Name: 비디오: Video Acquisition and Preparing the Videos for the MouseWalker (MW) Tracking Software
Uploaded: 2023-03-24T14:50:00

The video provides instructions for recording and processing animal behavior using video software. It details steps for configuring settings, filming animals on a walkway, capturing complete runs, and using ImageJ Fiji to select and save specific frames as image sequences for further analysis.

video acquisition and preparing the videos for the mousewalker (mw) tracking software

MouseWalker를 사용한 척수 손상 마우스의 운동 기능 장애 정량화

The effective coordination of four limbs is not unique to quadruped animals. Forelimb-hindlimb coordination in humans remains important to accomplish several tasks, such as swimming and alterations of speed while walking1. Various limb kinematic2 and motor program1,3,4, as well as proprioceptive feedback circuits5, are conserved between humans and other mammals&#160;and should be considered when analyzing therapeutic options for motor disorders, such as spinal cord injury (SCI)6,7,8.
In order to walk, several spinal connections from the forelimbs and hindlimbs need to be properly wired and rhythmically activated, which requires inputs from the brain and feedback from the somatosensory system2,9,10. These connections culminate in the central pattern generators (CPGs), which are situated at a cervical and lumbar level for the forelimbs and hindlimbs, respectively1,9,10. Often, after SCI, the disruption of neuronal connectivity and the formation of an inhibitory glial scar12 limit the recovery of locomotor function, with outcomes varying from total paralysis to restricted function of a group of limbs depending on the injury severity. Tools to precisely quantify locomotor function after SCI are critical for monitoring recovery and evaluating the effects of treatments or other clinical interventions6.
The standard metric assay for mouse contusion models of SCI is the Basso mouse scale (BMS)13,14, a non-parametric score that considers trunk stability, tail position, plantar stepping, and forelimb-hindlimb coordination in an open field arena. Even though the BMS is extremely reliable for most cases, it requires at least two experienced raters to observe all the angles of animal movement in order to account for natural variability and reduce bias.
Other assays have also been developed to assess motor performance after SCI quantitatively. These include the rotarod test, which measures time spent on a rotating cylinder15; the horizontal ladder, which measures the number of missed railings and positive ladder grabs16,17; and the beam walking test, which measures the time an animal takes and the number of failures it makes when crossing a narrow beam18. Despite reflecting a combination of motor deficits, none of these tests produce direct locomotor information about forelimb-hindlimb coordination.
To specifically and more thoroughly analyze walking behavior, other assays have been developed to reconstruct step cycles and gaiting strategies. One example is the footprint test, where the inked paws of an animal draw a pattern over a sheet of white paper19. Although simple in its execution, extracting kinematic parameters such as stride length is cumbersome and inaccurate. Moreover, the lack of dynamic parameters, such as the duration of the step cycle or leg-timed coordination, limits its applications; indeed, these dynamic parameters can only be acquired by analyzing frame-by-frame videos of rodents walking through a transparent surface. For SCI studies, researchers have analyzed walking behavior from a lateral view using a treadmill, including reconstructing the step cycle and measuring the angular variations of each leg joint4,20,21. Even though this approach can be extremely informative6, it remains focused on a specific set of limbs and lacks additional gait features, such as coordination.
To fill these gaps, Hamers and colleagues developed a quantitative test based on an optical touch sensor using frustrated total internal reflection (fTIR)22. In this method, light propagates through glass via internal reflection, becomes scattered upon paw pressing, and, finally, is captured by a high-speed camera. More recently, an open-source version of this method, called MouseWalker, was made available, and this approach combines an fTIR walkway with a tracking and quantification software package23. Using this method, the user can extract a large set of quantitative parameters, including step, spatial, and gait patterns, footprint positioning, and forelimb-hindlimb coordination, as well as visual outputs, such as footprint patterns (mimicking the inked paw assay6) or stance phases relative to the body axis. Importantly, due to its open-source nature, new parameters can be extracted by updating the MATLAB script package.
Here, the previously published assembly of the MouseWalker23 system is updated. A description of how to set it up is provided, with all the steps required to achieve the best video quality, tracking conditions, and parameter acquisition. Additional post-quantification tools are also shared to enhance the analysis of the MouseWalker (MW) output dataset. Finally, the usefulness of this tool is demonstrated by obtaining quantifiable values for general locomotor performance, specifically step cycles and forelimb-hindlimb coordination, in a spinal cord injury (SCI) context.

저자 스포트라이트: MouseWalker를 사용하여 척수 손상 마우스 모델에서 운동 기능 장애 정량화  

MouseWalker를 사용하여 척수 손상 마우스 모델에서 운동 기능 장애 정량화

In this study, we use a mouse model of spinal cord injury to uncover ways of promoting repair of the spinal cord that could lead to effective locomotor and functional sensory recovery. With a mouse walker, we can move a step forward into a more quantitative analysis of spinal cord recovery by combining several graphical outputs and kinematic parameters with a set of post-quantification tools. High quality video cameras and sophisticated software packages allow a more direct and quantitative description of motor activity.The mouse walker is a good example of this. Currently two main challenges exist. First, the ability of laboratories to implement these technologies in their experimental pipeline.And second, to reduce the time and steps from video recordings to data generation. We realized that standard protocols were insufficient to describe all locomotive deficits we see after spinal cord injury. We also found that the mouse walker helped us measure coordination, one of the hardest parameters to assess in standard tests.Here, not only is the software free and open source, but the hardware is also easy to assemble with uncomplicated materials. We also provide open source tools to analyze the mouse walker data. The mouse walker is a valuable method for studying other motor related or motor dysfunctions, not just spinal cord injury.It can also be used in combination with already established behavior protocols.

Watch this Scientific Journal Video about Video Acquisition and Preparing the Videos for the MouseWalker MW Tracking Software at JoVE.com

Video Acquisition and Preparing the Videos for the MouseWalker (MW) Tracking Software  

비디오 수집 및 MouseWalker(MW) 추적 소프트웨어용 비디오 준비

먼저 녹화 설정을 조정하여 비디오 녹화 소프트웨어에서 보도 영역을 자릅니다. 비디오 수집을 시작하고 동물을 산책로 가장자리에 놓습니다. 테스트하기 전에 동물이 방과 장치에 익숙해 졌는지 확인하십시오.동물을 촬영하는 동안 동물이 플랫폼의 맨 끝으로 이동하는지 확인하고 각 마우스의 완전한 실행을 충분히 촬영하십시오. 촬영된 실행을 이미지 시퀀스로 저장합니다. ImageJ Fiji 소프트웨어를 연 후 열린 이미지 파일을 한 번 확인하십시오.Image(이미지), Stack(스택), Tools(도구), Make a Substack(하위 스택 만들기)을 차례로 클릭하여 화면에서 마우스가 있는 프레임을 선택합니다. File(파일), Save As(다른 이름으로 저장), Image Sequence(이미지 시퀀스)를 차례로 클릭하여 각 하위 스택을 서로 다른 폴더에 개별적으로 저장합니다.

video-acquisition-preparing-videos-for-mousewalker-mw-tracking

Research

JoVE Journal

Neuroscience

Video Acquisition and Preparing the Videos for the MouseWalker (MW) Tracking Software

226 조회수.  Faculdade de Medicina da Universidade de Lisboa. 먼저 녹화 설정을 조정하여 비디오 녹화 소프트웨어에서 보도 영역을 자릅니다. 비디오 수집을 시작하고 동물을 산책로 가장자리에 놓습니다. 테스트하기 전에 동물이 방과 장치에 익숙해 졌는지 확인하십시오.동물을 촬영하는 동안 동물이 플랫폼의 맨 끝으로 이동하는지 확인하고 각 마우스의 완전한 실행을 충분히 촬영하십시오. 촬영된 실행을 이미지 시퀀스로 저?...

비디오: Video Acquisition and Preparing the Videos for the MouseWalker (MW) Tracking Software  

Using the MouseWalker to Quantify Locomotor Dysfunction in a Mouse Model of Spinal Cord Injury

The execution of complex and highly coordinated motor programs, such as walking and running, is dependent on the rhythmic activation of spinal and supra-spinal circuits. After a thoracic spinal cord injury, communication with upstream circuits is impaired. This, in turn, leads to a loss of coordination, with limited recovery potential. Hence, to better evaluate the degree of recovery after the administration of drugs or therapies, there is a necessity for new, more detailed, and accurate tools to quantify gait, limb coordination, and other fine aspects of locomotor behavior in animal models of spinal cord injury. Several assays have been developed over the years to quantitatively assess free-walking behavior in rodents; however, they usually lack direct measurements related to stepping gait strategies, footprint patterns, and coordination. To address these shortcomings, an updated version of the MouseWalker, which combines a frustrated total internal reflection (fTIR) walkway with tracking and quantification software, is provided. This open-source system has been adapted to extract several graphical outputs and kinematic parameters, and a set of post-quantification tools can be to analyze the output data provided. This manuscript also demonstrates how this method, allied with already established behavioral tests, quantitatively describes locomotor deficits following spinal cord injury.

An experimental pipeline to quantitatively describe the locomotor pattern of freely walking mice using the MouseWalker (MW) toolbox is provided, ranging from initial video recordings and tracking to post-quantification analysis. A spinal cord contusion injury model in mice is employed to demonstrate the usefulness of the MW system.

The execution of complex and highly coordinated motor programs, such as walking and running, is dependent on the rhythmic activation of spinal and ...

연구

신경과학

Setting Up of the MouseWalker (MW) Apparatus

Begin by assembling the MouseWalker Apparatus, as described elsewhere, or customize it to the specific needs of the experimental design. Set up the high-speed camera with a fast lens and a large aperture to capture more light, which helps record the Frustrated Total Internal Reflection or FTIR signals. With the room lights off, verify the light intensity of the background light box and walkway.Adjust the intensity if necessary by adding semi-opaque plastic or using a potentiometer. Position the lens correctly at the same height in the center of the 45 degree reflecting mirror and perpendicular to the walkway. Adjust the image contrast of the walkway by reducing or increasing the lighting.Then focus the lens on the surface of the plexiglass.

마우스워커(MW) 장치 설정

Begin by adjusting the recording settings to truncate the walkway region in the video recording software. Start the video acquisition and place the animal on the edge of the walkway. Ensure that the animals are familiar with the room and apparatus before testing.While filming the animals, make sure they move to the extreme edge of the platform and film enough complete runs of each mouse. Save the filmed runs as image sequences. After opening the ImageJ Fiji software, check the opened image file once.Select the frames in which the mouse is on the screen by clicking Image, Stack, Tools, and then Make a Substack. Save each substack separately in different folders by clicking on File, Save As, and then Image Sequence.

MouseWalker (MW) Video Tracking and Kinematic Data Analysis

In the computer, open MATLAB. Add the folder containing the MouseWalker script to the working directory and run MouseWalker. M on the main command line.Load the video folder as the input directory. Go to the Settings window where all the calibration and threshold parameters are located. Test the effect of changing some parameters by clicking the Preview button.After adjusting the threshold parameters, check that the video is ready for automated tracking. Go to the first frame and click auto to start tracking. After the tracking is completed, if required, perform a manual correction by selecting the appropriate footprint.Save the changes by pressing the Save button. Then, click evaluate to generate the output files from the tracked video. Check that all the graphical output data plots are saved in the Results folder.Next, check that all quantitative measurements generated by the MouseWalker software are saved on an Excel spreadsheet and summarized on 1.Information_Sheet. Use the MouseMultievaluate. M script to congregate the measurements from all the runs into a new file for analysis.To perform a principal component analysis, PCA, open pcaplotgenerator. py in Spyder and run the code by clicking on the Play button. Select the Excel file to analyze and the sheet name in the automatic window.If the sheet name is not altered, write Sheet 1. In the digital ink assay, a lack of support for the hind paws was detected. With a decrease in the footprint area for both the left and right hind paws.The overall stance traces displayed several unique features. After spinal cord injury, the hind paws had shorter stance traces and more random pore positioning at both touchdown and liftoff from 15 days post-injury. Principal component analysis of all the kinematic motor parameters showed a 40%variance in the data in the first component, which segregated the group of animals that had a spinal cord injury from the rest at all time points.Using other scripts such as the heat map script, it was found that the spinal cord injury animals showed alterations in the gait strategies at all time points. The spinal cord injury mice also displayed a lower stance straightness index in both the forelimbs and hindlimbs.