optiske knivsægopsætning er meget følsom over for små, tværgående afbøjninger af en laserstråle og giver et middel til at detektere chokbølger forbundet med kanonen. Til at begynde med skal du tænde fotomodtagerne og lasermodulet ved at forbinde dem til en 15 volt strømbegrænset strømforsyning og laserstrømforsyning.Fastgør derefter fotomodtagerne til oscilloskopets to kanaler ved hjælp af BNC-kabler. Til optisk diagnostisk opsætning skal du placere laseren vinkelret på den fremstillede kanon med den første stråle, der krydser gennem akrylvinduerne inde i røret, og den anden lige uden for kanonudgangen. Placer sort elektrisk tape over halvdelen af fotomodtagersensoren, hvilket skaber en opsætning til registrering af stød på knivsæg.For at undgå klipning skal du justere strålepositionen på knivsæggen, så basisspændingen er ca. 50% af maksimum. Juster derefter indstillingerne på oscilloskopet for at indsamle 20 millioner datapunkter. Brug den vandrette skalaknap til at indstille dataindsamlingshastigheden til 500 megahertz.Drej udløserknappen for at udløse en spænding lidt under den indstillede baseline, der er erhvervet fra fotomodtageren. Før du affyrer PPC, skal du bære øre- og øjenbeskyttelse. Indsæt en bordtenniskugle i kanonens udgang og blæs let ind i enden af kanonen, indtil den rammer vakuumbeslaget nær rørindgangen.Forsegl kanonens udgangsflange og akrylhætte med to stykker firkantet tape. Sørg for, at laserstrålen er centreret på knivsæggen, aftrækkeren er korrekt placeret, og at fangstbeholderen er sikker. Tænd vakuumpumpen for at evakuere røret til et reduceret absolut tryk på mindre end to Torr.Når et tilstrækkeligt vakuum er nået, skal du bruge en bredhovedspids til at punktere båndet ved indgangen. Efter fyring skal du slukke for vakuumpumpen og fjerne eventuel resterende tape fra udgangsflangen og akrylhætten. For at affyre supersonisk PPC skal du lukke ventilen, der forbinder driverrøret til luftkompressoren, og fylde luftkompressortanken.Blæs bolden, som tidligere demonstreret. Efter forsegling af supersonisk PPC-udgangsflange skal du indsætte en tynd forskåret polyestermembran mellem to gummipakninger og placere dem mellem kanonens driver og drevne sektioner. Forbind de to sektioner ved hjælp af fire knastklemmer.Når trykket er reduceret i røret, frigøres trykket fra luftkompressoren ind i førerrøret, så trykket kan stige, indtil membranen brister, og trykluften i førerrøret fylder det evakuerede drevne rør. Efter supersonisk PPC-fyring skal du slukke for luftkompressoren og vakuumpumpen. Fjern den bristede polyestermembran og tape fra kanonen.Den formerende chokbølge, der afspejles gennem kanonaffyringsprocessen, var repræsenteret ved en ændring i spænding med hensyn til tid. En positiv eller negativ spids viser retningen af chokbølgen i signalet, og hastigheden blev beregnet gennem kvadratpulsbredden, produceret af kuglen, der afskærer strålen. En mikroprocessor blev brugt til at behandle signalet fra strålen, der krydser rørets indre for automatisk at beregne og vise kuglehastigheden nær kanonudgangen.Oscilloskopsporene demonstrerede dobbeltkanalaffyringen af den supersoniske PPC. Det øverste spor repræsenterer strålen, der krydser kanonens indre, nær udgangen. Mens det nederste spor svarer til strålen, der krydser bordtennisboldbanen efter at have forladt kanonen.Et afskæringssignal indikerede, at bolden passerede og blokerede hver stråle. Plottet af trykforskel versus Mach-tal afslørede, at 0,001 og 0,002 tommer tykke membraner brister ved tilstrækkelig trykforskel til at accelerere bordtennisbolden til supersonisk hastighed. Kuglehastigheden var konsekvent større end Mach 1.3 med en 0.002 tommer tyk membran.Den præsenterede supersoniske bordtenniskanon og den optiske diagnostik vil øge kanonens værdi, både som demonstrationsenhed og som apparat til opfølgende laboratorieforsøg.

high-speed-optical-diagnostics-of-a-supersonic-ping-pong-cannon

Research

Education

JoVE Core

JoVE Journal

Mechanical Engineering

Engineering

Unit 1

Kinematics of a Particle

SCIENTISTS IN ACTION

Construction and Testing of Coin Cells of Lithium Ion Batteries

Rechargeable lithium ion batteries have wide applications in electronics, where customers always demand more capacity and longer lifetime. Lithium ion batteries have also been considered to be used in electric and hybrid vehicles1 or even electrical grid stabilization systems2. All these applications simulate a dramatic increase in the research and development of battery materials3-7, including new materials3,8, doping9, nanostructuring10-13, coatings or surface modifications14-17 and novel binders18. Consequently, an increasing number of physicists, chemists and materials scientists have recently ventured into this area. Coin cells are widely used in research laboratories to test new battery materials; even for the research and development that target large-scale and high-power applications, small coin cells are often used to test the capacities and rate capabilities of new materials in the initial stage. 
 In 2010, we started a National Science Foundation (NSF) sponsored research project to investigate the surface adsorption and disordering in battery materials (grant no. DMR-1006515). In the initial stage of this project, we have struggled to learn the techniques of assembling and testing coin cells, which cannot be achieved without numerous help of other researchers in other universities (through frequent calls, email exchanges and two site visits). Thus, we feel that it is beneficial to document, by both text and video, a protocol of assembling and testing a coin cell, which will help other new researchers in this field. This effort represents the "Broader Impact" activities of our NSF project, and it will also help to educate and inspire students.
In this video article, we document a protocol to assemble a CR2032 coin cell with a LiCoO2 working electrode, a Li counter electrode, and (the mostly commonly used) polyvinylidene fluoride (PVDF) binder. To ensure new learners to readily repeat the protocol, we keep the protocol as specific and explicit as we can. However, it is important to note that in specific research and development work, many parameters adopted here can be varied. First, one can make coin cells of different sizes and test the working electrode against a counter electrode other than Li. Second, the amounts of C black and binder added into the working electrodes are often varied to suit the particular purpose of research; for example, large amounts of C black or even inert powder were added to the working electrode to test the "intrinsic" performance of cathode materials14. Third, better binders (other than PVDF) have also developed and used18. Finally, other types of electrolytes (instead of LiPF6) can also be used; in fact, certain high-voltage electrode materials will require the uses of special electrolytes7.

A protocol to construct and test coin cells of lithium ion batteries is described. The specific procedures of making a working electrode, preparing a counter electrode, assembling a cell inside a glovebox and testing the cell are presented.

Konstruktion og prøvning af Coin celler af lithium-ion batterier

Rechargeable lithium ion batteries have wide applications in electronics, where customers always demand more capacity and longer lifetime.  Lithium ion ...

Fabricating Metamaterials Using the Fiber Drawing Method

Metamaterials are man-made composite materials, fabricated by assembling components much smaller than the wavelength at which they operate 1. They owe their electromagnetic properties to the structure of their constituents, instead of the atoms that compose them. For example, sub-wavelength metal wires can be arranged to possess an effective electric permittivity that is either positive or negative at a given frequency, in contrast to the metals themselves 2. This unprecedented control over the behaviour of light can potentially lead to a number of novel devices, such as invisibility cloaks 3, negative refractive index materials 4, and lenses that resolve objects below the diffraction limit 5. However, metamaterials operating at optical, mid-infrared and terahertz frequencies are conventionally made using nano- and micro-fabrication techniques that are expensive and produce samples that are at most a few centimetres in size 6-7. Here we present a fabrication method to produce hundreds of meters of metal wire metamaterials in fiber form, which exhibit a terahertz plasmonic response 8. We combine the stack-and-draw technique used to produce microstructured polymer optical fiber 9 with the Taylor-wire process 10, using indium wires inside polymethylmethacrylate (PMMA) tubes. PMMA is chosen because it is an easy to handle, drawable dielectric with suitable optical properties in the terahertz region; indium because it has a melting temperature of 156.6 &deg;C which is appropriate for codrawing with PMMA. We include an indium wire of 1 mm diameter and 99.99% purity in a PMMA tube with 1 mm inner diameter (ID) and 12 mm outside diameter (OD) which is sealed at one end. The tube is evacuated and drawn down to an outer diameter of 1.2 mm. The resulting fiber is then cut into smaller pieces, and stacked into a larger PMMA tube. This stack is sealed at one end and fed into a furnace while being rapidly drawn, reducing the diameter of the structure by a factor of 10, and increasing the length by a factor of 100. Such fibers possess features on the micro- and nano- scale, are inherently flexible, mass-producible, and can be woven to exhibit electromagnetic properties that are not found in nature. They represent a promising platform for a number of novel devices from terahertz to optical frequencies, such as invisible fibers, woven negative refractive index cloths, and super-resolving lenses.

Metamaterials at terahertz frequencies offer unique opportunities, but are challenging to fabricate in bulk. We adapt the fabrication procedure for microstructured polymer optical fibers to inexpensively fabricate metamaterials potentially on an industrial scale. We produce polymethylmethacrylate fibers containing ~10 &mu;m diameter indium wires separated by ~100 &mu;m, which exhibit a terahertz plasmonic response.

Opdigte Metamaterialer Brug af Fiber Tegning Method

Metamaterials are man-made composite materials, fabricated by assembling components much smaller than the wavelength at which they operate 1. They owe ...

Optical Trapping of Nanoparticles

Optical trapping is a technique for immobilizing and manipulating small objects in a gentle way using light, and it has been widely applied in trapping and manipulating small biological particles. Ashkin and co-workers first demonstrated optical tweezers using a single focused beam1. The single beam trap can be described accurately using the perturbative gradient force formulation in the case of small Rayleigh regime particles1. In the perturbative regime, the optical power required for trapping a particle scales as the inverse fourth power of the particle size. High optical powers can damage dielectric particles and cause heating. For instance, trapped latex spheres of 109 nm in diameter were destroyed by a 15 mW beam in 25 sec1, which has serious implications for biological matter2,3.
A self-induced back-action (SIBA) optical trapping was proposed to trap 50 nm polystyrene spheres in the non-perturbative regime4. In a non-perturbative regime, even a small particle with little permittivity contrast to the background can influence significantly the ambient electromagnetic field and induce a large optical force. As a particle enters an illuminated aperture, light transmission increases dramatically because of dielectric loading. If the particle attempts to leave the aperture, decreased transmission causes a change in momentum outwards from the hole and, by Newton's Third Law, results in a force on the particle inwards into the hole, trapping the particle. The light transmission can be monitored; hence, the trap can become a sensor. The SIBA trapping technique can be further improved by using a double-nanohole structure.
The double-nanohole structure has been shown to give a strong local field enhancement5,6. Between the two sharp tips of the double-nanohole, a small particle can cause a large change in optical transmission, thereby inducing a large optical force. As a result, smaller nanoparticles can be trapped, such as 12 nm silicate spheres7 and 3.4 nm hydrodynamic radius bovine serum albumin proteins8. In this work, the experimental configuration used for nanoparticle trapping is outlined. First, we detail the assembly of the trapping setup which is based on a Thorlabs Optical Tweezer Kit. Next, we explain the nanofabrication procedure of the double-nanohole in a metal film, the fabrication of the microfluidic chamber and the sample preparation. Finally, we detail the data acquisition procedure and provide typical results for trapping 20 nm polystyrene nanospheres.

The following setup approach details low power optical trapping of dielectric nanoparticles using a double-nanohole in metal film.

Optisk diffusering af nanopartikler

Optical trapping is a technique for immobilizing and manipulating small objects in a gentle way using light, and it has been widely applied in trapping ...

High-resolution, High-speed, Three-dimensional Video Imaging with Digital Fringe Projection Techniques

Digital fringe projection (DFP) techniques provide dense 3D measurements of dynamically changing surfaces.&#160;Like the human eyes and brain, DFP uses triangulation between matching points in two views of the same scene at different angles to compute depth.&#160;However, unlike a stereo-based method, DFP uses a digital video projector to replace one of the cameras1. The projector rapidly projects a known sinusoidal pattern onto the subject, and the surface of the subject distorts these patterns in the camera&#8217;s field of view. Three distorted patterns (fringe images) from the camera can be used to compute the depth using triangulation.
Unlike other 3D measurement methods, DFP techniques lead to systems that tend to be faster, lower in equipment cost, more flexible, and easier to develop.&#160;DFP systems can also achieve the same measurement resolution as the camera.&#160;For this reason, DFP and other digital structured light techniques have recently been the focus of intense research (as summarized in1-5). Taking advantage of DFP, the graphics processing unit, and optimized algorithms, we have developed a system capable of 30&#160;Hz 3D video data acquisition, reconstruction, and display for over 300,000 measurement points per frame6,7.&#160;Binary defocusing DFP methods can achieve even greater speeds8.
Diverse applications can benefit from DFP techniques. Our collaborators have used our systems for facial function analysis9, facial animation10, cardiac mechanics studies11, and fluid surface measurements, but many other potential applications exist.&#160;This video will teach the fundamentals of DFP techniques and illustrate the design and operation of a binary defocusing DFP system.

This video describes the fundamentals of digital fringe projection techniques, which provide dense 3D measurements of dynamically changing surfaces.&#160;It also demonstrates the design and operation of a high-speed binary defocusing system based on these techniques.

Digital fringe projection (DFP) techniques provide dense 3D measurements of dynamically changing surfaces.&#160;Like the human eyes and brain, DFP uses ...

Construction of a High Resolution Microscope with Conventional and Holographic Optical Trapping Capabilities

High resolution microscope systems with optical traps allow for precise manipulation of various refractive objects, such as dielectric beads 1 or cellular organelles 2,3, as well as for high spatial and temporal resolution readout of their position relative to the center of the trap. The system described herein has one such "traditional" trap operating at 980 nm. It additionally provides a second optical trapping system that uses a commercially available holographic package to simultaneously create and manipulate complex trapping patterns in the field of view of the microscope 4,5 at a wavelength of 1,064 nm. The combination of the two systems allows for the manipulation of multiple refractive objects at the same time while simultaneously conducting high speed and high resolution measurements of motion and force production at nanometer and piconewton scale.

The system described herein employs a traditional optical trap as well as an independent holographic optical trapping line, capable of creating and manipulating multiple traps. This allows for the creation of complex geometric arrangements of refractive particles while also permitting simultaneous high-speed, high-resolution measurements of the activity of biological enzymes.

Opførelse af en høj opløsning Mikroskop med konventionelle og Holografisk Optiske fældefangst Capabilities

High resolution microscope systems with optical traps allow for precise manipulation of various refractive objects, such as dielectric beads 1 or cellular ...

High-speed Particle Image Velocimetry Near Surfaces

Multi-dimensional and transient flows play a key role in many areas of science, engineering, and health sciences but are often not well understood. The complex nature of these flows may be studied using particle image velocimetry (PIV), a laser-based imaging technique for optically accessible flows. Though many forms of PIV exist that extend the technique beyond the original planar two-component velocity measurement capabilities, the basic PIV system consists of a light source (laser), a camera, tracer particles, and analysis algorithms. The imaging and recording parameters, the light source, and the algorithms are adjusted to optimize the recording for the flow of interest and obtain valid velocity data. 
Common PIV investigations measure two-component velocities in a plane at a few frames per second. However, recent developments in instrumentation have facilitated high-frame rate (&gt; 1 kHz) measurements capable of resolving transient flows with high temporal resolution. Therefore, high-frame rate measurements have enabled investigations on the evolution of the structure and dynamics of highly transient flows. These investigations play a critical role in understanding the fundamental physics of complex flows.
A detailed description for performing high-resolution, high-speed planar PIV to study a transient flow near the surface of a flat plate is presented here. Details for adjusting the parameter constraints such as image and recording properties, the laser sheet properties, and processing algorithms to adapt PIV for any flow of interest are included.

A procedure for studying transient flows near boundaries using high-resolution, high-speed particle image velocimetry (PIV) is described here. PIV is a non-intrusive measurement technique applicable to any optically accessible flow by optimizing several parameter constraints such as the image and recording properties, the laser sheet properties, and analysis algorithms.

High-speed Particle Billede Velocimetri nærheden Surfaces

Multi-dimensional and transient flows play a key role in many areas of science, engineering, and health sciences but are often not well understood. The ...

Visualization of High Speed Liquid Jet Impaction on a Moving Surface

Two apparatuses for examining liquid jet impingement on a high-speed moving surface are described: an air cannon device (for examining surface speeds between 0 and 25 m/sec) and a spinning disk device (for examining surface speeds between 15 and 100 m/sec). The air cannon linear traverse is a pneumatic energy-powered system that is designed to accelerate a metal rail surface mounted on top of a wooden projectile. A pressurized cylinder fitted with a solenoid valve rapidly releases pressurized air into the barrel, forcing the projectile down the cannon barrel. The projectile travels beneath a spray nozzle, which impinges a liquid jet onto its metal upper surface, and the projectile then hits a stopping mechanism. A camera records the jet impingement, and a pressure transducer records the spray nozzle backpressure. The spinning disk set-up consists of a steel disk that reaches speeds of 500 to 3,000 rpm via a variable frequency drive (VFD) motor. A spray system similar to that of the air cannon generates a liquid jet that impinges onto the spinning disc, and cameras placed at several optical access points record the jet impingement. Video recordings of jet impingement processes are recorded and examined to determine whether the outcome of impingement is splash, splatter, or deposition. The apparatuses are the first that involve the high speed impingement of low-Reynolds-number liquid jets on high speed moving surfaces. In addition to its rail industry applications, the described technique may be used for technical and industrial purposes such as steelmaking and may be relevant to high-speed 3D printing.

Two experimental devices for examining liquid jet impingement on a high-speed moving surface are described: an air cannon device and a spinning disk device. The apparatuses are used to determine optimal approaches to the application of liquid friction modifier (LFM) onto rail tracks for top-of-rail friction control.

Visualisering af High Speed ​​Liquid Jet Impaction på en bevægende Surface

Two apparatuses for examining liquid jet impingement on a high-speed moving surface are described: an air cannon device (for examining surface speeds ...

Fabrication and Operation of a Nano-Optical Conveyor Belt

The technique of using focused laser beams to trap and exert forces on small particles has enabled many pivotal discoveries in the nanoscale biological and physical sciences over the past few decades. The progress made in this field invites further study of even smaller systems and at a larger scale, with tools that could be distributed more easily and made more widely available. Unfortunately, the fundamental laws of diffraction limit the minimum size of the focal spot of a laser beam, which makes particles smaller than a half-wavelength in diameter hard to trap and generally prevents an operator from discriminating between particles which are closer together than one half-wavelength. This precludes the optical manipulation of many closely-spaced nanoparticles and&#160;limits the&#160;resolution of optical-mechanical systems. Furthermore, manipulation using focused beams requires beam-forming or steering optics, which can be very bulky and expensive. To address these limitations in the system scalability of conventional optical trapping our lab has devised an alternative technique which utilizes near-field optics to move particles across a chip. Instead of focusing laser beams in the far-field, the optical near field of plasmonic resonators produces the necessary local optical intensity enhancement to overcome the restrictions of diffraction and manipulate particles at higher resolution. Closely-spaced resonators produce strong optical traps which can be addressed to mediate the hand-off of particles from one to the next in a conveyor-belt-like fashion. Here, we describe how to design and produce a conveyor belt using a gold surface patterned with plasmonic C-shaped resonators and how to operate it with polarized laser light to achieve super-resolution nanoparticle manipulation and transport. The nano-optical conveyor belt chip can be produced using lithography techniques and easily packaged and distributed.

The scalability and resolution of conventional optical manipulation techniques are limited by diffraction. We circumvent the diffraction limit and describe a method of optically transporting nanoparticles across a chip using a gold surface patterned with a path of closely spaced C-shaped plasmonic resonators.

Fabrikation og Drift af et Nano-Optical transportbånd

The technique of using focused laser beams to trap and exert forces on small particles has enabled many pivotal discoveries in the nanoscale biological ...

Writing Bragg Gratings in Multicore Fibers

Fiber Bragg gratings in multicore fibers can be used as compact and robust filters in astronomical and other research and commercial applications. Strong suppression at a single wavelength requires that all cores have matching transmission profiles. These gratings cannot be inscribed using the same method as for single-core fibers because the curved surface of the cladding acts as a lens, focusing the incoming UV laser beam and causing variations in exposure between cores. Therefore we use an additional optical element to ensure that the beam shape does not change while passing through the cross-section of the multicore fiber. This consists of a glass capillary tube which has been polished flat on one side, which is then placed over the section of the fiber to be inscribed. The laser beam enters the fiber through the flat surface of the capillary tube and hence maintains its original dimensions. This paper demonstrates the improvements in core-to-core uniformity for a 7-core fiber using this method. The technique can be generalized to larger multicore fibers.

We describe a technique for inscribing identical fiber Bragg gratings into each core of a multicore fiber. This is achieved by introducing an additional surface into the optical path to mitigate lensing by the curved surface of the fiber cladding.

Skrivning Bragg Riste i Multicore Fibers

Fiber Bragg gratings in multicore fibers can be used as compact and robust filters in astronomical and other research and commercial applications. Strong ...

Compact Lens-less Digital Holographic Microscope for MEMS Inspection and Characterization

A micro-electro-mechanical-system (MEMS) is a widely used component in many industries, including energy, biotechnology, medical, communications, and automotive. However, effective inspection and characterization metrology systems are needed to ensure the functional reliability of MEMS. This study presents a system based on digital holography as a tool for MEMS metrology. Digital holography has gained increasing attention in the past 20 years. With the fast development and decreasing cost of sensor arrays, resolution of such systems has increased broadening potential applications. Thus, it has attracted attention from both research and industry sides as a potential reliable tool for industrial metrology. Indeed, by recording the interference pattern between an object beam (which contains sample height information) and a reference beam on a CCD camera, one can retrieve the quantitative phase information of an object. However, most of digital holographic systems are bulky and thus not easy to implement on industry production lines. The novelty of the system presented is that it is lens-less and thus very compact. In this study, it is shown that the Compact Digital Holographic Microscope (CDHM) can be used to evaluate several characteristics typically consider as criteria in MEMS inspections. The surface profiles of MEMS in both static and dynamic conditions are presented. Comparison with AFM is investigated to validate the accuracy of the CDHM.

We present a compact reflection digital holographic system (CDHM) for inspection and characterization of MEMS devices. A lens-less design using a diverging input wave providing natural geometrical magnification is demonstrated. Both static and dynamic studies are presented.

Kompakt Lens-mindre Digital Holografisk Microscope for MEMS Inspektion og karakterisering

A micro-electro-mechanical-system (MEMS) is a widely used component in many industries, including energy, biotechnology, medical, communications, and ...