Visualizing Solution Structure at Solid-Liquid Interfaces using Three-Dimensional Fast Force Mapping

Amongst the challenges for a variety of research fields are the visualization of solid-liquid interfaces and understanding how they are affected by the ...

Pacific Northwest National Laboratory

According to classical nucleation theory, nucleation from solution involves the formation of small atomic clusters. Most formulations of classical nucleation use continuum "droplet" approximations to describe the properties of these clusters. However, the discrete atomic nature of very small clusters may cause deviations from these approximations. Here, we present a self-consistent framework for describing the nature of these deviations. We use our framework to investigate the formation of "polycube" atomic clusters on a cubic lattice, for which we have used combinatoric data to calculate the thermodynamic properties of clusters with 17 atoms or less. We show that the classical continuum droplet model emerges as a natural approach to describe the free energy of small clusters, but with a size-dependent surface tension. However, this formulation only arises if an appropriate "site-normalized" definition is adopted for the free energy of formation. These results are independently confirmed through the use of Monte Carlo calculations. Our results show that clusters formed from sparingly soluble materials (μM solubility range) tend to adopt compact configurations that minimize the solvent-solute interaction energy. As a consequence, there are distinct minima in the cluster-size-energy landscape that correspond to especially compact configurations. Conversely, highly soluble materials (1M) form clusters with expanded configurations that maximize configurational entropy. The effective surface tension of these clusters tends to smoothly and systematically decrease as the cluster size increases. However, materials with intermediate solubility (1 mM) are found to have a balanced behavior, with cluster energies that follow the classical "droplet" scaling laws remarkably well.

The energetics of prenucleation clusters in lattice solutions.

Mechanisms of CaCO nucleation from solutions that depend on multistage pathways and the existence of species far more complex than simple ions or ion pairs have recently been proposed. Herein, we provide a tightly coupled theoretical and experimental study on the pathways that precede the initial stages of CaCO nucleation. Starting from molecular simulations, we succeed in correctly predicting bulk thermodynamic quantities and experimental data, including equilibrium constants, titration curves, and detailed x-ray absorption spectra taken from the supersaturated CaCO solutions. The picture that emerges is in complete agreement with classical views of cluster populations in which ions and ion pairs dominate, with the concomitant free energy landscapes following classical nucleation theory.

Supersaturated calcium carbonate solutions are classical.

During non-classical growth of nanostructures via assembly of primary nuclei, nucleation and assembly are assumed to be distinct processes: nanoparticles nucleate randomly and aggregate to form extended structures through Brownian motion in the presence of long-range attractive interactions. Here we investigate the relationship between these two processes by using in situ AFM, in situ, ex situ and cryo TEM and UV-Vis spectroscopy to observe growth of colloidal gold and simulations to develop a mechanistic model of the process. Our results reveal an inexorable link between nucleation and assembly with nuclei forming almost exclusively within a ∼1 nm interfacial region of existing particles. The new particles immediately close the gap either through a diffusive jump or via growth of a neck between the seed and new particle, generating aggregates exhibiting features commonly attributed to oriented attachment of independently nucleated particles. The results demonstrate that creation of initial particle interfaces leads to local environments that redirect growth towards non-classical processes.

Near surface nucleation and particle mediated growth of colloidal Au nanocrystals.

Although oriented aggregation of particles is a widely recognized mechanism of crystal growth, the impact of many fundamental parameters, such as crystallographically distinct interfacial structures, solution composition, and nanoparticle morphology, on the governing mechanisms and assembly kinetics are largely unexplored. Thus, the collective dynamics of systems exhibiting OA has not been predicted. In this context, we investigated the structure and dynamics of boehmite aggregation as a function of solution pH and ionic strength. Cryogenic transmission electron microscopy shows that boehmite nanoplatelets assemble by oriented attachment on (010) planes. The coagulation rate constants obtained from dynamic light scattering during the early stages of aggregation span 7 orders of magnitude and cross both the reaction-limited and diffusion-limited regimes. Combining a simple scaling analysis with calculations for stability ratios and rotational/translational diffusivities of irregular particle shapes, the effects of orientation for irregular-shaped particles on the early stages of aggregation are understood via angular dependencies of van der Waals, electrostatic, and hydrodynamic interactions. Using Monte Carlo simulations, we found that a simple geometric parameter, namely, the contact area between two attaching nanoplatelets, presents a useful tool for correlating nanoparticle morphologies to the emerging larger-scale aggregates, hence explaining the unusually high fractal dimensions measured for boehmite aggregates. Our findings on nanocrystal transport and interactions provide insights toward the predictive understanding of nanoparticle growth, assembly, and aggregation, which will address critical challenges in developing synthesis strategies for nanostructured materials, understanding the evolution of geochemical reservoirs, and addressing many environmental problems.

Impact of Solution Chemistry and Particle Anisotropy on the Collective Dynamics of Oriented Aggregation.

Muscovite mica (001) is a widely used model surface for controlling molecular assembly and a common substrate for environmental adsorption processes. The mica (001) surface displays near-trigonal symmetry, but many molecular adsorbates-including water-exhibit unequal probabilities of alignment along its three nominally equivalent lattice directions. Buried hydroxyl groups within the muscovite structure are speculated to be responsible, but direct evidence is lacking. Here, we utilize vibrational sum frequency generation spectroscopy (vSFG) to characterize the orientation and hydrogen-bonding environment of near-surface hydroxyls inside mica. Multiple distinct peaks are detected in the O-H stretch region, which we attribute to Si/Al substitution in the SiO tetrahedron and K ion adsorption above the hydroxyls based on density functional theory simulations. Our findings demonstrate that vSFG can identify the absolute orientation of -OH groups and, hence, the surface termination at a mica surface, providing a means to investigate how -OH groups influence molecular adsorption and better understand mica stacking-sequences and physical behavior.

Direct Observation of the Orientational Anisotropy of Buried Hydroxyl Groups inside Muscovite Mica.

We grew binary PbSe nanowires in an in situ gas-heating cell in a transmission electron microscope and elucidated species dependent mass transport pathways and key correlations among supersaturation, nucleation, and growth kinetics, thereby enabling morphological and compositional control of nanowires with tailored properties.

In situ characterization of kinetics and mass transport of PbSe nanowire growth via LS and VLS mechanisms.

Water vapor binding to metal oxide surfaces produces thin water films with properties controlled by interactions with surface hydroxo sites. Hydrogen bonding populations vary across films and induce different molecular orientations than at the surface of liquid water. Identifying these differences can open possibilities for tailoring film-mediated catalytic reactions by choice of the supporting metal oxide substrate.

Hydrogen bonding and molecular orientations across thin water films on sapphire.

When hydrolyzable cations such as aluminum interact with solid-water interfaces, macroscopic interfacial properties (., surface charge and potential) and interfacial phenomena (., particle adhesion) become tightly linked with the microscopic details of ion adsorption and speciation. We use  atomic force microscopy to directly image individual aluminum ions at a mica-water interface and show how adsorbate populations change with pH and aluminum activity. Complementary streaming potential measurements then allow us to build a triple layer model (TLM) that links surface potentials to adsorbate populations, via equilibrium binding constants. Our model predicts that hydrolyzed species dominate the mica-water interface, even when unhydrolyzed species dominate the solution.  molecular dynamics (AIMD) simulations confirm that aluminum hydrolysis is strongly promoted at the interface. The TLM indicates that hydrolyzed adsorbates are responsible for surface-potential inversions, and we find strong correlations between hydrolyzed adsorbates and particle-adhesion forces, suggesting that these species mediate adhesion by chemical bridging.

Visualization of Aluminum Ions at the Mica Water Interface Links Hydrolysis State-to-Surface Potential and Particle Adhesion.

Knowledge of the occurrences of water films on minerals is critical for global biogeochemical and atmospheric processes, including element cycling and ice nucleation. The underlying mechanisms controlling water film growth are, however, misunderstood. Using infrared nanospectroscopy, amplitude-modulated atomic force microscopy, and molecular simulations, we show how water films grow from water vapor on hydrophilic mineral nanoparticles. We imaged films with up to four water layers that grow anisotropically over a single face. Growth usually begins from the near edges of a face where defects preferentially capture water vapor. Thicker films produced by condensation cooling completely engulf nanoparticles and form thicker menisci over defects. The high surface tension of water smooths film surfaces and produces films of inhomogeneous thickness. Nanoscale topography and film surface energy thereby control anisotropic distributions and thicknesses of water films on hydrophilic mineral nanoparticles.

Direct observation of anisotropic growth of water films on minerals driven by defects and surface tension.

Crystallization by particle attachment (CPA) is a frequently occurring mechanism of colloidal crystallization that results in hierarchical morphologies. CPA has been exploited to create nanomaterials with unusual properties and is implicated in the development of complex mineral textures. Oriented attachment-a form of CPA in which particles align along specific crystallographic directions-produces mesocrystals that diffract as single crystals do, although the constituent particles are still discernible. The conventional view of CPA is that nucleation provides a supply of particles that aggregate via Brownian motion biased by attractive interparticle potentials. However, mesocrystals often exhibit regular morphologies and uniform sizes. Although many crystal systems form mesocrystals and individual attachment events have been directly visualized, how random attachment events lead to well defined, self-similar morphologies remains unknown, as does the role of surface-bound ligands, which are ubiquitous in nanoparticle systems. Attempts to understand mesocrystal formation are further complicated in many systems by the presence of precursor nanoparticles with a phase distinct from that of the bulk. Some studies propose that such particles convert before attachment, whereas others attribute conversion to the attachment process itself and yet others conclude that transformation occurs after the mesocrystals exceed a characteristic size. Here we investigate mesocrystal formation by iron oxides, which are important colloidal phases in natural environments and classic examples of systems forming ubiquitous precursor phases and undergoing CPA accompanied by phase transformations. Combining in situ transmission electron microscopy (TEM) at 80 degrees Celsius with 'freeze-and-look' TEM, we tracked the formation of haematite (Hm) mesocrystals in the presence of oxalate (Ox), which is abundant in soils, where iron oxides are common. We find that isolated Hm particles rarely appear, but once formed, interfacial gradients at the Ox-covered surfaces drive Hm particles to nucleate repeatedly about two nanometres from the surfaces, to which they then attach, thereby generating mesocrystals. Comparison to natural and synthetic systems suggests that interface-driven pathways are widespread.

Benjamin A. Legg

Physical and Computational Sciences Directorate

Pacific Northwest National Laboratory

Visualizing Solution Structure at Solid-Liquid Interfaces using Three-Dimensional Fast Force Mapping

Benjamin A. Legg

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}Physical and Computational Sciences Directorate

Pacific Northwest National Laboratory

Visualizing Solution Structure at Solid-Liquid Interfaces using Three-Dimensional Fast Force Mapping

Physical and Computational Sciences Directorate