Turbulent flow is characterized by unpredictable fluctuations in velocity and pressure, which result in a chaotic fluid movement distinct from the orderly patterns of laminar flow. While laminar flow is governed by smooth, parallel layers with minimal mixing, turbulent flow exhibits highly irregular, three-dimensional patterns. This behavior arises due to instabilities in the fluid's velocity profile, and amplifies as the flow velocity increases. Minor disturbances, known as turbulent spots, appear once the flow reaches a critical speed. When the Reynolds number — a dimensionless quantity expressing the ratio of inertial to viscous forces in a fluid — exceeds a threshold of around 4,000, these spots coalesce, generating fully developed turbulence.

Structure of Turbulent Flow in Pipes

In pipe systems, turbulent flow comprises three distinct regions: the viscous sublayer, the buffer layer, and the outer layer. The viscous sublayer forms close to the pipe wall, a thin boundary where viscous forces dominate, and the flow behaves similarly to laminar flow. Here, velocity follows a near-linear profile influenced by fluid viscosity, providing a stable region within the otherwise chaotic turbulent flow.

Above the viscous sublayer lies the buffer layer, a transitional zone where viscous and turbulent forces contribute to fluid motion. This region is marked by a logarithmic velocity profile that conforms to the logarithmic law of the wall, representing a balance between viscous and turbulent interactions. Further from the wall, turbulent eddies drive fluid movement in the outer layer, promoting rapid mixing and random motion across the flow.

Engineering Applications of Turbulent Flow

The chaotic nature of turbulent flow makes it advantageous in numerous engineering applications where mixing and energy dissipation are crucial. For instance, wastewater treatment systems rely on turbulent flow to enhance the mixing of chemicals, promoting efficient contaminant removal. In hydraulic engineering, turbulent flow dissipates energy in spillways, preventing structural damage by controlling water velocity. The turbulent mixing process also reduces river sediment buildup, maintaining navigable waterways and protecting aquatic ecosystems.

章から 21:

article

Now Playing

21.5 : Turbulent Flow

Flow in Pipes

22 閲覧数

article

21.1 : パイプフローの一般的な特性I

Flow in Pipes

39 閲覧数

article

21.2 : パイプフローの一般特性II

Flow in Pipes

40 閲覧数

article

21.3 : 層流

Flow in Pipes

29 閲覧数

article

21.4 : 層流:問題解決

Flow in Pipes

19 閲覧数

article

21.6 : 乱流:問題解決

Flow in Pipes

13 閲覧数

article

21.7 : パイプの主な損失

Flow in Pipes

34 閲覧数

article

21.8 : パイプの軽微な損失

Flow in Pipes

35 閲覧数

article

21.9 : シングルパイプシステム

Flow in Pipes

13 閲覧数

article

21.10 : マルチパイプシステム

Flow in Pipes

24 閲覧数

article

21.11 : パイプ流量測定

Flow in Pipes

27 閲覧数

article

21.12 : パイプ流量測定:問題解決

Flow in Pipes

28 閲覧数

article

21.13 : 設計例: 住宅用配管システムの設計

Flow in Pipes

36 閲覧数

JoVE Logo

個人情報保護方針

利用規約

一般データ保護規則

研究

教育

JoVEについて

Copyright © 2023 MyJoVE Corporation. All rights reserved