Experimental Implementation of a New Composite Fabrication Method: Exposing Bare Fibers on the Composite Surface by the Soft Layer Method
8.2K Views
•
06:26 min
•
October 6th, 2017
DOI :
October 6th, 2017
•Transcription
Experimental Implementation of a New Composite Fabrication Method: Exposing Bare Fibers on the Composite Surface by the Soft Layer Method
8.2K Views
Fabrication and Characterization of Disordered Polymer Optical Fibers for Transverse Anderson Localization of Light
Vidéos connexes
11.3K Views
Emission Spectroscopic Boundary Layer Investigation during Ablative Material Testing in Plasmatron
Vidéos connexes
12.2K Views
Strain Sensing Based on Multiscale Composite Materials Reinforced with Graphene Nanoplatelets
Vidéos connexes
8.7K Views
Flow-assisted Dielectrophoresis: A Low Cost Method for the Fabrication of High Performance Solution-processable Nanowire Devices
Vidéos connexes
7.6K Views
A Fabrication and Measurement Method for a Flexible Ferroelectric Element Based on Van Der Waals Heteroepitaxy
Vidéos connexes
8.1K Views
Magnet Assisted Composite Manufacturing: A Flexible New Technique for Achieving High Consolidation Pressure in Vacuum Bag/Lay-Up Processes
Vidéos connexes
13.2K Views
Operation of the Collaborative Composite Manufacturing (CCM) System
Vidéos connexes
6.5K Views
Fabrication of Surface Acoustic Wave Devices on Lithium Niobate
Vidéos connexes
11.4K Views
Solution Blow Spinning of Polymeric Nano-Composite Fibers for Personal Protective Equipment
Vidéos connexes
2.5K Views
À PROPOS DE JoVE
Copyright © 2025 MyJoVE Corporation. Tous droits réservés.