on-plant method to deliver dye or biomolecules using vacnfs in a rigid substrate

שימוש במערכי ננו-סיבי פחמן להעברה יעילה של ביומולקולות וצבעים לצמחים

Plant transformation (both transient and stable) has yet to become widely achievable in all plant tissues and species. The transient transformation of plants is a process by which genes encoded in plasmids are temporarily introduced into plants but are not stably incorporated into the genome. Traditional methods that use particle bombardment, Agrobacteria, electroporation, or polyethylene glycol treatment of protoplasts are slow or can be cumbersome. Furthermore, they are not applicable to every plant species1,2,3,4.&#160;The use of nanomaterials for DNA delivery is a burgeoning field that is still in its infancy5. Nanomaterials, specifically carbon nanofibers have also successfully been used to deliver proteins, dextrans and dyes to plant leaves without causing wound response6. The goal of this work is to provide a detailed protocol for using one type of nanomaterial, carbon nanofibers, for delivering biomolecules or dyes to plants. Here, we focus on DNA as the biomolecule of choice, which permits the transient transformation of cells in various plant organs.
Previously, Morgan et al.7 demonstrated the use of carbon nanofibers affixed to rigid silicon substrate to transiently transform leaves of lettuce, N. benthamiana, and poplar, and both leaves and roots of Arabidopsis. Although transformations were successful on a variety of organs, fibers were more difficult to apply to plant tissues with curved surfaces, such as roots or fruits. We reasoned that a flexible backing for nanofibers might improve their efficiency of delivery by conforming better to the shape of the organ.
Herein, we detail methods utilized for fabricating and designing vertically aligned carbon nanofibers, transferring VACNFs to flexible substrates, and applying VACNFs on both rigid and flexible substrates to plants to deliver biomolecules and dyes. Carbon nanofibers were produced using direct current catalytic plasma-enhanced chemical vapor deposition (dc C-PECVD) with Ni catalyst. The position, diameter, and height of Ni catalyst dots were controlled using a combination of electron beam lithography, metal evaporation, and lift-off processes as described by Melechko et al.8,9. Using a double-layer e-beam resist, a thicker Ni catalyst can be deposited on the substrate to give longer fibers10. Fiber transfer from a rigid to a flexible substrate is based on a modification of methods described in Fletcher et al.11, with the current methods foregoing the use of an amorphous carbon layer or a sacrificial photoresist layer. SU-8 lift-off with fiber transfer is achieved by utilizing the intrinsic tensile stress resulting from underbaking and underexposing the SU-812,13,14. SU-8, a complex polymer, is naturally hydrophobic, which makes its use for facilitating DNA delivery difficult. To counteract the hydrophobic nature of SU-8, we apply a thin layer of silicon oxide via atomic layer deposition15 after fibers are embedded in SU-8. Application of fibers on a rigid substrate for biomolecule/dye delivery utilizes the impact force of tweezer tapping described in Davern et al.6 and the on-plant and on-chip methods described in Morgan et al.7. Flexible VACNF films are applied to curved plant surfaces by first semidrying DNA or dye droplets on the film as with the on-chip method from Morgan et al.7and then rolling the films on curved plant surfaces using a small makeup applicator16,17. Figure 1 depicts various approaches for applying fibers in rigid and flexible substrates to plants.

מחבר זרקור: שחרור טרנספורמציה של צמחים על ידי חדשנות עם מערכי ננו-סיבי פחמן 

שימוש במערכי ננו-סיבי פחמן מיושרים אנכית על מצעים קשיחים או גמישים להעברת ביומולקולות וצבעים לצמחים

We are trying to demonstrate a general method for delivery of dye or DNA into plants using carbon nanofiber arrays. Many plants are recalcitrant to traditional transformation methods. Our method can solve this problem using carbon nanofiber arrays on flexible rigid substrates.Our technique is fast and user-friendly. It can be applied to virtually any plant species or plant organ. It can also be used to deliver other reagents such as dyes and proteins.

Watch this Scientific Journal Video about On-Plant Method to Deliver Dye or Biomolecules Using VACNFs in a Rigid Substrate at JoVE.com

On-Plant Method to Deliver Dye or Biomolecules Using VACNFs in a Rigid Substrate  

שיטה על הצמח להעברת צבע או ביומולקולות באמצעות VACNFs במצע קשיח

כדי להתחיל, להסיר את התנגדות התמונה מן VACNFs על ידי שטיפה עם 100% אצטון במשך חמש דקות, ולאחר מכן חמש דקות לשטוף עם 100% IPA, ולאחר מכן מים מזוקקים פעמיים במשך חמש דקות. לאחר מכן, הניחו את רקמת הצמח כדי להיות משופד על משטח קשה לתמיכה. הניחו טיפת צבע מיקרוליטר אחת על פני רקמת הצמח.מניחים שבב VACNF עם מצע קשיח במורד החלק העליון של הטיפה, כאשר הסיבים מכוונים כך שהם יבואו במגע עם הטיפה. בעזרת הצד השטוח של זוג פינצטה, מקישים על השבב, מסמנים את אזור הצמח שהשבב בא איתו במגע באמצעות טוש רך. הסר את שבבי VACNF לאחר המסירה.חזור על שלבים אלה עבור פקדים, כגון מיקום צבע בצד ללא סיבים של סרט צילום, שימוש בסרט צילום ללא צבע ושימוש בצד ללא סיבים של סרט צילום. אחסנו צמחים שלמים או איברי צמח שנכרתו בתאים לחים בתנאי יום ארוכים. עבור איברים שנכרתו, השתמשו בכלי פטרי מפלסטיק עם מגבות נייר רטובות.בשיטה זו הועבר צבע פלואורסצאין לעלי ארבידופסיס. תמונות שצולמו בנקודות זמן שונות, הראו כי צבע פלואורסצאין נצפה מיד לאחר הלידה. באופן דומה, אספקת פלסמיד המכיל חלבון פלואורסצנטי צהוב הושגה בעלי Arabidopsis.

on-plant-method-to-deliver-dye-or-biomolecules-using-vacnfs-rigid

Research

JoVE Journal

Bioengineering

On-Plant Method to Deliver Dye or Biomolecules Using VACNFs in a Rigid Substrate

234 Views.  The University of Chicago. כדי להתחיל, להסיר את התנגדות התמונה מן VACNFs על ידי שטיפה עם 100% אצטון במשך חמש דקות, ולאחר מכן חמש דקות לשטוף עם 100% IPA, ולאחר מכן מים מזוקקים פעמיים במשך חמש דקות. לאחר מכן, הניחו את רקמת הצמח כדי להיות משופד על משטח קשה לתמיכה. הניחו טיפת צבע מיקרוליטר אחת על פני רקמת הצמח.מני...

Video: On-Plant Method to Deliver Dye or Biomolecules Using VACNFs in a Rigid Substrate  

Using Vertically Aligned Carbon Nanofiber Arrays on Rigid or Flexible Substrates for Delivery of Biomolecules and Dyes to Plants

The delivery of biomolecules and impermeable dyes to intact plants is a major challenge. Nanomaterials are up-and-coming tools for the delivery of DNA to plants. As exciting as these new tools are, they have yet to be widely applied. Nanomaterials fabricated on rigid substrate (backing) are particularly difficult to successfully apply to curved plant structures. This study describes the process for microfabricating vertically aligned carbon nanofiber arrays and transferring them from a rigid to a flexible substrate. We detail and demonstrate how these fibers (on either rigid or flexible substrates) can be used for transient transformation or dye (e.g., fluorescein) delivery to plants. We show how VACNFs can be transferred from rigid silicon substrate to a flexible SU-8 epoxy substrate to form flexible VACNF arrays. To overcome the hydrophobic nature of SU-8, fibers in the flexible film were coated with a thin silicon oxide layer (2-3 nm). To use these fibers for delivery to curved plant organs, we deposit a 1 &#181;L droplet of dye or DNA solution on the fiber side of VACNF films, wait 10 min, place the films on the plant organ and employ a swab with a rolling motion to drive fibers into plant cells. With this method, we have achieved dye and DNA delivery in plant organs with curved surfaces.

Here we describe methods for microfabricating vertically aligned carbon nanofibers (VACNFs), transferring VACNFs to flexible substrates, and applying VACNFs on both rigid and flexible substrates to plants for biomolecule and dye delivery.

The delivery of biomolecules and impermeable dyes to intact plants is a major challenge. Nanomaterials are up-and-coming tools for the delivery of DNA to ...

On-Chip Method to Deliver Dye or Biomolecules to Plants Using VACNFs in a Flexible Substrate

Begin by preparing vertically aligned carbon nano fibers, or VACNFs. To transfer the VACNFs to a flexible substrate, first place the individual chips in acetone to separate the flexible substrate from the rigid substrate. Then, wash SU-8 films with IPA for five minutes, followed by washing with water for five minutes.Place the chips in a commercial box with a sticky pad when transporting them. Prepare a silicone rubber PET holder by mixing the elaststomer and the crosslinker from a two-part kit. Cut out a square of PET and tape it down in a clear plastic dish.Then, pour a very thin film of silicone rubber on top of the PET and cure it at 80 degrees Celsius for one to two hours. Transfer the SU-8 film to the PET holder using a pair of tweezers, and place the fiberless side of the SU-8 film on the silicone rubber. Press on the edges of the SU-8 square to help it stick to the silicone rubber PET and avoid breaking off fibers.Then, place a one microliter droplet of dye onto the fiber side of the SU-8 film and let it dry for 10 minutes. After drying, place the VACNF film onto the plant surface using a pair of sharp tweezers. Then, gently roll a small makeup applicator over the VACNF film.Mark the areas where the flexible substrates are placed with a soft tipped marker. Then remove the flexible substrates from the plant surface using tape. Repeat VACNF application for controls, such as placing dye on the fiberless side of a film, using the film without dye, and using the fiberless side of a film.The on-chip method was used to deliver fluorescein dye to curved surfaces, such as strawberries, in which a strong fluorescein signal was observed immediately. Whereas in apples, a strong fluorescein signal was seen after two hours of delivery. Similarly, delivery of a plasmid containing yellow fluorescent protein was achieved in apples.Also, a successful transient transformation of onions was done by delivering the plasmid containing yellow fluorescent protein using VACNF films.

שיטה על שבב להעברת צבע או ביומולקולות לצמחים באמצעות VACNFs במצע גמיש

To begin, remove the photo resist from the VACNFs by washing with 100%acetone for five minutes, followed by a five minute wash with 100%IPA, and then double distilled water for five minutes. Then, place the plant tissue to be impaled on a hard surface for support. Place a one microliter droplet of dye onto the surface of the plant tissue.Place a VACNF chip with a rigid substrate down the top of the droplet, with the fibers oriented such that they will come into contact with the droplet. Using the flat side of a pair of tweezers, tap the chip, mark the area of the plant that the chip came into contact with using a soft tipped marker. Remove the VACNF chips after delivery.Repeat these steps for controls, such as placing dye on the fiberless side of a film, using the film without dye, and using the fiberless side of a film. Store intact plants or excised plant organs in humid chambers in long day conditions. For excised organs, use a plastic Petri dish with wet paper towels.Using this method, fluorescein dye was delivered to Arabidopsis leaves. Images taken at different time points, showed that the fluorescein dye was observed immediately after delivery. Similarly, delivery of a plasmid containing yellow fluorescent protein was achieved in Arabidopsis leaves.