The research and development leading to the above described vibration test was funded by the European Research Council (ERC, ADG 294678) and the German Research Council (grant, SFB665). Thanks go to the Max-Delbr&#252;ck-Center technical and support staff, Mr. R. Fischer, B. Neumann, and Mr. M. Pflaume, who provided invaluable assistance with the project.

The testing protocol was approved by the Charit&#233;-Universit&#228;tsmedizin Ethics Committee.
1. Vibration Detection Threshold (VDT)
<ol>
	<li>Device and Testing Protocol Assembly&#160;&#8211; Pretesting
	<ol>
		<li>Assemble the components of the device according to Figure 1A. Place a smooth-surfaced board (40 cm x 80 cm) on a table. Place the brass bar on the board.</li>
		<li>Connect the piezoelectric actuator (vibration stimulator) to the controller unit.</li>
		<li>Connect the response bo...

<ol>
	<li>Poole, K., Herget, R., Lapatsina, L., Ngo, H. D., Lewin, G. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Tuning+Piezo+ion+channels+to+detect+molecular-scale+movements+relevant+for+fine+touch.">Tuning Piezo ion channels to detect molecular-scale movements relevant for fine touch.</a> Nat Commun. 5, 3520 (2014).</li><li>Lechner, S. G., Lewin, G. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Hairy+sensation.">Hairy sensation.</a> Physiology (Bethesda). 28 (3), 142-150 (2013).</li><li>Heidenreich, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=KCNQ4+K(+)+channels+tune+mechanoreceptors+for+normal+touch+sensation+in+mouse+and+man.">KCNQ4 K(+) channels tune mechanoreceptors for normal touch sensation in mouse and man.</a> Nat Neurosci. 15 (1), 138-145 (2012).</li><li>Mountcastle, V. B., Talbot, W. H., Darian-Smith, I., Kornhuber, H. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Neural+basis+of+the+sense+of+flutter-vibration.">Neural basis of the sense of flutter-vibration.</a> Science. 155 (3762), 597-600 (1967).</li><li>Bolanowski, S. J., Gescheider, G. A., Verrillo, R. T., Checkosky, C. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Four+channels+mediate+the+mechanical+aspects+of+touch.">Four channels mediate the mechanical aspects of touch.</a> J. Acoust. Soc. Am. 84 (5), 1680-1694 (1988).</li><li>Johansson, R. S., Vallbo, A. A. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Detection+of+tactile+stimuli.+Thresholds+of+afferent+units+related+to+psychophysical+thresholds+in+the+human+hand.">Detection of tactile stimuli. Thresholds of afferent units related to psychophysical thresholds in the human hand.</a> J Physiol. 297 (1), 405-422 (1979).</li><li>Frenzel, H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+Genetic+Basis+for+Mechanosensory+Traits+in+Humans.">A Genetic Basis for Mechanosensory Traits in Humans.</a> PLoS Biol. 10 (5), (2012).</li><li>Van Boven, R. W., Johnson, K. O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+limit+of+tactile+spatial+resolution+in+humans:+grating+orientation+discrimination+at+the+lip,+tongue,+and+finger.">The limit of tactile spatial resolution in humans: grating orientation discrimination at the lip, tongue, and finger.</a> Neurology. 44 (12), 2361-2366 (1994).</li><li>Haseleu, J., Omerba&#353;i&#263;, D., Frenzel, H., Gross, M., Lewin, G. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Water-induced+finger+wrinkles+do+not+affect+touch+acuity+or+dexterity+in+handling+wet+objects.">Water-induced finger wrinkles do not affect touch acuity or dexterity in handling wet objects.</a> PLoS ONE. 9 (1), e84949 (2014).</li><li>Bensmaia, S. J., Hsiao, S. S., Denchev, P. V., Killebrew, J. H., Craig, J. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+tactile+perception+of+stimulus+orientation.">The tactile perception of stimulus orientation.</a> Somatosens Mot Res. 25 (1), 49-59 (2008).</li><li>Poole, K., Moroni, M., Lewin, G. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Sensory+mechanotransduction+at+membrane-matrix+interfaces.">Sensory mechanotransduction at membrane-matrix interfaces.</a> Pflugers Arch. , (2014).</li><li>Schrenk-Siemens, K., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=PIEZO2+is+required+for+mechanotransduction+in+human+stem+cell-derived+touch+receptors.">PIEZO2 is required for mechanotransduction in human stem cell-derived touch receptors.</a> Nat. Neurosci. , (2014).</li><li>Woo, S. H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Piezo2+is+required+for+Merkel-cell+mechanotransduction.">Piezo2 is required for Merkel-cell mechanotransduction.</a> Nature. 509 (7502), 622-626 (2014).</li><li>Ranade, S. S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Piezo2+is+the+major+transducer+of+mechanical+forces+for+touch+sensation+in+mice.">Piezo2 is the major transducer of mechanical forces for touch sensation in mice.</a> Nature. 516 (7529), 121-125 (2014).</li><li>Wetzel, C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+stomatin-domain+protein+essential+for+touch+sensation+in+the+mouse.">A stomatin-domain protein essential for touch sensation in the mouse.</a> Nature. 445 (7124), 206-209 (2007).</li><li>McMillin, M. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mutations+in+PIEZO2+cause+Gordon+syndrome,+Marden-Walker+syndrome,+and+distal+arthrogryposis+type+5.">Mutations in PIEZO2 cause Gordon syndrome, Marden-Walker syndrome, and distal arthrogryposis type 5.</a> Am. J. Hum. Genet. 94 (5), 734-744 (2014).</li><li>Gandhi, M. S., Sesek, R., Tuckett, R., Bamberg, S. J. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Progress+in+vibrotactile+threshold+evaluation+techniques:+a+review.">Progress in vibrotactile threshold evaluation techniques: a review.</a> J Hand Ther. 24 (3), 240-255 (2011).</li><li>G&#252;&#231;l&#252;, B., Bolanowski, S. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Vibrotactile+thresholds+of+the+Non-Pacinian+I+channel:+I.+Methodological+issues.">Vibrotactile thresholds of the Non-Pacinian I channel: I. Methodological issues.</a> Somatosens Mot Res. 22 (1-2), 49-56 (2005).</li><li>Lindsell, C. J., Griffin, M. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Normative+vibrotactile+thresholds+measured+at+five+European+test+centres.">Normative vibrotactile thresholds measured at five European test centres.</a> Int Arch Occup Environ Health. 76 (7), 517-528 (2003).</li><li>Morioka, M., Griffin, M. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Dependence+of+vibrotactile+thresholds+on+the+psychophysical+measurement+method.">Dependence of vibrotactile thresholds on the psychophysical measurement method.</a> Int Arch Occup Environ Health. 75 (1-2), 78-84 (2002).</li><li>Tannan, V., Dennis, R., Tommerdahl, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+novel+device+for+delivering+two-site+vibrotactile+stimuli+to+the+skin.">A novel device for delivering two-site vibrotactile stimuli to the skin.</a> J. Neurosci. Methods. 147 (2), 75-81 (2005).</li><li>Zwislocki, J. J., Relkin, E. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=On+a+psychophysical+transformed-rule+up+and+down+method+converging+on+a+75%+level+of+correct+responses.">On a psychophysical transformed-rule up and down method converging on a 75% level of correct responses.</a> Proc. Natl. Acad. Sci. U.S.A. 98 (8), 4811-4814 (2001).</li><li>Gescheider, G. A., Bolanowski, S. J., Pope, J. V., Verrillo, R. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+four-channel+analysis+of+the+tactile+sensitivity+of+the+fingertip:+frequency+selectivity,+spatial+summation,+and+temporal+summation.">A four-channel analysis of the tactile sensitivity of the fingertip: frequency selectivity, spatial summation, and temporal summation.</a> Somatosens Mot Res. 19 (2), 114-124 (2002).</li><li>Kuroki, S., Watanabe, J., Nishida, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Contribution+of+within-+and+cross-channel+information+to+vibrotactile+frequency+discrimination.">Contribution of within- and cross-channel information to vibrotactile frequency discrimination.</a> Brain Res. 1529, 46-55 (2013).</li><li>Levitt, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Transformed+up-down+methods+in+psychoacoustics.">Transformed up-down methods in psychoacoustics.</a> J. Acoust. Soc. Am. 49 (2), (1971).</li><li>International Organization for Standardization. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mechanical+vibration-Vibrotactile+perception+thresholds+for+the+assessment+of+nerve+dysfunction-Part+1:+Methods+of+measurement+at+the+fingertips.">Mechanical vibration-Vibrotactile perception thresholds for the assessment of nerve dysfunction-Part 1: Methods of measurement at the fingertips.</a> ISO 13091-1. , (2001).</li><li>International Organization for Standardization. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mechanical+vibration-Vibrotactile+perception+thresholds+for+the+assessment+of+nerve+dysfunction-Part+2:+Analysis+and+interpretation+of+measurements+at+the+fingertips.">Mechanical vibration-Vibrotactile perception thresholds for the assessment of nerve dysfunction-Part 2: Analysis and interpretation of measurements at the fingertips.</a> ISO 13091-2. , (2003).</li><li>Holden, J. K., Nguyen, R. H., Francisco, E. M., Zhang, Z., Dennis, R. G., Tommerdahl, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+novel+device+for+the+study+of+somatosensory+information+processing.">A novel device for the study of somatosensory information processing.</a> J Neurosci Methods. 204 (2), 215-220 (2012).</li><li>G&#252;&#231;l&#252;, B., Oztek, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Tactile+sensitivity+of+children:+effects+of+frequency,+masking,+and+the+non-Pacinian+I+psychophysical+channel.">Tactile sensitivity of children: effects of frequency, masking, and the non-Pacinian I psychophysical channel.</a> J Exp Child Psychol. 98 (2), 113-130 (2007).</li><li>Cohen, J. C., Makous, J. C., Bolanowski, S. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Under+which+conditions+do+the+skin+and+probe+decouple+during+sinusoidal+vibrations?.">Under which conditions do the skin and probe decouple during sinusoidal vibrations?.</a> Exp Brain Res. 129 (2), 211-217 (1999).</li><li>Makous, J. C., Gescheider, G. A., Bolanowski, S. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+effects+of+static+indentation+on+vibrotactile+threshold.">The effects of static indentation on vibrotactile threshold.</a> J. Acoust. Soc. Am. 99 (5), 3149-3153 (1996).</li><li>Goldreich, D., Kanics, I. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Tactile+Acuity+is+Enhanced+in+Blindness.">Tactile Acuity is Enhanced in Blindness.</a> J. Neurosci. 23 (8), 3439-3445 (2003).</li><li>Peters, R. M., Goldreich, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Tactile+Spatial+Acuity+in+Childhood:+Effects+of+Age+and+Fingertip+Size.">Tactile Spatial Acuity in Childhood: Effects of Age and Fingertip Size.</a> PLoS One. 8 (12), (2013).</li><li>Tong, J., Mao, O., Goldreich, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Two-point+orientation+discrimination+versus+the+traditional+two-point+test+for+tactile+spatial+acuity+assessment.">Two-point orientation discrimination versus the traditional two-point test for tactile spatial acuity assessment.</a> Front Hum Neurosci. 7, 579 (2013).</li><li>Goldreich, D., Wong, M., Peters, R. M., Kanics, I. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+Tactile+Automated+Passive-Finger+Stimulator+(TAPS).">A Tactile Automated Passive-Finger Stimulator (TAPS).</a> J Vis Exp. (28), (2009).</li><li>Coste, B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Piezo+proteins+are+pore-forming+subunits+of+mechanically+activated+channels.">Piezo proteins are pore-forming subunits of mechanically activated channels.</a> Nature. 483 (7388), 176-181 (2012).</li><li>Martinez-Salgado, C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Stomatin+and+Sensory+Neuron+Mechanotransduction.">Stomatin and Sensory Neuron Mechanotransduction.</a> J Neurophysiol. 98 (6), 3802-3808 (2007).</li></ol>

The techniques used to evaluate VDT vary as to device specifications, hardware, and testing protocols. The International Organization for Standardization specifies the methods and procedures to analyze and interpret vibrotactile thresholds including recommendations for the various components of a vibrometer (ISO 13091-1 and 226,27) The described testing system abides to the relevant ISO recommendations for testing frequency range (4-125 Hz), method (variant of up-down staircase and forced choice), probe size (...

Specialized mechanosensory receptors in the skin mediate the perception of vibration and grating orientation. Each mechanosensory receptor type is tuned to detect distinct features of tactile stimuli1,2. This property provides the psychophysical basis for a differentiated assessment of mechanosensory function by using tests that deliver simple sinusoidal oscillations (vibration) or fine gratings. It is known that psychophysical thresholds for vibration perception are lower for high than low frequency vibration3,4. Two types of rapidly adapting mechanoreceptors associated with the Meissner and Pacinian corpuscles primarily detect low (10-40 Hz) and high (100-200 Hz) frequency vibration stimuli, respectively5. It is thought that the psychophysical thresholds for vibration perception rely to a considerable extent on the activation of these two sets of mechanoreceptors at their best frequencies6,7. Tactile spatial acuity is tested by the grating orientation task to determine the finest grating whose orientation can be discriminated by a subject7-9. Merkel cell-neurite complex afferents are essential for detecting grating orientation8,10. Interestingly, there has been considerable recent progress in our understanding of the molecular basis of how mechanoreceptors detect extremely small tactile stimuli11. Mechanosensitive ion channels like Piezo2 and modulators like STOML3 have been directly implicated in the detection of fine tactile stimuli in touch receptors12-15. There are already human patients identified with function altering mutations in the Piezo2 gene and it will be important to test whether such patients have touch deficits16. 
The determination of the vibrotactile threshold relies on the delivery of a vibrating stimulus to the skin. Vibration detection thresholds vary with the vibration frequency. Vibration frequency to detection threshold curves were described by von Bekesey, Verillo, and Bolanowski, among many others, from the 1930s up to the 1990s5,17. The devices in the early days were based on shakers and power amplifiers and several devices have been commercialized and there are a lot of variation as to choice of stimulator (testing frequency), the diameter of the probe in contact with skin, the use of a surround to limit the stimulation to one area of the skin, and the testing protocol that determines the threshold (see the following references for more detailed insight on the device and testing features)18-20. Most devices usually test one site; however, there are new devices that use vertical displacement stimulators equipped with 2 probes to deliver vibratory stimuli with separation ranges that can be varied21. Also detection thresholds are measured based on vibration frequency or intensity discrimination with continuous stimulation; or with intermittent vibration stimuli with or without a masking stimulus. Therefore, we recommend that the reader be aware of the plethora of developments in this field. 
Here, we describe the components of the device and a step-by-step guide on how to conduct psychophysical tests to estimate vibration detection threshold in human subjects. We then show how to assess tactile acuity manually by using the tactile acuity cube. We use a two-interval, forced-choice paradigm: the stimulus is always presented during one of two intervals and the subject has to indicate which interval has the vibration stimulus. We employ a transformed-rule up and down as the adaptive method that executes a threshold search by changing the stimulus intensity based on the performance during the test. Both psychophysical protocols can be used by investigators as a screening tool for evaluation of alterations in touch sensitivity.

<table border="0" cellpadding="0" cellspacing="0" width="1381">
	<colgroup>
		<col />
		<col />
		<col />
		<col />
		<col />
	</colgroup>
	<tbody>
		<tr height="145">
			<td height="145" style="height:145px;width:115px;">Piezo actuator</td>
			<td style="width:83px;">Physik Instrument, Germany</td>
			<td style="width:221px;">P-602.1L</td>
			<td style="width:411px;">The linear piezoelectric actuator, with integrated position sensor and motion amplifier, contains a piezoceramic material that elongates and contracts when voltage is applied. The piezoelectric actuator travels up to100 &#181;m. The actuator is equipped with a flexure guide that ensures straight motion without tilting or lateral offset. The displacement is linear and calibration is done and checked by the manufacturer. It is recommended that on-axis movement of the probe be checked under the microscope. According to the manufacturer, the stimulus amplitude dampens by less than 20% at oscillating frequencies of 1000 Hz. This can be checked by using a force or displacement measuring device (e.g. force transducer from Kleindiek).</td>
			<td style="width:555px;">The linear piezoelectric actuator, with integrated position sensor and motion amplifier, contains a piezoceramic material that elongates and contracts when voltage is applied. The piezoelectric actuator travels up to100 &#181;m. The actuator is equipped with a flexure guide that ensures straight motion without tilting or lateral offset. The displacement is linear and calibration is done and checked by the manufacturer. It is recommended that on-axis movement of the probe be checked under the microscope. According to the manufacturer, the stimulus amplitude dampens by less than 20% at oscillating frequencies of 1000 Hz. This can be checked by using a force or displacement measuring device (e.g. force transducer from Kleindiek).</td>
		</tr>
		<tr height="547">
			<td height="547" style="height:546px;width:115px;">Piezo Amplifier / Servo Controller</td>
			<td style="width:83px;">Physik Instrument, Germany</td>
			<td style="width:221px;">E-665</td>
			<td style="width:411px;">E-665 amplifier/controller drives and controls the displacement of a low-voltage piezoelectric actuator in a system with sensor position feedback (SGS sensors). The servo-controller provides the option for closed loop operation. When applying sinusoidal and oscillating stimuli the amplitude signal deviates from the set amplitude starting from 500 Hz and reaches a maximum decrease of 20% at 1000Hz.&#160;&#160;</td>
			<td style="width:555px;">E-665 amplifier/controller drives and controls the displacement of a low-voltage piezoelectric actuator in a system with sensor position feedback (SGS sensors). The servo-controller provides the option for closed loop operation. When applying sinusoidal and oscillating stimuli the amplitude signal deviates from the set amplitude starting from 500 Hz and reaches a maximum decrease of 20% at 1000Hz. &#160;</td>
		</tr>
		<tr height="39">
			<td height="57" rowspan="2" style="height:57px;width:115px;">LabChart Software</td>
			<td rowspan="2" style="width:83px;">ADInstruments, USA</td>
			<td style="width:221px;">LabChart 7, MLU60/8</td>
			<td style="width:411px;">Can create, store and run macro of the psychophysical testing algorithm.&#160;</td>
			<td rowspan="2" style="width:555px;">Can create, store and run macro of the psychophysical testing algorithm.&#160;&#160;</td>
		</tr>
		<tr height="18">
			<td height="18" style="height:18px;width:221px;"></td>
			<td style="width:411px;"></td>
		</tr>
		<tr height="17">
			<td height="35" rowspan="2" style="height:35px;width:115px;">PowerLab</td>
			<td rowspan="2" style="width:83px;">ADInstruments, USA</td>
			<td style="width:221px;">PowerLab 4/35 PL3504</td>
			<td rowspan="2" style="width:411px;">Data Acquisition Hardware. Used with LabChart software.</td>
			<td rowspan="2" style="width:555px;">Data Acquisition Hardware. Used with LabChart software.</td>
		</tr>
		<tr height="18">
			<td height="18" style="height:18px;width:221px;"></td>
		</tr>
		<tr height="60">
			<td height="60" style="height:60px;width:115px;">Brass bar</td>
			<td style="width:83px;">Custom-made</td>
			<td style="width:221px;"></td>
			<td colspan="2" style="width:965px;">Bar made of pure brass, weighs 15.5Kg. When the peizoelectric actuator is mounted on the brass bar it should exert a force of 30 g weight on skin surface.</td>
		</tr>
		<tr height="35">
			<td height="35" style="height:35px;width:115px;">Monitor</td>
			<td style="width:83px;">Custom-made</td>
			<td style="width:221px;"></td>
			<td colspan="2" style="width:965px;">To mark the 1st and the 2nd interval. The monitor indicates to the subject the time intervals during which the stimulus may be presented.</td>
		</tr>
		<tr height="35">
			<td height="35" style="height:35px;width:115px;">Response box</td>
			<td style="width:83px;">Custom-made</td>
			<td style="width:221px;"></td>
			<td colspan="2" style="width:965px;">The subject indicates the interval at which stimulus occurred.&#160;</td>
		</tr>
		<tr height="35">
			<td height="35" style="height:35px;width:115px;">Board&#160;</td>
			<td style="width:83px;">Custom-made</td>
			<td style="width:221px;"></td>
			<td colspan="2" style="width:965px;">Upper surface should be smooth (Plastic), lower surface made of foam to prevent stray vibration ot be transmitted to the stimulating pobe.&#160;</td>
		</tr>
		<tr height="71">
			<td height="71" style="height:71px;width:115px;">Probe</td>
			<td style="width:83px;">Custom-made</td>
			<td style="width:221px;"></td>
			<td colspan="2" style="width:965px;">A flat circular probe with smoothed edges (thermoplastic material) attached to a screw head. The screw should be of appropriate size to be tightened directly to the moving part of piezoelectric actuator. Size of the probe can be according to preference; in our case, diameter 8.21mm and surface area 52.9mm2.</td>
		</tr>
		<tr height="39">
			<td height="39" style="height:39px;width:115px;">Labchart Script</td>
			<td style="width:83px;"></td>
			<td style="width:221px;"></td>
			<td colspan="2" style="width:965px;">Can be sent on request. See supplementary code file.&#160;</td>
		</tr>
		<tr height="51">
			<td height="51" style="height:51px;width:115px;">Tactile Acuity Cube</td>
			<td style="width:83px;">MedCore</td>
			<td style="width:221px;"></td>
			<td colspan="2" style="width:965px;">The cube is comprised of 6 sides each containing a grating (bar and groove) whose widths are 0.75, 1.25, 1.75, 3.0, 4.5, and 6.0 mm.&#160;</td>
		</tr>
	</tbody>
</table>

measurement of vibration detection threshold and tactile spatial acuity in human subjects

Tests that allow the precise determination of psychophysical thresholds for vibration and grating orientation provide valuable information about mechanosensory function that are relevant for clinical diagnosis as well as for basic research. Here, we describe two psychophysical tests designed to determine the vibration detection threshold (automated system) and tactile spatial acuity (handheld device). Both procedures implement a two-interval forced-choice and a transformed-rule up and down experimental paradigm. These tests have been used to obtain mechanosensory profiles for individuals from distinct human cohorts such as twins or people with sensorineural deafness.

The piezoelectric actuator provides the vibration stimulus to the subject. The vibration stimulus has a total duration of 1.8 sec and is presented only once during a trial during the first or second interval (Figure 2A). The rise and fall time at the onset and offset of the stimulus is determined by the functions (1-e-bt)&#8729;Amplitude&#8729;sine(frequency), and (e-bt)&#8729;Amplitude&#8729;sine(frequency), respectively, where b is set at 9.1. The ...

Watch this Scientific Journal Video about Measurement of Vibration Detection Threshold and Tactile Spatial Acuity in Human Subjects at JoVE.com

Measurement of Vibration Detection Threshold and Tactile Spatial Acuity in Human Subjects

Here, we present protocols to determine vibration detection thresholds and tactile acuity using psychophysical methods in man.

Tests that allow the precise determination of psychophysical thresholds for vibration and grating orientation provide valuable information about ...

The overall goal of this psychophysical procedure is to determine the threshold for vibration detection in tactile spatial acuity. This method can help us ask some quite interesting questions about sense medicine through physiology, in particular, about the sense of touch. The main advantage of this method is that we can obtain quantitative information about mechani-sensory profiles in individuals and this information can be used for both for clinical diagnosis as well as for basic research.We first applied this method in a twin study to test whether touch traits in people are heritable. Visual demonstration of this method is critical as depiction of the procedure as well as the adaptive method we use are complex. Begin to assemble the components of the device by placing a 40 cm by 80 cm smooth surface board on a table.Then, place a brass bar on this board. Afterwards, ready the controller unit. Next, connect the response box and the monitor device to the data acquisition system.Then, screw the custom-made stimulating probe to the moving part of the piezoelectric actuator. Finally, mount the piezoelectric actuator with the probe on the balance brass bar. Begin by bringing the subject into a quiet room and seat them near the device.Inform the subject about the testing procedure and have them sign a written consent form. Then, place their arm on the board and pad the little finger with medical dough to minimize movement. Next, place the brass bar on the board and use a water level to position the probe horizontally on the little finger of the tested hand just below the nail bed.Avoid skin contact with the edges of the circular flat probe. Prior to starting the test, ensure that the procedure is understood by presenting both an easy to perceive vibration stimulus, and a hard one by varying the amplitude until the subject perceives a vibration. Then, start the test by running a script that uses a two alternative forced-choice procedure with the up-down adaptive method.For each trial, randomly administer a vibration stimulus during one of the two intervals which are visually indicated to the test subject as one or two on the screen in front of them. Ask the subject to indicate if the first or second interval contained the vibration stimulus by pressing the number one or two on the response box. Have the subject make a guess response if they are not sure when the stimulus was presented.Complete a total of six to nine trials, and repeat the same vibration stimulus at the one amplitude level at least six times consecutively. If all responses are correct, reduce the stimulus intensity level for the subsequent trial series. Based on the decision rule of the adaptive method, grant the subject more trials at the same stimulus intensity if the subject makes errors in a trial series.Reduce the stimulus intensity if the stimulus is correctly identified in at least five trials, and incorrectly in less than two trials. Increase the stimulus level if the subject makes two incorrect responses in a trial series or more than one incorrect response and fewer than five correct responses. Document the change in the direction of stimulus intensity as the reversal point.Change the stimulus intensity according to reversal point number. For example, prior to the third reversal point, Change by four intensity levels. Or at the third reversal point, change by two intensity levels.Otherwise, by one level. End testing when the subject completes a total of eight reversals. Finally calculate the vibration detection threshold or VDT by taking the median of the stimulus amplitude value of the last six reversals.Begin by providing instructions about the task in a quiet room set at a temperature between 20 and 30 degrees Celsius. Next, blindfold the subject using shielded eye glasses. Place the dominant hand on a table with the palm surface facing up.During each trial, apply the tactile acuity cube or TAC to the finger pad at one of two grating orientations. Vertically or horizontally aligned to the long axis of the finger. Apply the gratings of the TAC to the finger pad of the finger for two seconds so that the cube exerts its whole weight on the finger.Then, ask the subject to determine the orientation of the alignment before the cube is removed from their finger. Start with the largest grating at 6.0 millimeters and decrease the grating width after two correct identifications of the orientation. Then, test the next smaller width and continue with the stepping rule until the subject makes and incorrect response.Then, document this grating width as a reversal point. Increase the grating width step-wise again until the two orientations of the width are determined correctly again. Finally, end the test after the completion of 13 reversals and calculate the tactile grating orientation threshold by taking the median of the grating widths of the last 10 reversals.Here, a typical testing session to determine the vibration detection threshold at 125 Hz is shown. A decrease in stimulus intensity requires at least six sequential correct responses. Furthermore, a change in the direction of stimulus intensity marks a reversal point in the trial series track and requires at least two incorrect responses.The stimulus intensity is changed in steps of four levels when the number of reversals is less than three, followed by two levels at the third reversal, and finally one level steps to finally determine the threshold. For the tactile cube experiment, where each trial consists of two stimulations, vertical and horizontal, the threshold is 1.6 millimeters, which is the median value of the grating widths of the last 10 reversal points. Once mastered, this technique can be done in about 30 minutes, if it's done properly.After watching this video, you should get a good idea about how to measure vibration detection threshold as well as tactile acuity in humans.

measurement-vibration-detection-threshold-tactile-spatial-acuity

Research

JoVE Journal

Behavior

12.5K vistas.  Charite Universitätsmedzin, Campus Virchow Klinikum und Campus Charite Mitte. The overall goal of this psychophysical procedure is to determine the threshold for vibration detection in tactile spatial acuity. This method can help us ask some quite interesting questions about sense medicine through physiology, in particular, about the sense of touch. The main advantage of this method is that we can obtain quantitative information about mechani-sensory profiles in individuals and this information can be used for both for clinical diagnosis as well as for basic research.