Name: investigating the three-dimensional flow separation induced by a model vocal fold polyp
Uploaded: 2014-02-03T14:15:00
Description: Watch this Scientific Journal Video about Investigating the Three-dimensional Flow Separation Induced by a Model Vocal Fold Polyp at JoVE.com

This work is supported by the National Science Foundation, Grant No. CBET-1236351 and GW Center for Biomimetics and Bioinspired Engineering (COBRE).

In this work, a wall-mounted prolate hemispheroid, i.e. a model vocal fold polyp, is positioned on the test section floor of a suction type wind tunnel with a 5:1 contraction ratio. Unsteady, three-dimensional flow separation and its effect on the wall pressure loading are investigated using oil-flow visualization, wall pressure measurements, and particle image velocimetry. The unsteady pressure measurements are acquired using a sixteen channel scanning pressure transducer with piezoresistive pressure sensors. T...

<ol>
	<li>Hirano, M., Kakita, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Cover-body theory of vocal fold vibration. Speech science--recent advances. , 1-46 (1985).</li><li>Gray, S. D., Titze, I. R., Alipour, F., Hammond, T. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Biomechanical+and+histologic+observations+of+vocal+fold+fibrous+proteins.">Biomechanical and histologic observations of vocal fold fibrous proteins.</a> Ann. Otol. Rhinol. Laryngol. 109 (1), 77-85 (2000).</li><li>Titze, I. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+physics+of+small-amplitude+oscillation+of+the+vocal+fold.">The physics of small-amplitude oscillation of the vocal fold.</a> J. Acoustic. Soc. Am. 83 (4), 1536-1552 (1988).</li><li>Boessenecker, A., Berry, D. A., Lohscheller, J., Eysholdt, U., D&#246;llinger, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mucosal+wave+properties+of+a+human+vocal+fold.">Mucosal wave properties of a human vocal fold.</a> Acta Acustica. 93 (5), 815-823 (2007).</li><li>Shaw, H. S., Deliyski, D. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mucosal+wave:+a+normophonic+study+across+visualization+techniques.">Mucosal wave: a normophonic study across visualization techniques.</a> J. Voice. 22 (1), 23-33 (2008).</li><li>Krausert, C. R., Olszewski, A. E., Taylor, L. N., McMurray, J. S., Dailey, S. H., Jiang, J. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mucosal+wave+measurement+and+visualization+techniques.">Mucosal wave measurement and visualization techniques.</a> J. Voice. 25 (4), 395-405 (2010).</li><li>Fant, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Acoustic+Theory+of+Speech+Production.">Acoustic Theory of Speech Production.</a> Mouton and Co. N. V.: The Hague. , 15-79 (1960).</li><li>Wegel, R. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Theory+of+vibration+of+the+larynx.">Theory of vibration of the larynx.</a> J. Acoustic. Soc. Am. 1, 1-21 (1930).</li><li>Den Berg, J. V. a. n., Zantema, J. T., Doornenbal, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=On+the+air+resistance+and+the+Bernoulli+effect+of+the+human+larynx.">On the air resistance and the Bernoulli effect of the human larynx.</a> J. Acoustic. Soc. Am. 29 (5), 626-631 (1957).</li><li>Scherer, R. C., Shinwari, D., De Witt, K. J., Zhang, C., Kucinschi, B. R., Afjeh, A. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Intraglottal+pressure+profiles+for+a+symmetric+and+oblique+glottis+with+a+divergence+angle+of+10+degrees.">Intraglottal pressure profiles for a symmetric and oblique glottis with a divergence angle of 10 degrees.</a> TJ. Acoustic. Soc. Am. 109 (4), 1616-1630 (2001).</li><li>Thomson, S. L., Mongeau, L., Frankel, S. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Aerodynamic+transfer+of+energy+to+the+vocal+folds.">Aerodynamic transfer of energy to the vocal folds.</a> TJ. Acoustic. Soc. Am. 118 (3), 1689-1700 (2005).</li><li>Erath, B. D., Plesniak, M. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+investigation+of+asymmetric+flow+features+in+a+scaled-up+driven+model+of+the+human+vocal+folds.">An investigation of asymmetric flow features in a scaled-up driven model of the human vocal folds.</a> Exp. Fluids. 49 (1), 131-146 (2010).</li><li>Petrovi&#263;-Lazi&#263;, M., Kosanovi&#263;, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Acoustic+analysis+findings+in+patients+with+vocal+fold+polyp.">Acoustic analysis findings in patients with vocal fold polyp.</a> Acta Med. Saliniana. 38 (2), 63-66 (2009).</li><li>Erath, B. D., Plesniak, M. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Three-dimensional+laryngeal+flow+fields+induced+by+a+model+vocal+fold+polyp.">Three-dimensional laryngeal flow fields induced by a model vocal fold polyp.</a> Int. J. Heat Fluid Flow. 35, 93-101 (2012).</li><li>Acarlar, M. S., Smith, C. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+study+of+hairpin+vortices+in+a+laminar+boundary+layer.+Part+1.+Hairpin+vortices+generated+by+a+hemisphere+protuberance.">A study of hairpin vortices in a laminar boundary layer. Part 1. Hairpin vortices generated by a hemisphere protuberance.</a> J. Fluid Mech. 175, 1-41 (1987).</li><li>Kawanisi, K., Maghrebi, M. F., Yokosi, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+instantaneous+3-D+analysis+of+turbulent+flow+in+the+wake+of+a+hemisphere.">An instantaneous 3-D analysis of turbulent flow in the wake of a hemisphere.</a> Boundary-Layer Meteorol. 64, 1-14 (1992).</li><li>Savory, E., Toy, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Hemisphere+and+hemisphere-cylinders+in+turbulent+boundary+layers.">Hemisphere and hemisphere-cylinders in turbulent boundary layers.</a> J. Wind Eng. Ind. Aerodyn. 23, 345-364 (1986).</li><li>Tamai, N., Asaeda, T., Tanaka, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Vortex+structures+around+a+hemispheric+hump.">Vortex structures around a hemispheric hump.</a> Boundary-Layer Meteorol. 39, 301-314 (1987).</li><li>Savory, E., Toy, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+separated+shear+layers+associated+with+hemispherical+bodies+in+turbulent+boyndary+layers.">The separated shear layers associated with hemispherical bodies in turbulent boyndary layers.</a> J. Wind Eng. Ind. Aerodyn. 28, 291-300 (1988).</li><li>Ogawa, T., Nakayama, M., Murayama, S., Sasaki, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Characteristics+of+wind+pressures+on+basic+structures+with+curved+surfaces+and+their+response+in+turbulent+flow.">Characteristics of wind pressures on basic structures with curved surfaces and their response in turbulent flow.</a> J. Wind Eng. Ind. Aerodyn. 38, 427-438 (1991).</li><li>Manhart, M., Wengle, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Large-eddy+simulation+of+turbulent+bounday+layer+flow+over+a+hemisphere.">Large-eddy simulation of turbulent bounday layer flow over a hemisphere.</a> Direct and Large-Eddy Simulation I: Selected papers from the First ERCOFTAC Workshop on Direct and Large-Eddy Simulation. , 299-301 (1994).</li><li>Manhart, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Vortex+shedding+from+a+hemisphere+in+a+turbulent+boundary+layer.">Vortex shedding from a hemisphere in a turbulent boundary layer.</a> Theor. Comp. Fluid Dyn. 12, 1-28 (1998).</li><li>Meroney, R. N., Letchford, C. W., Sarkar, P. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Comparison+of+numerical+and+wind+tunnel+simulation+of+wind+loads+on+smooth,+rough+and+dual+domes+immersed+in+a+boundary+layer.">Comparison of numerical and wind tunnel simulation of wind loads on smooth, rough and dual domes immersed in a boundary layer.</a> Wind Struct. 5 (2-4), 347-358 (2002).</li><li>Hunt, J. C. R., Abell, C. J., Peterka, J. A., Woo, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Kinematical+studies+of+the+flows+around+free+or+surface-mounted+obstacles;+applying+topology+to+flow+visualization.">Kinematical studies of the flows around free or surface-mounted obstacles; applying topology to flow visualization.</a> J. Fluid Mech. 86 (01), 179 (2006).</li><li>Legendre, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Lignes+de+courant+d'un+ecoulement+permanent:+decollement+et+separation.">Lignes de courant d'un ecoulement permanent: decollement et separation.</a> La Recherche A&#233;rospatiale. 6, 327-335 (1977).</li><li>Merzkirch, W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Visualization+of+Surface+Flow.">Visualization of Surface Flow.</a> Flow Visual. , 82-89 (1987).</li><li>Simpson, R. L., Long, C. H. H., Byun, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Study+of+vortical+separation+from+an+axisymmetric+hill.">Study of vortical separation from an axisymmetric hill.</a> Int. J. Heat Fluid Flow. 23 (5), 582-591 (2002).</li><li>Byun, G., Simpson, R. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Surface-pressure+fluctuations+from+separated+flow+over+an+axisymmetric+bump.">Surface-pressure fluctuations from separated flow over an axisymmetric bump.</a> Am. Inst. Aeronaut. Astronaut. J. 48 (10), 2397-2405 (2010).</li><li>Martinuzzi, R., Tropea, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+flow+around+surface-mounted,+prismatic+obstacles+placed+in+a+fully+developed+channel+flow.">The flow around surface-mounted, prismatic obstacles placed in a fully developed channel flow.</a> J. Fluids Eng. 115, 85-92 (1993).</li><li>R&#246;diger, T., Knauss, H., Gaisbauer, U., Kr&#228;mer, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Pressure+and+heat+flux+measurements+on+the+surface+of+a+low-aspect-ratio+circular+cylinder+mounted+on+a+ground+plate.">Pressure and heat flux measurements on the surface of a low-aspect-ratio circular cylinder mounted on a ground plate.</a> New Results Num. Exp. Fluid Mech. VI. , 121-128 (2007).</li><li>Martinuzzi, R., AbuOmar, M., Savory, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Scaling+of+the+wall+pressure+field+around+surface-mounted+pyramids+and+other+bluff+bodies.">Scaling of the wall pressure field around surface-mounted pyramids and other bluff bodies.</a> J. Fluids Eng. 129, 1147-1156 (2007).</li><li>Taniguchi, S., Sakamoto, H., Kiya, M., Arie, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Time-averaged+aerodynamic+forces+acting+on+a+hemisphere+immersed+in+a+turbulent+boundary.">Time-averaged aerodynamic forces acting on a hemisphere immersed in a turbulent boundary.</a> J. Wind Eng. Indust. Aerodyn. 9, 257-273 (1982).</li><li>Triep, M., Br&#252;cker, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Three-dimensional+nature+of+the+glottal+jet.">Three-dimensional nature of the glottal jet.</a> The Journal of the Acoustic. Soc. Am. 127 (3), 1537-1547 (2010).</li><li>Khosla, S., Murugappan, S., Paniello, R., Ying, J., Gutmark, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Role+of+vortices+in+voice+production:+normal+versus+asymmetric+tension.">Role of vortices in voice production: normal versus asymmetric tension.</a> Laryngoscope. 119 (1), 216-221 (2009).</li><li>Drechsel, J. S., Thomson, S. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Influence+of+supraglottal+structures+on+the+glottal+jet+exiting+a+two-layer+synthetic,+self-oscillating+vocal+fold+model.">Influence of supraglottal structures on the glottal jet exiting a two-layer synthetic, self-oscillating vocal fold model.</a> The Journal of the Acoustical Society of America. 123 (6), 4434-4445 (2008).</li><li>Raffel, M., Willert, C., Kompenhans, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Particle Image Velocimetry: A Practical Guide. , (1998).</li><li>Neubauer, J., Zhang, Z., Miraghaie, R., Berry, D. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Coherent+structures+of+the+near+field+flow+in+a+self-oscillating+physical+model+of+the+vocal+folds.">Coherent structures of the near field flow in a self-oscillating physical model of the vocal folds.</a> J. Acoustic. Soc. Am. 121 (2), 1102-1118 (2007).</li><li>Krebs, F., Silva, F., Sciamarella, D., Artana, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+three-dimensional+study+of+the+glottal+jet.">A three-dimensional study of the glottal jet.</a> Exp. Fluids. 52 (5), 1133-1147 (2011).</li><li>Adrian, R. J., Westerweel, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Particle image velocimetry. 30, (2010).</li><li>Tobak, M., Peake, D. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Topology+of+three-dimensional+separated+flows.">Topology of three-dimensional separated flows.</a> Ann. Rev. Fluid Mech. 14, 61-85 (1982).</li><li>Zhang, Y., Jiang, J. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Asymmetric+Spatiotemporal+Chaos+Induced+by+a+Polypoid+Mass+in+the+Excised+Canine+Larynx.">Asymmetric Spatiotemporal Chaos Induced by a Polypoid Mass in the Excised Canine Larynx.</a> Chaos. 18, 43102 (2008).</li><li>D&#233;lery, J. M., Jean, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Delery+Toward+the+elucidation+of+three-dimensional+separation.">Delery Toward the elucidation of three-dimensional separation.</a> Ann. Rev. Fluid Mech. 33, 129-154 (2001).</li></ol>

Understanding the formation and propagation of vortical structures from a geometric protuberance&#160;and their subsequent effect on the aerodynamic loadings that drive vocal fold dynamics, is necessary to provide insight and models in order to advance the treatment of vocal fold polyps and nodules. The variations in aerodynamic loadings caused by the model polyp in this experiment are expected to contribute to irregular vocal fold dynamics observed in patients with polyps13,41. Future work includes investigat...

The vocal folds are two bands of tissue that stretch across the vocal airway. Voiced speech is produced when a critical lung pressure is achieved, forcing air through adducted vocal folds. The vocal folds are composed of many layers of tissue and are often represented by a simplified two-layer body-cover system1. The extracellular matrix, which makes up the majority of the cover layer, is composed of collagen and elastin fibers, providing nonlinear stress-strain characteristics, which are important to the proper motion of the vocal folds1,2. Aerodynamic forces impart energy to the tissue of the vocal folds and excite self-sustained oscillations3. As the vocal folds oscillate, the opening between them, referred to as the glottis, forms a temporally-varying orifice that transitions from a convergent to a uniform and then to a divergent passage before closing and repeating the cycle4,6. Frequencies of vibration for normal speech typically span 100-220 Hz in males and females respectively, creating a pulsatile flow field that passes through the glottis7. The fluid-structure energy exchange process for normal speech has been studied extensively8-12; however, the disruption of this process for some pathologies is not well understood. Pathological conditions of the vocal folds can result in dramatic changes in their dynamics and affect the ability to generate voiced speech.
Polyps and nodules are geometric abnormalities that form on the medial surface of the vocal folds. These abnormalities can affect a patient&#39;s ability to communicate13. Nevertheless, only recently has the disruption of the flow field due to a geometric protuberance such as a polyp been considered14. That study showed that the &#34;normal&#34; fluid-structure energy-exchange process of speech was drastically altered, and that the modification of the flow field was the most likely reason for the severe degradation of vocal quality in patients with polyps and nodules. No comprehensive understanding of the flow structures produced by three-dimensional flow separation from a polyp in pulsatile flow has been established. The generation and propagation of vortical structures from a polyp, and their subsequent impact on the aerodynamic loadings that drive vocal fold dynamics is a necessary critical component to advance surgical remediation of polyps in patients.
While flow separation from a wall mounted hemispheroid in steady flow has been investigated15-23, surprisingly, there is little information regarding unsteady three-dimensional flow separation from a hemispheroid on a wall subject to pulsatile or unsteady flow conditions as are found in speech. The seminal work of Acarlar and Smith15 provided an analysis of the three-dimensional coherent structures generated by steady flow over a wall mounted hemispheroid within a laminar boundary layer. Acarlar and Smith identified two types of vortical structures. A standing horseshoe vortex was formed upstream of the hemispheroid protuberance and extended downstream of the protuberance on either side. Additionally, hairpin vortices were shed periodically from the wall mounted hemispheroid into the wake. The complex motion and progression of the hairpin vortices was investigated and described in detail.
Flow over a smoothly contoured axisymmetric hill has been previously studied in which both surface static pressure measurements and surface oil visualization were acquired on and downstream of the bump within a turbulent shear flow. Oil-film techniques enable the visualization of skin friction lines, high and low velocity regions, and separation and attachment points within a surface flow, and are useful to investigate the wake of a wall-mounted object. For this technique, the surface of interest is coated with a thin film of an oil-base and fine powder pigment (i.e. lampblack, graphite powder, or titanium dioxide) mixture. At the desired flow conditions, frictional forces cause the oil to move along the surface causing the pigment powder to be deposited in streaks. Critical or singularity points, locations where the shear stress is zero or two or more components of the mean velocity are zero, can be classified from the resulting skin friction line pattern as saddle points or nodal points24-26.
For the hill geometry, no singularity caused by separation was found upstream; this was attributed to the smoothly ascending contour of the bump, which did not generate the adverse pressure gradient that occurs with a hemispheroid protuberance. Consequently, the flow was found to accelerate until the pinnacle of the bump after which, unsteady saddle-focus separation points developed shortly past the bump centerline, as would be expected from the formation of a hairpin vortex27,28. In a study using similar experimental techniques with a different wall-mounted geometry, oil-film visualization around a surface-mounted cube in steady flow performed by Martinuzzi and Tropea29 displayed two clear skin friction lines upstream of the object. The first skin friction line corresponded to the primary separation line caused by the adverse pressure gradient and the second skin friction line marked the time-averaged location of the horseshoe vortex. Surface pressure measurements performed upstream of the object showed a local minimum along the horseshoe vortex line and a local pressure maximum between the primary separation and horseshoe vortex lines. Similar upstream separation lines are formed with other surface-mounted geometries including a circular cylinder, pyramid, and cone29-31. Surface visualization downstream of wall-mounted objects typically displays two foci caused by the recirculation region behind the object30. Two vortices are generated at the foci positions and correspond to the &#34;arch-type&#34; or hairpin vortex seen in the wake of a wall-mounted hemispheroid32.
Particle image velocimetry (PIV) has been previously used to study the flow downstream of synthetic vocal fold models33-35. PIV is a noninvasive visualization technique which images flow tracer particle movement within a plane at to capture spatio-temporal fluid dynamics36.&#160;Three-dimensional coherent structures which form downstream of the oscillating vocal folds have been studied by Neubauer et al.37; vortex generation and convection and jet flapping was observed. Recently, Krebs et al.38 studied the three-dimensionality of the glottal jet using stereoscopic PIV and the results demonstrate glottal jet axis switching. Erath and Plesniak14 investigated the effect of a model vocal fold polyp on the medial surface of a 7.5 times scaled-up dynamically driven vocal fold model. A recirculation region was formed downstream of the polyp and the jet dynamics were affected throughout the phonatory cycle. The previous studies, barring the driven vocal fold polyp study by Erath and Plesniak14, have not explored the fluid dynamics induced by a medial vocal fold polyp or nodule.
It is important to understand the fluid dynamic effect of the model polyp within steady and pulsatile flow fields before including the additional complexity of the vocal fold moving walls, induced pressure gradients, confined geometric volume and other intricacies. The current work focuses on the signature of the flow structures on the downstream wall under both steady and unsteady flow conditions. The interactions between the vortical structures that are shed from a protrusion and the downstream wall is of great interest for the investigation of vocal fold polyps as well as other biological considerations, as these interactions elicit a biological response.

<table border="0" cellpadding="0" cellspacing="0" width="699">
	<colgroup>
		<col />
		<col />
		<col />
		<col />
	</colgroup>
	<tbody>
		<tr height="126">
			<td height="126" style="height:126px;width:216px;">Rapid Prototyper</td>
			<td style="width:139px;">Objet</td>
			<td style="width:119px;">Objet24</td>
			<td style="width:227px;">Tray Size (X&#215;Y&#215;Z): 240 &#215; 200 &#215; 150 mm 
			Build layer thickness =&#160; 28 &#181;m&#160; 
			Accuracy = 0.1 mm 
			Build Resolution: X-axis: 600 dpi, Y-axis: 600 dpi, Z-axis: 900 dpi</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:216px;">Rapid Prototyper Model Material</td>
			<td style="width:139px;">Objet</td>
			<td style="width:119px;">VeroWhite Plus Fullcure 835</td>
			<td style="width:227px;"></td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:216px;">Rapid Prototyper Support Material</td>
			<td style="width:139px;">Objet</td>
			<td style="width:119px;">FullCure 705 Support</td>
			<td style="width:227px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Copy Toner</td>
			<td style="width:139px;">Xerox</td>
			<td style="width:119px;"></td>
			<td style="width:227px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Kerosene</td>
			<td style="width:139px;">Sunnyside</td>
			<td style="width:119px;"></td>
			<td style="width:227px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Baby Oil</td>
			<td style="width:139px;">Johnson&#39;s</td>
			<td style="width:119px;"></td>
			<td style="width:227px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Adhesive Paper</td>
			<td style="width:139px;">Con-Tact Brand</td>
			<td style="width:119px;"></td>
			<td style="width:227px;">White adhesive covering</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Tygon Tubing</td>
			<td style="width:139px;">Tygon</td>
			<td style="width:119px;">PVC Tubing</td>
			<td style="width:227px;">1/16&#34; ID, 3/16&#34;OD</td>
		</tr>
		<tr height="151">
			<td height="151" style="height:151px;width:216px;">Pressure Scanner (16 channel)</td>
			<td style="width:139px;">Scanivalve</td>
			<td style="width:119px;">DSA3217</td>
			<td style="width:227px;">Used for gas pressure measurements 
			Pressure range = +/- 5&#34; H2O 
			Full scale accuracy = +/-0.3% full scale accuracy.&#160; 
			Maximum scan rate = 500 Hz/channel</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Stainless Steel Tubulations</td>
			<td style="width:139px;">Scanivalve</td>
			<td style="width:119px;">TUBN-063-1.0</td>
			<td style="width:227px;">0.063&#34; Diameter and 1&#34; Length</td>
		</tr>
	</tbody>
</table>

investigating the three-dimensional flow separation induced by a model vocal fold polyp

The fluid-structure energy exchange process for normal speech has been studied extensively, but it is not well understood for pathological conditions. Polyps and nodules, which are geometric abnormalities that form on the medial surface of the vocal folds, can disrupt vocal fold dynamics and thus can have devastating consequences on a patient&#39;s ability to communicate. Our laboratory has reported particle image velocimetry (PIV) measurements, within an investigation of a model polyp located on the medial surface of an in&#160;vitro driven vocal fold model, which show that such a geometric abnormality considerably disrupts the glottal jet behavior. This flow field adjustment is a likely reason for the severe degradation of the vocal quality in patients with polyps. A more complete understanding of the formation and propagation of vortical structures from a geometric protuberance, such as a vocal fold polyp, and the resulting influence on the aerodynamic loadings that drive the vocal fold dynamics, is necessary for advancing the treatment of this pathological condition. The present investigation concerns the three-dimensional flow separation induced by a wall-mounted prolate hemispheroid with a 2:1 aspect ratio in cross flow, i.e. a model vocal fold polyp, using an oil-film visualization technique. Unsteady, three-dimensional flow separation and its impact of the wall pressure loading are examined using skin friction line visualization and wall pressure measurements.

Previous work using a 7.5 times scaled-up dynamically driven vocal fold model has demonstrated that the presence of a geometric protuberance, model vocal fold polyp, disrupts the normal dynamics of the glottal jet throughout the phonatory cycle. Representative results from the previous driven vocal fold model study are displayed in Figure 2 and Video 2. The video demonstrates the motion of the driven vocal folds as they change from a convergent to a divergent geometry. The vocal fold mod...

Watch this Scientific Journal Video about Investigating the Three-dimensional Flow Separation Induced by a Model Vocal Fold Polyp at JoVE.com

Investigating the Three-dimensional Flow Separation Induced by a Model Vocal Fold Polyp

Vocal fold polyps can disrupt vocal fold dynamics and thus can have devastating consequences on a patient&#39;s ability to communicate. Three-dimensional flow separation induced by a wall-mounted model polyp and its impact on the wall pressure loading are examined using particle image velocimetry, skin friction line visualization, and wall pressure measurements.

The fluid-structure energy exchange process for normal speech has been studied extensively, but it is not well understood for pathological conditions. ...

Research

JoVE Journal

Bioengineering

The Three-Dimensional Human Skin Reconstruct Model: a Tool to Study Normal  Skin and Melanoma Progression

Most in vitro studies in experimental skin biology have been done in 2-dimensional (2D) monocultures, while accumulating evidence suggests that cells ...

Planar and Three-Dimensional Printing of Conductive Inks

Printed electronics rely on low-cost, large-area fabrication routes to create flexible or multidimensional electronic, optoelectronic, and biomedical ...

Synthetic, Multi-Layer, Self-Oscillating Vocal Fold Model Fabrication

Sound for the human voice is produced via flow-induced vocal fold vibration. The vocal folds consist of several layers of tissue, each with differing ...

Three-dimensional Cell Culture Model for Measuring the Effects of Interstitial Fluid Flow on Tumor Cell Invasion

The growth and progression of most solid tumors depend on the initial transformation of the cancer cells and their response to stroma-associated signaling ...

A Novel Three-dimensional Flow Chamber Device to Study Chemokine-directed Extravasation of Cells Circulating under Physiological Flow Conditions

Extravasation of circulating cells from the bloodstream plays a central role in many physiological and pathophysiological processes, including stem cell ...

Human Cartilage Tissue Fabrication Using Three-dimensional Inkjet Printing Technology

Bioprinting, which is based on thermal inkjet printing, is one of the most attractive enabling technologies in the field of tissue engineering and ...

Construction and Characterization of a Novel Vocal Fold Bioreactor

In vitro engineering of mechanically active tissues requires the presentation of physiologically relevant mechanical conditions to cultured cells. To ...

Analysis of Cell Migration within a Three-dimensional Collagen Matrix

The ability to migrate is a hallmark of various cell types and plays a crucial role in several physiological processes, including&#160;embryonic ...

Generation of a Three-dimensional Full Thickness Skin Equivalent and Automated Wounding

In vitro models are a cost effective and ethical alternative to study cutaneous wound healing processes. Moreover, by using human cells, these models ...

Studying Protein Function and the Role of Altered Protein Expression by Antibody Interference and Three-dimensional Reconstructions

A strict management of protein expression is not only essential to every organism alive, but also an important strategy to investigate protein functions ...