Reconocemos útiles consejos de Mingzhai Sol en las células de la unión a las superficies. Agradecemos a Ned Wingreen y Gitai Zemer valiosa para los debates. Esta investigación fue financiada por los Institutos Nacionales de Salud de subvención P50GM07150, premio Nacional de Ciencias CARRERA Fundación PHY-0844466 y la Fundación Alfred P. Sloan.

<ol><li> Se cultivan las células de E. coli en caldo Luria-beltrani (LB) para la fase exponencial (OD = 0.2-0.4). </li><li> Mantener el cultivo en LB suplementado con 50 mg / ml de cefalexina durante 15 minutos para inducir el crecimiento de filamentosas, y luego se concentran la cultura por 5 veces por centrifugación. </li><li> Hacer PEI cubreobjetos recubiertos por las corrientes de 1% polietilenimina diluida en agua en una cámara de flujo, y lavar con agua después de una incubación de 5 minutos. </li><li> El flujo del cultivo de células concentradas en la cámara, y se lava con una mezcla de LB y cefalexina (50μg/mL) después de 3 minutos para eliminar las células sueltas. </li><li> Incubar la cámara a 37 ° C durante 30 minutos a 1 hora para permitir que las células adjunto crecer antes de colocarlo en el instrumento de captura óptica. </li><li> Hacer polilisina revestida de piedras mediante la incubación de 0,5 m de diámetro, bolas de poliestireno (Laboratorios explosiones) en el 0,1% de polilisina diluido en agua durante 30 minutos. Luego lave las cuentas 3 veces y se resuspenden en agua. </li><li> Diluir la solución de cuentas por un factor de dos en LB con cefalexina (50μg/mL), y agregarlo a la cámara de flujo. </li><li> Ópticamente una trampa flotante de cuentas y el tacto a la extremidad libre de una célula. (Nosotros usamos un Mad City Laboratorios etapa piezoeléctricos para el control del movimiento de la muestra.) Cuando una combinación adecuada de cuentas / célula se encuentra, lavar la cámara con cefalexina en LB (50μg/mL) para eliminar las perlas sueltas. </li><li> Ejecutar custom-written programa LabView para aplicar las fuerzas de flexión a la celda y registrar los datos de fuerza-desplazamiento. Detalles del programa <ol class="lalpha"><li> Calibrar la respuesta del detector de barrido de exploración que se adjunta en el cordón de rayo láser de detección y registro de las señales de tensión en 3D PSD. </li><li> Identificar el eje de células largas a la imagen de microscopio. </li><li> Mover celdas en los pasos en una dirección perpendicular al eje de la célula de largo. </li><li> Registrar la distancia recorrida y el desplazamiento de la trampa óptica. </li><li> Convertir el desplazamiento a la fuerza aplicada con la rigidez trampa medido previamente y guardar desplazamiento de su punta y la fuerza de archivo. </li></ol></li></ol> Secretos para el éxito: En el paso 8), se necesita encontrar una celda con un fin bien definido atascado. Algunas células son atrapados en un extremo, y la fuerza de flexión en la otra punta lleva a un giro de células enteras en lugar de doblar. Un par adecuado se encuentra al doblar cada célula rápidamente a mano con el movimiento etapa joystick controlado. Los resultados representativos: <img src="/files/ftp_upload/2012/2012fig1.jpg" alt="Figura 1" /> Figura 1. Esta figura muestra de fuerza-desplazamiento de datos para una sola celda. La pendiente de esta línea es la rigidez a la flexión de la célula.

<ol>
	<li>Janmey, P. A., McCulloch, C. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cell+mechanics:+integrating+cell+responses+to+mechanical+stimuli.">Cell mechanics: integrating cell responses to mechanical stimuli.</a> Annu Rev Biomed Eng. 9, 1-34 (2007).</li><li>Morris, D. M., Jensen, G. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Toward+a+biomechanical+understanding+of+whole+bacterial+cells.">Toward a biomechanical understanding of whole bacterial cells.</a> Annu Rev Biochem. 77, 583-613 (2008).</li></ol>

El protocolo que aquí se presenta está diseñado para medir cuantitativamente las propiedades de flexión de las células bacterianas. El montaje del experimento se puede aplicar a cualquier celda en forma de bastón que se puede hacer para crecer filamentously. Hemos utilizado con éxito este programa de instalación para investigar los efectos de los filamentos del citoesqueleto en la resistencia a la flexión de la E. células de E. coli. Esta misma técnica se puede utilizar para evaluar el papel de la presión, la rigidez de la pared celular y otros componentes intracelulares en la determinación de la rigidez general de la flexión de las células.

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">	
		
		<div>
		<table border="1">
		<thead>
		<tr>
		<th>Material Name</th>
		<th>Type</th>
		<th>Company</th>
		<th>Catalogue Number</th>
		<th>Comment</th>
		</tr>
		</thead>
		<tbody>
		
<tr>
<td>cephalexin</td>
<td>&nbsp;</td>
<td>Sigma</td>
<td>C4895-5G</td>
<td>&nbsp;</td>
<tr>
<td>polyethylenimine</td>
<td>&nbsp;</td>
<td>Sigma</td>
<td>181978-5G</td>
<td>&nbsp;</td>
<tr>
<td>polylysine</td>
<td>&nbsp;</td>
<td>Sigma</td>
<td>P8920</td>
<td>&nbsp;</td>
<tr>
<td>0.5-&mu;m-diameter polystyrene beads</td>
<td>&nbsp;</td>
<td>Bangs Laboratory</td>
<td>PS03N</td>
<td>&nbsp;</td>
<tr>
<td>Nano-LP Series nanopositioning system</td>
<td>&nbsp;</td>
<td>Mad City Labs</td>
<td>NanoLP series</td>
<td><a href="http://www.madcitylabs.com/nanolpseries.html">http://www.madcitylabs.com/nanolpseries.html</a></td>
</tr>		</tbody>
		</table>
		</div>

measuring the bending stiffness of bacterial cells using an optical trap

Hemos desarrollado un protocolo para medir la rigidez a la flexión de filamentos en forma de bacilos. Las fuerzas se aplican con una trampa óptica, un microscopio tridimensional primavera hecha de luz que se forma cuando un haz de alta intensidad de láser se enfoca a un lugar muy pequeño por la lente de objetivo de un microscopio. Para doblar una célula, lo primero que se unen las bacterias vivas a un cubreobjetos tratados químicamente. A medida que estas células crecen, la mitad de las células permanece fijo en la cubreobjetos pero los extremos cada vez están libres de esta restricción. Al inducir el crecimiento de filamentosas con la cefalexina de drogas, que son capaces de identificar las células en el que estaba atrapado uno de los extremos de la célula a la superficie, mientras que el otro extremo quedó suelto y susceptible a las fuerzas de flexión. A fuerza de flexión se aplica con una trampa óptica por un cordón de unión polilisina recubiertos en la punta de una célula que crece. Tanto la fuerza y ​​el desplazamiento de la cuenta se registran y la rigidez a la flexión de la célula es la pendiente de esta relación.

Watch this Scientific Journal Video about Measuring the Bending Stiffness of Bacterial Cells Using an Optical Trap at JoVE.com

Measuring the Bending Stiffness of Bacterial Cells Using an Optical Trap

Se presenta un protocolo para doblar las células filamentosas bacterianas unidas a una superficie cubierta antideslizante con una trampa óptica para medir la resistencia a la flexión celular.

La medición de la resistencia a la flexión de las células bacterianas usando una trampa óptica

We developed a protocol to measure the bending rigidity of filamentous rod-shaped bacteria. Forces are applied with an optical trap, a microscopic ...

measuring-bending-stiffness-bacterial-cells-using-an-optical

Research

JoVE Journal

Biology

12.0K vistas.  Princeton University. Se presenta un protocolo para doblar las células filamentosas bacterianas unidas a una superficie cubierta antideslizante con una trampa óptica para medir la resistencia a la flexión celular.

Video: Measuring the Bending Stiffness of Bacterial Cells Using an Optical Trap

Proper Care and Cleaning of the Microscope

Keeping the microscope optics clean is important for high-quality imaging. Dust, fingerprints, excess immersion oil, or mounting medium on or in a microscope causes reduction in contrast and resolution. DIC is especially sensitive to contamination and scratches on the lens surfaces. This protocol details the procedure for keeping the microscope clean.

Keeping the microscope optics clean is important for high-quality imaging. Dust, fingerprints, excess immersion oil, or mounting medium on or in a microscope causes reduction in contrast and resolution. DIC is especially sensitive to contamination and scratches on the lens surfaces. This protocol details the procedure for keeping the microscope clean.

Limpieza y cuidado apropiado del microscopio

Keeping the microscope optics clean is important for high-quality imaging. Dust, fingerprints, excess immersion oil, or mounting medium on or in a ...

Investigación

Biología

Major Components of the Light Microscope

The light microscope is a basic tool for the cell biologist, who should have a thorough understanding of how it works, how it should be aligned for different applications, and how it should be maintained as required to obtain maximum image-forming capacity and resolution. The components of the microscope are described in detail here.

The light microscope is a basic tool for the cell biologist, who should have a thorough understanding of how it works, how it should be aligned for different applications, and how it should be maintained as required to obtain maximum image-forming capacity and resolution. The components of the microscope are described in detail here.

Los componentes principales del microscopio de luz

The light microscope is a basic tool for the cell biologist, who should have a thorough understanding of how it works, how it should be aligned for ...

Electron Cryotomography of Bacterial Cells

While much is already known about the basic metabolism of bacterial cells, many fundamental questions are still surprisingly unanswered, including for instance how they generate and maintain specific cell shapes, establish polarity, segregate their genomes, and divide. In order to understand these phenomena, imaging technologies are needed that bridge the resolution gap between fluorescence light microscopy and higher-resolution methods such as X-ray crystallography and NMR spectroscopy.
Electron cryotomography (ECT) is an emerging technology that does just this, allowing the ultrastructure of cells to be visualized in a near-native state, in three dimensions (3D), with "macromolecular" resolution (~4nm).1, 2 In ECT, cells are imaged in a vitreous, "frozen-hydrated" state in a cryo transmission electron microscope (cryoTEM) at low temperature (&lt; -180&deg;C). For slender cells (up to ~500 nm in thickness3), intact cells are plunge-frozen within media across EM grids in cryogens such as ethane or ethane/propane mixtures. Thicker cells and biofilms can also be imaged in a vitreous state by first "high-pressure freezing" and then, "cryo-sectioning" them. A series of two-dimensional projection images are then collected through the sample as it is incrementally tilted along one or two axes. A three-dimensional reconstruction, or "tomogram" can then be calculated from the images. While ECT requires expensive instrumentation, in recent years, it has been used in a few labs to reveal the structures of various external appendages, the structures of different cell envelopes, the positions and structures of cytoskeletal filaments, and the locations and architectures of large macromolecular assemblies such as flagellar motors, internal compartments and chemoreceptor arrays.1, 2
In this video article we illustrate how to image cells with ECT, including the processes of sample preparation, data collection, tomogram reconstruction, and interpretation of the results through segmentation and in some cases correlation with light microscopy.

We illustrate here how to use electron cryotomography (ECT) to study the ultrastructure of bacterial cells in near-native states, to "macromolecular" (~4 nm) resolution.

Electron Cryotomography de las células bacterianas

While much is already known about the basic metabolism of bacterial cells, many fundamental questions are still surprisingly unanswered, including for ...

Studying the Effects of Matrix Stiffness on Cellular Function using Acrylamide-based Hydrogels

Tissue stiffness is an important determinant of cellular function, and changes in tissue stiffness are commonly associated with fibrosis, cancer and cardiovascular disease1-11. Traditional cell biological approaches to studying cellular function involve culturing cells on a rigid substratum (plastic dishes or glass coverslips) which cannot account for the effect of an elastic ECM or the variations in ECM stiffness between tissues. To model in vivo tissue compliance conditions in vitro, we and others use ECM-coated hydrogels. In our laboratory, the hydrogels are based on polyacrylamide which can mimic the range of tissue compliances seen biologically12. "Reactive" cover slips are generated by incubation with NaOH followed by addition of 3-APTMS. Glutaraldehyde is used to cross-link the 3-APTMS and the polyacrylamide gel. A solution of acrylamide (AC), bis-acrylamide (Bis-AC) and ammonium persulfate is used for the polymerization of the hydrogel. N-hydroxysuccinimide (NHS) is incorporated into the AC solution to crosslink ECM protein to the hydrogel. Following polymerization of the hydrogel, the gel surface is coated with an ECM protein of choice such as fibronectin, vitronectin, collagen, etc.
The stiffness of a hydrogel can be determined by rheology or atomic force microscopy (AFM) and adjusted by varying the percentage of AC and/or bis-AC in the solution12. In this manner, substratum stiffness can be matched to the stiffness of biological tissues which can also be quantified using rheology or AFM. Cells can then be seeded on these hydrogels and cultured based upon the experimental conditions required. Imaging of the cells and their recovery for molecular analysis is straightforward. For this article, we define soft substrata as those having elastic moduli (E) &lt;3000 Pascal and stiff substrata/tissues as those with E &gt;20,000 Pascal.

The effect of substrata stiffness on cellular function can be modeled in vitro using polyacrylamide hydrogels of varying compliances.

El estudio de los efectos de la matriz de rigidez en la función celular usando como base la acrilamida-hidrogeles

Tissue stiffness is an important determinant of cellular function, and changes in tissue stiffness are commonly associated with fibrosis, cancer and ...

An Assay for Measuring the Activity of Escherichia coli Inducible Lysine Decarboxyase

Escherichia coli is an enteric bacterium that is capable of growing over a wide range of pH values (pH 5 - 9)1 and, incredibly, is able to survive extreme acid stresses including passage through the mammalian stomach where the pH can fall to as low as pH 1 - 22. To enable such a broad range of acidic pH survival, E. coli possesses four different inducible amino acid decarboxylases that decarboxylate their substrate amino acids in a proton-dependent manner thus raising the internal pH. The decarboxylases include the glutamic acid decarboxylases GadA and GadB3, the arginine decarboxylase AdiA4, the lysine decarboxylase LdcI5, 6 and the ornithine decarboxylase SpeF7. All of these enzymes utilize pyridoxal-5'-phospate as a co-factor8 and function together with inner-membrane substrate-product antiporters that remove decarboxylation products to the external medium in exchange for fresh substrate2. In the case of LdcI, the lysine-cadaverine antiporter is called CadB. Recently, we determined the X-ray crystal structure of LdcI to 2.0 &#197;, and we discovered a novel small-molecule bound to LdcI the stringent response regulator guanosine 5'-diphosphate,3'-diphosphate (ppGpp) 14. The stringent response occurs when exponentially growing cells experience nutrient deprivation or one of a number of other stresses9. As a result, cells produce ppGpp which leads to a signaling cascade culminating in the shift from exponential growth to stationary phase growth10. We have demonstrated that ppGpp is a specific inhibitor of LdcI 14. Here we describe the lysine decarboxylase assay, modified from the assay developed by Phan et al.11, that we have used to determine the activity of LdcI and the effect of pppGpp/ppGpp on that activity. The LdcI decarboxylation reaction removes the &alpha;-carboxy group of L-lysine and produces carbon dioxide and the polyamine cadaverine (1,5-diaminopentane)5. L-lysine and cadaverine can be reacted with 2,4,6-trinitrobenzensulfonic acid (TNBS) at high pH to generate N,N'-bistrinitrophenylcadaverine (TNP-cadaverine) and N,N&#8242;-bistrinitrophenyllysine (TNP-lysine), respectively11. The TNP-cadaverine can be separated from the TNP-lysine as the former is soluble in organic solvents such as toluene while the latter is not (See Figure 1). The linear range of the assay was determined empirically using purified cadaverine.

An Assay for Measuring the Activity of Escherichia coli Inducible Lysine Decarboxyase

The activity of the inducible lysine decarboxylase is monitored by reacting the substrate L-lysine and the product cadaverine with 2,4,6-trinitrobenzensulfonic acid to form adducts that have differential solubility in toluene.

Un ensayo para medir la actividad de Escherichia coli Inducible lisina Decarboxyase

Escherichia coli is an enteric bacterium that is capable of growing over a wide range of pH values (pH 5 - 9)1 and, incredibly, is able to survive extreme ...

Measuring the Kinetics of mRNA Transcription in Single Living Cells

The transcriptional activity of RNA polymerase II (Pol II) is a dynamic process and therefore measuring the kinetics of the transcriptional process in vivo is of importance. Pol II kinetics have been measured using biochemical or molecular methods.1-3 In recent years, with the development of new visualization methods, it has become possible to follow transcription as it occurs in real time in single living cells.4 Herein we describe how to perform analysis of Pol II elongation kinetics on a specific gene in living cells.5, 6 Using a cell line in which a specific gene locus (DNA), its mRNA product, and the final protein product can be fluorescently labeled and visualized in vivo, it is possible to detect the actual transcription of mRNAs on the gene of interest.7, 8 The mRNA is fluorescently tagged using the MS2 system for tagging mRNAs in vivo, where the 3'UTR of the mRNA transcripts contain 24 MS2 stem-loop repeats, which provide highly specific binding sites for the YFP-MS2 coat protein that labels the mRNA as it is transcribed.9 To monitor the kinetics of transcription we use the Fluorescence Recovery After Photobleaching (FRAP) method. By photobleaching the YFP-MS2-tagged nascent transcripts at the site of transcription and then following the recovery of this signal over time, we obtain the synthesis rate of the newly made mRNAs.5 In other words, YFP-MS2 fluorescence recovery reflects the generation of new MS2 stem-loops in the nascent transcripts and their binding by fluorescent free YFP-MS2 molecules entering from the surrounding nucleoplasm. The FRAP recovery curves are then analyzed using mathematical mechanistic models formalized by a series of differential equations, in order to retrieve the kinetic time parameters of transcription.

RNA polymerase II transcriptional kinetics are measured on specific genes in living cells. mRNAs transcribed from the gene of interest are fluorescently tagged and using Fluorescence Recovery After Photobleaching (FRAP) the in vivo kinetics of transcriptional elongation are obtained.

La medición de la cinética de la transcripción de ARNm en las células vivas solo

The transcriptional activity of RNA polymerase II (Pol II) is a dynamic process and therefore measuring the kinetics of the transcriptional process in ...

Measuring the Effects of Bacteria on C. Elegans Behavior Using an Egg Retention Assay

C. elegans egg-laying behavior is affected by environmental cues such as osmolarity1 and vibration2. In the total absence of food C. elegans also cease egg-laying and retain fertilized eggs in their uterus3. However, the effect of different sources of food, especially pathogenic bacteria and particularly Enterococcus faecalis, on egg-laying
	behavior is not well characterized. The egg-in-worm (EIW) assay is a useful tool to quantify the effects of different types of bacteria, in this case E. faecalis, on egg- laying behavior.
	
	EIW assays involve counting the number of eggs retained in the uterus of C. elegans4. The EIW assay involves bleaching staged, gravid adult C. elegans to remove the cuticle and separate the retained eggs from the animal. Prior to bleaching, worms are exposed to bacteria (or any type of environmental cue) for a fixed period of time. After bleaching, one is very easily able to count the number of eggs retained inside the uterus of the worms. In this assay, a quantifiable increase in egg retention after E. faecalis exposure can be easily measured. The EIW assay is a behavioral assay that may be used to screen for potentially pathogenic bacteria or the presence of environmental toxins. In addition, the EIW assay may be a tool to screen for drugs that affect neurotransmitter signaling since egg-laying behavior is modulated by neurotransmitters such as serotonin and acetylcholine5-9.

Measuring the Effects of Bacteria on C. Elegans Behavior Using an Egg Retention Assay

An egg-in-worm (EIW) assay is a useful method to quantify egg-laying behavior. Alterations in egg laying can be a behavioral response of the model organism Caenorhabditis elegans to potentially harmful environmental substances such as those produced by pathogenic bacteria.

Medición de los efectos de las bacterias en<em&gt; C. Elegans</em&gt; Comportamiento El uso de un ensayo de retención de huevo

C. elegans egg-laying behavior is  affected by environmental cues such as osmolarity1 and  vibration2. In the total absence of food C. elegans also cease ...

Measuring the Osmotic Water Permeability Coefficient (Pf) of Spherical Cells: Isolated Plant Protoplasts as an Example

Studying AQP regulation mechanisms is crucial for the understanding of water relations at both the cellular and the whole plant levels. Presented here is a simple and very efficient method for the determination of the osmotic water permeability coefficient (Pf) in plant protoplasts, applicable in principle also to other spherical cells such as frog oocytes. The first step of the assay is the isolation of protoplasts from the plant tissue of interest by enzymatic digestion into a chamber with an appropriate isotonic solution. The second step consists of an osmotic challenge assay: protoplasts immobilized on the bottom of the chamber are submitted to a constant perfusion starting with an isotonic solution and followed by a hypotonic solution. The cell swelling is video recorded. In the third step, the images are processed offline to yield volume changes, and the time course of the volume changes is correlated with the time course of the change in osmolarity of the chamber perfusion medium, using a curve fitting procedure written in Matlab (the &#8216;PfFit&#8217;), to yield Pf.

Measuring the Osmotic Water Permeability Coefficient Pf of Spherical Cells: Isolated Plant Protoplasts as an Example

Measuring the osmotic water permeability coefficient (Pf) of cells can help understand the regulatory mechanisms of aquaporins (AQPs). Pf determination in spherical plant cell protoplasts presented here involves protoplasts isolation and numerical analysis of their initial rate of volume change as a result of an osmotic challenge during constant bath perfusion.

Medición de la osmótica de agua Coeficiente de Permeabilidad (P<sub&gt; F</sub&gt;) De células esféricas: protoplastos de plantas aisladas como ejemplo

Studying AQP regulation mechanisms is crucial for the understanding of water relations at both the cellular and the whole plant levels. Presented here is ...

Sequential Application of Glass Coverslips to Assess the Compressive Stiffness of the Mouse Lens: Strain and Morphometric Analyses

The eye lens is a transparent organ that refracts and focuses light to form a clear image on the retina. In humans, ciliary muscles contract to deform the lens, leading to an increase in the lens&#39; optical power to focus on nearby objects, a process known as accommodation. Age-related changes in lens stiffness have been linked to presbyopia, a reduction in the lens&#39; ability to accommodate, and, by extension, the need for reading glasses. Even though mouse lenses do not accommodate or develop presbyopia, mouse models can provide an invaluable genetic tool for understanding lens pathologies, and the accelerated aging observed in mice enables the study of age-related changes in the lens. This protocol demonstrates a simple, precise, and cost-effective method for determining mouse lens stiffness, using glass coverslips to apply sequentially increasing compressive loads onto the lens. Representative data confirm that mouse lenses become stiffer with age, like human lenses. This method is highly reproducible and can potentially be scaled up to mechanically test lenses from larger animals.

Age-related increases in eye lens stiffness are linked to presbyopia. This protocol describes a simple, cost-effective method for measuring mouse lens stiffness. Mouse lenses, like human lenses, become stiffer with age. This method is precise and can be adapted for lenses from larger animals.

La aplicación secuencial de cubreobjetos de vidrio para evaluar la compresión Rigidez de la lente del ratón: tensión y el análisis morfométricos

The eye lens is a transparent organ that refracts and focuses light to form a clear image on the retina. In humans, ciliary muscles contract to deform the ...

Measuring the Stiffness of Ex Vivo Mouse Aortas Using Atomic Force Microscopy

Arterial stiffening is a significant risk factor and biomarker for cardiovascular disease and a hallmark of aging. Atomic force microscopy (AFM) is a versatile analytical tool for characterizing viscoelastic mechanical properties for a variety of materials ranging from hard (plastic, glass, metal, etc.) surfaces to cells on any substrate. It has been widely used to measure the stiffness of cells, but less frequently used to measure the stiffness of aortas. In this paper, we will describe the procedures for using AFM in contact mode to measure the ex vivo elastic modulus of unloaded mouse arteries. We describe our procedure for isolation of mouse aortas, and then provide detailed information for the AFM analysis. This includes step-by-step instructions for alignment of the laser beam, calibration of the spring constant and deflection sensitivity of the AFM probe, and acquisition of force curves. We also provide a detailed protocol for data analysis of the force curves.

Measuring the Stiffness of Ex Vivo Mouse Aortas Using Atomic Force Microscopy

We present detailed protocols for isolation of aortas from mouse and measurement of their elastic modulus using atomic force microscopy.

La medición de la rigidez de<em&gt; Ex Vivo</em&gt; Ratón aortas Usando microscopía de fuerza atómica

Arterial stiffening is a significant risk factor and biomarker for cardiovascular disease and a hallmark of aging. Atomic force microscopy (AFM) is a ...