Sign In

Composite masonry walls combine multiple wythes of the same or different masonry materials to create a unified structure. These walls feature wythes that are bonded together either through mortar-filled collar joints, grouted spaces, or more commonly, with rigid metal ties and reinforcements, with the use of masonry header units being rare. Metal ties are preferred because they effectively minimize water penetration, as these walls primarily absorb moisture and then release it into the atmosphere.

Traditionally, composite walls might mix various materials, such as terra cotta, stone, or facing brick, with internal wythes made of bricks or hollow clay tile, aiming to achieve an optimal balance of appearance, durability, and cost-effectiveness. A classic example is a wall that combines a durable and aesthetically pleasing stone facade with an economical brick inner wythe, using metal ties for bonding. However, modern practices lean towards using uniform masonry types and metal ties over masonry headers for bonding wythes, particularly in load-bearing structures, to ensure consistent structural behavior throughout the wall. An example of this approach is a wall constructed from concrete masonry units for both wythes, bonded with reinforcements, mortar-filled collar joints, and metal ties.

Tags
Composite Masonry WallsMasonry MaterialsWythesMortar filled Collar JointsGrouted SpacesMetal TiesWater PenetrationMoisture AbsorptionDurabilityCost effectivenessStone FacadeBrick Inner WytheLoad bearing StructuresConcrete Masonry Units

From Chapter 2:

article

Now Playing

2.1 : Composite Masonry Walls

Masonry

394 Views

article

2.2 : Masonry Cavity Walls

Masonry

312 Views

article

2.3 : Masonry Loadbearing Walls

Masonry

77 Views

article

2.4 : Masonry Curtain Walls

Masonry

358 Views

article

2.5 : Posttensioned Masonry Walls

Masonry

88 Views

article

2.6 : Cavity Drainage and Flashings in Masonry walls

Masonry

56 Views

article

2.7 : Thermal Insulation in Masonry Walls

Masonry

89 Views

article

2.8 : Expansion and Contraction in Masonry Walls

Masonry

271 Views

article

2.9 : Movement Joints in Buildings

Masonry

81 Views

article

2.10 : Types of Building Separation Joints

Masonry

146 Views

article

2.11 : Efflorescence in Masonry

Masonry

55 Views

article

2.12 : Mortar Joint Deterioration in Masonry

Masonry

86 Views

article

2.13 : Masonry in Cold and Hot Weather Conditions

Masonry

62 Views

article

2.14 : Masonry Paving

Masonry

225 Views

JoVE Logo

Privacy

Terms of Use

Policies

Research

Education

ABOUT JoVE

Copyright © 2025 MyJoVE Corporation. All rights reserved