mouse retinal dissection for split retina application

Étude des cellules neuronales bipolaires et horizontales dans la rétine divisée murine

The retina is a thin neural tissue located in the posterior eye where light is intercepted and processed into an electrochemical signal that can be interpreted by the brain. At the back of the retina, rod and cone photoreceptors are stimulated by light, which reduces the tonic release rate of the neurotransmitter, glutamate1. The first neurons to experience and respond to this light-induced change in glutamate concentration are the bipolar cells (BCs) and horizontal cells (HCs), whose somas reside in the outermost region of the inner nuclear layer (INL). These second-order neurons perform the first stage of signal processing in the retina and shape critical features of vision such as light adaptation, contrast sensitivity, and spatial/color opponency2. While these functions have been ascribed to BCs and HCs, the circuitry and biochemical mechanisms underlying these processes are not fully understood3. Therefore, the advancement of tools and methods for exploring BC and HC physiology is of paramount importance.
Vertical (transverse) retina sections have long&#160;proven the most practical model for studying BCs and HCs; however, certain aspects of BC and HC physiology are inaccessible to the experimenter under this model. Direct recordings from HCs or indirect measurements of their effects on BCs do not reflect the retina&#39;s endogenous connectivity since the lateral processes of these cells are severed during slicing. Whole mount retina preparations circumvent this issue by preserving these lateral processes, but the surrounding retinal layers pose a challenge for accessing these cells4. While there are abundant examples of immunostaining5,6,7,8 and patch clamp recordings9 from INL neurons in whole mount retinas, there is an opportunity to expedite and simplify the collection of these data. The inherent limitations of transverse sections and the challenges of the whole mount model thus inspired the development of this alternative flatmount retina preparation.
The following work describes a protocol for easily removing the photoreceptor layer from live, flatmount retinas to enhance access to BCs and HCs for simplified patch clamping and faster, more efficient immunolabeling. Peeling apart two pieces of nitrocellulose membrane attached to either side of an isolated retina tears the tissue through the photoreceptor axons, leaving a split retina that retains the outer plexiform layer (OPL) and all inner retinal layers. While others have described protocols for mechanically separating layers of the retina, these methods are either poorly suited to patch clamping and microscopy applications or require tedious manipulation of the tissue. Several of these methods require frozen or lyophilized tissue for layer separation, making them incompatible with electrophysiology experiments10,11,12. Others are designed for live tissue, but necessitate 5-15 sequential peels with filter paper4,11 or treatment with trypsin13 to remove the photoreceptors. The technique described here improves upon its predecessors by simplifying the photoreceptor removal procedure and expanding the repertoire of downstream applications.

Pleins feux sur l’auteur : Utilisation de la technique de la rétine fendue pour un meilleur accès et des expériences accélérées 

Split Retina en tant que préparation améliorée à montage plat pour l’étude des neurones de la couche nucléaire interne dans la rétine des vertébrés

Our group is interested in the neuronal circuitry and synaptic mechanisms underlying visual processing in the retina. The Morgans Lab is investigating molecular mechanisms of light adaptation in bipolar cells, and the Sivyer Lab is interested in how inner retinal neurons contribute to ganglion cell function. Accessing internuclear layer neurons in whole mount retina is a challenge for both anatomical and physiological studies.Internuclear layer neurons are accessible in vertical sections, but they're very few neurons in the field of view. Furthermore, slicing severs lateral processes and connections which can impact physiological studies. The removal of the photoreceptors in the split retina technique dramatically improves antibody diffusion into the inner retina, which makes immunolabeling of inner retinal targets over 20 times faster when compared to traditional whole mount retina.The split retina also greatly improves access to internuclear layer neurons during patch clamp electrophysiology. The split retina technique will open doors to new approaches and accelerate the pace of our experiments. For example, we plan to use this technique to study bipolar cell inputs to melanopsin ganglion cells by expressing channelrhodopsin in the bipolar cells.

Watch this Scientific Journal Video about Mouse Retinal Dissection for Split Retina Application at JoVE.com

Mouse Retinal Dissection for Split Retina Application  

Dissection rétinienne de souris pour application de rétine fendue

À l’aide d’une pipette de transfert à large ouverture, transférez un œil de souris dans une nouvelle boîte de Pétri avec des Ames’media glacés. À l’aide d’une paire de pinces, épinglez son tissu conjonctif supplémentaire au fond de la boîte pour stabiliser l’œil. Maintenant, percez l’œil le long de la ligne ora serrata avec une aiguille de calibre 25 pour créer un point d’entrée pour les ciseaux Vannas.Utilisez les ciseaux Vannas pour couper le long de l’ora serrata jusqu’à ce que la cornée se sépare. À l’aide d’une pince, retirez la lentille de l’œilleton, puis utilisez la pipette de transfert à large ouverture pour déplacer l’œilleton dans une boîte contenant un grand volume d’Ames' carbogené actifTransférez un œilleton dans une boîte de Pétri remplie de solution d’Ames carbogenée fraîche. Avec les ciseaux Vannas, faites une petite incision vers l’intérieur à partir du bord de la sclère.À l’aide de deux paires de pinces, retirez délicatement la sclérotique de la rétine. Coupez maintenant le nerf optique reliant la sclérotique et la rétine. Ensuite, utilisez des ciseaux pour soulever doucement la rétine de la sclérotique afin de l’isoler.Ensuite, à l’aide d’un scalpel, coupez la rétine en deux ou en quatre. À l’aide d’une pipette de transfert à large ouverture, placez les morceaux de rétine dans un grand volume de média d’Ames carbogené en continu. Répétez la dissection rétinienne pour l’autre œil avant la division rétinienne.

mouse-retinal-dissection-for-split-retina-application

Research

JoVE Journal

Neuroscience

Mouse Retinal Dissection for Split Retina Application

1.1K vues.  Oregon Health and Science University. À l’aide d’une pipette de transfert à large ouverture, transférez un œil de souris dans une nouvelle boîte de Pétri avec des Ames’media glacés. À l’aide d’une paire de pinces, épinglez son tissu conjonctif supplémentaire au fond de la boîte pour stabiliser l’œil. Maintenant, percez l’œil le long de la ligne ora serrata avec une aiguille de calibre 25 pour créer un point d’entrée pour les ciseaux Vannas.Utilisez les ciseaux Vannas pour couper le long de l?...

Vidéo: Mouse Retinal Dissection for Split Retina Application  

Split Retina as an Improved Flatmount Preparation for Studying Inner Nuclear Layer Neurons in Vertebrate Retina

Bipolar cells and horizontal cells of the vertebrate retina are the first neurons to process visual information after photons are detected by photoreceptors. They perform fundamental operations such as light adaptation, contrast sensitivity, and spatial and color opponency. A complete understanding of the precise circuitry and biochemical mechanisms that govern their behavior will advance visual neuroscience research and ophthalmological medicine. However, current preparations for examining bipolar and horizontal cells (retinal whole mounts and vertical slices) are limited in their capacity to capture the anatomy and physiology of these cells. In this work, we present a method for removing photoreceptor cell bodies from live, flatmount mouse retinas, providing enhanced access to bipolar and horizontal cells for efficient patch clamping and rapid immunolabeling. Split retinas are prepared by sandwiching an isolated mouse retina between two pieces of nitrocellulose, then gently peeling them apart. The separation splits the retina just above the outer plexiform layer to yield two pieces of nitrocellulose, one containing the photoreceptor cell bodies and another containing the remaining inner retina. Unlike vertical retina slices, the split retina preparation does not sever the dendritic processes of inner retinal neurons, allowing for recordings from bipolar and horizontal cells that integrate the contributions of gap junction-coupled networks and wide-field amacrine cells. This work demonstrates the versatility of this preparation for the study of horizontal and bipolar cells in electrophysiology, immunohistochemistry, and in situ hybridization experiments.

This work presents an alternative flatmount retina preparation in which the removal of photoreceptor cell bodies enables faster antibody diffusion and improved patch pipette access to inner retinal neurons for immunohistochemistry, in situ hybridization, and electrophysiology experiments.