Soil Lysimeter Excavation for Coupled Hydrological, Geochemical, and Microbiological Investigations

Studying co-evolution of hydrological and biogeochemical processes in the subsurface of natural landscapes can enhance the understanding of coupled ...

University of Arizona

Low-order detonations and blow-in-place procedures on military training ranges can result in residual solid explosive formulations to serve as distributed point sources for ground water contamination. This study was conducted to determine if distribution coefficients from batch studies and transport parameters of pure compounds in solution adequately describe explosive transport where compounds are present as solid particles in formulations. Saturated column transport experiments were conducted with 2,4,6-trinitrotoluene (TNT), hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX), and the explosive formulation, Composition B (Comp B) (59.5 +/- 2.0% RDX, 39.5 +/- 2.3% TNT, and 1% wax) in solid and dissolved forms. The two soils used were Plymouth loamy sand (mesic, coated Typic Quartzipsamments) from Camp Edwards, MA and Adler silt loam (coarse-silty, mixed, superactive, thermic Fluvaquentic Eutrudepts) from Vicksburg, MS. Interrupted flow experiments were used to determine if explosives were at equilibrium distribution between soil and solution phases. The HYDRUS-1D code was used to determine fate and transport parameters. Results indicated that sorption of high explosives was rate limited. The behavior of dissolved Comp B was similar to the behavior of pure TNT and RDX. Behavior of solid Comp B was controlled by dissolution that depended on physical properties of the Comp B sample. Adsorption coefficients determined by HYDRUS-1D were different from those determined in batch tests for the same soils. Use of parameters specific to formulations will improve fate and transport predictions.

Dissolution and transport of TNT, RDX, and composition B in saturated soil columns.

Soil humic substances (HS) stabilize carbon nanotube (CNT) dispersions, a mechanism we hypothesized arose from the surfactive nature of HS. Experiments dispersing multi-walled CNT in solutions of dissolved Aldrich humic acid (HA) or water-extractable Catlin soil HS demonstrated enhanced stability at 150 and 300 mg L(-1) added Aldrich HA and Catlin HS, respectively, corresponding with decreased CNT mean particle diameter (MPD) and polydispersivity (PD) of 250 nm and 0.3 for Aldrich HA and 450 nm and 0.35 for Catlin HS. Analogous trends in MPD and PD were observed with addition of the surfactants Brij 35, Triton X-405, and SDS, corresponding to surfactant sorption maximum. NEXAFS characterization showed that Aldrich HA contained highly surfactive domains while Catlin soil possessed a mostly carbohydrate-based structure. This work demonstrates that the chemical structure of humic materials in natural waters is directly linked to their surfactive ability to disperse CNT released into the environment.

Surfactive stabilization of multi-walled carbon nanotube dispersions with dissolved humic substances.

Carbon nanotubes (NTs) may be among the most useful engineered nanomaterials for structural applications but could be difficult to study in ecotoxicological evaluations using existing tools relative to nanomaterials with a lower aspect ratio. Whereas the hydrophobicity and van der Waals interactions of NTs may suggest aggregation and sedimentation in aquatic systems, consideration regarding how engineered surface modifications influence their environmental fate and toxicology is needed. Surface modifications (e.g., functional groups and coatings) are intended to create conditions to make NTs dispersible in aqueous suspension, as required for some applications. In the present study, column stability and settling experiments indicated that raw, multiwalled NTs (MWNTs) settled more rapidly than carbon black and activated carbon particles, suggesting sediment as the ultimate repository. The presence of functional groups, however, slowed the settling of MWNTs (increasing order of stability: hydroxyl > carboxyl > raw), especially in combination with natural organic matter (NOM). Stabilized MWNTs in high concentrations of NOM provided relevance for water transport and toxicity studies. Aqueous exposures to raw MWNTs decreased Ceriodaphnia dubia viability, but such effects were not observed during exposure to functionalized MWNTs (> 80 mg/L). Sediment exposures of the amphipods Leptocheirus plumulosus and Hyalella azteca to different sizes of sediment-borne carbon particles at high concentration indicated mortality increased as particle size decreased, although raw MWNTs induced lower mortality (median lethal concentration [LC50], 50 to >264 g/kg) than carbon black (LC50, 18-40 g/kg) and activated carbon (LC50, 12-29 g/kg). Our findings stress that it may be inappropriate to classify all NTs into one category in terms of their environmental regulation.

Factors influencing the partitioning and toxicity of nanotubes in the aquatic environment.

Explosives in soils can present environmental problems for military installations. Fine, mobile particles represent the most reactive fraction of the soil and, therefore, are expected to adsorb explosives and potentially facilitate their transport. The objective of this study was to determine the relative significance of phyllosilicate clay, organic matter, and two forms of extractable iron in adsorption of 2,4,6-trinitrotoluene (TNT) and hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) by the colloidal water-dispersible clay (WDC) fraction of the soil. The WDC fraction of two mineral and one organic soil was separated and then treated to remove organic carbon (OC) and several forms of iron (Fe(o), oxalate extractable, and Fe(d), dithionite-citrate extractable). Adsorption coefficients were determined for whole soils, untreated, and treated WDC. For mineral soils, adsorption of TNT and RDX on the WDC was greater than on the whole soil. The presence of OC increased explosives sorption by WDC. When OC was removed, iron interfered with TNT sorption. In the presence of OC, removal of Fe(o) decreased RDX adsorption and increased TNT adsorption indicating different adsorption mechanisms. Organic carbon was a more significant indicator of explosives adsorption by WDC than clays or iron oxides and hydroxides. Therefore, OC is the most likely medium for facilitated transport of TNT and RDX.

Sorption of high explosives to water-dispersible clay: influence of organic carbon, aluminosilicate clay, and extractable iron.

Live-fire training exercises can result in particulate propellant contamination on military training ranges and can potentially contaminate ground water. This study was conducted to evaluate dissolution of the 2,4-dinitrotoluene (2,4-DNT) and 2,6-dinitrotoluene (2,6-DNT) from the propellant formulation, M1 (87.6% nitrocellulose, 7.3% 2,4-DNT, 0.57% 2,6-DNT, 1.06% diphenylamine, 3.48% dibutyl phthalate) and their subsequent transport in soil. Batch dissolution studies were followed by saturated column transport experiments. Neat, dissolved 2,4-DNT, and M1 in solid and dissolved forms were used as influent to columns filled with Plymouth loamy sand (mesic, coated Typic Quartzipsamments) from Camp Edwards, MA. Dissolution rates and other fate and transport parameters were determined using the HYDRUS-1D code. M1 dissolution was limited by DNT diffusion from the interior of the pellet, resulting in an exponential decrease in dissolution rate with time. The HYDRUS-1D model accurately described release and transport of 2,4- and 2,6-DNT from M1 propellant. Dissolution rates for M1 in the stirred reactor and column studies were similar, indicating that batch dissolution rates are potentially useful to represent field conditions.

Dissolution and transport of 2,4-DNT and 2,6-DNT from M1 propellant in soil.

High-throughput, culture-independent surveys of bacterial and archaeal communities in soil have illuminated the importance of both edaphic and biotic influences on microbial diversity, yet few studies compare the relative importance of these factors. Here, we employ multiplexed pyrosequencing of the 16S rRNA gene to examine soil- and cactus-associated rhizosphere microbial communities of the Sonoran Desert and the artificial desert biome of the Biosphere2 research facility. The results of our replicate sampling approach show that microbial communities are shaped primarily by soil characteristics associated with geographic locations, while rhizosphere associations are secondary factors. We found little difference between rhizosphere communities of the ecologically similar saguaro (Carnegiea gigantea) and cardón (Pachycereus pringlei) cacti. Both rhizosphere and soil communities were dominated by the disproportionately abundant Crenarchaeota class Thermoprotei, which comprised 18.7% of 183,320 total pyrosequencing reads from a comparatively small number (1,337 or 3.7%) of the 36,162 total operational taxonomic units (OTUs). OTUs common to both soil and rhizosphere samples comprised the bulk of raw sequence reads, suggesting that the shared community of soil and rhizosphere microbes constitute common and abundant taxa, particularly in the bacterial phyla Proteobacteria, Actinobacteria, Planctomycetes, Firmicutes, Bacteroidetes, Chloroflexi, and Acidobacteria. The vast majority of OTUs, however, were rare and unique to either soil or rhizosphere communities and differed among locations dozens of kilometers apart. Several soil properties, particularly soil pH and carbon content, were significantly correlated with community diversity measurements. Our results highlight the importance of culture-independent approaches in surveying microbial communities of extreme environments.

Abiotic factors shape microbial diversity in Sonoran Desert soils.

Two compounds, 2,4-dinitroanisole (DNAN) and 3-nitro-1,2,4-triazol-5-one (NTO) are the main ingredients in a suite of explosive formulations that are being, or soon will be, fielded at military training ranges. We aim to understand the dissolution characteristics of DNAN and NTO and three insensitive muntions (IM) formulations that contain them. This information is needed to accurately predict the environmental fate of IM constituents, some of which may be toxic to people and the environment. We used Raman spectroscopy to identify the different constituents in the IM formulations and micro computed tomography to image their three-dimensional structure. These are the first three-dimensional images of detonated explosive particles. For multi-component explosives the solubility of the individual constituents and the fraction of each constituent wetted by water controls the dissolution. We found that the order of magnitude differences in solubility amongst the constituents of these IM formulations quickly produced hole-riddled particles when these were exposed to water. Micro-computed tomography showed that particles resulting from field detonations were fractured, producing conduits by which water could access the interior of the particle. We think that micro-computed tomography can also be used to determine the initial composition of IM particles and to track how their compositions change as the particles dissolve. This information is critical to quantifying dissolution and developing physically based dissolution models.

Insights into the dissolution and the three-dimensional structure of insensitive munitions formulations.

The US military fires live munitions during training. To save soldiers lives both during training and war, the military is developing insensitive munitions (IM) that minimize unintentional detonations. Some of the compounds in the IM formulation are, however, very soluble in water, raising environmental concerns about their fate and transport. We measured the dissolution of three of these IM formulations, IMX101, IMX104 and PAX21 using laboratory drip tests and studied the accompanying changes in particle structure using micro computed tomography. Our laboratory drip tests mimic conditions on training ranges, where spatially isolated particles of explosives scattered by partial detonations are dissolved by rainfall. We found that the constituents of these IM formulations dissolve sequentially and in the order predicted by their aqueous solubility. The order of magnitude differences in solubility among their constituents produce water solutions whose compositions and concentrations vary with time. For IMX101 and IMX104, that contain 3-nitro-1,2,4-triazol-5-one (NTO), the solutions also vary in pH. The good mass balances measured for the drip tests indicate that the formulations are not being photo-or bio-transformed under laboratory conditions.

Dissolution of three insensitive munitions formulations.

We seek to understand the environmental fate of three new insensitive munitions, explosive formulations developed to reduce the incidence of unintended detonations. To this end, we measured the size distribution of residues from low order detonations of IMX 101, IMX 104, and PAX 21-filled munitions and are studying how these three formulations weather and dissolve outdoors. The largest pieces collected from the detonations were centimeter-sized and we studied 12 of these in the outdoors test. We found that the particles break easily and that the dissolution of 2,4-dinitroanisole (DNAN) is quasi-linear as a function of water volume. DNAN is the matrix and the least soluble major constituent of the three formulations. We used DNAN's linear dissolution rate to estimate the life span of the pieces. Particles ranging in mass from 0.3 to 3.5 g will completely dissolve in 3-21 years given 100 cm y(-1) precipitation rates.

Outdoor dissolution of detonation residues of three insensitive munitions (IM) formulations.

NTO (3-nitro-1,2,4-triazol-5-one) is one of the new explosive compounds used in insensitive munitions (IM) developed to replace traditional explosives, TNT and RDX. Data on NTO fate and transport is needed to determine its environmental behavior and potential for groundwater contamination. We conducted a series of kinetic and equilibrium batch experiments to characterize the fate of NTO in soils and the effect of soil geochemical properties on NTO-soil interactions. A set of experiments was also conducted using sterilized soils to evaluate the contribution of biodegradation to NTO attenuation. Measured pH values for NTO solutions decreased from 5.98 ± 0.13 to 3.50 ± 0.06 with increase in NTO concentration from 0.78 to 100 mg L(-1). Conversely, the pH of soil suspensions was not significantly affected by NTO in this concentration range. NTO experienced minimal adsorption, with measured adsorption coefficients being less than 1 cm(3) g(-1) for all studied soils. There was a highly significant inverse relationship between the measured NTO adsorption coefficients and soil pH (P = 0.00011), indicating the role of NTO and soil charge in adsorption processes. In kinetic experiments, 1st order transformation rate constant estimates ranged between 0.0004 h(-1) and 0.0142 h(-1) (equivalent to half-lives of 72 and 2 d, respectively), and correlated positively with organic carbon in the soil. Total attenuation of NTO was higher in untreated versus sterilized samples, suggesting that NTO was being biodegraded. The information presented herein can be used to help evaluate NTO potential for natural attenuation in soils.

Katerina Dontsova

Biosphere 2,
Department of Soil,
Water and Environmental Science,
Department of Soil, Water and Environmental Science

University of Arizona

Soil Lysimeter Excavation for Coupled Hydrological, Geochemical, and Microbiological Investigations

Katerina Dontsova

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}Biosphere 2,Department of Soil,Water and Environmental Science,Department of Soil, Water and Environmental Science

University of Arizona

Soil Lysimeter Excavation for Coupled Hydrological, Geochemical, and Microbiological Investigations

Biosphere 2,
Department of Soil,
Water and Environmental Science,
Department of Soil, Water and Environmental Science