Drosophila Y-maze Assay: A Method to Assess Olfactory Responses in Flies

Protocolo

This protocol text is an excerpt from Simonnet et al., Testing Drosophila Olfaction with a Y-maze Assay, J. Vis. Exp. (2014).

1. Before Starting

1. Use an isogenized reference stock bearing stable and robust behavioral phenotypes. There is no general rule for choosing this stock, since all potential controls may carry heterogeneous background alleles.
2. Use this control strain to backcross every other stock necessary for later steps. This backcrossing step is typically represented by at least 5 successive crosses of a single virgin female (to allow possible crossing-over between homologous chromosomes) to 2–3 isogenic reference males. This step is important to homogenize the genetic background between the different fly stocks.
3. Maintain Drosophila stocks on a standard corn flour (9%), yeast (10%), and agar medium (1.5%) complemented with antibiotic (0.4% methyl para-hydroxy-benzoate) in a 12-hr light/dark cycle at 25 °C.
4. Achieve chemosensory experiments in a temperature-controlled room (25 °C) under far red light (to eliminate the contribution of visual cues, and to focus on chemosensory signals). Regularly renew the air of the room to ventilate the area between each experiment.

2. Olfactory Response using a Y-maze Assay

1. Starve the flies for 16–18 hr at 25 °C in glass tubes containing wet paper towel before testing.
2. Join a Y-shape connector to two glass vials and to a smaller plastic vial (loading vial). Use 1 ml pipette tips that pass through the foam stoppers to link the connector to the three vials, and to obtain a tightly sealed Y-maze. Cut the narrow ends of two pipette tips (~2 mm diameter, to avoid any return of the fly once it has made its decision) to form two "trap" vials, and a large end of one pipette tip to form the "loading" tube (Figure 1A).
3. Just before connecting the "trap" vials (Figure 1B), place one ~6 mm diameter filter paper in each vial. Add 40 μl of odorant solution on one filter paper, and 40 μl of the corresponding solvent on the second filter paper.
4. Introduce ten 4 to 9 day-old flies into the "loading" vial. Do not use CO₂ anesthesia during this transfer, since it has a strong effect on behavior. Rather use brief cooling on ice. Proper manipulation of anaesthetized flies is important to limit stress on the subjects as much as possible.
   1. Perform a series of Y-maze tests at 25 °C under far-red light (using LED bulbs to limit possible heating source) to avoid visual stimuli as much as possible. Be careful to alternate the orientations of the Y-mazes (odorant containing tube on the left, or on the right, and loading tube in front or in the back; Figure 1C).
   2. Allow several hours for the flies to enter in the trap vial containing the odorant or the solvent. Count flies after 24 hr to increase the participation up to more than 80% and provide the maximum olfactory index value (Simonnet, personal communication).
   3. Calculate the resulting olfactory index using the following formula: (number in the odor tube - number in the solvent tube)/total number of loaded flies.
5. Wash Y-maze set-up as follows: soak the dismantled set-up in RBS 35 MD overnight. Thoroughly rinse out with tap water. Finally rinse with deionized water and let dry out.

3. Statistical Analysis of the Data

1. Perform a t-test, a one-way ANOVA or a two-way ANOVA depending on data and variables.

Resultados

Figure 1: Male olfactory response assessed with a Y-maze set-up. A) Split device. B) Assembled device. C) Set-up in working condition under far-red light. D) Quantification of male olfactory responses toward acetic acid (AA) or phenylacetic acid (PAA) both diluted in distilled water (10% v/v) (N = 11, representing a total of 110 flies). Statistical a...

Materiales

Name	Company	Catalog Number	Comments
Drosophila Polystyrene tube	VWR europe	734-2255	30 x 25 mm Y-maze
Drosophila Borosilicate tube	Dijon verre		95 X 25 mm Y-maze
Foam stopper	Dutscher	999038	Y-maze
Y-shaped connector	Europrix	11020605	Y-maze
100-1,000 µl pipette tips	Corning	4868	Join the following pipette tips to the Y-shaped connector. Cut 2 pipette tips at 65 mm from the wide end, and connect the narrow end (with a ~2 mm opening) to 2 test vials. These openings will limit the U-turns once the flies enter the tubes containing the odors. Cut 1 pipette tip at 35 mm from the wide end, and connect it to the loading vial.
Far-Red LED Bulb	Rubin-Lacaque	0RB180238	625-630 nm
Acetic Acid	Sigma-Aldrich	45725
Phenylacetic Acid	Sigma-Aldrich	P16621
Yeast	Sensient Flavors Strasbourg	1018880464
Cornmeal	eurogerm	Farine de maïs
Agar	Kalys	HP-697-25
Methyl hydroxy 4 benzoate	VWR international	25605293