electrospray-deposition-uniform-thickness-ge23sb7s70-as40s60

Electrospray Deposition of Uniform Thickness Ge23Sb7S70 and As40S60 Chalcogenide Glass Films

Solution-based electrospray film deposition, which is compatible with continuous, roll-to-roll processing, is applied to chalcogenide glasses. Two ...

Massachusetts Institute of Technology

In this paper, we demonstrate high optical quantum efficiency (90%) resonant-cavity-enhanced mid-infrared photodetectors fabricated monolithically on a silicon platform. High quality photoconductive polycrystalline PbTe film is thermally evaporated, oxygen-sensitized at room temperature and acts as the infrared absorber. The cavity-enhanced detector operates in the critical coupling regime and shows a peak responsivity of 100 V/W at the resonant wavelength of 3.5 microm, 13.4 times higher compared to blanket PbTe film of the same thickness. Detectivity as high as 0.72 x 10(9) cmHz(1/2)W(-1) has been measured, comparable with commercial polycrystalline mid-infrared photodetectors. As low temperature processing (< 160 degrees C) is implemented in the entire fabrication process, our detector is promising for monolithic integration with Si readout integrated circuits.

Resonant-cavity-enhanced mid-infrared photodetector on a silicon platform.

Design and non-lithographic fabrication of light trapping structures for thin film silicon solar cells.

We show that octave-spanning Kerr frequency combs with improved spectral flatness of comb lines can be generated in dispersion-flattened microring resonators. The resonator is formed by a strip/slot hybrid waveguide, exhibiting a flat and low anomalous dispersion between two zero-dispersion wavelengths that are separated by one octave from near-infrared to mid-infrared. Such flattened dispersion profiles allow for the generation of mode-locked frequency combs, using relatively low pump power to obtain two-cycle cavity solitons on a chip, associated with the octave-spanning comb bandwidth. The wavelength dependence of the optical loss and of the coupling coefficient and thus wavelength dependent Q-factor are also considered.

Generation of two-cycle pulses and octave-spanning frequency combs in a dispersion-flattened micro-resonator.

We analytically and numerically investigate the nonlinear conversion efficiency in ring microresonator-based mode-locked frequency combs under different dispersion conditions. Efficiency is defined as the ratio of the average round trip energy values for the generated pulse(s) to the input pump light. We find that the efficiency degrades with growth of the comb spectral width and is inversely proportional to the number of comb lines. It depends on the cold-cavity properties of a microresonator only and can be improved by increasing the coupling coefficient. Also, it can be increased in the multi-soliton state.

Nonlinear conversion efficiency in Kerr frequency comb generation.

The present article focuses on the influence of gamma irradiation on nanoscale polymer grafted films and explores avenues for improvements in their stability toward the ionizing radiation. In terms of applications, we concentrate on enrichment polymer layers (EPLs), which are polymer thin films employed in sensor devices for the detection of chemical and biological substances. Specifically, we have studied the influence of gamma irradiation on nanoscale poly(glycidyl methacrylate) (PGMA) grafted EPL films. First, it was determined that a significant level of cross-linking was caused by irradiation in pure PGMA films. The cross-linking is accompanied by the formation of conjugated ester, carbon double bonds, hydroxyl groups, ketone carbonyls, and the elimination of epoxy groups as determined by FTIR. Polystyrene, 4-amino-2,2,6,6-tetramethylpiperidine-1-oxyl, dimethylphenylsilanol, BaF2, and gold nanoparticles were incorporated into the films and were found to mitigate different aspects of the radiation damage.

Stability of Grafted Polymer Nanoscale Films toward Gamma Irradiation.

One of the most important parts of healthcare system is diagnostics. Nowadays, Indians have become more aware of their health, due to improved and better availability of health related information, increase in medical tourism, and expanding health insurance. The demand for better diagnostic facilities have increased with the increase in lifestyle related diseases, excesses use of chemicals in agriculture practices and change in food habits. It is expected that the Indian diagnostic market will grow from USD $5 billion in the year 2012 to USD $32 billion by the year 2020 with 20% CAGR (India Brand Equity Foundation 2015 ). Today patients have easy access of information regarding the health services and they have become more concerned about it as they look forward to receiving the maximum value for their money. To win the confidence of the patients and to maintain that trust, it is required to deliver the right services to the right person at the right time. The purpose of this study was to develop a scale to measure the service quality at pathology laboratory. A thorough review of literature revealed that there are studies related to healthcare service quality but there is no such established scale to measure service quality of pathology laboratory. Thus, the authors strived to develop a reliable and valid instrument to measure the patients' perception toward pathology laboratory service quality. For this exploratory study was conducted on the sample of 80 patients of the laboratories in Jaipur city. The reliability and factor structures were tested to purify the scale. The findings revealed 13 items, comprising of three dimensions of service quality: responsiveness, tangibility, and reliability.

Service Quality and Patient Satisfaction: An Exploratory Study of Pathology Laboratories in Jaipur.

To support the use of integrated photonics in harsh environments, such as outer space, the hardness threshold to high-energy radiation must be established. Here, we investigate the effects of gamma (γ) rays, with energy in the MeV-range, on silicon photonic waveguides. By irradiation of high-quality factor amorphous silicon core resonators, we measure the impact of γ rays on the materials incorporated in our waveguide system, namely amorphous silicon, silicon dioxide, and polymer. While we show the robustness of amorphous silicon and silicon dioxide up to an absorbed dose of 15 Mrad, more than 100× higher than previous reports on crystalline silicon, polymer materials exhibit changes with doses as low as 1 Mrad.

Anuradha Agarwal

Microphotonics Center

Massachusetts Institute of Technology

Electrospray Deposition of Uniform Thickness Ge₂₃Sb₇S₇₀ and As₄₀S₆₀ Chalcogenide Glass Films

Anuradha Agarwal

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}Microphotonics Center

Massachusetts Institute of Technology

Electrospray Deposition of Uniform Thickness Ge23Sb7S70 and As40S60 Chalcogenide Glass Films

Microphotonics Center

Electrospray Deposition of Uniform Thickness Ge₂₃Sb₇S₇₀ and As₄₀S₆₀ Chalcogenide Glass Films