The Buckingham Pi theorem provides a structured method to simplify fluid dynamics problems by reducing complex systems of variables to dimensionless terms.

Equation 1

In analyzing flow through a pipe, variables that define the system include the pipe's diameter, the fluid's velocity, its density, and viscosity. These can be combined into a single dimensionless term, the Reynolds number (Re), which captures their essential relationship.

Equation 2

The first step in applying the Buckingham Pi theorem is identifying the fundamental dimensions of each variable. In fluid mechanics, these are typically mass, length, and time. Here, the diameter represents length, velocity combines length and time, density encompasses mass and volume, and viscosity incorporates mass, length, and time.

Equation 3

The theorem suggests that the number of independent dimensionless groups, known as Pi terms, is the difference in the number of variables k and the number of fundamental dimensions r. Only one dimensionless term is needed with four variables and three dimensions, simplifying analysis.

Equation 4

This single term, the Reynolds number, compares inertial forces to viscous forces in the fluid. Establishing this ratio reveals whether the flow is likely to be smooth and orderly, known as laminar flow, or chaotic and irregular, known as turbulent flow. Lower values indicate laminar flow, where viscous forces dominate, and the fluid moves in parallel layers. Higher values reflect turbulent flow, where inertial forces lead to chaotic motion. The Buckingham Pi theorem's application in this context reduces complex interactions to a single term, making it easier to generalize flow behavior under varying conditions.

章から 20:

article

Now Playing

20.2 : The Buckingham Pi Theorem

Dimensional Analysis, Similitude, and Modeling

36 閲覧数

article

20.1 : 寸法解析

Dimensional Analysis, Similitude, and Modeling

26 閲覧数

article

20.3 : 円周率の用語の決定

Dimensional Analysis, Similitude, and Modeling

14 閲覧数

article

20.4 : 流体力学における無次元群

Dimensional Analysis, Similitude, and Modeling

17 閲覧数

article

20.5 : 実験データの相関

Dimensional Analysis, Similitude, and Modeling

7 閲覧数

article

20.6 : モデリングと類似性

Dimensional Analysis, Similitude, and Modeling

19 閲覧数

article

20.7 : 典型的なモデルスタディ

Dimensional Analysis, Similitude, and Modeling

11 閲覧数

article

20.8 : 設計例: ダムの余水吐の水理モデルの作成

Dimensional Analysis, Similitude, and Modeling

22 閲覧数

JoVE Logo

個人情報保護方針

利用規約

一般データ保護規則

研究

教育

JoVEについて

Copyright © 2023 MyJoVE Corporation. All rights reserved