fabrication-ti3c2-mxene-microelectrode-arrays-for-vivo-neural

Fabrication of Ti3C2 MXene Microelectrode Arrays for In Vivo Neural Recording

Implantable microelectrode technologies have been widely used to elucidate neural dynamics at the microscale to gain a deeper understanding of the neural ...

University of Pennsylvania

Corporal Michael J. Crescenz Veterans Affairs Medical Center

Traumatic brain injury (TBI) is associated with a hypercoagulable state, the mechanism and duration of which remain unclear. We sought to determine whether thromboelastography (TEG) analysis could identify the hypercoagulable state after TBI, as defined by elevations in maximal amplitude (MA), thrombus generation (TG), G value (G), and alpha angle (αA).

Thromboelastography defines late hypercoagulability after TBI: a pilot study.

High-resolution neural interfaces are essential tools for studying and modulating neural circuits underlying brain function and disease. Because electrodes are miniaturized to achieve higher spatial resolution and channel count, maintaining low impedance and high signal quality becomes a significant challenge. Nanostructured materials can address this challenge because they combine high electrical conductivity with mechanical flexibility and can interact with biological systems on a molecular scale. Unfortunately, fabricating high-resolution neural interfaces from nanostructured materials is typically expensive and time-consuming and does not scale, which precludes translation beyond the benchtop. Two-dimensional (2D) TiC MXene possesses a combination of remarkably high volumetric capacitance, electrical conductivity, surface functionality, and processability in aqueous dispersions distinct among carbon-based nanomaterials. Here, we present a high-throughput microfabrication process for constructing TiC neuroelectronic devices and demonstrate their superior impedance and in vivo neural recording performance in comparison with standard metal microelectrodes. Specifically, when compared to gold microelectrodes of the same size, TiC electrodes exhibit a 4-fold reduction in interface impedance. Furthermore, intraoperative in vivo recordings from the brains of anesthetized rats at multiple spatial and temporal scales demonstrate that TiC electrodes exhibit lower baseline noise, higher signal-to-noise ratio, and reduced susceptibility to 60 Hz interference than gold electrodes. Finally, in neuronal biocompatibility studies, neurons cultured on TiC are as viable as those in control cultures, and they can adhere, grow axonal processes, and form functional networks. Overall, our results indicate that TiC MXene microelectrodes have the potential to become a powerful platform technology for high-resolution biological interfaces.

Two-Dimensional TiC MXene for High-Resolution Neural Interfaces.

Intracranial electrodes are a vital component of implantable neurodevices, both for acute diagnostics and chronic treatment with open and closed-loop neuromodulation. Their performance is hampered by acute implantation trauma and chronic inflammation in response to implanted materials and mechanical mismatch between stiff synthetic electrodes and pulsating, natural soft host neural tissue. Flexible electronics based on thin polymer films patterned with microscale conductive features can help alleviate the mechanically induced trauma; however, this strategy alone does not mitigate inflammation at the device-tissue interface. In this study, we propose a biomimetic approach that integrates microscale extracellular matrix (ECM) coatings on microfabricated flexible subdural microelectrodes. Taking advantage of a high-throughput process employing micro-transfer molding and excimer laser micromachining, we fabricate multi-channel subdural microelectrodes primarily composed of ECM protein material and demonstrate that the electrochemical and mechanical properties match those of standard, uncoated controls. In vivo ECoG recordings in rodent brain confirm that the ECM microelectrode coatings and the protein interface do not alter signal fidelity. Astrogliotic, foreign body reaction to ECM coated devices is reduced, compared to uncoated controls, at 7 and 30 days, after subdural implantation in rat somatosensory cortex. We propose microfabricated, flexible, biomimetic electrodes as a new strategy to reduce inflammation at the device-tissue interface and improve the long-term stability of implantable subdural electrodes.

Nicolette Driscoll

Department of Bioengineering,
Center for Neuroengineering and Therapeutics

University of Pennsylvania

Fabrication of Ti₃C₂ MXene Microelectrode Arrays for In Vivo Neural Recording

Nicolette Driscoll

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}Department of Bioengineering,Center for Neuroengineering and Therapeutics

University of Pennsylvania

Fabrication of Ti3C2 MXene Microelectrode Arrays for In Vivo Neural Recording

Department of Bioengineering,
Center for Neuroengineering and Therapeutics

Fabrication of Ti₃C₂ MXene Microelectrode Arrays for In Vivo Neural Recording