experimental-investigation-hierarchical-control-dc-microgrids-using

Experimental Investigation of the Hierarchical Control in DC Microgrids Using a Real-time Simulator

The rise of renewable energy sources has underscored the significance of microgrids, particularly DC variants, which are well-suited for integrating ...

wuhan university

The monitoring and control of DC-DC converters have become key issues since DC-DC converters are gradually playing increasingly crucial roles in power electronics applications such as electric vehicles and renewable energy systems. As an emerging and transforming technology, the digital twin, which is a dynamic virtual replica of a physical system, can potentially provide solutions for the monitoring and control of DC-DC converters. This work discusses the design and implementation of the digital twin DC-DC converter in detail. The key features of the physical and twin systems are outlined, and the control architecture is provided. To verify the effectiveness of the proposed digital twin method, four possible cases that may occur during the practical control scenarios of DC-DC converter applications are discussed. Simulations and experimental verification are conducted, showing that the digital twin can dynamically track the physical DC-DC converter, detect the failure of the physical controller and replace it in real time.

Digital twin based monitoring and control for DC-DC converters.

In today's cyber-physical microgrid systems, the consensus-based secondary control is generally utilized to settle the voltage deviation and rough current allocation issues at the primary control level. However, time delays follow inevitably the introduction of sparse communication networks, and most existing works adopt passive tolerance approaches. To actively alleviate the unavoidable delay effect in microgrids' communication networks, a networked predictive control (NPC) strategy is proposed for an islanded DC microgrid subject to time delays in this paper. Firstly, the predictive approaches for both voltage and current are developed based on the cyber-physical microgrid model. Unlike the practice of passively tolerating time delays, the NPC strategy is proposed to actively compensate for the effect of communication delays by estimating real-time voltage and current values using the previously obtained prediction models. Moreover, to prove the generality of the developed method, the microgrid systems' stability can be derived from the Schur stability of the closed-loop system, thus the DC microgrid can achieve voltage regulation and proportional current sharing simultaneously. Finally, the performance of our method against the time delay effect is validated by extensive experiments on an islanded 48-V DC microgrid system, in terms of its feasibility, delay tolerance ability, and robustness to load changes and communication faults. Experimental results demonstrate the effectiveness and superiority of the NPC strategy.

Xiaoran Dai

School of Electrical Engineering and Automation

wuhan university

Experimental Investigation of the Hierarchical Control in DC Microgrids Using a Real-time Simulator

Xiaoran Dai

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}School of Electrical Engineering and Automation

wuhan university

Experimental Investigation of the Hierarchical Control in DC Microgrids Using a Real-time Simulator

School of Electrical Engineering and Automation