Frank Rupp

Multifunctional nature of UV-irradiated nanocrystalline anatase thin films for biomedical applications.

Hydrophilicity of unset and set elastomeric impression materials.

Formation and photocatalytic decomposition of a pellicle on anatase surfaces.

Surface-immobilized PAMAM-dendrimers modified with cationic or anionic terminal functions: physicochemical surface properties and conformational changes after application of liquid interface stress.

Application times for the single-step/double-mix technique for impression materials in clinical practice.

Wetting behavior of dental implants.

The roles of titanium surface micro/nanotopography and wettability on the differential response of human osteoblast lineage cells.

A review on the wettability of dental implant surfaces I: theoretical and experimental aspects.

Bacterial interactions with proteins and cells relevant to the development of life-threatening endocarditis studied by use of a quartz-crystal microbalance.

A review on the wettability of dental implant surfaces II: Biological and clinical aspects.

UV-A and UV-C light induced hydrophilization of dental implants.

Photocatalytic antibacterial effects on TiO2-anatase upon UV-A and UV-A/VIS threshold irradiation.

Peri-implantitis cleaning instrumentation influences the integrity of photoactive nanocoatings.

Adhesion and friction of the smooth attachment system of the cockroach and the influence of the application of fluid adhesives.

Comparative evaluation of topographical data of dental implant surfaces applying optical interferometry and scanning electron microscopy.

Influence of Pre-Sintered Zirconia Surface Conditioning on Shear Bond Strength to Resin Cement.

Surface characteristics of dental implants: A review.

Characterisation of porous knitted titanium for replacement of intervertebral disc nucleus pulposus.

Mechanical Characteristics, In Vitro Degradation, Cytotoxicity, and Antibacterial Evaluation of Zn-4.0Ag Alloy as a Biodegradable Material.

Comparative Analysis of Mechanical Properties and Metal-Ceramic Bond Strength of Co-Cr Dental Alloy Fabricated by Different Manufacturing Processes.

Compatibility of a Silicone Impression/Adhesive System to FDM-Printed Tray Materials-A Laboratory Peel-off Study.

Saliva-coated titanium biosensor detects specific bacterial adhesion and bactericide caused mass loading upon cell death.

Carbon Fiber Reinforced PEEK Composites Based on 3D-Printing Technology for Orthopedic and Dental Applications.

Selection of extraction medium influences cytotoxicity of zinc and its alloys.

An In Vitro Study of Osteoblast Response on Fused-Filament Fabrication 3D Printed PEEK for Dental and Cranio-Maxillofacial Implants.

Evaluation of a Zn-2Ag-1.8Au-0.2V Alloy for Absorbable Biocompatible Materials.

Response of human periosteal cells to degradation products of zinc and its alloy.

Establishment of Collagen: Hydroxyapatite/BMP-2 Mimetic Peptide Composites.

Application of totarol as natural antibacterial coating on dental implants for prevention of peri-implantitis.

Correction: Li, P. et al. Mechanical Characteristics, In Vitro Degradation, Cytotoxicity, and Antibacterial Evaluation of Zn-4.0Ag Alloy as a Biodegradable Material. 2018, , 755.

Appropriately adapted properties of hot-extruded Zn-0.5Cu-xFe alloys aimed for biodegradable guided bone regeneration membrane application.

Microstructural, mechanical, in vitro corrosion and biological characterization of an extruded Zn-0.8Mg-0.2Sr (wt%) as an absorbable material.

Flowability, Tear Strength, and Hydrophilicity of Current Elastomers for Dental Impressions.

Synthesis and Characterization of a Novel Biocompatible Alloy, Ti-Nb-Zr-Ta-Sn.

Impact of sterilization treatments on biodegradability and cytocompatibility of zinc-based implant materials.

Tailoring the biologic responses of 3D printed PEEK medical implants by plasma functionalization.

Advanced co-culture model: Soft tissue cell and bacteria interactions at the transgingival dental implant interface.

Biological Performance of Titanium Surfaces with Different Hydrophilic and Nanotopographical Features.

A balance of biocompatibility and antibacterial capability of 3D printed PEEK implants with natural totarol coating.

Surface-Mediated Modulation of Different Biological Responses on Anatase-Coated Titanium.

Conventionally and digitally fabricated removable complete dentures: manufacturing accuracy, fracture resistance and repairability.