Fabrication of a Dipole-assisted Solid Phase Extraction Microchip for Trace Metal Analysis in Water Samples

This paper describes a fabrication protocol for a dipole-assisted solid phase extraction (SPE) microchip available for trace metal analysis in water ...

Industrial Technology Research Institute

We have combined short-column ion chromatographic separation and on-line photocatalyst-assisted vapor generation (VG) techniques with inductively coupled plasma mass spectrometry to develop a simple and sensitive hyphenated method for the determination of aqueous Hg(2+) and MeHg(+) species. The separation of Hg(2+) and MeHg(+) was accomplished on a cation-exchange guard column using a glutathione (GSH)-containing eluent. To achieve optimal chromatographic separation and signal intensities, we investigated the influence of several of the operating parameters of the chromatographic and photocatalyst-assisted VG systems. Under the optimized conditions of VG process, the shortcomings of conventional SnCl(2)-based VG techniques for the vaporization of MeHg(+) was overcome; comparing to the concentric nebulizer-ICP-MS system, the analytical sensitivity of ICP-MS toward the detection of Hg(2+) and MeHg(+) were also improved to 25- and 7-fold, respectively. With the use of our established HPLC-UV/nano-TiO(2)-ICP-MS system, the precision for each analyte, based on three replicate injections of 2 ng/mL samples of each species, was better than 15% RSD. This hyphenated method also provided excellent detection limits--0.1 and 0.03 ng/mL for Hg(2+) and MeHg(+), respectively. A series of validation experiments--analysis of the NIST 2672a Standard Urine Reference Material and other urine samples--confirmed further that our proposed method could be applied satisfactorily to the determination of inorganic Hg(2+) and MeHg(+) species in real samples.

Determination of methylmercury and inorganic mercury by coupling short-column ion chromatographic separation, on-line photocatalyst-assisted vapor generation, and inductively coupled plasma mass spectrometry.

Understanding the properties that determine the distribution and behavior of trace impurities in Si wafers is critical to defining and controlling the performance, reliability, and yields of integrated microelectronic devices. It remains, however, an intrinsically difficult task to determine trace impurities in Si because of the minute concentrations and extremely high levels of matrix involved. In this study, we used an electrodialyzer for the simultaneous on-line removal of the silicate and acid matrices through the neutralization of the excessive hydrogen ion and selectively separation of acid and silicate ions by the combination of electrode reaction as a source of hydroxide ions with the anion exchange membrane separation. To retain the analyte ions in the sample stream, we found that the presence of moderate amounts of nitric acid and hydrazine were necessary to improve the retention efficiency, not only for Zn(2+), Ni(2+), Cu(2+), and Co(2+) ions but also for CrO(4)(2-) ion. Under the optimized conditions, the interference that resulted from the sample matrix was suppressed significantly to provide satisfactory analytical signals. The precision of this method was ca. 5% when we used an electrodialyzer equipped with an anion exchange membrane to remove the sample matrix prior to performing inductively coupled plasma mass spectrometry (ICP-MS); the good agreement between the data obtained using our proposed method and those obtained using a batchwise wet chemical technique confirmed its accuracy. Our method permits the determination of Zn, Ni, Cu, Co, and Cr in Si wafers at detection limits within the range from 2.2 x 10(15) to 9.0 x 10(15) atoms cm(-3).

Coupling of an electrodialyzer with inductively coupled plasma mass spectrometry for the on-line determination of trace impurities in silicon wafers after surface metal extraction.

We have developed a sensitive gold nanoparticle (AuNP)-based inductively coupled plasma mass spectrometry (ICP-MS) amplification and magnetic separation method for the detection of oligonucleotide sequences. The assay relies on (i) the sandwich-type binding of two designed probe sequences that specifically recognize the target oligonucleotide sequences, (ii) magnetic bead separation, and (iii) AuNP-based ICP-MS amplification detection. To enhance the analytical signal and minimize the background signal resulting from nonspecific binding, we performed a series of experiments to evaluate the effects of various parameters (the concentration of the capture probe; the time required for hybridization; the number of washings required to eliminate nonspecific binding) on the oligonucleotide detection. Under the optimized conditions, the detection limit was 80zmol (corresponding to 1.6fM of the target sequence in a sample volume of 50μL). Moreover, it employs a shorter hybridization step and ICP-MS, this procedure is relatively simple and rapid (ca. 1.5h). Based on the analytical results obtained using complementary and mismatched sequences, our method exhibits good performance in distinguishing complementary and random oligonucleotides. Compared with the "gold standard" methodology (plaque assay) for the quantification of dengue virus, our method has the capability to allow early detection of dengue virus in complicated and small-volume samples, with high specificity, good analytical sensitivity, and superior time-effectiveness.

Gold nanoparticle-based inductively coupled plasma mass spectrometry amplification and magnetic separation for the sensitive detection of a virus-specific RNA sequence.

We have developed a sensitive gold-nanoparticle-based (AuNP-based) graphite furnace atomic absorption spectrometry (GFAAS) amplification and magnetic separation method for the detection of mercuric ions (Hg²⁺). The assay relies on (i) a sandwich-type structure containing two thymine-thymine (T-T) mismatches for selectively recognizing Hg²⁺ ions; (ii) magnetic beads for homogeneous separation; and (iii) AuNP-based GFAAS amplification detection. The limit of detection (LOD) of this assay is 0.45 nM (0.09 μg L⁻¹)--one order of magnitude lower than the United States Environmental Protection Agency (US EPA) limit for Hg²⁺ in drinking water. Furthermore, because a shorter hybridization step and a simpler AuNP-based GFAAS amplification detection were employed, a faster analytical run time allowing us to analyze a batch of 24 samples within 0.5 h. We demonstrated the feasibility of the developed approach for the determination of Hg²⁺ in urine and aqueous environmental samples.

Gold-nanoparticle-based graphite furnace atomic absorption spectrometry amplification and magnetic separation method for sensitive detection of mercuric ions.

A facile method for accurate detection of type 1 dengue virus (DV1) infection from complex biological mixtures, using type specific immunocapture coupled with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS), was developed. The biological mixtures were treated with magnetic particles coated with a monoclonal antibody directly against type 1 dengue virus. After immunocapture purification, the DV1 was eluted with 30% acetic acid, directly spotted with seed-layer method, and analyzed by MALDI-TOF MS for DV1 capsid protein. The detection limit of the assay was ∼10(5)pfu/mL by MALDI-TOF MS. The immunocapture could unambiguously differentiate the DV1 from other serotypes of the dengue viruses and Japanese encephalitis virus, and could be used as a specific probe to detect DV1 from complex biological mixtures.

Immunocapture couples with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry for rapid detection of type 1 dengue virus.

In this study, a poly(methyl methacrylate) chip-based photocatalyst-assisted reduction device (PMMA chip-based PCARD) was developed as a reactor based on its excellent optical properties and ease of fabrication. Its transmittance of ultraviolet light at 365nm (UV365) was found to be as high as 92% using a PMMA of 2mm thickness. To optimize the vaporization efficiency, the effect of varying the depth of the geometry trenched on the PMMA-based chip was investigated. After optimization, it required only 29s of UV365 irradiation to vaporize the selenium (Se) species of interest. The PMMA-based chip was successfully used as an interfacing device for the hyphenation of high performance liquid chromatography (HPLC) separation and inductively coupled plasma-mass spectrometry (ICP-MS) detection. Additionally, under the optimized conditions for vaporization, using 1gL(-1) titanium dioxide nanoparticles (nano-TiO2) at pH 5, we found that Se(IV) and Se(VI) were converted quantitatively into volatile Se products. In addition, the optimized vaporization efficiency of the Se species of interest for the online HPLC/PMMA chip-based PCARD/ICP-MS system enabled us to achieve detection limits for Se(IV) and Se(VI) in the nanogram-per-liter range (based on 3σ). A series of validation experiments indicated that our proposed methods could be applied satisfactorily to the determination of inorganic Se species in environmental water samples.

Development of chip-based photocatalyst-assisted reduction device to couple high performance liquid chromatography and inductively coupled plasma-mass spectrometry for determination of inorganic selenium species.

We developed a selective and sensitive hyphenated system employing a microfluidic-based vapor generation (VG) system in conjunction with high-performance liquid chromatography (HPLC) separation and inductively coupled plasma-mass spectrometry (ICPMS) detection for the determination of trace inorganic selenium (Se) species. The VG system exploited poly(methyl methacrylate) (PMMA) substrates of high optical quality to fabricate a microfluidic-based photocatalyst-assisted reduction device (microfluidic-based PCARD). Moreover, to reduce the consumption of photocatalysts during analytical procedures, a microfluidic-based PCARD coated with titanium dioxide nanoparticles (nano-TiO2) was employed to avoid consecutive loading. Notably, to simplify the coating procedure and improve the stability of the coating materials, a dynamic coating method was utilized. Under the optimized conditions for the selenicals of interest, the online HPLC/TiO2-coated microfluidic-based PCARD/ICPMS system enabled us to achieve detection limits (based on 3σ) of 0.043 and 0.042 μg L(-1) for Se(IV) and Se(VI), respectively. Both Se(IV) and Se(VI) could be efficiently vaporized within 15 s, while a series of validation experiments indicated that our proposed method could be satisfactorily applied to the determination of inorganic Se species in the environmental water samples.

Development of a titanium dioxide-coated microfluidic-based photocatalyst-assisted reduction device to couple high-performance liquid chromatography with inductively coupled plasma-mass spectrometry for determination of inorganic selenium species.

We have developed an on-line sequential photocatalyst-assisted digestion and vaporization device (SPADVD), which operates through the nano-TiO2-catalyzed photo-oxidation and reduction of selenium (Se) species, for coupling between anion exchange chromatography (LC) and inductively coupled plasma mass spectrometry (ICP-MS) systems to provide a simple and sensitive hyphenated method for the speciation analysis of Se species without the need for conventional chemical digestion and vaporization techniques. Because our proposed on-line SPADVD allows both organic and inorganic Se species in the column effluent to be converted on-line into volatile Se products, which are then measured directly through ICP-MS, the complexity of the procedure and the probability of contamination arising from the use of additional chemicals are both low. Under the optimized conditions for SPADVD - using 1g of nano-TiO2 per liter, at pH 3, and illuminating for 80 s - we found that Se(IV), Se(VI), and selenomethionine (SeMet) were all converted quantitatively into volatile Se products. In addition, because the digestion and vaporization efficiencies of all the tested selenicals were improved when using our proposed on-line LC/SPADVD/ICP-MS system, the detection limits for Se(IV), Se(VI), and SeMet were all in the nanogram-per-liter range (based on 3σ). A series of validation experiments - analysis of neat and spiked extracted samples - indicated that our proposed methods could be applied satisfactorily to the speciation analysis of organic and inorganic Se species in the extracts of Se-enriched supplements.

Sequential photocatalyst-assisted digestion and vapor generation device coupled with anion exchange chromatography and inductively coupled plasma mass spectrometry for speciation analysis of selenium species in biological samples.

We employed a polymeric material, poly(methyl methacrylate) (PMMA), for fabricating a microdevice and then implanted the chlorine (Cl)-containing solid-phase extraction (SPE) functionality into the PMMA chip to develop an innovative on-chip dipole-assisted SPE technique. Instead of the ion-ion interactions utilized in on-chip SPE techniques, the dipole-ion interactions between the highly electronegative C-Cl moieties in the channel interior and the positively charged metal ions were employed to facilitate the on-chip SPE procedures. Furthermore, to avoid labor-intensive manual manipulation, a programmable valve manifold was designed as an interface combining the dipole-assisted SPE microchip and inductively coupled plasma-mass spectrometry (ICP-MS) to achieve the fully automated operation. Under the optimized operation conditions for the established system, the detection limits for each analyte ion were obtained based on three times the standard deviation of seven measurements of the blank eluent solution. The limits ranged from 3.48 to 20.68 ng L(-1), suggesting that this technique appears uniquely suited for determining the levels of heavy metal ions in natural water. Indeed, a series of validation procedures demonstrated that the developed method could be satisfactorily applied to the determination of trace heavy metals in natural water. Remarkably, the developed device was durable enough to be reused more than 160 times without any loss in its analytical performance. To the best of our knowledge, this is the first study reporting on the combination of a dipole-assisted SPE microchip and elemental analysis instrument for the online determination of trace heavy metal ions.

A dipole-assisted solid-phase extraction microchip combined with inductively coupled plasma-mass spectrometry for online determination of trace heavy metals in natural water.

I-Hsiang Hsu

Center for Measurement Standards

Industrial Technology Research Institute

Fabrication of a Dipole-assisted Solid Phase Extraction Microchip for Trace Metal Analysis in Water Samples

I-Hsiang Hsu

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}Center for Measurement Standards

Industrial Technology Research Institute

Fabrication of a Dipole-assisted Solid Phase Extraction Microchip for Trace Metal Analysis in Water Samples

Center for Measurement Standards