This work was supported by NIH-NIDCR IRO1DE019355 (MJ Yost, PI), and NSF-EPSCoR (EPS-0903795).

<ol>
	<li>Kundu, J., Pati, F., Hun Jeong, Y., Cho, D. W., Cho, D. W., Forgacs, G. a. b. o. r., Sun, W. e. i. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Biofabrication. , 23-46 (2013).</li><li>Vats, A., Tolley, N. S., Polak, J. M., Gough, J. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Scaffolds+and+biomaterials+for+tissue+engineering:+a+review+of+clinical+applications.">Scaffolds and biomaterials for tissue engineering: a review of clinical applications.</a> Clin. Otolaryngol. 28, 165-172 (2003).</li><li>Chan, B. P., Leong, K. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Scaffolding+in+tissue+engineering:+general+approaches+and+tissue-specific+considerations.">Scaffolding in tissue engineering: general approaches and tissue-specific considerations.</a> Eur Spine J. 17, s467-s479 (2008).</li><li>Salerno, A., Di Maio, E., Iannace, S., Netti, P. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Tailoring+the+pore+structure+of+PCL+scaffolds+for+tissue+engineering+prepared+via+gas+foaming+of+multi-phase+blends.">Tailoring the pore structure of PCL scaffolds for tissue engineering prepared via gas foaming of multi-phase blends.</a> J. Porous Mater. 19, 181-188 (2011).</li><li>Hasan, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Electrospun+scaffolds+for+tissue+engineering+of+vascular+grafts.">Electrospun scaffolds for tissue engineering of vascular grafts.</a> Acta Biomater. 10, 11-25 (2014).</li><li>Huang, Z. -. M., Zhang, Y. Z., Kotaki, M., Ramakrishna, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+review+on+polymer+nanofibers+by+electrospinning+and+their+applications+in+nanocomposites.">A review on polymer nanofibers by electrospinning and their applications in nanocomposites.</a> Compos. Sci. Technol. 63, 2223-2253 (2003).</li><li>Sell, S. A., McClure, M. J., Garg, K., Wolfe, P. S., Bowlin, G. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Electrospinning+of+collagen/biopolymers+for+regenerative+medicine+and+cardiovascular+tissue+engineering.">Electrospinning of collagen/biopolymers for regenerative medicine and cardiovascular tissue engineering.</a> Adv. Drug. Deliv. Rev. 61, 1007-1019 (2009).</li><li>Zheng, W., Zhang, W., Jiang, X. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Biomimetic+Collagen+Nanofibrous+Materials+for+Bone+Tissue+Engineering.">Biomimetic Collagen Nanofibrous Materials for Bone Tissue Engineering.</a> Adv. Eng. Mater. 12, B451-B466 (2010).</li><li>Cao, H., Kuboyama, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+biodegradable+porous+composite+scaffold+of+PGA/beta-TCP+for+bone+tissue+engineering.">A biodegradable porous composite scaffold of PGA/beta-TCP for bone tissue engineering.</a> Bone. 46, 386-395 (2010).</li><li>Ankam, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Substrate+topography+and+size+determine+the+fate+of+human+embryonic+stem+cells+to+neuronal+or+glial+lineage.">Substrate topography and size determine the fate of human embryonic stem cells to neuronal or glial lineage.</a> Acta Biomater. 9, 4535-4545 (2013).</li><li>Bose, S., Vahabzadeh, S., Bandyopadhyay, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Bone+tissue+engineering+using+3D+printing.">Bone tissue engineering using 3D printing.</a> Mater. Today. 16, 496-504 (2013).</li><li>Billiet, T., Vandenhaute, M., Schelfhout, J., Van Vlierberghe, S., Dubruel, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+review+of+trends+and+limitations+in+hydrogel-rapid+prototyping+for+tissue+engineering.">A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering.</a> Biomaterials. 33, 6020-6041 (2012).</li><li>Yost, M. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+novel+tubular+scaffold+for+cardiovascular+tissue+engineering.">A novel tubular scaffold for cardiovascular tissue engineering.</a> Tissue Eng. 10, 273-284 (2004).</li><li>Habeeb, A. J., Hiramoto, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Reaction+of+proteins+with+glutaraldehyde.">Reaction of proteins with glutaraldehyde.</a> Arch Biochem Biophys. 126, 16-26 (1968).</li><li>Tanford, C., Buzzell, J. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+Viscosity+of+Aqueous+Solutions+of+Bovine+Serum+Albumin+between+pH+4.3+and+10.5.">The Viscosity of Aqueous Solutions of Bovine Serum Albumin between pH 4.3 and 10.5.</a> J. Phys. Chem. 60, 225-231 (1956).</li><li>Yadav, S., Shire, S. J., Kalonia, D. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Viscosity+analysis+of+high+concentration+bovine+serum+albumin+aqueous+solutions.">Viscosity analysis of high concentration bovine serum albumin aqueous solutions.</a> Pharm Res. 28, 1973-1983 (2011).</li><li>Tobitani, A., Ross-Murphy, S. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+intrinsic+viscosity+of+polyelectrolytes+revisited.">The intrinsic viscosity of polyelectrolytes revisited.</a> Polym. Int. 44, 338-347 (1997).</li><li>Arakawa, T., Timasheff, S. N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Theory+of+protein+solubility.">Theory of protein solubility.</a> Methods Enzymol. 114, 49-77 (1985).</li><li>Migneault, I., Dartiguenave, C., Bertrand, M. J., Waldron, K. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Glutaraldehyde:+behavior+in+aqueous+solution,+reaction+with+proteins,+and+application+to+enzyme+crosslinking.">Glutaraldehyde: behavior in aqueous solution, reaction with proteins, and application to enzyme crosslinking.</a> Biotechniques. 37, 790-796 (2004).</li><li>Burmeister, J. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Glutaraldehyde+cross-linked+glutamate+oxidase+coated+microelectrode+arrays:+selectivity+and+resting+levels+of+glutamate+in+the+CNS.">Glutaraldehyde cross-linked glutamate oxidase coated microelectrode arrays: selectivity and resting levels of glutamate in the CNS.</a> ACS Chem Neurosci. 4, 721-728 (2013).</li><li>Chatterji, P. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Gelatin+with+hydrophilic/hydrophobic+grafts+and+glutaraldehyde+crosslinks.">Gelatin with hydrophilic/hydrophobic grafts and glutaraldehyde crosslinks.</a> J. Appl. Polym. Sci. 37, 2203-2212 (1989).</li><li>Freije, J. R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Chemically+modified,+immobilized+trypsin+reactor+with+improved+digestion+efficiency.">Chemically modified, immobilized trypsin reactor with improved digestion efficiency.</a> J Proteome Res. 4, 1805-1813 (2005).</li><li>Cunha-Filho, M. S., Alvarez-Lorenzo, C., Martinez-Pacheco, R., Landin, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Temperature-sensitive+gels+for+intratumoral+delivery+of+beta-lapachone:+effect+of+cyclodextrins+and+ethanol.">Temperature-sensitive gels for intratumoral delivery of beta-lapachone: effect of cyclodextrins and ethanol.</a> ScientificWorldJournal. 2012, 126723 (2012).</li><li>Basak, R., Bandyopadhyay, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Encapsulation+of+hydrophobic+drugs+in+Pluronic+F127+micelles:+effects+of+drug+hydrophobicity,+solution+temperature,+and+pH.">Encapsulation of hydrophobic drugs in Pluronic F127 micelles: effects of drug hydrophobicity, solution temperature, and pH.</a> Langmuir. 29, 4350-4356 (2013).</li></ol>

החוקרים אין לי מה לחשוף.

Biofabrication הוא שדה רב תחומית ביותר שבו עקרונות הביולוגיה וההנדסה למזג ליצור בחומרים מורכבים המחקות רקמות הילידים. כדי להשיג זאת, יש צורך לפתח טכניקות להשתמש במידע שנאסף רקמות in vivo ולתרגמו פיגום חוץ גופית. בדרך זו, פלטפורמה יכולה להיות מהונדסת דומה המאפיינים ה?...

בתחום הנדסת רקמות היכולת לפברק פיגומי רקמות היא חיונית. פיגום רקמות מתאים יש מבנה 3D, מורכב מחומרים ביולוגיים, ומחקתי באדריכלות רקמות vivo כדי להקל צמיחת תאים ורקמות שיפוץ. פיגום זה חייב לאפשר הובלה של חומרים מזינים ו הרחקת פסולת 1-4. אחד מכשולים העיקרי בייצור של פיגומים אלה הם היכולת לשחזר תכונות גיאומטריות ספציפיות לחומר ביולוגי. כמה טכניקות biofabrication דווחו לשלוט בתכונות הגיאומטריות של פיגומים אלו, דוגמאות הם electrospinning 5-8, ממס ליהוק 9, stereolithography 10, ו 3D-הדפסת 11, בין יתר. טכניקות אלו נופלים במתן העברה קל יחסית של מאפיינים אדריכליים פנימיים וחיצוניים לשליטה, הם יקרים, מוגבלים על ידי רזולוצית printability שלהם ( <em<html> &gt; למשל, מד זרבובית, הגבלת חומר), או לדרוש טכניקות שלאחר ייצור הדורש תקופה ארוכה של הזמן לייצר פיגומי קיימא 12. במערכות ייצור מסחריות רבות, יצירת חללים פנימיות, ערוצים, ותכונות מושגות באמצעות חול או חומרים נשלפים או הקרבה מתאימים אחרים. חלק המתכת או הפלסטיק נוצר סביב עובש החול, והפעם הוא הקרושה, בחול מוסר. ב הרבה באותו אופן, את הדור הבא של חומרים ביולוגיים צריך המקבילה biosand. לכן, גומי BSA פותח כתחליף biosand. גומי BSA הוא חומר שעוצבה זה מקרוב שמורכב אלבומין בסרום שור crosslinked עם glutaraldehyde. המטרה סופית הוא ליצור מחדש מאפיינים אדריכליים מסוימים לתוך פיגום קולגן מתכלה. המאפיינים של biorubber ההקרבה מקיימת נאמנות ממדים עם העובש של רקמה המקורית מתוארים. התחת = &quot;jove_content&quot;&gt; שילובים כמה ריכוזי BSA ו glutaraldehyde נבדקו באמצעות מגוון של ממיסים. חומר זה נוצר על ידי תגובה בין BSA ו glutaraldehyde. גומי BSA יכול להיות תגובה מוזרקת הגיאומטריות הסבוכות של תבניות רקמות. BSA Crosslinked הוא טריפסין יציב ולעכל בקלות על ידי האנזים בתנאי pH וטמפרטורה קל. לעומת זאת, סוג שלמים שאני קולגן הוא עמיד מאוד לעיכול טריפסין. תכונות אלו מהוונות להסיר את גומי BSA סלקטיבי עוזב את הקולגן מאחור. העבודה נוכחית כללה קביעת הפרמטרים האידיאליים צריכים להשיג עובש יציב שיכול לספק מאפיינים אדריכליים ספציפיים פיגום ביולוגי. התכונות הספציפיות אשר הוערכו כלל mixability, עיכול אנזים, נושאים עומס, ויכולת להיות תגובה מוזרקת לתוך תבנית שלילית. השילוב של BSA 30% ו -3% glutaraldehyde מילוי דרישות אלה. פרוטוקול זה מספק את necessהנחיות האר&quot;י ליצור פיגומים תלת ממדי אלה. אב הטיפוס כולל פיגום קולגן המייצג ארכיטקטורת קנים עם יבוא אחד ושני ערוצי זרימה בקטרים ​​של 4 ו 3 מ&quot;מ, בהתאמה. טכניקה זו יש פוטנציאל לחקות סביבות מיקרו מקרו של הרקמה של עניין. טכנולוגיה זו מספקת טכניקה מעשית לספק מאלפת גיאומטריות ספציפיות חומר מתכלה בתוך קל ומהיר יחסית עם איכות גבוהה, אשר יכול להיות מכוון לחקות את גמישות רקמות vivo ב ומאפיינים אחרים של הרקמה של עניין.

<table border="0" cellpadding="0" cellspacing="0" width="770">
	<tbody>
		<tr height="20">
			<td height="20" style="height:20px;width:281px;">Collagen type I</td>
			<td style="width:156px;"></td>
			<td style="width:116px;"></td>
			<td style="width:217px;">Collagen extracted from calf hide</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Hydrocloric Acid (HCl)</td>
			<td>Sigma-Aldrich</td>
			<td>7647-01-0</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Phosphate Buffer Solution (PBS Tablets)</td>
			<td>MP Biomedical</td>
			<td>U5378</td>
			<td>1 tablet per 100 mL makes 1XPBS</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Albumium from bovine serum (BSA)</td>
			<td>Sigma-Aldrich</td>
			<td>A9647</td>
			<td></td>
		</tr>
		<tr height="19">
			<td height="19" style="height:19px;">Glutaraldehyde</td>
			<td>Sigma -Aldrich</td>
			<td>G5882</td>
			<td>Toxic</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Lard</td>
			<td>Fields</td>
			<td>3090</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Stainless Steel Molds</td>
			<td></td>
			<td></td>
			<td>Milled using Microlution Machine</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Air Brush Kit</td>
			<td>Central Pneumatic</td>
			<td>47791</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Mixing Tip for double syringe</td>
			<td>Medmix</td>
			<td>ML2.5-16-LLM</td>
			<td>Mixer, DN2,5X16, 4:1 brown, med</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Small O ring for double syringe</td>
			<td>Medmix</td>
			<td>PPB-X05-04-02SM</td>
			<td>Piston B, 5mL, 4:1, PE natural</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Double Syringe cap&#160;</td>
			<td>Medmix</td>
			<td>VLX002-SM</td>
			<td>Cap, 4:1/10:1, PE brown, med</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Big O ring for double syringe</td>
			<td>Medmix</td>
			<td>PPA-X05-04-02SM</td>
			<td>Piston A, 5 mL, 4:1</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Double Syringe&#160;</td>
			<td>Medmix</td>
			<td>SDL X05-04-50M</td>
			<td>Double syringe, 5 mL, 4:1</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Double Syringe Dispenser</td>
			<td>Medmix</td>
			<td>DL05-0400M</td>
			<td>Dispenser, 5 mL, 4:1, med , plain</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Laminim</td>
			<td></td>
			<td></td>
			<td>3.6 mg/mL- extracted USC lab</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">20 mL Syringe Luer Lock Tip</td>
			<td>BD</td>
			<td>302830</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Luer Lock Caps</td>
			<td>Fisher</td>
			<td>JGTCBLLX</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">HEPES</td>
			<td>Sigma -Aldrich</td>
			<td>H4034</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Gibco Minimum Essential Media 10X (MEM)</td>
			<td>&#160;Life Technologies</td>
			<td>1143-030</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Trypsin</td>
			<td>Life Technologies</td>
			<td>27250-018</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">UV Crosslinker&#160;</td>
			<td>Spectroline UV</td>
			<td>XLE1000</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Sodium Cloride (NaCl)</td>
			<td>Fisher</td>
			<td>S271-10</td>
			<td>To prepare Mosconas</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Potassium chloride (KCl)</td>
			<td>Sigma -Aldrich</td>
			<td>P5405-250</td>
			<td>To prepare Mosconas</td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Sodium Bicarbonate (NaHCO3)</td>
			<td>Fisher</td>
			<td>BP328-500</td>
			<td>To prepare Mosconas</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Glucose</td>
			<td>Sigma -Aldrich</td>
			<td>G-8270</td>
			<td>To prepare Mosconas</td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;">Sodium Phosphate didasic (NaH2PO4)</td>
			<td>Sigma-Aldrich</td>
			<td>S-7907</td>
			<td>To prepare Mosconas</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Sterile Filter for syringes</td>
			<td>Corning</td>
			<td>431224</td>
			<td></td>
		</tr>
	</tbody>
</table>

three-dimensional biomimetic technology: novel biorubber creates defined micro- and macro-scale architectures in collagen hydrogels

פיגומי רקמות לשחק תפקיד מכריע בתהליך התחדשות רקמות. הפיגום האידיאלי חייב למלא מספר דרישות כמו רכב ראוי שיש, מודולוס ממוקד, מאפיינים אדריכליים מוגדרים היטב. Biomaterials כי לשחזר את הארכיטקטורה הפנימית של רקמת in vivo הם חיוניים לחקר מחלות כמו גם כדי להקל על התחדשות של רקמות רכות איבד פגום. טכניקה biofabrication פותחה רומן המשלב מצב הדמיה אמנות, תלת ממדי (3D) הדפסה, ופעילות אנזימטית סלקטיבית כדי ליצור דור חדש של חומרים ביולוגיים למחקר ויישום קליני. החומר שפותח, גומי שור סרום אלבומין, הוא תגובה מוזרקת לתוך תבנית המקיימת תכונות גיאומטריות ספציפיות. חומר הקרבה זה מאפשר ההעברה הנאותה מאפיינים אדריכליים לחומר פיגום טבעי. אב הטיפוס כולל פיגום קולגן 3D עם ערוצי מ&quot;מ 4 ו -3 כי represent ארכיטקטורה מסועפת. מאמר זה מדגיש את השימוש בטכניקת biofabrication זה ההדור של מבנים טבעיים. פרוטוקול זה מנצל תוכנה בעזרת מחשב (CAD) לייצר תבנית מוצקה אשר תהיה תגובה הזריק גומי BSA ואחריו העיכול אנזימטי של הגומי, עוזב המאפיינים האדריכליים שלה בתוך חומר הפיגום.

התוצאות מראה כי טכניקת biofabrication זו יעילה ביצירת פיגומי 3D שיכולים לחקות את הסידור המרחבי לראות רקמות vivo. המאפיינים אדריכליים הם פרמטרים חיוניים עבור יישום הנדסת רקמות, החלו למלא תפקיד מרכזי ביחסי גומלין תא vivo ב והפונקציונלי של הרקמה. <p class...

Watch this Scientific Journal Video about Three-dimensional Biomimetic Technology: Novel Biorubber Creates Defined Micro- and Macro-scale Architectures in Collagen Hydrogels at JoVE.com

Three-dimensional Biomimetic Technology: Novel Biorubber Creates Defined Micro- and Macro-scale Architectures in Collagen Hydrogels

An innovative biofabrication technique was developed to engineer three-dimensional constructs that resemble the architectural features, components, and mechanical properties of in vivo tissue. This technique features a newly developed sacrificial material, BSA rubber, which transfers detailed spatial features, reproducing the in vivo architectures of a wide variety of tissues.

תלת ממדי טכנולוגיה Biomimetic: רומן Biorubber יוצר מוגדרת מיקרו מאקרו בקנה מידה ארכיטקטורות ב הידרוג קולגן

Tissue scaffolds play a crucial role in the tissue regeneration process. The ideal scaffold must fulfill several requirements such as having proper ...

three-dimensional-biomimetic-technology-novel-biorubber-creates

Research

JoVE Journal

Bioengineering

9.1K Views.  Medical University of South Carolina. An innovative biofabrication technique was developed to engineer three-dimensional constructs that resemble the architectural features, components, and mechanical properties of in vivo tissue. This technique features a newly developed sacrificial material, BSA rubber, which transfers detailed spatial features, reproducing the in vivo architectures of a wide variety of tissues.

Video: Three-dimensional Biomimetic Technology: Novel Biorubber Creates Defined Micro- and Macro-scale Architectures in Collagen Hydrogels

Fabrication of Micro-tissues using Modules of Collagen Gel Containing Cells

This protocol describes the fabrication of a type of micro-tissues called modules.  The module approach generates uniform, scalable and vascularized tissues.  The modules can be made of collagen as well as other gelable or crosslinkable materials.  They are approximately 2 mm in length and 0.7 mm in diameter upon fabrication but shrink in size with embedded cells or when the modules are coated with endothelial cells.  The modules individually are small enough that the embedded cells are within the diffusion limit of oxygen and other nutrients but modules can be packed together to form larger tissues that are perfusable.  These tissues are modular in construction because different cell types can be embedded in or coated on the modules before they are packed together to form complex tissues.  There are three main steps to making the modules: (1) neutralizing the collagen and embedding cells in it, (2) gelling the collagen in the tube and cutting the modules and (3) coating the modules with endothelial cells.

Creation of micro-tissues using cylindrical collagen gels, called modules, that contain embedded cells and which surface is coated with endothelial cells.

ייצור של מיקרו-רקמות באמצעות מודולים של קולגן ג&#39;ל התאים המכילים

This protocol describes the fabrication of a type of micro-tissues called modules.  The module approach generates uniform, scalable and vascularized ...

Three-dimensional Optical-resolution Photoacoustic Microscopy

Optical microscopy, providing valuable insights at the cellular and organelle levels, has been widely recognized as an enabling biomedical technology. As the mainstays of in vivo three-dimensional (3-D) optical microscopy, single-/multi-photon fluorescence microscopy and optical coherence tomography (OCT) have demonstrated their extraordinary sensitivities to fluorescence and optical scattering contrasts, respectively. However, the optical absorption contrast of biological tissues, which encodes essential physiological/pathological information, has not yet been assessable. 
The emergence of biomedical photoacoustics has led to a new branch of optical microscopy optical-resolution photoacoustic microscopy (OR-PAM)1, where the optical irradiation is focused to the diffraction limit to achieve cellular1 or even subcellular2 level lateral resolution. As a valuable complement to existing optical microscopy technologies, OR-PAM brings in at least two novelties. First and most importantly, OR-PAM detects optical absorption contrasts with extraordinary sensitivity (i.e., 100%). Combining OR-PAM with fluorescence microscopy3 or with optical-scattering-based OCT4 (or with both) provides comprehensive optical properties of biological tissues. Second, OR-PAM encodes optical absorption into acoustic waves, in contrast to the pure optical processes in fluorescence microscopy and OCT, and provides background-free detection. The acoustic detection in OR-PAM mitigates the impacts of optical scattering on signal degradation and naturally eliminates possible interferences (i.e., crosstalks) between excitation and detection, which is a common problem in fluorescence microscopy due to the overlap between the excitation and fluorescence spectra. 
Unique for optical absorption imaging, OR-PAM has demonstrated broad biomedical applications since its invention, including, but not limited to, neurology5, 6, ophthalmology7, 8, vascular biology9, and dermatology10. In this video, we teach the system configuration and alignment of OR-PAM as well as the experimental procedures for in vivo functional microvascular imaging.

Optical-resolution photoacoustic microscopy (OR-PAM) is an emerging technology capable of imaging optical absorption contrasts in vivo with cellular resolution and sensitivity. Here, we provide a visualized instruction on the experimental protocols of OR-PAM, including system configuration, system alignment, typical in vivo experimental procedures, and functional imaging schemes.

תלת ממדית ברזולוציה אופטית photoacoustic מיקרוסקופית

Optical microscopy, providing valuable insights at the cellular and organelle levels, has been widely recognized as an enabling biomedical technology. As ...

Alginate Hydrogels for Three-Dimensional Organ Culture of Ovaries and Oviducts

Ovarian cancer is the fifth leading cause of cancer deaths in women and has a 63% mortality rate in the United States1. The cell type of origin for ovarian cancers is still in question and might be either the ovarian surface epithelium (OSE) or the distal epithelium of the fallopian tube fimbriae2,3. Culturing the normal cells as a primary culture in vitro will enable scientists to model specific changes that might lead to ovarian cancer in the distinct epithelium, thereby definitively determining the cell type of origin. This will allow development of more accurate biomarkers, animal models with tissue-specific gene changes, and better prevention strategies targeted to this disease.
Maintaining normal cells in alginate hydrogels promotes short term in vitro culture of cells in their three-dimensional context and permits introduction of plasmid DNA, siRNA, and small molecules. By culturing organs in pieces that are derived from strategic cuts using a scalpel, several cultures from a single organ can be generated, increasing the number of experiments from a single animal. These cuts model aspects of ovulation leading to proliferation of the OSE, which is associated with ovarian cancer formation. Cell types such as the OSE that do not grow well on plastic surfaces can be cultured using this method and facilitate investigation into normal cellular processes or the earliest events in cancer formation4.
Alginate hydrogels can be used to support the growth of many types of tissues5. Alginate is a linear polysaccharide composed of repeating units of &beta;-D-mannuronic acid and &alpha;-L-guluronic acid that can be crosslinked with calcium ions, resulting in a gentle gelling action that does not damage tissues6,7. Like other three-dimensional cell culture matrices such as Matrigel, alginate provides mechanical support for tissues; however, proteins are not reactive with the alginate matrix, and therefore alginate functions as a synthetic extracellular matrix that does not initiate cell signaling5. The alginate hydrogel floats in standard cell culture medium and supports the architecture of the tissue growth in vitro.
A method is presented for the preparation, separation, and embedding of ovarian and oviductal organ pieces into alginate hydrogels, which can be maintained in culture for up to two weeks. The enzymatic release of cells for analysis of proteins and RNA samples from the organ culture is also described. Finally, the growth of primary cell types is possible without genetic immortalization from mice and permits investigators to use knockout and transgenic mice.

Culture of normal cells in their three-dimensional context represents an alternative method to study early events required for cellular transformation and tumorigenesis. This method is used to grow normal ovarian and oviductal cells to study early events in ovarian cancer formation.

אלגינט הידרוג לתרבות תלת ממדי איברים של השחלות Oviducts

Ovarian cancer is the fifth leading cause of cancer deaths in women and has a 63% mortality rate in the United States1. The cell type of origin for ...

Planar and Three-Dimensional Printing of Conductive Inks

Printed electronics rely on low-cost, large-area fabrication routes to create flexible or multidimensional electronic, optoelectronic, and biomedical devices1-3. In this paper, we focus on one- (1D), two- (2D), and three-dimensional (3D) printing of conductive metallic inks in the form of flexible, stretchable, and spanning microelectrodes.
Direct-write assembly4,5 is a 1-to-3D printing technique that enables the fabrication of features ranging from simple lines to complex structures by the deposition of concentrated inks through fine nozzles (~0.1 - 250 &mu;m). This printing method consists of a computer-controlled 3-axis translation stage, an ink reservoir and nozzle, and 10x telescopic lens for visualization. Unlike inkjet printing, a droplet-based process, direct-write assembly involves the extrusion of ink filaments either in- or out-of-plane. The printed filaments typically conform to the nozzle size. Hence, microscale features (&lt; 1 &mu;m) can be patterned and assembled into larger arrays and multidimensional architectures.
In this paper, we first synthesize a highly concentrated silver nanoparticle ink for planar and 3D printing via direct-write assembly. Next, a standard protocol for printing microelectrodes in multidimensional motifs is demonstrated. Finally, applications of printed microelectrodes for electrically small antennas, solar cells, and light-emitting diodes are highlighted.

Planar and three-dimensional printing of conductive metallic inks is described. Our approach provides new avenues for fabricating printed electronic, optoelectronic, and biomedical devices in unusual layouts at the microscale.

הדפסה מישוריים תלת ממדי של דיו מוליך

Printed electronics rely on low-cost, large-area fabrication routes to create flexible or multidimensional electronic, optoelectronic, and biomedical ...

Cell Patterning on Photolithographically Defined 
Parylene-C: SiO2 Substrates

Cell patterning platforms support broad research goals, such as construction of predefined in vitro neuronal networks and the exploration of certain central aspects of cellular physiology. To easily combine cell patterning with Multi-Electrode Arrays (MEAs) and silicon-based &#8216;lab on a chip&#8217; technologies, a microfabrication-compatible protocol is required. We describe a method that utilizes deposition of the polymer parylene-C on SiO2&#160;wafers. Photolithography enables accurate and reliable patterning of parylene-C at micron-level resolution. Subsequent activation by immersion in fetal bovine serum (or another specific activation solution) results in a substrate in which cultured cells adhere to, or are repulsed by, parylene or SiO2 regions respectively. This technique has allowed patterning of a broad range of cell types (including primary murine hippocampal cells, HEK 293 cell line, human neuron-like teratocarcinoma cell line, primary murine cerebellar granule cells, and primary human glioma-derived stem-like cells). Interestingly, however, the platform is not universal; reflecting the importance of cell-specific adhesion molecules. This cell patterning process is cost effective, reliable, and importantly can be incorporated into standard microfabrication (chip manufacturing) protocols, paving the way for integration of microelectronic technology.

Cell Patterning on Photolithographically Defined 
Parylene-C: SiO2 Substrates

This protocol describes a microfabrication-compatible method for cell patterning on SiO2. A predefined parylene-C design is photolithographically printed on SiO2 wafers. Following incubation with serum (or other activation solution) cells adhere specifically to (and grow according to the conformity of) underlying parylene-C, whilst being repulsed by SiO2 regions.

תא דפוסים על photolithographically מוגדר Parylene-C: SiO<sub&gt; 2</sub&gt; מצעים

Cell patterning platforms support broad research goals, such as construction of predefined in vitro neuronal networks and the exploration of certain ...

Human Cartilage Tissue Fabrication Using Three-dimensional Inkjet Printing Technology

Bioprinting, which is based on thermal inkjet printing, is one of the most attractive enabling technologies in the field of tissue engineering and regenerative medicine. With digital control&#160;cells, scaffolds, and growth factors can be precisely deposited to the desired two-dimensional (2D) and three-dimensional (3D) locations rapidly. Therefore, this technology is an ideal approach to fabricate tissues mimicking their native anatomic structures. In order to engineer cartilage with native zonal organization, extracellular matrix composition (ECM), and mechanical properties, we developed a bioprinting platform using a commercial inkjet printer with simultaneous photopolymerization capable for 3D cartilage tissue engineering. Human chondrocytes suspended in poly(ethylene glycol) diacrylate (PEGDA) were printed for 3D neocartilage construction via layer-by-layer assembly. The printed cells were fixed at their original deposited positions, supported by the surrounding scaffold in simultaneous photopolymerization. The mechanical properties of the printed tissue were similar to the native cartilage. Compared to conventional tissue fabrication, which requires longer UV exposure, the viability of the printed cells with simultaneous photopolymerization was significantly higher. Printed neocartilage demonstrated excellent glycosaminoglycan (GAG) and collagen type II production, which was consistent with gene expression. Therefore, this platform is ideal for accurate cell distribution and arrangement for anatomic tissue engineering.

The methods described in this paper show how to convert a commercial inkjet printer into a bioprinter with simultaneous UV polymerization. The printer is capable of constructing 3D tissue structure with cells and biomaterials. The study demonstrated here constructed a 3D neocartilage.

ייצור רקמת סחוס אנושי באמצעות שלושה ממדי הזרקת דיו טכנולוגיית הדפסה

Bioprinting, which is based on thermal inkjet printing, is one of the most attractive enabling technologies in the field of tissue engineering and ...

Analysis of Cell Migration within a Three-dimensional Collagen Matrix

The ability to migrate is a hallmark of various cell types and plays a crucial role in several physiological processes, including&#160;embryonic development, wound healing, and immune responses. However, cell migration is also a key mechanism in cancer enabling these cancer cells to detach from the primary tumor to start metastatic spreading. Within the past years various cell migration assays have been developed to analyze the migratory behavior of different cell types. Because the locomotory behavior of cells markedly differs between a two-dimensional (2D) and three-dimensional (3D) environment it can be assumed that the analysis of the migration of cells that are embedded within a 3D environment would yield in more significant cell migration data. The advantage of the described 3D collagen matrix migration assay is that cells are embedded within a physiological 3D network of collagen fibers representing the major component of the extracellular matrix. Due to time-lapse video microscopy real cell migration is measured allowing the determination of several migration parameters as well as their alterations in response to pro-migratory factors or inhibitors. Various cell types could be analyzed using this technique, including lymphocytes/leukocytes, stem cells, and tumor cells. Likewise, also cell clusters or spheroids could be embedded within the collagen matrix concomitant with analysis of the emigration of single cells from the cell cluster/ spheroid into the collagen lattice. We conclude that the 3D collagen matrix migration assay is a versatile method to analyze the migration of cells within a physiological-like 3D environment.

Cell migration is a biological phenomenon that is involved in a plethora of physiological, such as wound healing and immune responses, and pathophysiological processes, like cancer. The 3D-collagen matrix migration assay is a versatile tool to analyze the migratory properties of different cell types within in a 3D physiological-like environment.

ניתוח של נדידת תאים בתוך קולגן מטריקס תלת ממדי

The ability to migrate is a hallmark of various cell types and plays a crucial role in several physiological processes, including&#160;embryonic ...

Generation of a Three-dimensional Full Thickness Skin Equivalent and Automated Wounding

In vitro models are a cost effective and ethical alternative to study cutaneous wound healing processes. Moreover, by using human cells, these models reflect the human wound situation better than animal models. Although two-dimensional models are widely used to investigate processes such as cellular migration and proliferation, models that are more complex are required to gain a deeper knowledge about wound healing. Besides a suitable model system, the generation of precise and reproducible wounds is crucial to ensure comparable results between different test runs. In this study, the generation of a three-dimensional full thickness skin equivalent to study wound healing is shown. The dermal part of the models is comprised of human dermal fibroblast embedded in a rat-tail collagen type I hydrogel. Following the inoculation with human epidermal keratinocytes and consequent culture at the air-liquid interface, a multilayered epidermis is formed on top of the models. To study the wound healing process, we additionally developed an automated wounding device, which generates standardized wounds in a sterile atmosphere.

The goal of this protocol is to build up a three-dimensional full thickness skin equivalent, which resembles natural skin. With a specifically constructed automated wounding device, precise and reproducible wounds can be generated under maintenance of sterility.

דור של עור בעובי מלא תלת ממדי Equivalent ואוטומטי פציעה

In vitro models are a cost effective and ethical alternative to study cutaneous wound healing processes. Moreover, by using human cells, these models ...

Melt Electrospinning Writing of Three-dimensional Poly(&#949;-caprolactone) Scaffolds with Controllable Morphologies for Tissue Engineering Applications

This tutorial reflects on the fundamental principles and guidelines for electrospinning writing with polymer melts, an additive manufacturing technology with great potential for biomedical applications. The technique facilitates the direct deposition of biocompatible polymer fibers to fabricate well-ordered scaffolds in the sub-micron to micro scale range. The establishment of a stable, viscoelastic, polymer jet between a spinneret and a collector is achieved using an applied voltage and can be direct-written. A significant benefit of a typical porous scaffold is a high surface-to-volume ratio which provides increased effective adhesion sites for cell attachment and growth. Controlling the printing process by fine-tuning the system parameters enables high reproducibility in the quality of the printed scaffolds. It also provides a flexible manufacturing platform for users to tailor the morphological structures of the scaffolds to their specific requirements. For this purpose, we present a protocol to obtain different fiber diameters using melt electrospinning writing (MEW) with a guided amendment of the parameters, including flow rate, voltage and collection speed. Furthermore, we demonstrate how to optimize the jet, discuss often experienced technical challenges, explain troubleshooting techniques and showcase a wide range of printable scaffold architectures.

This protocol serves as a comprehensive guideline to fabricate scaffolds via electrospinning with polymer melts in a direct writing mode. We systematically outline the process and define the appropriate parameter settings for achieving targeted scaffold architectures.

להמיס Electrospinning הכתיבה של פיגומים Poly(ε-caprolactone) תלת מימדי עם מורפולוגיות לשליטה עבור יישומי הנדסת רקמות

This tutorial reflects on the fundamental principles and guidelines for electrospinning writing with polymer melts, an additive manufacturing technology ...

Ultrathin Porated Elastic Hydrogels As a Biomimetic Basement Membrane for Dual Cell Culture

The basement membrane is a critical component of cellular bilayers that can vary in stiffness, composition, architecture, and porosity. In vitro studies of endothelial-epithelial bilayers have traditionally relied on permeable support models that enable bilayer culture, but permeable supports are limited in their ability to replicate the diversity of human basement membranes. In contrast, hydrogel models that require chemical synthesis are highly tunable and allow for modifications of both the material stiffness and the biochemical composition via incorporation of biomimetic peptides or proteins. However, traditional hydrogel models are limited in functionality because they lack pores for cell-cell contacts and functional in vitro migration studies. Additionally, due to the thickness of traditional hydrogels, incorporation of pores that span the entire thickness of hydrogels has been challenging. In the present study, we use poly-(ethylene-glycol) (PEG) hydrogels and a novel zinc oxide templating method to address the previous shortcomings of biomimetic hydrogels. As a result, we present an ultrathin, basement membrane-like hydrogel that permits the culture of confluent cellular bilayers on a customizable scaffold with variable pore architectures, mechanical properties, and biochemical composition.

Current bilayer culture models do not allow for functional in vitro studies that mimic in vivo microenvironments. Using polyethylene glycol and a zinc oxide templating method, this protocol describes the development of an ultrathin biomimetic basement membrane with tunable stiffness, porosity, and biochemical composition that closely mimics in vivo extracellular matrices.

תרבית תאים זגוגית אלסטי Porated Hydrogels כמו קרום המרתף ביונים עבור כפול

The basement membrane is a critical component of cellular bilayers that can vary in stiffness, composition, architecture, and porosity. In vitro studies ...