measurement-rheology-crude-oil-equilibrium-with-co2-at-reservoir

Measurement of the Rheology of Crude Oil in Equilibrium with CO<sub>2</sub> at Reservoir Conditions

A rheometer system to measure the rheology of crude oil in equilibrium with carbon dioxide (CO2) at high temperatures and pressures is described. The ...

Imperial College London, Qatar Carbonate and Carbon Storage Research Centre

This paper explores the correlation between different microstructural characteristics of porous sedimentary rocks and the flow properties of a Newtonian infiltrating fluid. Preliminary results of displacement propagator measurements of brine solution flowing through two types of sedimentary rock cores are reported. The two types of rocks, Bentheimer and Portland, are characterized by different porosities, pore-size distributions and permeabilities. Propagators have been measured for brine flow rates of 1 and 5 ml/min. Significant differences are seen between the propagators recorded for the two rocks, and these are related to the spatial distribution of porosity within these porous media.

Displacement propagators of brine flowing within different types of sedimentary rock.

Confocal laser scanning microscopy has been used to obtain 3D optical image stacks of packings of glass ballotini in various fluorescent dye-containing fluids inside a 3D micromodel. The fluids' refractive index was matched to that of the glass ballotini so that clear images at an appreciable depth (approximately 400 microm) inside the packings were obtained. The lattice Boltzmann method was then used to produce 3D velocity fields through the 3D image stacks of the packed ballotini. These have been used in conjunction with a stochastic random-walk algorithm to produce simulated displacement propagators, which have been shown to be in qualitative agreement with experimental propagators, obtained using nuclear magnetic resonance, of water flowing through the exact same micromodel.

A comparison of experimental and simulated propagators in porous media using confocal laser scanning microscopy, lattice Boltzmann hydrodynamic simulations and nuclear magnetic resonance.

The in situ rheology of polymeric solutions has been studied experimentally in etched silicon micromodels which are idealizations of porous media. The rectangular channels in these etched networks have dimensions typical of pore sizes in sandstone rocks. Pressure drop/flow rate relations have been measured for water and non-Newtonian hydrolyzed-polyacrylamide (HPAM) solutions in both individual straight rectangular capillaries and in networks of such capillaries. Results from these experiments have been analyzed using pore-scale network modeling incorporating the non-Newtonian fluid mechanics of a Carreau fluid. Quantitative agreement is seen between the experiments and the network calculations in the Newtonian and shear-thinning flow regions demonstrating that the 'shift factor,'alpha, can be calculated a priori. Shear-thickening behavior was observed at higher flow rates in the micromodel experiments as a result of elastic effects becoming important and this remains to be incorporated in the network model.

Experimental and modeling study of Newtonian and non-Newtonian fluid flow in pore network micromodels.

We use displacement encoding pulsed field gradient (PFG) nuclear magnetic resonance to measure Fourier components S(q) of flow displacement distributions P(zeta) with mean displacement (zeta) for Newtonian and non-Newtonian flows through rocks and bead packs. Displacement distributions are non-Gaussian; hence, there are finite terms above second order in the cumulant expansion of ln(S(q)). We describe an algorithm for an optimal self-consistent cumulant analysis of data, which can be used to obtain the first three (central) moments of a non-Gaussian P(zeta), with error bars. The analysis is applied to Newtonian and non-Newtonian flows in rocks and beads. Flow with shear-thinning xanthan solution produces a 15.6+/-2.3% enhancement of the variance sigma(2) of displacement distributions when compared to flow experiments with water.

A cumulant analysis for non-Gaussian displacement distributions in Newtonian and non-Newtonian flows through porous media.

The aim of this paper is to inform College Fellows, trainees and other stakeholders about the structure, principles and functioning of the new Board of Education.

An outline of the planned work of the Royal Australian and New Zealand College of Psychiatrists' Board of Education.

The spontaneous imbibition of liquid in nanopores of different roughness is investigated using coarse grain molecular dynamics (MD) simulation. The numerical model is presented and the simplifying assumptions are discussed in detail. The molecular-kinetic theory introduced by Blake is used to describe the effect of dynamic contact angle on fluid imbibition. The capillary roughness is modeled using a random distribution of coarse grained particles forming the wall. The Lucas-Washburn equation is used as a reference for analyzing the imbibition curves obtained by simulation. Due to the statistical nature of MD processing, a comprehensive approach was made to average and smooth the data to accurately define a contact angle. The results are discussed in terms of effective hydrodynamic and static capillary radii and their difference as a function of roughness and wettability.

Spontaneous imbibition in nanopores of different roughness and wettability.

We report experimental measurements of the dissolution rate of several carbonate minerals in CO2-saturated water or brine at temperatures between 323 K and 373 K and at pressures up to 15 MPa. The dissolution kinetics of pure calcite were studied in CO2-saturated NaCl brines with molalities of up to 5 mol kg(-1). The results of these experiments were found to depend only weakly on the brine molality and to conform reasonably well with a kinetic model involving two parallel first-order reactions: one involving reactions with protons and the other involving reaction with carbonic acid. The dissolution rates of dolomite and magnesite were studied in both aqueous HCl solution and in CO2-saturated water. For these minerals, the dissolution rates could be explained by a simpler kinetic model involving only direct reaction between protons and the mineral surface. Finally, the rates of dissolution of two carbonate-reservoir analogue minerals (Ketton limestone and North-Sea chalk) in CO2-saturated water were found to follow the same kinetics as found for pure calcite. Vertical scanning interferometry was used to study the surface morphology of unreacted and reacted samples. The results of the present study may find application in reactive-flow simulations of CO2-injection into carbonate-mineral saline aquifers.

John Crawshaw

Chemical Engineering Department

Imperial College London, Qatar Carbonate and Carbon Storage Research Centre

Measurement of the Rheology of Crude Oil in Equilibrium with CO₂ at Reservoir Conditions

John Crawshaw

Chemical Engineering Department

Imperial College London, Qatar Carbonate and Carbon Storage Research Centre

Measurement of the Rheology of Crude Oil in Equilibrium with CO2 at Reservoir Conditions

Measurement of the Rheology of Crude Oil in Equilibrium with CO₂ at Reservoir Conditions