מחקר זה מומן בחלקו על ידי ניו תוכנית המנהל של NIH ממציא פרס, במסגרת מפת הדרכים NIH למחקר רפואי, באמצעות מספר מענק 1-DP2-OD004309-01. SBS-N. רוצה להודות ה-NSF עבור מלגת מחקר לתארים מתקדמים.

<ol>
	<li>Seif-Naraghi, S. B., Salvatore, M. A., Magoffin-Schup, P. J., Hu, D. P., Christman, K. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Design+and+characterization+of+an+injectable+pericardial+matrix+gel:+A+potentially+autologous+scaffold+for+cardiac+tissue+engineering.">Design and characterization of an injectable pericardial matrix gel: A potentially autologous scaffold for cardiac tissue engineering.</a> Tissue Engineering. , (2009).</li><li>Freytes, D. O., Martin, J., Velankar, S. S., Lee, A. S., Badylak, S. F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Preparation+and+rheological+characterization+of+a+gel+form+of+the+porcine+urinary+bladder+matrix.">Preparation and rheological characterization of a gel form of the porcine urinary bladder matrix.</a> Biomaterials. 29, 1630-1630 (2008).</li><li>Gilbert, T. W., Sellaro, T. L., Badylak, S. F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Decellularization+of+tissues+and+organs.">Decellularization of tissues and organs.</a> Biomaterials. 27, 3675-3675 (2006).</li><li>Liao, J., Joyce, E. M., Sacks, M. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Effects+of+decellularization+on+the+mechanical+and+structural+properties+of+the+porcine+aortic+valve+leaflet.">Effects of decellularization on the mechanical and structural properties of the porcine aortic valve leaflet.</a> Biomaterials. 29, 1065-1065 (2008).</li><li>Singelyn, J. M., DeQuach, J. A., Seif-Naraghi, S. B., Littlefield, R. B., Schup-Magoffin, P. J., Christman, K. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Naturally+derived+myocardial+matrix+as+an+injectable+scaffold+for+cardiac+tissue+engineering.">Naturally derived myocardial matrix as an injectable scaffold for cardiac tissue engineering.</a> Biomaterials. 30, 5409-5409 (2009).</li><li>Christman, K. L., Vardanian, A. J., Fang, Q., Sievers, R. E., Fok, H. H., Lee, R. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Injectable+fibrin+scaffold+improves+cell+transplant+survival,+reduces+infarct+expansion,+and+induces+neovasculature+formation+in+ischemic+myocardium.">Injectable fibrin scaffold improves cell transplant survival, reduces infarct expansion, and induces neovasculature formation in ischemic myocardium.</a> J Am Coll Cardiol. 44, 654-654 (2004).</li><li>Christman, K. L., Fok, H. H., Sievers, R. E., Fang, Q., Lee, R. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fibrin+glue+alone+and+skeletal+myoblasts+in+a+fibrin+scaffold+preserve+cardiac+function+after+myocardial+infarction.">Fibrin glue alone and skeletal myoblasts in a fibrin scaffold preserve cardiac function after myocardial infarction.</a> Tissue Eng. 10, 403-410 (2004).</li><li>Huang, N. F., Sievers, R. E., Park, J. S., Fang, Q., Li, S., Lee, R. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+rodent+model+of+myocardial+infarction+for+testing+the+efficacy+of+cells+and+polymers+for+myocardial+reconstruction.">A rodent model of myocardial infarction for testing the efficacy of cells and polymers for myocardial reconstruction.</a> Nat Protoc. (1), 1596-1609 (2006).</li><li>Ott, H. C., Matthiesen, T. S., Goh, S. K., Black, L. D., Kren, S. M., Netoff, T. I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Perfusion-decellularized+matrix:+using+nature's+platform+to+engineer+a+bioartificial+heart.">Perfusion-decellularized matrix: using nature's platform to engineer a bioartificial heart.</a> Nat Med. 14, 213-221 (2008).</li><li>Badylak, S. F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+extracellular+matrix+as+a+biologic+scaffold+material.">The extracellular matrix as a biologic scaffold material.</a> Biomaterials. 28, 3587-3593 (2007).</li></ol>

שימוש בבעלי חיים: כל הניסויים במחקר זה בוצעו בהתאם להנחיות שפורסמו על ידי טיפול בבעלי חיים מוסדיים ועדת השתמש באוניברסיטת קליפורניה, סן דייגו ואת האגודה האמריקנית לטיפול בבעלי חיים ההסמכה של המעבדה.

שיטה זו מאפשרת לדור של פיגומים נגזר ביולוגי הניתן להזרקה לצורך הנדסת רקמות שריר הלב. אמנם בשיטות אלו פותחו בתחילה עבור ייצור ו בבדיקת vivo של ג&#39;ל מטריצה ​​שריר הלב המוצג כאן עם ג&#39;ל מטריצה ​​קרום הלב, בפרוטוקול זה יכול להיות מותאם לשימוש עם רקמה, בתנאי הרקמה ני...

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">	
		
		<div>
		<table border="1">
		<thead>
		<tr>
		<th>Material Name</th>
		<th>Type</th>
		<th>Company</th>
		<th>Catalogue Number</th>
		<th>Comment</th>
		</tr>
		</thead>
		<tbody>
		
<tr>
<td>Reagents:</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>Pepsin</td>
<td>&nbsp;</td>
<td>Sigma-Aldrich</td>
<td>p6887-1G</td>
<td>Lyophilized </td>
</tr>
<tr>
<td>Biotin</td>
<td>&nbsp;</td>
<td>Thermo Scientific</td>
<td>21217</td>
<td>&nbsp;</td>
<tr>
<td>Neutravidin-HRP</td>
<td>&nbsp;</td>
<td>Thomas Scientific</td>
<td>21130</td>
<td>&nbsp;</td>
<tr>
<td>Equipment: </td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>Wiley Mini Mill</td>
<td>&nbsp;</td>
<td>Thomas Scientific</td>
<td>3383L10</td>
<td>&nbsp;</td>
<tr>
<td>Labconco Lyophilizer</td>
<td>&nbsp;</td>
<td>Labconco, Inc</td>
<td>7670520</td>
<td>&nbsp;</td>
<tr>
<td>Surgical supplies:</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>Betadine</td>
<td>&nbsp;</td>
<td>Purdue Products, L.P.</td>
<td>67618-154-16</td>
<td>&nbsp;</td>
<tr>
<td>Lactated Ringers Solution</td>
<td>&nbsp;</td>
<td>MWI</td>
<td>003966</td>
<td>&nbsp;</td>
<tr>
<td>KY Jelly</td>
<td>&nbsp;</td>
<td>MWI</td>
<td>28658</td>
<td>&nbsp;</td>
<tr>
<td>Lidocaine, 2%</td>
<td>&nbsp;</td>
<td>MWI</td>
<td>17767</td>
<td>&nbsp;</td>
<tr>
<td>Buprenorphine hydrochloride</td>
<td>&nbsp;</td>
<td>Reckitt Benckiser Healthcare (UK) Ltd.</td>
<td>12496-0757-1</td>
<td>&nbsp;</td>
<tr>
<td>Artificial tear ointment</td>
<td>&nbsp;</td>
<td>Fisher </td>
<td>NC9860843</td>
<td>&nbsp;</td>
<tr>
<td>Triple antibiotic ointment</td>
<td>&nbsp;</td>
<td>Fisher</td>
<td>19082795</td>
<td>&nbsp;</td>
<tr>
<td>Isoflurane</td>
<td>&nbsp;</td>
<td>MWI</td>
<td>60307-120-25</td>
<td>&nbsp;</td>
<tr>
<td>Otoscope </td>
<td>&nbsp;</td>
<td>MWI</td>
<td>008699</td>
<td>&nbsp;</td>
<tr>
<td>Stop cock</td>
<td>&nbsp;</td>
<td>MWI</td>
<td>006245</td>
<td>&nbsp;</td>
<tr>
<td>3-0 Vicrile suture</td>
<td>&nbsp;</td>
<td>MWI</td>
<td>J327H</td>
<td>&nbsp;</td>
<tr>
<td>5-0 Proline suture</td>
<td>&nbsp;</td>
<td>MWI</td>
<td>s-1173</td>
<td>&nbsp;</td>
<tr>
<td>Reverse cutting (RC) needle</td>
<td>&nbsp;</td>
<td>Ethicon</td>
<td>8684G</td>
<td>&nbsp;</td>
<tr>
<td>Microhemostats </td>
<td>&nbsp;</td>
<td>Fine Science Tools</td>
<td>13013-14</td>
<td>&nbsp;</td>
<tr>
<td>Rat tooth microforceps</td>
<td>&nbsp;</td>
<td>Fine Science Tools</td>
<td>11084-07</td>
<td>&nbsp;</td>
<tr>
<td>No. 10 scalpel</td>
<td>&nbsp;</td>
<td>Fine Science Tools</td>
<td>10110-01</td>
<td>&nbsp;</td>
<tr>
<td>Blunt scissors</td>
<td>&nbsp;</td>
<td>Fine Science Tools</td>
<td>14108-09</td>
<td>&nbsp;</td>
<tr>
<td>Sharp, curved scissors</td>
<td>&nbsp;</td>
<td>Fine Science Tools</td>
<td>14085-08</td>
<td>&nbsp;</td>
<tr>
<td>Large, serrated forceps</td>
<td>&nbsp;</td>
<td>Fine Science Tools</td>
<td>1106-12</td>
<td>&nbsp;</td>
<tr>
<td>PE160 suction tubing</td>
<td>&nbsp;</td>
<td>BD</td>
<td>427430 </td>
<td>&nbsp;</td>
<tr>
<td>Clippers </td>
<td>&nbsp;</td>
<td>MWI</td>
<td>21608</td>
<td>&nbsp;</td>
<tr>
<td>Skin staples/stapler </td>
<td>&nbsp;</td>
<td>Ethicon</td>
<td>PRR35</td>
<td>&nbsp;</td>
<tr>
<td>General supplies:</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>Stir plates</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>0.1 M HCl</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>1 M NaOH</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>10x PBS</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>1x PBS</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>70% Ethanol</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>0.1 mL syringes</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>10 mL syringe</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>Q-tips</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>Surgical glue</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>Surgical drape</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>Towel clamps</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>Small hand-held vacuum </td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>		</tbody>
		</table>
		</div>

fabrication of biologically derived injectable materials for myocardial tissue engineering

פרוטוקול זה מספק שיטות להכנת ג&#39;ל בזריקות תאית (ECM) מטריצה ​​עבור יישומי הנדסה רקמת שריר הלב. בקצרה, היא רקמה decellularized lyophilized, הסתובבו, מתעכל enzymatically, והביא אז pH פיזיולוגי. Lyophilization מסיר את כל התוכן מים מן הרקמה, וכתוצאה מכך ECM יבש שניתן האדמה לאבקה דקה עם מפעל קטן. לאחר טחינה, אבקת ECM מתעכל עם פפסין להקים מטריצה ​​להזרקה. לאחר תקנון ל-pH 7.4, חומר נוזלי מטריצה ​​יהיה ניתן להזריק לתוך שריר הלב. תוצאות של מבחני אפיון קודמים הראו כי המטריצה ​​ג&#39;לים המופק רקמות decellularized קרום הלב ואת שריר הלב לשמור רכיבים ECM הילידים, כולל חלבונים, פפטידים מגוונים glycosaminoglycans. לאור השימוש בחומר זה עבור הנדסת רקמות, באפיון vivo שימושית במיוחד; כאן, שיטה לביצוע זריקה עירונית לתוך החדר השמאלי (LV) קיר פנוי מוצג כאמצעי ניתוח התגובה לארח הג&#39;ל מטריקס מודל חיה קטנה. גישה חלל החזה הוא צבר דרך הסרעפת ואת הזריקה נעשית מעט מעל לשיא בקיר LV חינם. פיגום ביולוגי נגזר ניתן דמיינו ידי תיוג-ביוטין לפני הזריקה ולאחר מכן מכתים סעיפים רקמה עם צנון סוס peroxidase-מצומדות neutravidin באופן חזותי באמצעות מכתים (DAB) diaminobenzidine. ניתוח באזור ההזרקה יכולה להיעשות גם עם צביעה היסטולוגית ו immunohistochemical. בדרך זו, הג&#39;לים נבדק בעבר מטריצה ​​קרום הלב ואת שריר הלב הוצגו בצורה סיבי, רשתות נקבוביים לקדם היווצרות כלי בתוך האזור ההזרקה.

Watch this Scientific Journal Video about Fabrication of Biologically Derived Injectable Materials for Myocardial Tissue Engineering at JoVE.com

Fabrication of Biologically Derived Injectable Materials for Myocardial Tissue Engineering

שיטות להכנת ג&#39;ל מטריצה ​​בזריקות מרקמות decellularized והזרקת אותו לתוך שריר הלב חולדה<em&gt; In vivo</em&gt; מתוארים.

ייצור של חומרים בזריקות נגזר ביולוגית של הנדסת רקמות שריר הלב

This protocol provides methods for the preparation of an injectable extracellular matrix (ECM) gel for myocardial tissue engineering applications.  ...

fabrication-biologically-derived-injectable-materials-for-myocardial

Research

JoVE Journal

Bioengineering

14.9K Views.  University of California, San Diego. שיטות להכנת ג'ל מטריצה ​​בזריקות מרקמות decellularized והזרקת אותו לתוך שריר הלב חולדה In vivo מתוארים.

Video: Fabrication of Biologically Derived Injectable Materials for Myocardial Tissue Engineering

Directed Cellular Self-Assembly to Fabricate Cell-Derived Tissue Rings for Biomechanical Analysis and Tissue Engineering

Each year, hundreds of thousands of patients undergo coronary artery bypass surgery in the United States.1 Approximately one third of these patients do not have suitable autologous donor vessels due to disease progression or previous harvest. The aim of vascular tissue engineering is to develop a suitable alternative source for these bypass grafts. In addition, engineered vascular tissue may prove valuable as living vascular models to study cardiovascular diseases. Several promising approaches to engineering blood vessels have been explored, with many recent studies focusing on development and analysis of cell-based methods.2-5 Herein, we present a method to rapidly self-assemble cells into 3D tissue rings that can be used in vitro to model vascular tissues.
To do this, suspensions of smooth muscle cells are seeded into round-bottomed annular agarose wells. The non-adhesive properties of the agarose allow the cells to settle, aggregate and contract around a post at the center of the well to form a cohesive tissue ring.6,7 These rings can be cultured for several days prior to harvesting for mechanical, physiological, biochemical, or histological analysis. We have shown that these cell-derived tissue rings yield at 100-500 kPa ultimate tensile strength8 which exceeds the value reported for other tissue engineered vascular constructs cultured for similar durations (&lt;30 kPa).9,10 Our results demonstrate that robust cell-derived vascular tissue ring generation can be achieved within a short time period, and offers the opportunity for direct and quantitative assessment of the contributions of cells and cell-derived matrix (CDM) to vascular tissue structure and function.

This article outlines a versatile method to create cell-derived tissue rings by cellular self-assembly. Smooth muscle cells seeded into ring-shaped agarose wells aggregate and contract to form robust three-dimensional (3D) tissues within 7 days. Millimeter-scale tissue rings are conducive to mechanical testing and serve as building blocks for tissue assembly.

בימוי נייד הרכבה עצמית לפברק Cell-נגזר טבעות רקמות לניתוח biomechanical הנדסת רקמות

Each year, hundreds of thousands of patients undergo coronary artery bypass surgery in the United States.1 Approximately one third of these patients do ...

Postproduction Processing of Electrospun Fibres for Tissue Engineering

Electrospinning is a commonly used and versatile method to produce scaffolds (often biodegradable) for 3D tissue engineering.1, 2, 3 Many tissues in vivo undergo biaxial distension to varying extents such as skin, bladder, pelvic floor and even the hard palate as children grow. In producing scaffolds for these purposes there is a need to develop scaffolds of appropriate biomechanical properties (whether achieved without or with cells) and which are sterile for clinical use. The focus of this paper is not how to establish basic electrospinning parameters (as there is extensive literature on electrospinning) but on how to modify spun scaffolds post production to make them fit for tissue engineering purposes - here thickness, mechanical properties and sterilisation (required for clinical use) are considered and we also describe how cells can be cultured on scaffolds and subjected to biaxial strain to condition them for specific applications.
Electrospinning tends to produce thin sheets; as the electrospinning collector becomes coated with insulating fibres it becomes a poor conductor such that fibres no longer deposit on it. Hence we describe approaches to produce thicker structures by heat or vapour annealing increasing the strength of scaffolds but not necessarily the elasticity. Sequential spinning of scaffolds of different polymers to achieve complex scaffolds is also described. Sterilisation methodologies can adversely affect strength and elasticity of scaffolds. We compare three methods for their effects on the biomechanical properties on electrospun scaffolds of poly lactic-co-glycolic acid (PLGA).
Imaging of cells on scaffolds and assessment of production of extracellular matrix (ECM) proteins by cells on scaffolds is described. Culturing cells on scaffolds in vitro can improve scaffold strength and elasticity but the tissue engineering literature shows that cells often fail to produce appropriate ECM when cultured under static conditions. There are few commercial systems available that allow one to culture cells on scaffolds under dynamic conditioning regimes - one example is the Bose Electroforce 3100 which can be used to exert a conditioning programme on cells in scaffolds held using mechanical grips within a media filled chamber.4 An approach to a budget cell culture bioreactor for controlled distortion in 2 dimensions is described. We show that cells can be induced to produce elastin under these conditions. Finally assessment of the biomechanical properties of processed scaffolds cultured with or without cells is described.

Electrospun scaffolds can be processed post production for tissue engineering applications. Here we describe methods for spinning complex scaffolds (by consecutive spinning), for making thicker scaffolds (by multi-layering using heat or vapour annealing), for achieving sterility (aseptic production or sterilisation post production) and for achieving appropriate biomechanical properties.

Postproduction עיבוד Fibres Electrospun עבור הנדסת רקמות

Electrospinning is a commonly used and versatile method to produce  scaffolds (often biodegradable) for 3D tissue engineering.1, 2, 3 Many tissues in vivo ...

Engineering 3D Cellularized Collagen Gels for Vascular Tissue Regeneration

Synthetic materials are known to initiate clinical complications such as inflammation, stenosis, and infections when implanted as vascular substitutes. Collagen has been extensively used for a wide range of biomedical applications and is considered a valid alternative to synthetic materials due to its inherent biocompatibility (i.e., low antigenicity, inflammation, and cytotoxic responses). However, the limited mechanical properties and the related low hand-ability of collagen gels have hampered their use as scaffold materials for vascular tissue engineering. Therefore, the rationale behind this work was first to engineer cellularized collagen gels into a tubular-shaped geometry and second to enhance smooth muscle cells driven reorganization of collagen matrix to obtain tissues stiff enough to be handled.
The strategy described here is based on the direct assembling of collagen and smooth muscle cells (construct) in a 3D cylindrical geometry with the use of a molding technique. This process requires a maturation period, during which the constructs are cultured in a bioreactor under static conditions (without applied external dynamic mechanical constraints) for 1 or 2 weeks. The &#8220;static bioreactor&#8221; provides a monitored and controlled sterile environment (pH, temperature, gas exchange, nutrient supply and waste removal) to the constructs. During culture period, thickness measurements were performed to evaluate the cells-driven remodeling of the collagen matrix, and glucose consumption and lactate production rates were measured to monitor the cells metabolic activity. Finally, mechanical and viscoelastic properties were assessed for the resulting tubular constructs. To this end, specific protocols and a focused know-how (manipulation, gripping, working in hydrated environment, and so on) were developed to characterize the engineered tissues.

In this work, we present a technique for the rapid fabrication of living vascular tissues by direct culturing of collagen, smooth muscle cells and endothelial cells. In addition, a new protocol for the mechanical characterization of engineered vascular tissues is described.

הנדסת ג&#39;ל קולגן Cellularized 3D לשחזור רקמות וכלי דם

Synthetic materials are known to initiate clinical complications such as inflammation, stenosis, and infections when implanted as vascular substitutes. ...

Design and Construction of Artificial Extracellular Matrix (aECM) Proteins from Escherichia coli for Skin Tissue Engineering

Recombinant technology is a versatile platform to create novel artificial proteins with tunable properties. For the last decade, many artificial proteins that have incorporated functional domains derived from nature (or created de novo) have been reported. In particular, artificial extracellular matrix (aECM) proteins have been developed; these aECM proteins consist of biological domains taken from fibronectin, laminins and collagens and are combined with structural domains including elastin-like repeats, silk and collagen repeats. To date, aECM proteins have been widely investigated for applications in tissue engineering and wound repair. Recently, Tjin and coworkers developed integrin-specific aECM proteins designed for promoting human skin keratinocyte attachment and propagation. In their work, the aECM proteins incorporate cell binding domains taken from fibronectin, laminin-5 and collagen IV, as well as flanking elastin-like repeats. They demonstrated that the aECM proteins developed in their work were promising candidates for use as substrates in artificial skin. Here, we outline the design and construction of such aECM proteins as well as their purification process using the thermo-responsive characteristics of elastin.

Design and Construction of Artificial Extracellular Matrix aECM Proteins from Escherichia coli for Skin Tissue Engineering

Recombinant technologies have enabled material designers to create novel artificial proteins with customized functionalities for tissue engineering applications. For example, artificial extracellular matrix proteins can be designed to incorporate structural and biological domains derived from native ECMs. Here, we describe the construction and purification of aECM proteins containing elastin-like repeats.

עיצוב ובנייה של תאי מטריקס המלאכותי (aECM) חלבונים מ<em&gt; Coli Escherichia</em&gt; להנדסת רקמות עור

Recombinant technology is a versatile platform to create novel artificial proteins with tunable properties. For the last decade, many artificial proteins ...

Biomembrane Fabrication by the Solvent-assisted Lipid Bilayer (SALB) Method

In order to mimic cell membranes, the supported lipid bilayer (SLB) is an attractive platform which enables in vitro investigation of membrane-related processes while conferring biocompatibility and biofunctionality to solid substrates. The spontaneous adsorption and rupture of phospholipid vesicles is the most commonly used method to form SLBs. However, under physiological conditions, vesicle fusion (VF) is limited to only a subset of lipid compositions and solid supports. Here, we describe a one-step general procedure called the solvent-assisted lipid bilayer (SALB) formation method in order to form SLBs which does not require vesicles. The SALB method involves the deposition of lipid molecules onto a solid surface in the presence of water-miscible organic solvents (e.g., isopropanol) and subsequent solvent-exchange with aqueous buffer solution in order to trigger SLB formation. The continuous solvent exchange step enables application of the method in a flow-through configuration suitable for monitoring bilayer formation and subsequent alterations using a wide range of surface-sensitive biosensors. The SALB method can be used to fabricate SLBs on a wide range of hydrophilic solid surfaces, including those which are intractable to vesicle fusion. In addition, it enables fabrication of SLBs composed of lipid compositions which cannot be prepared using the vesicle fusion method. Herein, we compare results obtained with the SALB and conventional vesicle fusion methods on two illustrative hydrophilic surfaces, silicon dioxide and gold. To optimize the experimental conditions for preparation of high quality bilayers prepared via the SALB method, the effect of various parameters, including the type of organic solvent in the deposition step, the rate of solvent exchange, and the lipid concentration is discussed along with troubleshooting tips. Formation of supported membranes containing high fractions of cholesterol is also demonstrated with the SALB method, highlighting the technical capabilities of the SALB technique for a wide range of membrane configurations.

Biomembrane Fabrication by the Solvent-assisted Lipid Bilayer SALB Method

We present an experimental protocol to form a supported lipid bilayer on solid substrates without using lipid vesicles. We demonstrate a one-step method to form a lipid bilayer on silicon dioxide and gold as well as supported membranes with cholesterol-enriched domain for various biological applications.

ייצור Biomembrane ידי השומנים bilayer (SALB) השיטה בסיוע מרכך

In order to mimic cell membranes, the supported lipid bilayer (SLB) is an attractive platform which enables in vitro investigation of membrane-related ...

Fabrication of Mechanically Tunable and Bioactive Metal Scaffolds for Biomedical Applications

Biometal systems have been widely used for biomedical applications, in particular, as load-bearing materials. However, major challenges are high stiffness and low bioactivity of metals. In this study, we have developed a new method towards fabricating a new type of bioactive and mechanically reliable porous metal scaffolds-densified porous Ti scaffolds. The method consists of two fabrication processes, 1) the fabrication of porous Ti scaffolds by dynamic freeze casting, and 2) coating and densification of the porous scaffolds. The dynamic freeze casting method to fabricate porous Ti scaffolds allowed the densification of porous scaffolds by minimizing the chemical contamination and structural defects. The densification process is distinctive for three reasons. First, the densification process is simple, because it requires a control of only one parameter (degree of densification). Second, it is effective, as it achieves mechanical enhancement and sustainable release of biomolecules from porous scaffolds. Third, it has broad applications, as it is also applicable to the fabrication of functionally graded porous scaffolds by spatially varied strain during densification.

Bioactive and mechanically reliable metal scaffolds have been fabricated through a method which consists of two processes, dynamic freeze casting for the fabrication of porous Ti, and coating and densification of the Ti scaffolds. The densification process is simple, effective and applicable to the fabrication of functionally graded scaffolds.

המצאה של מכאני מתכוונן ויו מתכת פיגומים עבור יישומים ביו

Biometal systems have been widely used for biomedical applications, in particular, as load-bearing materials. However, major challenges are high stiffness ...

Fabrication of Inverted Colloidal Crystal Poly(ethylene glycol) Scaffold: A Three-dimensional Cell Culture Platform for Liver Tissue Engineering

The ability to maintain hepatocyte function in vitro, for the purpose of testing xenobiotics&#39; cytotoxicity, studying virus infection and developing drugs targeted at the liver, requires a platform in which cells receive proper biochemical and mechanical cues. Recent liver tissue engineering systems have employed three-dimensional (3D) scaffolds composed of synthetic or natural hydrogels, given their high water retention and their ability to provide the mechanical stimuli needed by the cells. There has been growing interest in the inverted colloidal crystal (ICC) scaffold, a recent development, which allows high spatial organization, homotypic and heterotypic cell interaction, as well as cell-extracellular matrix (ECM) interaction. Herein, we describe a protocol to fabricate the ICC scaffold using poly (ethylene glycol) diacrylate (PEGDA) and the particle leaching method. Briefly, a lattice is made from microsphere particles, after which a pre-polymer solution is added, properly polymerized, and the particles are then removed, or leached, using an organic solvent (e.g., tetrahydrofuran). The dissolution of the lattice results in a highly porous scaffold with controlled pore sizes and interconnectivities that allow media to reach cells more easily. This unique structure allows high surface area for the cells to adhere to as well as easy communication between pores, and the ability to coat the PEGDA ICC scaffold with proteins also shows a marked effect on cell performance. We analyze the morphology of the scaffold as well as the hepatocarcinoma cell (Huh-7.5) behavior in terms of viability and function to explore the effect of ICC structure and ECM coatings. Overall, this paper provides a detailed protocol of an emerging scaffold that has wide applications in tissue engineering, especially liver tissue engineering.

Fabrication of Inverted Colloidal Crystal Polyethylene glycol Scaffold: A Three-dimensional Cell Culture Platform for Liver Tissue Engineering

This manuscript presents a detailed protocol for the fabrication of an emerging three-dimensional hepatocyte culture platform, the inverted colloidal crystal scaffold, and the concomitant techniques to assess hepatocyte behavior. The size-controllable pores, interconnectivity and ability to conjugate extracellular matrix proteins to the poly(ethylene glycol) (PEG) scaffold enhance Huh-7.5 cell performance.

המצאה של הפוך קולואיד קריסטל פולי (אתילן גליקול) פיגום: פלטפורמת תרבית תאים תלת ממדי עבור הנדסת רקמות כבדה

The ability to maintain hepatocyte function in vitro, for the purpose of testing xenobiotics&#39; cytotoxicity, studying virus infection and developing ...

Fabrication of Extracellular Matrix-derived Foams and Microcarriers as Tissue-specific Cell Culture and Delivery Platforms

Cell function is mediated by interactions with the extracellular matrix (ECM), which has complex tissue-specific composition and architecture. The focus of this article is on the methods for fabricating ECM-derived porous foams and microcarriers for use as biologically-relevant substrates in advanced 3D in vitro cell culture models or as pro-regenerative scaffolds and cell delivery systems for tissue engineering and regenerative medicine. Using decellularized tissues or purified insoluble collagen as a starting material, the techniques can be applied to synthesize a broad array of tissue-specific bioscaffolds with customizable geometries. The approach involves mechanical processing and mild enzymatic digestion to yield an ECM suspension that is used to fabricate the three-dimensional foams or microcarriers through controlled freezing and lyophilization procedures. These pure ECM-derived scaffolds are highly porous, yet stable without the need for chemical crosslinking agents or other additives that may negatively impact cell function. The scaffold properties can be tuned to some extent by varying factors such as the ECM suspension concentration, mechanical processing methods, or synthesis conditions. In general, the scaffolds are robust and easy to handle, and can be processed as tissues for most standard biological assays, providing a versatile and user-friendly 3D cell culture platform that mimics the native ECM composition. Overall, these straightforward methods for fabricating customized ECM-derived foams and microcarriers may be of interest to both biologists and biomedical engineers as tissue-specific cell-instructive platforms for in vitro and in vivo applications.

The tissue-specific extracellular matrix (ECM) is a key mediator of cell function. This article describes methods for synthesizing pure ECM-derived foams and microcarriers that are stable in culture without the need for chemical crosslinking for applications in advanced 3D in vitro cell culture models or as pro-regenerative bioscaffolds.

ייצור של תאי מטריקס הנגזרות קצפים Microcarriers כמו תרבית תאי רקמות ספציפיות פלטפורמות משלוח

Cell function is mediated by interactions with the extracellular matrix (ECM), which has complex tissue-specific composition and architecture. The focus ...

Isolation of Murine Adipose Tissue-derived Microvascular Fragments as Vascularization Units for Tissue Engineering

A functional microvascular network is of pivotal importance for the survival and integration of engineered tissue constructs. For this purpose, several angiogenic and prevascularization strategies have been established. However, most cell-based approaches include time-consuming in vitro steps for the formation of a microvascular network. Hence, they are not suitable for intraoperative one-step procedures. Adipose tissue-derived microvascular fragments (ad-MVF) represent promising vascularization units. They can be easily isolated from fat tissue and exhibit a functional microvessel morphology. Moreover, they rapidly reassemble into new microvascular networks after in vivo implantation. In addition, ad-MVF have been shown to induce lymphangiogenesis. Finally, they are a rich source of mesenchymal stem cells, which may further contribute to their high vascularization potential. In previous studies we have demonstrated the remarkable vascularization capacity of ad-MVF in engineered bone and skin substitutes. In the present study, we report on a standardized protocol for the enzymatic isolation of ad-MVF from murine fat tissue.

We present a protocol to isolate adipose tissue-derived microvascular fragments that represent promising vascularization units. They can be rapidly isolated, do not require in vitro processing and, thus, may be used for one-step prevascularization in different fields of tissue engineering.

בידוד של נגזרות רקמה שומנית Murine כלי דם שבר כיחידות כלי דם של הנדסת רקמות

A functional microvascular network is of pivotal importance for the survival and integration of engineered tissue constructs. For this purpose, several ...

Scalable Fabrication of Stretchable, Dual Channel, Microfluidic Organ Chips

A significant number of lead compounds fail in the pharmaceutical pipeline because animal studies often fail to predict clinical responses in human patients. Human Organ-on-a-Chip (Organ Chip) microfluidic cell culture devices, which provide an experimental in vitro platform to assess efficacy, toxicity, and pharmacokinetic (PK) profiles in humans, may be better predictors of therapeutic efficacy and safety in the clinic compared to animal studies. These devices may be used to model the function of virtually any organ type and can be fluidically linked through common endothelium-lined microchannels to perform in vitro studies on human organ-level and whole body-level physiology without having to conduct experiments on people. These Organ Chips consist of two perfused microfluidic channels separated by a permeable elastomeric membrane with organ-specific parenchymal cells on one side and microvascular endothelium on the other, which can be cyclically stretched to provide organ-specific mechanical cues (e.g., breathing motions in lung). This protocol details the fabrication of flexible, dual channel, Organ Chips through casting of parts using 3D printed molds, enabling combination of multiple casting and post-processing steps. Porous poly (dimethyl siloxane) (PDMS) membranes are cast with micrometer sized through-holes using silicon pillar arrays under compression. Fabrication and assembly of Organ Chips involves equipment and steps that can be implemented outside of a traditional cleanroom. This protocol provides researchers with access to Organ Chip technology for in vitro organ- and body-level studies in drug discovery, safety and efficacy testing, as well as mechanistic studies of fundamental biological processes.

Here, we present a protocol that describes the fabrication of stretchable, dual channel, organ chip microfluidic cell culture devices for recapitulating organ-level functionality in vitro.

ייצור מדרגי של הערוץ מתיחה, כפול, צ'יפס Microfluidic איברים

A significant number of lead compounds fail in the pharmaceutical pipeline because animal studies often fail to predict clinical responses in human ...