organ-culture-whole-mount-immunofluorescence-staining-mouse-wolffian

Organ Culture and Whole Mount Immunofluorescence Staining of Mouse Wolffian Ducts

Tubal morphogenesis is a fundamental requirement for the development of most mammalian organs, including the male reproductive system. The epididymis, an ...

development-of-efficient-oleds-from-solution-deposition

Development of Efficient OLEDs from Solution Deposition

The use of highly efficient organic emitters based on the thermally activated delayed fluorescence (TADF) concept is interesting due to their 100% ...

University of Newcastle

University of Aveiro

CeNTI, Centre for Nanotechnologies and Smart Materials

To achieve significant efficiency and low roll-off in thermally activated delayed fluorescence (TADF) material organic light-emitting diodes (OLEDs), it is essential to choose a host that has suitable high triplet energy (T) and bipolar character to boost the TADF characteristics as a dopant and avoid exciton annihilation. Herein, we present the effect of different host materials on the efficiency of organic light-emitting diodes (OLEDs) based on bis[4-(3,6 dimethoxycarbazole)phenyl]sulfone (DMOC-DPS) deep-blue emitter. The devices with 10 wt.% of an emitter in different electron types of host bis[2-(diphenylphosphino) phenyl] ether oxide (DPEPO), and hole types of host 1,3-bis(-carbazolyl)benzene (mCP), were fabricated to study the effect on device performance. The results show that an external quantum efficiency (EQE) of 4% and maximum current efficiency (ƞ) up to 5.77 cd/A with high luminescence (l) 8185 cd/m in DPEPO was achieved, compared to 2.63% EQE, ƞ 4.12 cd/A with l 5338 cd/m in mCP in a very simple device structure. As a remarkable result, the roll-off is suppressed at 1000 cd/m, and for maximum brightness, the roll-off is less than 50%. Further general applications are discussed.

Effect of the Host on Deep-Blue Organic Light-Emitting Diodes Based on a TADF Emitter for Roll-Off Suppressing.

Organic light-emitting diodes (OLEDs) based on thermally activated delayed fluorescence emitters (TADF) in simple device structures fabricated by solution processing are strongly dependent on a suitable host molecular conformation and morphology. Herein, we report the fabrication of highly efficient yellow-red TADF-based OLEDs via solution processing in a simple, two-organic-layer device structure. The devices were fabricated at different weight concentrations of 5%, 8%, and 10% emitter in an n-/p-type mixed host matrix, and their characteristics were studied. The device performance was compared with different thickness parameters for both the emitting layer (EML) and the electron transport layer (ETL) in various solvents, including chlorobenzene, dichlorobenzene, and chloroform. By optimizing the mixed ratio of EML, yellow-red OLEDs of 2-[4 (diphenylamino)phenyl]-10,10-dioxide-9-thioxanthen-9-one (TXO-TPA) emitter in an n-/p-type host matrix of poly(-vinylcarbazole):1,3-Bis[2-(4-tert-butylphenyl)-1,3,4-oxadiazo-5-yl]benzene (PVK:OXD-7) as a blend for the active layer were fabricated. In the best results, the device exhibited a lower turn-on voltage at around 6 V, with an external quantum efficiency (EQE) of 18.44%, current efficiency of 36.71 cd/A, and power efficiency of 14.74 Lm/W for the 8% emitter concentration. The importance of solvent for improving the electrical properties, together with organic layer thickness and host effect for the charge carrier's transport and device characteristics are also discussed.

Towards Highly Efficient TADF Yellow-Red OLEDs Fabricated by Solution Deposition Methods: Critical Influence of the Active Layer Morphology.

Charge balance, concentration quenching, and exciton confinement are the most important factors for realizing the use of thermally activated delayed fluorescence (TADF) emitters for organic light-emitting diodes. Red-orange organic light-emitting diodes of a TADF emitter 2-[4 (diphenylamino)phenyl]-10,10-dioxide-9-thioxanthen-9-one (TXO-TPA) have been reported by doping in a mixed p-type host system of poly(-vinylcarbazole) (PVK) and 1,3-bis(-carbazolyl)benzene (mCP) via solution-processed. We have demonstrated the peak external quantum efficiency of 9.75%, maximum current efficiency of 19.36 cd/A, and power efficiency of 12.17 lm/W along with a CIE coordinate of (0.45, 0.51). The devices were compared with different doping concentrations of TXO-TPA, and a comparative investigation on the effect of the thickness electron transport layer was studied. The results clearly indicated that this solution-processed TXO-TPA device structure is a promising strategy to develop highly efficient but simple OLED structures.

Manish Kumar

Gynaecology Oncology Group,
School of Biomedical Sciences and Pharmacy,
Gynaecology Oncology Group, School of Biomedical Sciences and Pharmacy

University of Newcastle

Organ Culture and Whole Mount Immunofluorescence Staining of Mouse Wolffian Ducts

Development of Efficient OLEDs from Solution Deposition

Manish Kumar

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}Gynaecology Oncology Group,School of Biomedical Sciences and Pharmacy,Gynaecology Oncology Group, School of Biomedical Sciences and Pharmacy

University of Newcastle

Organ Culture and Whole Mount Immunofluorescence Staining of Mouse Wolffian Ducts

Development of Efficient OLEDs from Solution Deposition

Gynaecology Oncology Group,
School of Biomedical Sciences and Pharmacy,
Gynaecology Oncology Group, School of Biomedical Sciences and Pharmacy