JoVE Logo

Anmelden

15.4 : pH Scale

Hydronium and hydroxide ions are present both in pure water and in all aqueous solutions, and their concentrations are inversely proportional as determined by the ion product of water (Kw). The concentrations of these ions in a solution are often critical determinants of the solution’s properties and the chemical behaviors of its other solutes. Two different solutions can differ in their hydronium or hydroxide ion concentrations by a million, billion, or even trillion times. A common means of expressing quantities that may span many orders of magnitude is to use a logarithmic scale. The pH of a solution is therefore defined as shown here, where [H3O+] is the molar concentration of hydronium ion in the solution:

 Kirchhoff's loop rule diagram, showing ΣΔV=0, illustrating electrical circuit path and voltage principles.

Rearranging this equation to isolate the hydronium ion molarity yields the equivalent expression:

 Mitosis diagram showing prophase, metaphase, anaphase, and telophase stages with labeled chromosomes.

Likewise, the hydroxide ion molarity may be expressed as a p-function or pOH:

 Chromatography system diagram showing solvent flow and separation process in laboratory setup.

or

 Static equilibrium diagram with forces ΣFx=0, ΣFy=0, MA=0, showing a beam with load analysis.

Finally, the relation between these two ion concentration expressed as p-functions is easily derived from the KW expression:

 Chemical formula for knock knee and X-motion of leg, depicting structural alignment issues.

At 25 °C, the value of KW is 1.0 × 10−14, and so:

 Chromatography process diagram with column setup for organic compound separation.

The hydronium ion molarity in pure water (or any neutral solution) is 1.0 × 10−7 M at 25 °C. The pH and pOH of a neutral solution at this temperature are therefore:

 Kepler's second law diagram illustrating orbital speed variation with equal area sweeping.

And so, at this temperature, acidic solutions are those with hydronium ion molarities greater than 1.0 × 10−7 M and hydroxide ion molarities less than 1.0 × 10−7 M (corresponding to pH values less than 7.00 and pOH values greater than 7.00). Basic solutions are those with hydronium ion molarities less than 1.0 × 10−7 M and hydroxide ion molarities greater than 1.0 × 10−7 M (corresponding to pH values greater than 7.00 and pOH values less than 7.00).

Since the autoionization constant KW is temperature dependent, these correlations between pH values and the acidic/neutral/basic adjectives will be different at temperatures other than 25 °C. For example, the hydronium molarity of pure water at 80°C is 4.9 × 10−7 M, which corresponds to pH and pOH values of:

 DNA replication process diagram with polymerization symbols and enzyme interactions.

At this temperature, neutral solutions exhibit pH = pOH = 6.31, acidic solutions exhibit pH less than 6.31 and pOH greater than 6.31, whereas basic solutions exhibit pH greater than 6.31 and pOH less than 6.31. This distinction can be important when studying certain processes that occur at other temperatures, such as enzyme reactions in warm-blooded organisms at a temperature around 36 – 40 °C. Unless otherwise noted, references to pH values are presumed to be those at 25 °C.

This text is adapted from Openstax, Chemistry 2e, Section 14.2: pH and pOH.

Tags

PH ScaleHydronium IonsAqueous SolutionNegative ExponentsChemist Soren SorensonAcidityLogarithmConcentrationAcidic SolutionBasic SolutionHydroxide IonsNeutral SolutionPOH ValueAutoionization Of Water

PLAYLIST

Loading...
JoVE Logo

Datenschutz

Nutzungsbedingungen

Richtlinien

Forschung

Lehre

ÜBER JoVE

Copyright © 2025 MyJoVE Corporation. Alle Rechte vorbehalten