design-construction-artificial-extracellular-matrix-aecm-proteins

Design and Construction of Artificial Extracellular Matrix (aECM) Proteins from <em>Escherichia coli</em> for Skin Tissue Engineering

Recombinant technology is a versatile platform to create novel artificial proteins with tunable properties. For the last decade, many artificial proteins ...

Nanyang Technological University

Collective cell migration on artificial extracellular matrix proteins containing full-length fibronectin domains.

The processes of wound healing and collective cell migration have been studied for decades. Intensive research has been devoted to understanding the mechanisms involved in wound healing, but the role of cell-substrate interactions is still not thoroughly understood. Here we probe the role of cell-substrate interactions by examining in vitro the healing of monolayers of human corneal epithelial (HCE) cells cultured on artificial extracellular matrix (aECM) proteins. We find that the rate of wound healing is dependent on the concentration of fibronectin-derived (RGD) cell-adhesion ligands in the aECM substrate. The wound closure rate varies nearly sixfold on the substrates examined, despite the fact that the rates of migration and proliferation of individual cells show little sensitivity to the RGD concentration (which varies 40-fold). To explain this apparent contradiction, we study collective migration by means of a dynamic Monte Carlo simulation. The cells in the simulation spread, retract, and proliferate with probabilities obtained from a simple phenomenological model. The results indicate that the overall wound closure rate is determined primarily by the rate at which cells cross the boundary between the aECM protein and the matrix deposited under the cell sheet.

Boundary crossing in epithelial wound healing.

Described herein is the efficient synthesis and evaluation of bioactive arginine-glycine-aspartic acid (RGD) functionalized polynorbornene-based materials for cell adhesion and spreading. Polynorbornenes containing either linear or cyclic RGD peptides were synthesized by ring-opening metathesis polymerization (ROMP) using the well-defined ruthenium initiator [(H(2)IMes)(pyr)(2)(Cl)(2)Ru═CHPh]. The random copolymerization of three separate norbornene monomers allowed for the incorporation of water-soluble polyethylene glycol (PEG) moieties, RGD cell recognition motifs, and primary amines for postpolymerization cross-linking. Following polymer synthesis, thin-film hydrogels were formed by cross-linking with bis(sulfosuccinimidyl) suberate (BS(3)), and the ability of these materials to support human umbilical vein endothelial cell (HUVEC) adhesion and spreading was evaluated and quantified. When compared to control polymers containing either no peptide or a scrambled RDG peptide, polymers with linear or cyclic RGD at varying concentrations displayed excellent cell adhesive properties in both serum-supplemented and serum-free media. Polymers with cyclic RGD side chains maintained cell adhesion and exhibited comparable integrin binding at a 100-fold lower concentration than those carrying linear RGD peptides. The precise control of monomer incorporation enabled by ROMP allows for quantification of the impact of RGD structure and concentration on cell adhesion and spreading. The results presented here will serve to guide future efforts for the design of RGD functionalized materials with applications in surgery, tissue engineering, and regenerative medicine.

Synthesis and cell adhesive properties of linear and cyclic RGD functionalized polynorbornene thin films.

To develop novel elastin-like materials with antibacterial capabilities.

Elastin-based silver-binding proteins with antibacterial capabilities.

Despite the advanced detection and sterilization techniques available today, the sensitive diagnosis and complete elimination of bacterial infections remain a significant challenge. A strategy is reported for efficient bacterial capture (ca. 90%) based on the synergistic effect of the nanotopography and surface chemistry of the substrate on bacterial attachment and adhesion. The outstanding bacterial-capture capability of the functionalized nanostructured substrate enables rapid and highly sensitive bacterial detection down to trace concentrations of pathogenic bacteria (10 colony-forming units mL(-1)). In addition, this synergistic biocapture substrate can be used for efficient bacterial elimination and shows great potential for clinical antibacterial applications.

A synergistic capture strategy for enhanced detection and elimination of bacteria.

Cell-matrix interactions play critical roles in regulating cellular behavior in wound repair and regeneration of the human skin. In particular, human skin keratinocytes express several key integrins such as alpha5beta1, alpha3beta1, and alpha2beta1 for binding to the extracellular matrix (ECM) present in the basement membrane in uninjured skin. To mimic these key integrin-ECM interactions, artificial ECM (aECM) proteins containing functional domains derived from laminin 5, type IV collagen, fibronectin, and elastin are prepared. Human skin keratinocyte cell responses on the aECM proteins are specific to the cell-binding domain present in each construct. Keratinocyte attachment to the aECM protein substrates is also mediated by specific integrin-material interactions. In addition, the aECM proteins are able to support the proliferation of keratinocyte stem cells, demonstrating their promise for use in skin tissue engineering.

Human epidermal keratinocyte cell response on integrin-specific artificial extracellular matrix proteins.

In this work, a novel waste-to-resource strategy to convert waste bacteria into a useful class of cathode materials, lithium metal phosphate (LiMPO4; M = Fe, Mn), is presented. Escherichia coli (E. coli) bacteria used for removing phosphorus contamination from wastewater are harvested and used as precursors for the synthesis of LiMPO4. After annealing, LiFePO4 and LiMnPO4 nanoparticles with dimensions around 20 nm are obtained. These particles are found to be enveloped in a carbon layer with a thickness around 3-5 nm, generated through the decomposition of the organic matter from the bacterial cell cytoplasm. The battery performance for the LiFePO4 is evaluated. A high discharge capacity of 140 mAh g(-1) at 0.1 C with a flat plateau located at around 3.5 V is obtained. In addition, the synthesized particles display excellent stability and rate capabilities. Even under a high C rate of 10 C, a stable discharge capacity of 75.4 mAh g(-1) can still be achieved.

Recycling bacteria for the synthesis of LiMPO4 (M = Fe, Mn) nanostructures for high-power lithium batteries.

The coupling of proteins with self-assembly properties and proteins that are capable of recognizing and mineralizing specific inorganic species is a promising strategy for the synthesis of nanoscale materials with controllable morphology and functionality. Herein, GPG-AG3 protein fibers with both of these properties were constructed and served as templates for the synthesis of Pt and Pd nanotubes. The protein fibers of assembled GPG-AG3 were more than 10 μm long and had diameters of 20-50 nm. The as-synthesized Pt and Pd nanotubes were composed of dense layers of ~3-5 nm Pt and Pd nanoparticles. When tested as cathodes in lithium-O2 batteries, the porous Pt nanotubes showed low charge potentials of 3.8 V, with round-trip efficiencies of about 65% at a current density of 100 mA g(-1).

Platinum and palladium nanotubes based on genetically engineered elastin-mimetic fusion protein-fiber templates: synthesis and application in lithium-O₂ batteries.

Metal vanadium phosphates (MVP), particularly Li3V2(PO4)3 (LVP) and Na3V2(PO4)3 (NVP), are regarded as the next-generation cathode materials in lithium/sodium ion batteries. These materials possess desirable properties such as high stability, theoretical capacity, and operating voltages. Yet, low electrical/ionic conductivities of LVP and NVP have limited their applications in demanding devices such as electric vehicles. In this work, a novel synthesis route for the preparation of LVP/NVP micro/mesoporous 3D foams via assembly of elastin-like polypeptides is demonstrated. The as-synthesized MVP 3D foams consist of microporous networks of mesoporous nanofibers, where the surfaces of individual fibers are covered with MVP nanocrystallites. TEM images further reveal that LVP/NVP nanoparticles are about 100-200 nm in diameter, with each particle enveloped by a 5 nm thick carbon shell. The MVP 3D foams prepared in this work exhibit ultrafast rate capabilities (79 mA h g(-1) at 100C and 66 mA h g(-1) at 200C for LVP 3D foams; 73 mA h g(-1) at 100C and 51 mA h g(-1) at 200C for NVP 3D foams) and excellent cycle performance (almost 100% performance retention after 1000 cycles at 100C); their properties are far superior compared to current state-of-the-art active materials.

Eileen Fong

School of Materials Science and Engineering

Nanyang Technological University

Design and Construction of Artificial Extracellular Matrix (aECM) Proteins from Escherichia coli for Skin Tissue Engineering

Eileen Fong

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}School of Materials Science and Engineering

Nanyang Technological University

Design and Construction of Artificial Extracellular Matrix (aECM) Proteins from Escherichia coli for Skin Tissue Engineering

School of Materials Science and Engineering