Iniciar sesión

Jianzhong Fu

State Key Laboratory of Fluid Power and Mechatronic Systems,
School of Mechanical Engineering,
Key Laboratory of 3D Printing Process and Equipment of Zhejiang Province,
State Key Laboratory of Fluid Power and Mechatronic Systems, School of Mechanical Engineering,
Key Laboratory of 3D Printing Process and Equipment of Zhejiang Province, School of Mechanical Engineering

Zhejiang University

BIOGRAPHY

Jianzhong Fu has not added Biography.

If you are Jianzhong Fu and would like to personalize this page please email our Author Liaison for assistance.

PUBLICATIONS

Research on a power management system for thermoelectric generators to drive wireless sensors on a spindle unit.

Sensors (Basel, Switzerland) Jul, 2014 | Pubmed ID: 25033189

Bioactive glass-reinforced bioceramic ink writing scaffolds: sintering, microstructure and mechanical behavior.

Biofabrication Sep, 2015 | Pubmed ID: 26355654

Simultaneous mechanical property and biodegradation improvement of wollastonite bioceramic through magnesium dilute doping.

Journal of the mechanical behavior of biomedical materials Feb, 2016 | Pubmed ID: 26426432

Research on the printability of hydrogels in 3D bioprinting.

Scientific reports 07, 2016 | Pubmed ID: 27436509

3D Printing of Ultratough Polyion Complex Hydrogels.

ACS applied materials & interfaces Nov, 2016 | Pubmed ID: 27779379

Bone regeneration in 3D printing bioactive ceramic scaffolds with improved tissue/material interface pore architecture in thin-wall bone defect.

Biofabrication 04, 2017 | Pubmed ID: 28287077

Study of Pinch-Off Locations during Drop-on-Demand Inkjet Printing of Viscoelastic Alginate Solutions.

Langmuir : the ACS journal of surfaces and colloids 05, 2017 | Pubmed ID: 28457137

Fabrication of cerebral aneurysm simulator with a desktop 3D printer.

Scientific reports 05, 2017 | Pubmed ID: 28513626

Capturing PM2.5 Emissions from 3D Printing via Nanofiber-based Air Filter.

Scientific reports 09, 2017 | Pubmed ID: 28871170

3D Bioprinting of Low-Concentration Cell-Laden Gelatin Methacrylate (GelMA) Bioinks with a Two-Step Cross-linking Strategy.

ACS applied materials & interfaces Feb, 2018 | Pubmed ID: 29405059

Separation of mixed waste plastics via magnetic levitation.

Waste management (New York, N.Y.) Jun, 2018 | Pubmed ID: 29506775

Self-Sensing of Position-Related Loads in Continuous Carbon Fibers-Embedded 3D-Printed Polymer Structures Using Electrical Resistance Measurement.

Sensors (Basel, Switzerland) Mar, 2018 | Pubmed ID: 29584665

Airflow-Assisted 3D Bioprinting of Human Heterogeneous Microspheroidal Organoids with Microfluidic Nozzle.

Small (Weinheim an der Bergstrasse, Germany) 09, 2018 | Pubmed ID: 30133151

On-line measurement of clamping force for injection molding machine using ultrasonic technology.

Ultrasonics Jan, 2019 | Pubmed ID: 30139567

Interpenetrating polymer network hydrogels composed of chitosan and photocrosslinkable gelatin with enhanced mechanical properties for tissue engineering.

Materials science & engineering. C, Materials for biological applications Nov, 2018 | Pubmed ID: 30184788

Fiber-Based Mini Tissue with Morphology-Controllable GelMA Microfibers.

Small (Weinheim an der Bergstrasse, Germany) 11, 2018 | Pubmed ID: 30253060

Vessel-on-a-chip with Hydrogel-based Microfluidics.

Small (Weinheim an der Bergstrasse, Germany) 11, 2018 | Pubmed ID: 30307698

3D Printed Paper-Based Microfluidic Analytical Devices.

Micromachines Jun, 2016 | Pubmed ID: 30404282

Electro-Assisted Bioprinting of Low-Concentration GelMA Microdroplets.

Small (Weinheim an der Bergstrasse, Germany) Jan, 2019 | Pubmed ID: 30569632

3D printing of complex GelMA-based scaffolds with nanoclay.

Biofabrication 04, 2019 | Pubmed ID: 30836349

Bioprinting of Cell-Laden Microfiber: Can It Become a Standard Product?

Advanced healthcare materials May, 2019 | Pubmed ID: 30866173

Improving the electrospinning process of fabricating nanofibrous membranes to filter PM2.5.

The Science of the total environment May, 2019 | Pubmed ID: 30970468

Magnetic projection: A novel separation method and its first application on separating mixed plastics.

Waste management (New York, N.Y.) Mar, 2019 | Pubmed ID: 31109585

Glucosamine-grafted methacrylated gelatin hydrogels as potential biomaterials for cartilage repair.

Journal of biomedical materials research. Part B, Applied biomaterials Aug, 2019 | Pubmed ID: 31369700

Micro/nanofabrication of brittle hydrogels using 3D printed soft ultrafine fiber molds for damage-free demolding.

Biofabrication Nov, 2019 | Pubmed ID: 31726448

3D printed multi-scale scaffolds with ultrafine fibers for providing excellent biocompatibility.

Materials science & engineering. C, Materials for biological applications Feb, 2020 | Pubmed ID: 31761213

3D biofabrication of microfiber-laden minispheroids: a facile 3D cell co-culturing system.

Biomaterials science Dec, 2019 | Pubmed ID: 31761908

Synchronous 3D Bioprinting of Large-Scale Cell-Laden Constructs with Nutrient Networks.

Advanced healthcare materials Dec, 2019 | Pubmed ID: 31846229

INSTITUTIONS

Zhejiang University

JOVE ARTICLES

Protocols of 3D Bioprinting of Gelatin Methacryloyl Hydrogel Based Bioinks

Mingjun Xie^1,2,

Kang Yu^1,2,

Yuan Sun^1,2,

Lei Shao^1,2,

Jing Nie^1,2,

Qing Gao^1,2,

Jingjiang Qiu³,

Jianzhong Fu^1,2,

Zichen Chen^1,2,

Yong He^1,2

¹State Key Laboratory of Fluid Power and Mechatronic Systems, School of Mechanical Engineering, Zhejiang University,

²Key Laboratory of 3D Printing Process and Equipment of Zhejiang Province, School of Mechanical Engineering, Zhejiang University,

³School of Mechanics and Safety Engineering, Zhengzhou University

Bioengineering

Privacidad

Condiciones de uso

Políticas

Contáctenos

RECOMIENDE A LA BIBLIOTECA

BOLETINES de JoVE

Investigación

JoVE Journal
Colecciones de métodos
JoVE Encyclopedia of Experiments
Archivo

Educación

JoVE Core
JoVE Business
JoVE Science Education
JoVE Lab Manual
Centro de recursos académicos
Faculty Site

Autores

Descripción
Proceso de publicación
Comité editorial
Ámbito y políticas
Revisión por pares
Preguntas frecuentes
Enviar

Bibliotecarios

Descripción
Testimonios
Suscripciones
Acceso
Recursos
Junta Asesora de Bibliotecarios
Preguntas frecuentes

ACERCA DE JoVE

Descripción
Liderazgo
Blog
JoVE Help Center