using-digital-image-correlation-to-characterize-local-strains-on

Using Digital Image Correlation to Characterize Local Strains on Vascular Tissue Specimens

Characterization of the mechanical behavior of biological and engineered soft tissues is a central component of fundamental biomedical research and ...

University of South Carolina

To meet demands of vascular reconstruction, there is a need for prosthetic alternatives to natural blood vessels. Here we explored a new conduit fabrication approach. Macroporous, gelatin microcarriers laden with human umbilical vein endothelial cells and aortic smooth muscle cells were dispensed into tubular agarose molds and found to adhere to form living tubular tissues. The ability of cellularized microcarriers to adhere to one another involved cellular and extracellular matrix bridging that included the formation of epithelium-like cell layers lining the lumenal and ablumenal surfaces of the constructs and the deposition of collagen and elastin fibers. The tubular tissues behaved as elastic solids, with a uniaxial mechanical response that is qualitatively similar to that of native vascular tissues and consistent with their elastin and collagen composition. Linearized measures of the mechanical response of the fabricated tubular tissues at both low and high strains were observed to increase with duration of static culture, with no significant loss of stiffness following decellularization. The findings highlight the utility of cellularized macroporous gelatin microcarriers as self-adhering building blocks for the fabrication of living tubular structures.

Cellularized microcarriers as adhesive building blocks for fabrication of tubular tissue constructs.

The mechanical response of arteries under physiological loads can be delineated into passive and active components. The passive response is governed by the load-bearing constituents within the arterial wall, elastin, collagen, and water, while the active response is a result of vascular smooth muscle cell (SMC) contraction. In muscular blood vessels, such as the primary renal artery, high SMC wall content suggests an elevated importance of the active response in determining overall vessel behavior. This study is a continuation of our previous investigation, in which a four-fiber constitutive model of the passive response of the primary porcine renal artery was identified. Here we focus on the active response of this vessel, specifically in the case of maximal SMC contraction, and develop a constitutive model of the active stress-stretch relations. The results of this study demonstrate the existence of biaxial active stress in the vessel wall, and suggest the active mechanical response is a critical component of renal arterial performance.

The biaxial active mechanical properties of the porcine primary renal artery.

Coronary artery bypass grafting (CABG) acutely disturbs the homeostatic state of the transplanted vessel making retention of graft patency dependent on chronic remodeling processes. The time course and extent to which remodeling restores vessel homeostasis will depend, in part, on the nature and magnitude of the mechanical disturbances induced upon transplantation. In this investigation, biaxial mechanical testing and histology were performed on the porcine left anterior descending artery (LAD) and analogs of common autografts, including the internal thoracic artery (ITA), radial artery (RA), great saphenous vein (GSV) and lateral saphenous vein (LSV). Experimental data were used to quantify the parameters of a structure-based constitutive model enabling prediction of the acute vessel mechanical response pre-transplantation and under coronary loading conditions. A novel metric Ξ was developed to quantify mechanical differences between each graft vessel in situ and the LAD in situ, while a second metric Ω compares the graft vessels in situ to their state under coronary loading. The relative values of these metrics among candidate autograft sources are consistent with vessel-specific variations in CABG clinical success rates with the ITA as the superior and GSV the inferior graft choices based on mechanical performance. This approach can be used to evaluate other candidate tissues for grafting or to aid in the development of synthetic and tissue engineered alternatives.

Boran Zhou

Biomedical Engineering Program

University of South Carolina

Using Digital Image Correlation to Characterize Local Strains on Vascular Tissue Specimens

Boran Zhou

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}Biomedical Engineering Program

University of South Carolina

Using Digital Image Correlation to Characterize Local Strains on Vascular Tissue Specimens

Biomedical Engineering Program