Erratum: Synthesis and Structure Determination of µ-Conotoxin PIIIA Isomers with Different Disulfide Connectivities

要約

An erratum was issued for: Synthesis and Structure Determination of µ-Conotoxin PIIIA Isomers with Different Disulfide Connectivities. The Protocol and Materials sections were updated.

要約

An erratum was issued for: Synthesis and Structure Determination of µ-Conotoxin PIIIA Isomers with Different Disulfide Connectivities. The Protocol and Materials sections were updated.

Step 1.1.3 in the Protocol section was updated from:

Weigh the individual reagents (amino acids, HBTU (2-(1H-benzotriazol-1-yl)-1,1,3,3-tetramethyluronium hexafluorophosphate)) according to the protocol and dissolve them in dimethylformamide (DMF) to a final concentration of 2.4 M (amino acids) and 0.6 M (HBTU), respectively.

to:

Weigh the individual reagents (amino acids, HBTU (2-(1H-benzotriazol-1-yl)-1,1,3,3-tetramethyluronium hexafluorophosphate)) according to the protocol and dissolve them in dimethylformamide (DMF) to a final concentration of 0.6 M (amino acids) and 0.6 M (HBTU), respectively.

Step 1.2 in the Protocol section was updated from:

NOTE: The protocol applies to 100 mg of resin (loading: 0.28 mmol/g) added to one reaction column for 28 μmol scale.

to:

NOTE: The standardized protocol usually applies to 100 mg of resin (loading: 0.53 mmol/g) added to one reaction column for 53 μmol scale leading to the following equivalents: 5 eq. HBTU, 10 eq. NMM, 5 eq. amino acid. In case of PIIIA, however, a loading of 0.28 mmol/g (28 µmol scale) is used, which results in the specified higher equivalents.

Step 1.2.3.1 in the Protocol section was updated from:

HBTU (450 µL; 0.6 M in DMF; 270 µmol; 9.6 eq.), NMM (125 µL; 50% in DMF; 568 µmol; 20 eq.), Fmoc-amino acid (420 µL; 2.4 M in DMF; 1.01 mmol; 36 eq.).

to:

HBTU (415 µL; 0.6 M in DMF; 249 µmol; 9 eq.), NMM (112 µL; 50% in DMF; 510 µmol; 18 eq.), Fmoc-amino acid (420 µL; 0.6 M in DMF; 252 µmol; 9 eq.).

The first item in the Materials table was updated from:

Fmoc Rink amide resin

Novabiochem

855001

to:

PS PEG2000 Fmoc Rink-amide Resin

Varian, Inc.

PL3867-3764

AmphiSpheres 40 RAM

プロトコル

An erratum was issued for:Synthesis and Structure Determination of µ-Conotoxin PIIIA Isomers with Different Disulfide Connectivities. The Protocol and Materials sections were updated.

Step 1.1.3 in the Protocol section was updated from:

Weigh the individual reagents (amino acids, HBTU (2-(1H-benzotriazol-1-yl)-1,1,3,3-tetramethyluronium hexafluorophosphate)) according to the protocol and dissolve them in dimethylformamide (DMF) to a final concentration of 2.4 M (amino acids) and 0.6 M (HBTU), respectively.

to:

Weigh the individual reagents (amino acids, HBTU (2-(1H-benzotriazol-1-yl)-1,1,3,3-tetramethyluronium hexafluorophosphate)) according to the protocol and dissolve them in dimethylformamide (DMF) to a final concentration of 0.6 M (amino acids) and 0.6 M (HBTU), respectively.

Step 1.2 in the Protocol section was updated from:

NOTE: The protocol applies to 100 mg of resin (loading: 0.28 mmol/g) added to one reaction column for 28 μmol scale.

to:

NOTE: The standardized protocol usually applies to 100 mg of resin (loading: 0.53 mmol/g) added to one reaction column for 53 μmol scale leading to the following equivalents: 5 eq. HBTU, 10 eq. NMM, 5 eq. amino acid. In case of PIIIA, however, a loading of 0.28 mmol/g (28 µmol scale) is used, which results in the specified higher equivalents.

Step 1.2.3.1 in the Protocol section was updated from:

HBTU (450 µL; 0.6 M in DMF; 270 µmol; 9.6 eq.), NMM (125 µL; 50% in DMF; 568 µmol; 20 eq.), Fmoc-amino acid (420 µL; 2.4 M in DMF; 1.01 mmol; 36 eq.).

to:

HBTU (415 µL; 0.6 M in DMF; 249 µmol; 9 eq.), NMM (112 µL; 50% in DMF; 510 µmol; 18 eq.), Fmoc-amino acid (420 µL; 0.6 M in DMF; 252 µmol; 9 eq.).

The first item in the Materials table was updated from:

Fmoc Rink amide resin

Novabiochem

855001

to:

PS PEG2000 Fmoc Rink-amide Resin

Varian, Inc.

PL3867-3764

AmphiSpheres 40 RAM