JoVE Logo

Sign In

6.4 : Method of Joints: Problem Solving I

The method of joints is a commonly used technique to analyze the forces in structural trusses. The method is based on the principle of equilibrium, which assumes that the truss members are connected by frictionless pins. The forces at each joint can be determined by considering the equilibrium of the forces acting on that joint. Consider a truss structure with two forces of 20 N and 10 N acting at joints C and D, respectively. The method of joints can be used to determine the forces FCB, FDC, FDB, and FAD.

Static equilibrium diagram; forces F1=20N, F2=10N in truss system; length 2m, height 1.5m.

To begin the analysis, a free-body diagram of joint C is considered, and force equilibrium conditions are applied. 

Static equilibrium formula ΣFx=0, equation for forces in mechanical balance studies.

Static equilibrium equation, ΣFy=0, describing vertical force balance in physics formula.

The horizontal force equilibrium condition gives FCB as zero. Similarly, the vertical force equilibrium condition is applied to calculate FDC as 20 N.

Next, a free-body diagram of joint D is considered. The angle between members BD and AD, calculated using the tan inverse of the ratio of the lengths of AB and AD, is 36.87°. The force FDB can be resolved into its horizontal and vertical components. Applying the vertical force equilibrium equation, FDB is calculated to be 33.33 N. Furthermore, the horizontal force equilibrium yields force FAD as 36.67 N.

As the force FDB points away from the joint, it is tensile. The force FDC is compressive as it points towards joint C. Also, FAD points towards joint D and is compressive.

Tags

Method Of JointsStructural TrussesForce AnalysisEquilibrium PrincipleFree body DiagramForce EquilibriumTensile ForceCompressive ForceJoint AnalysisTruss MembersHorizontal ComponentsVertical Components

From Chapter 6:

article

Now Playing

6.4 : Method of Joints: Problem Solving I

Structural Analysis

1.0K Views

article

6.1 : Introduction to Structures

Structural Analysis

980 Views

article

6.2 : Simple Trusses

Structural Analysis

1.6K Views

article

6.3 : Method of Joints

Structural Analysis

722 Views

article

6.5 : Method of Joints: Problem Solving II

Structural Analysis

512 Views

article

6.6 : Zero-Force Member

Structural Analysis

1.4K Views

article

6.7 : Method of Sections

Structural Analysis

583 Views

article

6.8 : Method of Sections: Problem Solving I

Structural Analysis

498 Views

article

6.9 : Method of Sections: Problem Solving II

Structural Analysis

924 Views

article

6.10 : Space Trusses

Structural Analysis

749 Views

article

6.11 : Space Trusses: Problem Solving

Structural Analysis

554 Views

article

6.12 : Frames

Structural Analysis

505 Views

article

6.13 : Frames: Problem Solving I

Structural Analysis

408 Views

article

6.14 : Frames: Problem Solving II

Structural Analysis

192 Views

article

6.15 : Machines

Structural Analysis

245 Views

See More

JoVE Logo

Privacy

Terms of Use

Policies

Research

Education

ABOUT JoVE

Copyright © 2025 MyJoVE Corporation. All rights reserved