Measurement of Dynamic Force Acted on Water Strider Leg Jumping Upward by the PVDF Film Sensor

This study aimed to make an explanation for the phenomenon in nature that water strider usually jumps or glides on the water surface easily but quickly, ...

Measuring the Interaction Force Between a Droplet and a Super-hydrophobic Substrate by the Optical Lever Method

The goal of this paper is to investigate the interaction force between droplets and super-hydrophobic substrates in the air. A measurement system based on ...

A Micro-Displacement Measurement Based on the Shadow Technique

The precision measurement of micro displacement is important in scientific and industrial fields. However, it is a tough challenge due to the complex ...

Tianjin University

A micro/nano force can be traced to the International System of Units by means of an electrostatic force balance weight system. However, the micro/nano force measurement system is susceptible to environmental disturbances. Various methods have been proposed to reduce the effect of environmental disturbances and obtain high resolution and fast response. In this paper, we introduce a combination of air damping and inherent damping from the internal molecular friction of spring suspension. This will optimize system stability and improve environmental noise suppression. Results from the air damping model show that the damping ratio increases from 0.0005 to 0.1, which improves the vibration resistance. We found that the system with air damping has the advantages of fast response and low scatter. 

Improving environmental noise suppression for micronewton force sensing based on electrostatic by injecting air damping.

Coalescence-induced droplet jumping on superhydrophobic surfaces have recently received significant attention owing to their potential in a variety of applications. Previous studies demonstrated that the self-jumping process is inherently inefficient, with an energy conversion efficiency η ≤ 6% and dimensionless jumping velocity * ≤ 0.23. To realize a quick removal of droplets, increasing effort has been devoted to breaking the jumping velocity limit and inducing droplets sweeping. In this work, we used superhydrophobic surfaces with an asymmetric V-groove to experimentally achieve an enhanced coalescence-induced jumping velocity * ≈ 0.61, i.e., more than 700% increase in energy conversion efficiency compared with droplets jumping on flat superhydrophobic surfaces, which is the highest efficiency reported thus far. Moreover, the enhanced jumping direction shows a deviation as high as 60° from the substrate normal. The induced in-plane motion is conducive to remove a considerable number of droplets along the sweeping path and significantly increase the speed of droplet removal. Numerical simulation indicated that the jumping enhancement is a joint effect resulting from the impact of the liquid bridge on the corner of the V-groove and the suppression of droplet expansion by the sidewall of the V-groove. The transient variation of the droplet velocity and the driving force of the coalescing droplets on a surface with and without the asymmetric V-groove were revealed and discussed. Furthermore, effects of groove angle, droplet pair positions, and size mismatches on the jumping velocity and direction have been studied. The novel mechanism of simultaneously increasing the coalescence-induced droplet jumping velocity and changing the jumping direction can be further studied to enhance the efficiency of various applications.

Self-Enhancement of Coalescence-Induced Droplet Jumping on Superhydrophobic Surfaces with an Asymmetric V-Groove.

When two or more droplets coalesce on a superhydrophobic surface, the merged droplet can jump spontaneously from the surface without requiring any external energy. This phenomenon is defined as coalescence-induced droplet jumping and has received significant attention due to its potential applications in a variety of self-cleaning, anti-icing, antifrosting, and condensation heat-transfer enhancement uses. This article reviews the research and applications of coalescence-induced droplet jumping behavior in recent years, including the influence of droplet parameters on coalescence-induced droplet jumping, such as the droplet size, number, and initial velocity, to name a few. The main structure types and influence mechanism of the superhydrophobic substrates for coalescence-induced droplet jumping are described, and the potential application areas of coalescence-induced droplet jumping are summarized and forecasted.

Coalescence-Induced Droplet Jumping.

Coalescence-induced droplet jumping has received considerable attention owing to its potential to enhance performance in various applications. However, the energy conversion efficiency of droplet coalescence jumping is very low and the jumping direction is uncontrollable, which vastly limits the application of droplet coalescence jumping. In this work, we used superhydrophobic surfaces with a U-groove to experimentally achieve a high dimensionless jumping velocity  ≈ 0.70, with an energy conversion efficiency η ≈ 43%, about a 900% increase in energy conversion efficiency compared to droplet coalescence jumping on flat superhydrophobic surfaces. Numerical simulation and experimental data indicated that a higher jumping velocity arises from the redirection of in-plane velocity vectors to out-of-plane velocity vectors, which is a joint effect resulting from the redirection of velocity vectors in the coalescence direction and the redirection of velocity vectors of the liquid bridge by limiting maximum deformation of the liquid bridge. Furthermore, the jumping direction of merged droplets could be easily controlled ranging from 17 to 90 by adjusting the opening direction of the U-groove, with a jumping velocity  ≥ 0.70. When the opening direction is 60, the jumping direction shows a deviation as low as 17 from the horizontal surface with a jumping velocity  ≈ 0.73 and corresponding energy conversion efficiency η ≈ 46%. This work not only improves jumping velocity and energy conversion efficiency but also demonstrates the effect of the U-groove on coalescence dynamics and demonstrates a method to further control the droplet jumping direction for enhanced performance in applications.

Enhancement and Guidance of Coalescence-Induced Jumping of Droplets on Superhydrophobic Surfaces with a U-Groove.

The measurement of the droplets' elasticity is vitally important in microfluidic and ink-jet printing. It refers to the ability of the droplet to restore its original shape and strong robustness. This study investigated a novel method to measure elasticity. The plate coated with super-hydrophobic layers pressed on a droplet and the elastic force was recorded by an electronic balance. Meanwhile, a mathematical model was constructed to calculate the changes of the droplet area under the force. The measurement showed that external work mainly converts into surface energy and the damping ratio increases from 0.068 to 0.261 with the increase of mass fraction from 0 to 80 wt%. It also indicates that the novel method can accurately and efficiently measure the elasticity of droplets.

Elasticity and damping ratio measurement of droplets on super-hydrophobic surfaces.

Coalescence-induced droplet jumping has great prospects in many applications. Nevertheless, the applications are vastly limited by a low jumping velocity. Conventional methods to enhance the droplet coalescence jumping velocity are enabled by protruding structures with superhydrophobic surfaces. However, the jumping velocity improvement is limited by the height of protruding structures. Here, we present rationally designed limitation structures with superhydrophobic surfaces to achieve a dimensionless jumping velocity,  ≈ 0.64. The mechanism of enhancing the jumping velocity is demonstrated through the study of numerical simulations and geometric parameters of limitation structures, providing guidelines for optimized structures. Experimental and numerical results indicate that the mechanism consists of the combined action of the velocity vectors' redirection and the Laplace pressure difference within deformed droplets trapped in limitation structures. On the basis of previous research on the mechanisms of protruding structures and our study, we successfully exploited those mechanisms to further improve the jumping velocity by combining the limitation structure with the protruding structure. Experimentally, we attained a dimensionless jumping velocity of  ≈ 0.74 with an energy conversion efficiency of η ≈ 48%, breaking the jumping velocity limit. This work not only demonstrates a new mechanism for achieving a high jumping velocity and energy conversion efficiency but also sheds lights on the effect of limitation structures on coalescence hydrodynamics and elucidates a method to further enhance the jumping velocity based on protruding structures.

Laplace Pressure Difference Enhances Droplet Coalescence Jumping on Superhydrophobic Structures.

Liquid marbles (LMs) are non-wettable droplets formed with a coating of hydrophobic particles. They can move easily across either solid or liquid surfaces since the hydrophobic particles protect the internal liquid from contacting the substrate. In recent years, mainly due to their simple preparation, abundant materials, non-wetting/non-adhesive properties, elasticities and stabilities, LMs have been applied in many fields such as microfluidics, sensors and biological incubators. In this review, the recent advances in the preparation, physical properties and applications of liquid marbles, especially operations and floating abilities, are summarized. Moreover, the challenges to achieve uniformity, slow volatilization and stronger stability are pointed out. Various applications generated by LMs' structural characteristics are also expected.

Liquid marbles, floating droplets: preparations, properties, operations and applications.

Understanding the high water adhesion of rose petals is of great significance in artificial surface design. With all-atom molecular dynamics simulation, the wettability of nanoscale wrinkles was explored and compared to that of nanoscale strips with favorable hydrophobicity. The dewetting and wetting of gaps between nanoscale structures represent the Cassie-Baxter (CB) and Wenzel (WZ) states of the macroscopic droplet deposited on the textured surface, respectively. We uncovered the intermediate state, which is different from the CB and WZ states for wrinkles. Structures and free-energy profiles of metastable and transition states under various pressures were also investigated. Moreover, free-energy barriers for the (de)wetting transitions were quantified. On this basis, the roles of pressure and the unique structures of nanoscale wrinkles in the high water adhesion of rose petals were identified.

Molecular Dynamics Simulation on the Wettability of Nanoscale Wrinkles: High Water Adhesion of Rose Petals.

The precision of micro-force measurement depends on the force sensor sensitivity and the environmental disturbance magnitude. However, micro-force sensors generally have the poor anti-disturbance ability. Inspired by the shadow formed by water striders walking on water surface under sunlight, a viscoelastic-polymer micro-force (VPMF) sensor based on the shadow method was proposed, which could suppress disturbances effectively due to the high damping ratio of 0.22. The shadow diameter change and the applied force were proportional. The experimental results indicated that the sensitivity could reach 2.15 μN/pixel with a good linear performance. Furthermore, compared with the cantilever, it was capable of the reduction of the disturbance influence by approximately 96.35%. Therefore, the VPMF sensor can be applied to reliable micro-force measurement in complex environments such as industrial sites.

Meirong Zhao

State Key Laboratory of Precision Measuring Technology and Instruments

Tianjin University

Measurement of Dynamic Force Acted on Water Strider Leg Jumping Upward by the PVDF Film Sensor

Measuring the Interaction Force Between a Droplet and a Super-hydrophobic Substrate by the Optical Lever Method

A Micro-Displacement Measurement Based on the Shadow Technique

Meirong Zhao

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}State Key Laboratory of Precision Measuring Technology and Instruments

Tianjin University

Measurement of Dynamic Force Acted on Water Strider Leg Jumping Upward by the PVDF Film Sensor

Measuring the Interaction Force Between a Droplet and a Super-hydrophobic Substrate by the Optical Lever Method

A Micro-Displacement Measurement Based on the Shadow Technique

State Key Laboratory of Precision Measuring Technology and Instruments