extraction-lignin-with-high-o-4-content-mild-ethanol-extraction-its

Extraction of Lignin with High &#946;-O-4 Content by Mild Ethanol Extraction and Its Effect on the Depolymerization Yield

Lignin valorization strategies are a key factor for achieving more economically competitive biorefineries based on lignocellulosic biomass. Most of the ...

University of Groningen

Artificial metalloenzymes (ArMs) are hybrid catalysts that offer a unique opportunity to combine the superior performance of natural protein structures with the unnatural reactivity of transition-metal catalytic centers. Therefore, they provide the prospect of highly selective and active catalytic chemical conversions for which natural enzymes are unavailable. Herein, we show how by rationally combining robust site-specific phosphine bioconjugation methods and a lipid-binding protein (SCP-2L), an artificial rhodium hydroformylase was developed that displays remarkable activities and selectivities for the biphasic production of long-chain linear aldehydes under benign aqueous conditions. Overall, this study demonstrates that judiciously chosen protein-binding scaffolds can be adapted to obtain metalloenzymes that provide the reactivity of the introduced metal center combined with specifically intended product selectivity.

Enzyme Activity by Design: An Artificial Rhodium Hydroformylase for Linear Aldehydes.

5-Hydroxymethylfurfural (HMF) is a platform chemical that can be produced from renewable carbohydrate sources. HMF can be converted to 1,2,4-benzenetriol (BTO) which after catalytic hydrodeoxygenation provides a route to cyclohexanone and cyclohexanol. This mixture, known as KA oil, is an important feedstock for polymeric products such as nylons which use benzene as feedstock that is obtained from the BTX fraction produced in oil refineries. Therefore, the conversion of HMF to BTO provides a renewable, alternative route toward products such as nylons. However, BTO is usually considered an undesired byproduct in HMF synthesis and is only obtained in small amounts. Here, we show that Lewis acid catalysts can be utilized for the selective conversion of HMF to BTO in subsuper critical water. Overall, up to 54 mol % yield of BTO was achieved at 89% HMF conversion using ZnCl. ZnCl and similarly effective Zn(OTf) and Fe(OTf) are known as relatively soft Lewis acids. Other Lewis acid like Hf(OTf) and Sc(OTf) gave increased selectivity toward levulinic acid (up to 33 mol %) instead of BTO, a well-known HMF derivative typically obtained by acid catalysis. Catalytic hydrodeoxygenation of BTO toward cyclohexanone in water was achieved in up to 45% yield using 5 wt % Pd on AlO combined with AlCl or Al(OTf) as catalysts. Additionally, a mild selective oxygen induced dimerization pathway of BTO to 2,2',4,4',5,5'-hexahydroxybiphenyl (5,5'-BTO dimer) was identified.

Lewis Acid Catalyzed Conversion of 5-Hydroxymethylfurfural to 1,2,4-Benzenetriol, an Overlooked Biobased Compound.

The viability of several technical lignins as a source for biobased platform chemicals was investigated via hydrotreatment using a cheap Fe-based limonite catalyst and without using a solvent. In general, high-quality oils (up to 29 wt% total monomers) with an average relative composition of 55% alkylphenolics and 27% aromatics were obtained. Detailed structural investigations showed that the S-G aromatic unit content of the lignins was the most important factor positively affecting overall oil yields. A second parameter was the lignocellulose processing method. Even though alkaline lignin isolation provides more recalcitrant lignins, their lower aliphaticity and methoxy group content partially limit char and gas formation. Finally, enhanced monomer yields could be obtained irrespective of the ether linkage content, and a high amount of β-O-4 linkages actually showed a slightly negative effect on monomer yields. Overall, the results demonstrate that this route is particularly suitable for processing residual lignin streams.

Peter J. Deuss

Department of Chemical Engineering (ENTEG)

University of Groningen

Extraction of Lignin with High β-O-4 Content by Mild Ethanol Extraction and Its Effect on the Depolymerization Yield

Peter J. Deuss

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}Department of Chemical Engineering (ENTEG)

University of Groningen

Extraction of Lignin with High β-O-4 Content by Mild Ethanol Extraction and Its Effect on the Depolymerization Yield

Department of Chemical Engineering (ENTEG)