JoVE Logo

サインイン

Uniform circular motion is motion in a circle at a constant speed. Although this is the simplest case of rotational motion, it is very useful for many situations and is used to introduce rotational variables. When a particle is moving in a circle, the coordinate system is fixed and serves as a frame of reference to define the particle’s position. Its position vector from the origin of the circle to the particle sweeps out the angle θ, which increases in the counterclockwise direction as the particle moves along its circular path. The angle θ is called the angular position of the particle. As the particle moves in its circular path, it also traces an arc length.

The angle θ, the angular position of a particle along its path, has units of radians (rad). There are 2π radians in 360°. Note that the radian measure is a ratio of length measurements and therefore is a dimensionless quantity. As a particle moves along its circular path, its angular position changes, and it undergoes angular displacements, Δθ.

The magnitude of the angular velocity, denoted by ω, is the rate of change of the angle θ as the particle moves in its circular path. The instantaneous angular velocity is defined as the limit in which Δt → 0 in the average angular velocity. The units of angular velocity are radians per second (rad/s). Angular velocity can also be referred to as the rotation rate in radians per second. In many situations, the rotation rate is defined in revolutions per second or cycles per second. To find the angular velocity, we must multiply revolutions/s by 2π, since there are 2π radians in one complete revolution. Since the direction of a positive angle in a circle is counterclockwise, we take counterclockwise rotations as being positive and clockwise rotations as negative.

This text is adapted from Openstax, University Physics Volume 1, Section 10.1: Rotational Variables.

タグ

Angular VelocityAngular DisplacementUniform Circular MotionRadiansRotation RateCounterclockwiseClockwise

章から 10:

article

Now Playing

10.1 : Angular Velocity and Displacement

回転と剛体

13.9K 閲覧数

article

10.2 : 角速度と加速度

回転と剛体

8.7K 閲覧数

article

10.3 : 一定の角加速度による回転 - I

回転と剛体

6.5K 閲覧数

article

10.4 : 一定の角加速度による回転 - II

回転と剛体

5.8K 閲覧数

article

10.5 : 角度量と線形量の関連付け - I

回転と剛体

6.4K 閲覧数

article

10.6 : 角度と線形の量の関連付け - II

回転と剛体

5.3K 閲覧数

article

10.7 : 慣性モーメント

回転と剛体

11.1K 閲覧数

article

10.8 : 慣性モーメントと回転運動エネルギー

回転と剛体

7.1K 閲覧数

article

10.9 : 慣性モーメント:計算

回転と剛体

6.6K 閲覧数

article

10.10 : 複合オブジェクトの慣性モーメント

回転と剛体

6.0K 閲覧数

article

10.11 : 平行軸定理

回転と剛体

6.3K 閲覧数

article

10.12 : 垂直軸定理

回転と剛体

2.6K 閲覧数

article

10.13 : 回転座標系におけるベクトル変換

回転と剛体

1.3K 閲覧数

article

10.14 : コリオリ力

回転と剛体

2.9K 閲覧数

JoVE Logo

個人情報保護方針

利用規約

一般データ保護規則

研究

教育

JoVEについて

Copyright © 2023 MyJoVE Corporation. All rights reserved