control-cell-adhesion-using-hydrogel-patterning-techniques-for

Control of Cell Adhesion using Hydrogel Patterning Techniques for Applications in Traction Force Microscopy

Traction force microscopy (TFM) is the main method used in mechanobiology to measure cell forces. Commonly this is being used for cells adhering to flat ...

Heidelberg University

Mammalian cells have evolved complex mechanical connections to their microenvironment, including focal adhesion clusters that physically connect the cytoskeleton and the extracellular matrix. This mechanical link is also part of the cellular machinery to transduce, sense and respond to external forces. Although methods to measure cell attachment and cellular traction forces are well established, these are not capable of quantifying force transmission through the cell body to adhesion sites. We here present a novel approach to quantify intracellular force transmission by combining microneedle shearing at the apical cell surface with traction force microscopy at the basal cell surface. The change of traction forces exerted by fibroblasts to underlying polyacrylamide substrates as a response to a known shear force exerted with a calibrated microneedle reveals that cells redistribute forces dynamically under external shearing and during sequential rupture of their adhesion sites. Our quantitative results demonstrate a transition from dipolar to monopolar traction patterns, an inhomogeneous distribution of the external shear force to the adhesion sites as well as dynamical changes in force loading prior to and after the rupture of single adhesion sites. Our strategy of combining traction force microscopy with external force application opens new perspectives for future studies of force transmission and mechanotransduction in cells.

Quantifying force transmission through fibroblasts: changes of traction forces under external shearing.

Essential cellular processes such as cell adhesion, migration and division strongly depend on mechanical forces. The standard method to measure cell forces is traction force microscopy (TFM) on soft elastic substrates with embedded marker beads. While in 2D TFM one only reconstructs tangential forces, in 2.5D TFM one also considers normal forces. Here we present a systematic comparison between two fundamentally different approaches to 2.5D TFM, which in particular require different methods to deal with noise in the displacement data. In the direct method, one calculates strain and stress tensors directly from the displacement data, which in principle requires a divergence correction. In the inverse method, one minimizes the difference between estimated and measured displacements, which requires some kind of regularization. By calculating the required Green's functions in Fourier space from Boussinesq-Cerruti potential functions, we first derive a new variant of 2.5D Fourier Transform Traction Cytometry (FTTC). To simulate realistic traction patterns, we make use of an analytical solution for Hertz-like adhesion patches. We find that FTTC works best if only tangential forces are reconstructed, that 2.5D FTTC is more precise for small noise, but that the performance of the direct method approaches the one of 2.5D FTTC for larger noise, before both fail for very large noise. Moreover we find that a divergence correction is not really needed for the direct method and that it profits more from increased resolution than the inverse method.

Johannes W. Blumberg

Institute for Theoretical Physics and BioQuant

Heidelberg University

Control of Cell Adhesion using Hydrogel Patterning Techniques for Applications in Traction Force Microscopy

Johannes W. Blumberg

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}Institute for Theoretical Physics and BioQuant

Heidelberg University

Control of Cell Adhesion using Hydrogel Patterning Techniques for Applications in Traction Force Microscopy

Institute for Theoretical Physics and BioQuant