flash-nanoprecipitation-for-encapsulation-hydrophobic-hydrophilic

Flash NanoPrecipitation for the Encapsulation of Hydrophobic and Hydrophilic Compounds in Polymeric Nanoparticles

The formulation of a therapeutic compound into nanoparticles (NPs) can impart unique properties. For poorly water-soluble drugs, NP formulations can ...

synthesizing-lipid-nanoparticles-turbulent-flow-confined-impinging

Synthesizing Lipid Nanoparticles by Turbulent Flow in Confined Impinging Jet Mixers

Lipid nanoparticles (LNPs) have demonstrated their enormous potential as therapeutic delivery vehicles, as evidenced by the approval and global usage of ...

Princeton University

Photoacoustic (PA) imaging is an emerging hybrid optical-ultrasound based imaging technique that can be used to visualize optical absorbers in deep tissue. Free organic dyes can be used as PA contrast agents to concurrently provide additional physiological and molecular information during imaging, but their use in vivo is generally limited by rapid renal clearance for soluble dyes and by the difficulty of delivery for hydrophobic dyes. We here report the use of the block copolymer directed self-assembly process, Flash NanoPrecipitation (FNP), to form series of highly hydrophobic optical dyes into stable, biocompatible, and water-dispersible nanoparticles (NPs) with sizes from 38 to 88 nm and with polyethylene glycol (PEG) surface coatings suitable for in vivo use. The incorporation of dyes with absorption profiles within the infrared range, that is optimal for PA imaging, produces the PA activity of the particles. The hydrophobicity of the dyes allows their sequestration in the NP cores, so that they do not interfere with targeting, and high loadings of >75 wt % dye are achieved. The optical extinction coefficients (ε (mL mg(-1) cm(-1))) were essentially invariant to the loading of the dye in NP core. Co-encapsulation of dye with vitamin E or polystyrene demonstrates the ability to simultaneously image and deliver a second agent. The PEG chains on the NP surface were functionalized with folate to demonstrate folate-dependent targeting. The spectral separation of different dyes among different sets of particles enables multiplexed imaging, such as the simultaneous imaging of two sets of particles within the same animal. We provide the first demonstration of this capability with PA imaging, by simultaneously imaging nontargeted and folate-targeted nanoparticles within the same animal. These results highlight Flash NanoPrecipitation as a platform to develop photoacoustic tools with new diagnostic capabilities.

Narrow Absorption NIR Wavelength Organic Nanoparticles Enable Multiplexed Photoacoustic Imaging.

Nanoparticles (NP) are promising contrast agents for positron emission tomography (PET) radionuclide imaging that can increase signal intensity by localizing clusters of PET radionuclides together. However, methods to load NPs with PET radionuclides suffer from harsh loading conditions or poor loading efficacies or result in NP surface modifications that alter targeting in vivo. We present the formation of water-dispersible, polyethylene glycol coated NPs that encapsulate phthalocyanines into NP cores at greater than 50 wt % loading, using the self-assembly technique Flash NanoPrecipitation. Particles from 70 to 160 nm are produced. Phthalocyanine NPs rapidly and spontaneously chelate metals under mild conditions and can act as sinks for PET radionuclides such as 64-Cu to produce PET-active NPs. NPs chelate copper(II) with characteristic rates of 1845 M h at pH 6 and 37 °C, which produced >90% radionuclide chelation within 1 h. NP physical properties, such as core composition, core fluidity, and size, can be tuned to modulate chelation kinetics. These NPs retain Cu even in the presence of the strong chelator ethylene diamine tetraacetic acid. The development of these constructs for rapid and facile radionuclide labeling expands the applications of NP-based PET imaging.

Copper Loading of Preformed Nanoparticles for PET-Imaging Applications.

Hydrophobic ion pairing (HIP), a solubility engineering technique in which ionic hydrophilic molecules are paired with a hydrophobic counterion, is an attractive strategy for encapsulating ionic water-soluble species into nanocarriers (NCs). Drug release from NCs containing HIP complexes is sensitive to ionic strength, pH, and drug:counterion charge ratio, but the exact mechanism for this was unknown, as was the underlying microstructure inside the NCs. We hypothesize that HIP complexes arrange into liquid crystalline structures in NC cores and that these structures are responsible for salt- and pH-dependent release.

Internal liquid crystal structures in nanocarriers containing drug hydrophobic ion pairs dictate drug release.

Nanocarriers (NCs) are an attractive class of vehicles for drug delivery with the potential to improve drug efficacy and safety, particularly for intravenous parenteral delivery. Many therapeutics remain challenging to formulate in NCs due to their intrinsic solubilities that frustrate NC loading or result in too rapid release . Therapeutic conjugate approaches that alter the solubility of a conjugate "prodrug" have been used to enable NC formation and controlled release from NCs using labile linker chemistry. A limitation of this approach has been that a different linker chemistry must be used to produce an adjustable release rate for a single therapeutic. We report on a new approach where the therapeutic conjugate hydrolysis rates are varied by adjusting the excipient formulation of the NC core, not the conjugate linker chemistry. A hydrophobic therapeutic conjugate of camptothecin (PROCPT) is synthesized by conjugating camptothecin (CPT) with an acid derivative of α-tocopherol (vitamin E). The PROCPT compound can be loaded to 50% wt in poly(lactic acid)--poly(ethylene glycol) (PLA--PEG)-stabilized NCs produced by Flash NanoPrecipitation with particle diameters between 60 and 80 nm. Co-loading a zwitterionic lipid, 1-palmitoyl-2-oleoyl--3-phosphocholine, from 0 to 67% core loading tunes the PROCPT hydrolysis from no observable therapeutic release over 200 h to therapeutic conjugate half-life times of 31 h. For a single therapeutic conjugate molecule, the hydrolysis rate can be tuned by modifying the NC formulation with different excipient concentrations. NCs containing a 50% core loading of PROCPT were lyophilized and encapsulated in a PEG hydrogel matrix to make microparticles for depot delivery with an average diameter of 65 ± 10 μm that provide a sustained, first-order release of CPT with a therapeutic conjugate half-life of 240 h. These results demonstrate a new approach to the formulation of therapeutic NCs with variable release profiles using a single molecular entity therapeutic conjugate.

Encapsulation and Controlled Release of a Camptothecin Prodrug from Nanocarriers and Microgels: Tuning Release Rate with Nanocarrier Excipient Composition.

Photoacoustic (PA) imaging is a developing diagnostic technique where multiple species can be simultaneously imaged with high spatial resolution in 3D if the absorbance spectrum of each species is distinct and separable. However, multiplexed PA imaging has been greatly limited by the availability of spectrally separable contrast agents that can be used in vivo. Toward this end, we present the formation and application of a series of poly ethylene glycol (PEG)-coated nanoparticles (NPs) with unique separable absorbance profiles suitable for simultaneous multiplexed imaging. As a proof-of-concept, we demonstrate this form of mixed-sample multiplexed imaging, using cRGD peptide surface-modified NPs with nonmodified NPs in a murine subcutaneous Lewis lung carcinoma tumor model. The simultaneous imaging of nonmodified NPs provides an "internal standard", to deconvolute the contributions of active-ligand and passive-NP targeting effects. Particles with 25% surface cRGD modification display 52 ± 22 fold higher liver to tumor ratio accumulation levels, while the same set of particles display only 9.8 ± 4 fold accumulation levels when internally normalized. The pharmacokinetic profiles of targeted and nontargeted NPs can be simultaneously tracked in real-time to study how biodistribtions of particles are affected by ligand modification. The internal normalization of control particles greatly enhances the precision and decreases the number of animals needed in studies of nanoparticle targeting. These new dyes are an enabling technology for PA imaging of NP fate and targeting. This is the first demonstration of real-time multiplexed PA imaging of mixed-targeted samples in vivo.

Real-Time and Multiplexed Photoacoustic Imaging of Internally Normalized Mixed-Targeted Nanoparticles.

Chitosan-coated nanoparticles are a promising class of drug delivery vehicles that have been studied as tools for improving the gastrointestinal delivery of therapeutics. Here we present an analysis of chitosan-coated nanoparticles with an emphasis on characterizing the chitosan polymer properties. Cationic nanoparticles are produced by adsorbing a layer of chitosan HCl on an anionic (-40 mV ζ-potential) polyacrylic acid (PAA) coated primary nanoparticle. Commercially available chitosan (90% deacetylated) must be processed into a nearly completely deacetylated HCl salt form (99% deacetylation); otherwise, primary nanoparticle aggregation occurs. Deacetylated chitosan HCl produces stable, cationic (+35 mV ζ-potential) nanoparticles within 10% of the original anionic particle hydrodynamic diameter at a 1:2 molar ratio of chitosan glucosamine HCl monomers to PAA acrylic acid monomers.

Processing Chitosan for Preparing Chitosan-Functionalized Nanoparticles by Polyelectrolyte Adsorption.

Dynamic Light Scattering (DLS) generated particle size distributions (PSD) of polymer-stabilized nanoparticles are dependent on the optimization parameters used to generate an inversion solution fit to the measured autocorrelation function. The accuracy of the DLS PSD average and polydispersity can be determined by comparing analyzed Transmission Electron Microscopy (TEM) images with the DLS results if the TEM measured sizes can be corrected for the thickness of the hydrated polymer corona that impacts particle hydrodynamics but is a collapsed, desiccated shell in the TEM images.

Nanoparticle size distribution quantification from transmission electron microscopy (TEM) of ruthenium tetroxide stained polymeric nanoparticles.

Nanoparticle encapsulation is an attractive approach to improve the oral bioavailability of hydrophobic therapeutics. The high specific surface area of nanoparticle formulations, combined with the thermodynamically driven increased solubility of an amorphous drug core, promotes rapid drug dissolution. However, the physicochemical properties of the hydrophobic therapeutic can present obstacles to  characterization of nanoparticle formulations. Namely, drugs with low density and high membrane binding affinity frustrate traditional analytical methods to monitor release kinetics from nanoparticles. In this work, cannabidiol (CBD) was encapsulated into nanoparticles with low polydispersity and high drug loading via Flash NanoPrecipitation (FNP), a scalable self-assembly process. Hydroxypropyl methylcellulose acetate succinate (HPMCAS) and lecithin were employed as amphiphilic particle stabilizers during the FNP process. However, the low density and high membrane binding affinity of the amorphous CBD nanoparticle core prevented the characterization of  release kinetics by conventional methods. Released CBD could not be separated from intact nanoparticles by filtration or centrifugation. To address this challenge, an alternative approach is described to coencapsulate 6 nm hydrophobic FeO colloids with CBD during FNP. The FeO colloids were added at 33% by mass (approximately 20% by volume) to increase the density of the nanoparticles, resulting in particles with an average diameter of 160 nm (CBD-lecithin-FeO) or 280 nm (CBD-HPMCAS-FeO). This densification enabled the centrifugal separation of dissolved (released) CBD from unreleased CBD during the  assay while avoiding the losses associated with a filtration step. The resulting nanoparticle formulations provided more rapid and complete  dissolution kinetics than bulk CBD, representing a 6-fold improvement in dissolution compared to crystalline CBD. The coencapsulation of high-density FeO colloids to enable the separation of nanoparticles from release media is a novel approach to measuring  release kinetics of nanoencapsulated low-density, hydrophobic drug molecules.

Development of an  Release Assay for Low-Density Cannabidiol Nanoparticles Prepared by Flash NanoPrecipitation.

Flash NanoPrecipitation (FNP) is a scalable, single-step process that uses rapid mixing to prepare nanoparticles with a hydrophobic core and amphiphilic stabilizing shell. Because the two steps of particle self-assembly - (1) core nucleation and growth and (2) adsorption of a stabilizing polymer onto the growing core surface - occur simultaneously during FNP, nanoparticles formulated at core loadings above approximately 70% typically exhibit poor stability or do not form at all. Additionally, a fundamental limit on the concentration of total solids that can be introduced into the FNP process has been reported previously. These limits are believed to share a common mechanism: entrainment of the stabilizing polymer into the growing particle core, leading to destabilization and aggregation. Here, we demonstrate a variation of FNP which separates the nucleation and stabilization steps of particle formation into separate sequential mixers. This scheme allows the hydrophobic core to nucleate and grow in the first mixing chamber unimpeded by adsorption of the stabilizing polymer, which is later introduced to the growing nuclei in the second mixer. Using this Sequential Flash NanoPrecipitation (SNaP) technique, we formulate stable nanoparticles with up to 90% core loading by mass and at 6-fold higher total input solids concentrations than typically reported.

Sequential Flash NanoPrecipitation for the scalable formulation of stable core-shell nanoparticles with core loadings up to 90.

Delamanid (DLM) is a hydrophobic small molecule therapeutic used to treat drug-resistant tuberculosis (DR-TB). Due to its hydrophobicity and resulting poor aqueous solubility, formulation strategies such as amorphous solid dispersions (ASDs) have been investigated to enhance its aqueous dissolution kinetics and thereby improve oral bioavailability. However, ASD formulations are susceptible to temperature- and humidity-induced phase separation and recrystallization under harsh storage conditions typically encountered in areas with high tuberculosis incidence. Nanoencapsulation represents an alternative formulation strategy to increase aqueous dissolution kinetics while remaining stable at elevated temperature and humidity. The stabilizer layer coating the nanoparticle drug core limits the formation of large drug domains by diffusion during storage, representing an advantage over ASDs. Initial attempts to form DLM-loaded nanoparticles via precipitation-driven self-assembly were unsuccessful, as the trifluoromethyl and nitro functional groups present on DLM were thought to interfere with surface stabilizer attachment. Therefore, in this work, we investigated the nanoencapsulation of DLM via emulsification, avoiding the formation of a solid drug core and instead keeping DLM dissolved in a dichloromethane dispersed phase during nanoparticle formation. Initial emulsion formulation screening by probe-tip ultrasonication revealed that a 1:1 mass ratio of lecithin and HPMC stabilizers formed 250 nm size-stable emulsion droplets with 40% DLM loading. Scale-up studies were performed to produce nearly identical droplet size distribution at larger scale using high-pressure homogenization, a continuous and industrially scalable technique. The resulting emulsions were spray-dried to form a dried powder, and  dissolution studies showed dramatically enhanced dissolution kinetics compared to both as-received crystalline DLM and micronized crystalline DLM, owing to the increased specific surface area and partially amorphous character of the DLM-loaded nanoparticles. Solid-state NMR and dissolution studies showed good physical stability of the emulsion powders during accelerated stability testing (50 °C/75% RH, open vial).

Brian K. Wilson

Department of Chemical and Biological Engineering

Princeton University

Flash NanoPrecipitation for the Encapsulation of Hydrophobic and Hydrophilic Compounds in Polymeric Nanoparticles

Synthesizing Lipid Nanoparticles by Turbulent Flow in Confined Impinging Jet Mixers

Brian K. Wilson

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}Department of Chemical and Biological Engineering

Princeton University

Flash NanoPrecipitation for the Encapsulation of Hydrophobic and Hydrophilic Compounds in Polymeric Nanoparticles

Synthesizing Lipid Nanoparticles by Turbulent Flow in Confined Impinging Jet Mixers

Department of Chemical and Biological Engineering