characterization-electrode-materials-for-lithium-ion-sodium-ion

Characterization of Electrode Materials for Lithium Ion and Sodium Ion Batteries Using Synchrotron Radiation Techniques

Intercalation compounds such as transition metal oxides or phosphates are the most commonly used electrode materials in Li-ion and Na-ion batteries. ...

Haldor Topsøe A/S

An in situ mesopourous surface imprinted polymeric (SIP) sensor was synthesized for a highly sensitive, selective, and kinetically faster detection of the high-vapor-pressure nerve gas surrogate methyl salicylate (MES). Visual detection occurred on the filtrate thin films at 25 pM. Other nerve gas surrogates, TP, DMP, DMMP, PMP, and 1,4-thioxane, were tested and showed a decrease in sensitivity compared to MES. In addition, 2,6-dipicolinic acid (DPA), a biological indicator, was also investigated and showed a decrease in sensitivity compared to MES. Finally, the detection plateau was reached at 40 s and at 1.5 x 10(-4) M from pH 6-11.

Fluorescence resonance energy transfer based MCM-EDTA-Tb3+-MES sensor.

A basic approach was optimized for the synthesis of highly selective and sensitive in situ mesoporous (MCM) type imprinted silica polymers for the detection of dipicolinic acid (DPA) using europium as a reporter. DPA is a ubiquitous biochemical marker available during the germination event of endospore-forming bacteria such as Bacillus . Additionally, an MCM-MIP (molecularly imprinted polymeric phenomena) detector and a companion MCM-non-surface-MIP detector were synthesized using europium reporters for the sensing of DPA under optimized laboratory conditions. Our results showed that the in situ molecular imprinting process enabled rapid, selective detection of DPA with high sensitivity compared to MCM-MIP (imprinted for DPA; no DPA present), MCM-Non-MIP (no imprint present), and MCM-SR-MIP (imprinted with DPA present) detectors. The lower detection limit observed for DPA concentration is 5.49 × 10(-10) mol dm(-3) for MCM-MIP. The performance of the sensor in high-salt-water conditions, under photo-bleaching, and its reusability were also evaluated. The synthesized in situ MCM-MIP material should permit the detection of DPA for field assays related to suspect bacterial sporulation events.

Kinson C. Kam

Haldor Topsøe A/S

Characterization of Electrode Materials for Lithium Ion and Sodium Ion Batteries Using Synchrotron Radiation Techniques