We thank Deok Joong Lee for critical reading of the manuscript and testing the Python code. This research was sponsored by the National Research Foundation of Korea 2017R1A5A2015369 (K.-h.Y.) and 2019R1C1C1008708 (K.-h.Y.).

1. Setting up the imaging apparatus (Figure 1A-E)
<ol>
	<li>Ensure that a smartphone camera with the following minimum requirements is available: 
	12&#160;megapixel (MP) camera 
	1080p resolution video 
	5 GB&#160;of storage space (20 min video is 3-4 Gb) 
	Time-lapse video app from the application store (free applications available)</li>
	<li>Place the LED light box on the bottom rack of the 25 &#176;C incubator where the assay will take place.</li>
	<li>To hide the dotted pattern on the LED light surface, spread two sheets of tissues to cover the entire surface of the LED box.</li>
	<li>Make an elevated stage for the specimen (Figure 1A,D). The elevated stage is a clear plastic sheet supported by hollow rectangular tunnels. Tunnels function like a condenser to focus light, providing better contrast to the specimen (Figure 1C). Ensure that the tunnel&#39;s walls are somewhat dark to minimize light scatter. This study used brown paper boxes. The dimension of the tunnel is 5.5 cm x 17 cm x 4.5 cm (W x L x H). The LED light box can fit up to five tunnels.</li>
	<li>Place another rack above the stage to place the phones for recording (Figure 1B,E). Each phone will record three to six plates (one to two rows of three plates), so adjust the rack height accordingly. This will be approximately 15 cm above the specimen (Figure 1B).</li>
	<li>Put a power strip inside the incubator to plug in the phones during overnight recording.</li>
</ol>
2. Preparation of buffers and media
<ol>
	<li>Prepare M9 buffer by adding 3 g of KH2PO4, 6 g of Na2HPO4, and 5 g of NaCl to 1 L of distilled H2O. Sterilize by autoclaving at 121 &#176;C for 20 min. Cool the buffer and then add 1 mL of 1 M MgSO4.</li>
	<li>Prepare 1 M KPO4 buffer by adding 108.3 g of KH2PO4 and 35.6 g of K2HPO4 to 1 L of H2O. Adjust the pH to 6.0 by adding KOH. Sterilize by autoclaving.</li>
	<li>Prepare worm bleaching solution by mixing 1 mL of bleach, 0.4 mL of 1 M NaOH, and 2.6 mL of H2O.</li>
	<li>Prepare nematode growth media (NGM) agar plates.
	<ol>
		<li>Add 3 g of NaCl, 2.5 g of bacto peptone, and 17 g of bacto agar in a 3 L flask. Add 975 mL of distilled water and insert a stir bar.</li>
		<li>Sterilize by autoclaving, then cool to 55 &#176;C, and add 1 mL of cholesterol (5 mg/mL in ethanol), 1 mL of 1 M CaCl2, 1 mL of 1 M MgSO4, and 25 mL of 1 M KPO4 buffer (pH 6.0). Stir to mix well. Pour into 6 cm plates. Let the plates dry for at least 2 days.</li>
	</ol>
	</li>
	<li>Seed NGM agar plates with OP50 E. coli by pipetting approximately 1 mL of an overnight culture of OP50 to form a lawn of bacteria. Leave at room temperature (RT) until ready to use.</li>
</ol>
3. Preparation of high-peptone NGM plates (for PA14)
NOTE: These plates should be made at least 5 days before the assay.
<ol>
	<li>Make NGM containing 0.35% peptone. Mix 0.3 g of NaCl, 0.35 g of bacto peptone, and 1.7 g of bacto agar in a 250 mL Erlenmeyer flask. Add 97.5 mL of distilled water and insert a stir bar.</li>
	<li>Cover the mouth of the flask with aluminum foil and autoclave at 121 &#176;C for 20 min.</li>
	<li>Cool down to 55 &#176;C and add 0.1 mL of cholesterol (5 mg/mL in ethanol), 0.1 mL of 1 M CaCl2, 0.1 mL of 1 M MgSO4, and 2.5 mL of 1 M KPO4 buffer (pH 6.0). Stir to mix well.</li>
	<li>Pour high-peptone NGM into 35 mm Petri dishes.</li>
	<li>Dry the plates for at least 2 days.</li>
</ol>
4. Synchronizing worms by bleaching
NOTE: Start this step 3 days before the assay.
<ol>
	<li>Take plates with gravid adult worms and collect them into a 1.7 mL microtube by washing the plates with M9 buffer.</li>
	<li>Remove as much liquid as possible, then add 400 &#181;L of bleaching solution. Wait about 4-5 min with intermittent vortexing, until the adult worm bodies break, releasing the eggs.</li>
	<li>Add M9 buffer to fill the rest of the microtube to dilute the bleaching solution. Spin at maximum speed (12,000 to 13,000 x g) for 1-2 s. Remove the supernatant and wash three more times with M9 buffer.</li>
	<li>Transfer the eggs into an empty 35 mm Petri dish containing M9 buffer. Let the eggs hatch overnight at 20 &#176;C. In the absence of food, hatched worms will arrest at the L1 larval stage, synchronizing the developmental stage of all worms. 
	NOTE: Coating the 35 mm Petri dish with gelatin solution (0.05% gelatin in autoclaved water) can prevent the eggs from sticking to the bottom and minimize egg loss.</li>
	<li>The next day, transfer L1 stage worms to OP50 seeded NGM plates.</li>
	<li>Incubate the worms at 20 &#176;C for 53-54 h until the worms reach the L4 larval stage.</li>
</ol>
5. Preparation of bacteria (&#160;Pseudomonas aeruginosa, PA14)
NOTE: Start this step 4 days before the assay.
<ol>
	<li>Streak thawed bacteria from -80 &#176;C on a Luria Bertani (LB) agar plate without any antibiotic and incubate overnight at 37 &#176;C. 
	NOTE: Always use fresh bacteria. Streaked plates should be stored at 4 &#176;C for no more than 1 week.</li>
	<li>Inoculate a single colony into 3 mL of King&#39;s broth and grow overnight in a 37 &#176;C shaking incubator.</li>
	<li>The next day, seed 7 &#181;L of the overnight culture onto the high-peptone NGM plates and incubate at 37 &#176;C for 24 h.</li>
	<li>Move the seeded plates to RT and incubate for another 24 h before use. Once ready, use the plate within the next 24 h.</li>
</ol>
6. Preparing to record
NOTE: Do this right before the assay.
<ol>
	<li>Plug in the smartphone to the power strip connected to a power outlet. Make sure to disable the auto-lock setting to prevent the phone returning to the lock screen while recording.</li>
	<li>Open the time-lapse camera app and set the time-lapse interval to 2 s. Set the video quality to 1080p at 30 fps.</li>
	<li>Place the smartphone with the screen facing up to record with the back-facing camera. Check the screen to make sure that the paper box tunnels fit within the field of view.</li>
</ol>
7. Lawn avoidance assay
<ol>
	<li>Using a platinum wire pick, transfer 30 synchronized L4 stage worms (53-54 h from L1) to the PA14 plate. Place the worms in the middle of the bacteria lawn. For each condition in this study, two plates were tested (i.e., 60 worms per condition).</li>
	<li>Place the two plates on the elevated stage of the recording apparatus with the lid facing down. The side with the agar will be facing up toward the camera.</li>
	<li>On the smartphone screen, tap where the plate is, so the camera can focus on the assay plates. It helps to have a label or writing on the plate as the camera can use that to focus correctly. 
	NOTE: Writing on the bottom of the plates does not interfere with the imaging of worms as long as it is toward the edge. Fortunately, worms stay near the lawn even after they leave, so an unobstructed view is only needed of the immediate area surrounding the lawn.</li>
	<li>Start the recording.</li>
	<li>Once the recording has started, add more plates to the stage. There may be a significant lag time between the plates due to the time it takes to transfer worms by picking. Note the lag time afterward so that each condition can be counted at the time it began.</li>
	<li>Record for 20 h from the last set of plates placed on the stage. In the final time-lapse video, 20 h of recording will result in a 20 min long video. 
	NOTE: It may be worthwhile to count the worms directly from the plates after the assay, at least at the beginning for the first few occasions. This can be compared against values obtained through video imaging to ensure they yield similar numbers.</li>
</ol>
8. Processing of video using Python script
<ol>
	<li>Transfer the movie file to a computer for processing. The extension will be a MOV (iPhone) or MP4 file (Android).</li>
	<li>Use a Python code to process the videos. The code can be found at github.com/khyoon201/wormavoid.</li>
	<li>To run the Python scripts, ensure that the following are preinstalled on the computer: ffmpeg, a tool for converting video files (directions for installation can be found on its website, ffmpeg.org/download), and the Python packages os, pandas, tkinter, and ffmpeg-python.</li>
	<li>Find the dimensions and coordinates of each plate using the extract_frame.py script.
	<ol>
		<li>Run the extract_frame.py script. A window will appear to select the video file stored on the computer. After running is completed, a jpeg file with the same name will appear in the same directory.</li>
		<li>Open the jpeg file in ImageJ (imagej.org).</li>
		<li>From the menu, choose Analyze &#62; Set Measurements. Ensure that the Display Label box is checked (Figure 2A). Close the window.</li>
		<li>Using the Straight Line tool, measure the diameter of a plate by drawing a line across it, then choosing Analyze &#62; Measure from the menu. If the video is in 1080p, each plate will be about 480 pixels wide. Write this information down and close the Results window.</li>
		<li>Using the Multi-point tool, mark points on the upper left side of each plate. These points will become the upper left corner of the cropped videos (Figure 2B). The order matters; mark in order of when the plates were started. After creating a point for all the plates, choose Analyze &#62; Measure from the menu. Measurements, including the X and Y coordinates of the points, will appear in the Results window.</li>
		<li>To process multiple videos, repeat the process in ImageJ with other jpeg files. All X and Y coordinates will be listed in the same Results window.</li>
		<li>Save the Results window into a csv file. The file should be saved to the same directory as the movie files.</li>
	</ol>
	</li>
	<li>Find the starting time for each plate.
	<ol>
		<li>Play the movie, either on the computer or phone, and take note of the starting times of each set of plates placed under the camera.</li>
		<li>Open the Results.csv file with the coordinates and add a &#34;start&#34; column. For each row corresponding to individual plates, enter the appropriate start time, in seconds, under the &#34;start&#34; column (e.g., if the start time is 0:00:08, enter 8). Save. 
		NOTE: The column name must be &#34;start&#34; (in lower case, without quotation marks) to be recognized by the next script for cropping and trimming.</li>
	</ol>
	</li>
	<li>Crop and trim the videos.
	<ol>
		<li>Run the crop_n_trim.py script.</li>
		<li>When prompted, choose the Results.csv file. 
		NOTE: Make sure the Results.csv file and all the movie files are in the same directory.</li>
		<li>Enter the plate dimensions. Enter the pixel value noted earlier. 
		&#8203;NOTE: The script will now read each row of the Results.csv file to find the correct movie file by reading the file name in the &#34;label&#34; column, and crop according to the coordinates indicated in columns &#34;X&#34; and &#34;Y&#34;. The start time of each plate will be determined by the time indicated in the &#34;start&#34; column. After the script finishes running, a folder will appear with the same name as the movie, followed by the start time (e.g., &#34;Movie1_8&#34;), in which 10 s videos corresponding to each hourly time point of the assay will be saved.</li>
	</ol>
	</li>
</ol>
9. Manual counting using ImageJ
<ol>
	<li>Open each AVI file in ImageJ.</li>
	<li>Count the worms that are visible outside the lawn. Worms that are overlapped in one frame usually move apart in another frame so that they can be counted correctly.</li>
	<li>Calculate the occupancy rate for each time point: 
	Occupancy rate = (total worms - number of worms outside the lawn)/total worms 
	NOTE: The worms will move in and out of the lawn during the video, but this will not significantly alter the results. Try to go with the number that seems to be the average, or the number of worms at the exact hourly time point (5 s into the video).</li>
</ol>

Smartphone-Based Imaging for &lt;em&gt;C. elegans&lt;/em&gt; Lawn Avoidance Assay

<ol>
	<li>Pradel, E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Detection+and+avoidance+of+a+natural+product+from+the+pathogenic+bacterium+Serratia+marcescens+by+Caenorhabditis+elegans.">Detection and avoidance of a natural product from the pathogenic bacterium Serratia marcescens by Caenorhabditis elegans.</a> Proceedings of the National Academy of Sciences. 104 (7), 2295-2300 (2007).</li><li>Reddy, K. C., Hunter, R. C., Bhatla, N., Newman, D. K., Kim, D. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Caenorhabditis+elegans+NPR-1-mediated+behaviors+are+suppressed+in+the+presence+of+mucoid+bacteria.">Caenorhabditis elegans NPR-1-mediated behaviors are suppressed in the presence of mucoid bacteria.</a> Proceedings of the National Academy of Sciences. 108 (31), 12887-12892 (2011).</li><li>Hao, Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Thioredoxin+shapes+the+C.+elegans+sensory+response+to+Pseudomonas+produced+nitric+oxide.">Thioredoxin shapes the C. elegans sensory response to Pseudomonas produced nitric oxide.</a> eLife. 7, 36833 (2018).</li><li>Liu, Y., Samuel, B. S., Breen, P. C., Ruvkun, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Caenorhabditis+elegans+pathways+that+surveil+and+defend+mitochondria.">Caenorhabditis elegans pathways that surveil and defend mitochondria.</a> Nature. 508 (7496), 406-410 (2014).</li><li>Melo, J. A., Ruvkun, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Inactivation+of+conserved+C.+elegans+genes+engages+pathogen-+and+xenobiotic-associated+defenses.">Inactivation of conserved C. elegans genes engages pathogen- and xenobiotic-associated defenses.</a> Cell. 149 (2), 452-466 (2012).</li><li>Meisel, J. D., Panda, O., Mahanti, P., Schroeder, F. C., Kim, D. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Chemosensation+of+bacterial+secondary+metabolites+modulates+neuroendocrine+signaling+and+behavior+of+C.+elegans.">Chemosensation of bacterial secondary metabolites modulates neuroendocrine signaling and behavior of C. elegans.</a> Cell. 159 (2), 267-280 (2014).</li><li>Singh, J., Aballay, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Intestinal+infection+regulates+behavior+and+learning+via+neuroendocrine+signaling.">Intestinal infection regulates behavior and learning via neuroendocrine signaling.</a> eLife. 8, 50033 (2019).</li><li>Lee, K., Mylonakis, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+intestine-derived+neuropeptide+controls+avoidance+behavior+in+Caenorhabditis+elegans.">An intestine-derived neuropeptide controls avoidance behavior in Caenorhabditis elegans.</a> Cell Reports. 20 (10), 2501-2512 (2017).</li><li>Singh, J., Aballay, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Bacterial+lawn+avoidance+and+bacterial+two+choice+preference+assays+in+Caenorhabditis+elegans.">Bacterial lawn avoidance and bacterial two choice preference assays in Caenorhabditis elegans.</a> Bio-Protocol. 10 (10), 3623 (2020).</li><li>Reddy, K. C., Andersen, E. C., Kruglyak, L., Kim, D. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+polymorphism+in+npr-1+is+a+behavioral+determinant+of+pathogen+susceptibility+in+C.+elegans.">A polymorphism in npr-1 is a behavioral determinant of pathogen susceptibility in C. elegans.</a> Science. 323 (5912), 382-384 (2009).</li><li>de Bono, M., Bargmann, C. I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Natural+variation+in+a+neuropeptide+Y+receptor+homolog+modifies+social+behavior+and+food+response+in+C.+elegans.">Natural variation in a neuropeptide Y receptor homolog modifies social behavior and food response in C. elegans.</a> Cell. 94 (5), 679-689 (1998).</li><li>Mathew, M. D., Mathew, N. D., Ebert, P. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=WormScan:+a+technique+for+high-throughput+phenotypic+analysis+of+Caenorhabditis+elegans.">WormScan: a technique for high-throughput phenotypic analysis of Caenorhabditis elegans.</a> PLoS One. 7 (3), 33483 (2012).</li><li>Stroustrup, N., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+Caenorhabditis+elegans+lifespan+machine.">The Caenorhabditis elegans lifespan machine.</a> Nature Methods. 10 (7), 665-670 (2013).</li><li>Churgin, M. A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Longitudinal+imaging+of+Caenorhabditis+elegans+in+a+microfabricated+device+reveals+variation+in+behavioral+decline+during+aging.">Longitudinal imaging of Caenorhabditis elegans in a microfabricated device reveals variation in behavioral decline during aging.</a> eLife. 6, 26652 (2017).</li><li>Marquina-Solis, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Peptidergic+signaling+controls+the+dynamics+of+sickness+behavior+in+Caenorhabditis+elegans.">Peptidergic signaling controls the dynamics of sickness behavior in Caenorhabditis elegans.</a> bioRxiv. , (2022).</li><li>Churgin, M. A., Fang-Yen, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+imaging+system+for+monitoring+C.+elegans+behavior+and+aging.">An imaging system for monitoring C. elegans behavior and aging.</a> Methods in Molecular Biology. 2468, 329-338 (2022).</li><li>Barlow, I. L., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Megapixel+camera+arrays+enable+high-resolution+animal+tracking+in+multiwell+plates.">Megapixel camera arrays enable high-resolution animal tracking in multiwell plates.</a> Communications Biology. 5 (1), 253 (2022).</li><li>Kawazoe, Y., Yawo, H., Kimura, K. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+simple+optogenetic+system+for+behavioral+analysis+of+freely+moving+small+animals.">A simple optogenetic system for behavioral analysis of freely moving small animals.</a> Neuroscience Research. 75 (1), 65-68 (2013).</li></ol>

No conflicts of interest declared.

Imaging animal behavior, rather than relying on direct observation, is not only convenient but also has the advantage of leaving visual documentation. This allows for blind analysis by an objective third person, or could even be used for automated analysis using image recognition techniques. Despite the advantages, the standard equipment usually offered is high in cost, so one is committed to the setup once purchased.
Using smartphones to collect video recordings of simple C. elegans ...

Among the many advantages of studying C. elegans, its simple nervous system offers the opportunity to study how changes at the genetic and cellular level impact network function and behavioral output. Despite having a limited number of neurons, C. elegans display a wide range of complex behaviors. One of these is lawn avoidance, in which the bacterivorous nematode responds to a harmful food source by leaving the bacterial lawn. C. elegans avoid lawns of pathogenic bacteria1,2,3, lawns of bacteria that produce toxins or are spiked with toxins1,4, and even RNAi-expressing bacteria whose target gene knockdown is detrimental to the health of the worms4,5. Studies have shown that worms respond to external cues such as metabolites produced by the pathogenic bacteria1,6, or internal cues that indicate that the food is making them sick4,7. These cues are processed through conserved signaling pathways, such as the mitogen-activated protein kinase (MAPK) pathway and the transforming growth factor beta (TGF&#946;) pathway, and require communication between the gut and the nervous system4,6,7,8.
Although the assay is simple, the learned behavior develops over many hours, often overnight. While there are mutants that are incapable of leaving, in which case scoring avoidance at just one time point is sufficient to demonstrate the defect, many mutants do leave eventually but are slower to come out. For these, the movement of the worms needs to be tracked every few hours, which can be difficult to do overnight. Counting itself also takes time, creating a lag time between the plates, and thus limits the number of plates that can be tested at the same time. Using an imaging setup to record many plates simultaneously for the whole duration of the assay would be very useful, but the cost of setup can be prohibitive, depending on the funding situation of the research lab.
To address this, we devised a very simple method that uses smartphones to record avoidance assays. Each phone can record time-lapse videos of up to six assay plates. To provide transmitted light, we use a light emitting diode (LED) light box that can be easily purchased online. Assay plates are placed on an elevated platform, supported by hollow rectangular tunnels, that focus the incoming light, creating contrast. We also provide a Python script that converts the videos into audio video interleave (AVI) files showing 10 s clips of each hourly time point. The videos are then cropped to individual plates and saved in separate files to use for manual counting.
The method provides a low-cost procedure that is also extremely easy to use, using items that are readily available to most people. Here, we describe the method using the well-established lawn avoidance assay against the human pathogen Pseudomonas aeruginosa (PA14), whose protocol has been previously described2,9. Finally, we also review the considerations and limitations of the imaging method for those that want to apply it to other C. elegans behavior experiments.

<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>35 mm Petri dish</td>
			<td>SPL</td>
			<td>#10035</td>
			<td></td>
		</tr>
		<tr>
			<td>Bacto agar</td>
			<td>BD</td>
			<td>#214010</td>
			<td></td>
		</tr>
		<tr>
			<td>Bacto Peptone</td>
			<td>BD</td>
			<td>#211677</td>
			<td></td>
		</tr>
		<tr>
			<td>CaCl2</td>
			<td>DAEJUNG</td>
			<td>2507-1400</td>
			<td></td>
		</tr>
		<tr>
			<td>Cholesterol</td>
			<td>BioBasic</td>
			<td>CD0122</td>
			<td></td>
		</tr>
		<tr>
			<td>Dipotassium hydrogen phosphate (K2HPO4)</td>
			<td>JUNSEI</td>
			<td>84120-0350</td>
			<td></td>
		</tr>
		<tr>
			<td>Glycerol</td>
			<td>BioBasic</td>
			<td>GB0232</td>
			<td></td>
		</tr>
		<tr>
			<td>King B Broth</td>
			<td>MB cell</td>
			<td>MB-K0827</td>
			<td></td>
		</tr>
		<tr>
			<td>LED light box multi-pad</td>
			<td>Artmate</td>
			<td>N/A</td>
			<td>This is a USB powered, LED light pad for tracing and drawing purposes. Artmate is a Korean brand, but searching for &#34;LED light box for tracing&#34; in any search engine should yield numerous options from other brands. Overall dimension is around 9&#34; x 12&#34; (A4 size). For example, from amazon US: https://www.amazon.com/LITENERGY-Ultra-Thin-Adjustable-Streaming-Stenciling/dp/B07H7FLJX1/ref=sr_1_5?crid=YMYU0VYY226R&#38;keywords= 
			LED%2Blight%2Bbox&#38;qid=1674183224&#38;sprefix 
			=led%2Blight%2Bbo%2Caps%2C270&#38;sr=8-5&#38;th=1</td>
		</tr>
		<tr>
			<td>MgSO4</td>
			<td>DAEJUNG</td>
			<td>5514-4400</td>
			<td></td>
		</tr>
		<tr>
			<td>Plastic paper sleeve (clear)</td>
			<td>Smead</td>
			<td>#85753</td>
			<td>Any clear plastic sheet with a bit of stiffness can be used as stage. For example, from Amazon US: https://www.amazon.com/Smead-Organized-Translucent-Project-85753/dp/B07HJTRCT7/ref=psdc_1069554_t3_B09J48GXQ 
			8</td>
		</tr>
		<tr>
			<td>Potassium dihydrogen phosphate (KH2PO4)</td>
			<td>JUNSEI</td>
			<td>84185-0350</td>
			<td></td>
		</tr>
		<tr>
			<td>Power strip&#160;</td>
			<td></td>
			<td></td>
			<td>To accommodate 3 phones and one LED box, you need at least 4 outlets.</td>
		</tr>
		<tr>
			<td>Smartphone</td>
			<td>N/A</td>
			<td>N/A</td>
			<td>Minimum requirement: 12MP wide camera, 1080p HD video recording at 30fps</td>
		</tr>
		<tr>
			<td>Sodium chloride(NaCl)</td>
			<td>DAEJUNG</td>
			<td>#7548-4100</td>
			<td></td>
		</tr>
		<tr>
			<td>Sodium phosphate dibasic anhydrous (Na2HPO4)</td>
			<td>YAKURI</td>
			<td>#31727</td>
			<td></td>
		</tr>
	</tbody>
</table>

a smartphone-based imaging method for c. elegans lawn avoidance assay

When exposed to toxic or pathogenic bacteria, the nematode Caenorhabditis elegans displays a learned lawn avoidance behavior, in which the worms gradually leave their food source and prefer to remain outside the bacterial lawn. The assay is an easy way to test the worms' ability to sense external or internal cues to properly respond to harmful conditions. Though a simple assay, counting is time consuming, particularly with multiple samples, and assay durations that span overnight are inconvenient for researchers. An imaging system that can image many plates over a long period is useful but costly. Here, we describe a smartphone-based imaging method to record lawn avoidance in C. elegans. The method requires only a smartphone and a light emitting diode (LED) light box, to serve as a transmitted light source. Using free time-lapse camera applications, each phone can image up to six plates, with sufficient sharpness and contrast to manually count worms outside the lawn. The resulting movies are processed into 10 s audio video interleave (AVI) files for every hourly time point, then cropped to show each single plate to make them more amenable for counting. This method is a cost-effective way for those looking to examine avoidance defects and can potentially be extended to other C. elegans assays.

Author Spotlight: A Smartphone-Based Imaging Method for C. elegans Lawn Avoidance Assay  

A Smartphone-Based Imaging Method for C. elegans Lawn Avoidance Assay

Among the many behaviors displayed by C-elegans, pathogenic lawn avoidance is the worm's defense strategy to minimize its exposure to harmful pathogens. In our lab, we use this behavior as a tool to identify genes involved in the proper functioning of the neurons that mediate this behavior. The lawn avoidance behavior is a simple assay, however it develops over many hours.Hence, it is convenient if the assay can be recorded to observe behavior over long time periods. Also, if multiple assays can be recorded at the same time, that's even better. Although there are many imaging solutions described in the literature, even a few modestly priced cameras may be out of reach for labs with limited resources.Also, some may want to try the assay, but do not plan on doing it long term. For such cases, short-term solutions such as this protocol might help. Our amazing protocol offers an easy, low cost way to record worm behavior.We use smartphones to record the assay, then process the video through a Python script that makes it suitable for counting.

The first video produced by the script is 1 h from the start of the assay. The video for 0 h is not saved, as worms start the assay inside the lawn, so the occupancy rate is always 100%.
Wild-type N2 worms are compared against npr-1 mutants, whose lawn avoidance defect is well-established in the literature6,10 (Figure 3A-E). As can be seen in the wild type, worms ...

Watch this Scientific Journal Video about A Smartphone-Based Imaging Method for C. elegans Lawn Avoidance Assay at JoVE.com

This article describes a simple, low-cost method of recording the lawn avoidance behavior of Caenorhabditis elegans, using readily available items such as a smartphone and a light emitting diode (LED) light box. We also provide a Python script to process the video file into a format more amenable for counting.

When exposed to toxic or pathogenic bacteria, the nematode Caenorhabditis elegans displays a learned lawn avoidance behavior, in which the worms gradually ...

a-smartphone-based-imaging-method-for-c-elegans-lawn-avoidance-assay

Research

JoVE Journal

Behavior

Setting up the Imaging Apparatus for C. elegans Lawn Avoidance Assay

Setting up the Imaging Apparatus for C. elegans Lawn Avoidance Assay  

To set up the imaging apparatus, use a smartphone with a minimum specification of 12 megapixel camera 1080 pixel resolution, five gigabyte storage space, in a timeLapse video app from the application store. Place the LED light box on the bottom rack of an incubator set at 25 degrees Celsius where the assay will take place. To hide the dotted pattern on the LED light surface, spread two sheets of tissues to cover the entire surface of the LED box.Make an elevated stage for the specimen comprising of a clear plastic sheet supported by hollow rectangular tunnels. Ensure that the tunnel's walls are somewhat dark to minimize light scatter. Place another rack above the stage to place the phones for recording.Each phone will record three to six plates, so adjust the rack height accordingly. Put a power strip inside the incubator to plug in the phones during overnight recording. To prepare for the recording, plug in the smartphone to the power strip connected to a power outlet.Ensure to disable the auto lock setting to prevent the phone from returning to the lock screen while recording. Open the timelapse camera app, and set the video quality to 1080 pixels at 30 frames per second. Set the timelapse interval to two seconds.Place the smartphone with the screen facing up to record with the back camera and ensure that the paper box tunnels fit within the field of view.

C. elegans Lawn Avoidance Assay

C. elegans Lawn Avoidance Assay  

Using a platinum wire pick, transfer 30 synchronized L4 stage worms to the PA14 plate. Place the worms in the middle of the PA14 bacteria lawn. In this study, for each condition, two plates were tested.Place the two plates on the elevated stage of the recording apparatus with the lid facing down such that the agar side is facing up toward the camera. On the smartphone screen, tap where the plate is, so the camera can focus on the assay plates. Start the recording, then add more plates to the stage.Record for 20 hours from the last set of plates placed on the stage. In the final time-lapse video, 20 hours of recording will result in a 20-minute-long video. Wild-type N2 worms were compared against npr-1 mutants.The wild-type worms progressively left the bacterial lawn and stayed outside. Worms outside the thick bacterial lawn were clearly seen in the video, but worms inside the bacterial lawn were harder to distinguish.

Video Processing and Manual Counting for C. elegans Lawn Avoidance Assay

Video Processing and Manual Counting for C. elegans Lawn Avoidance Assay  

Identify the dimensions of a PA14 plate containing the L4 stage worms by running the Python script extract_frame.py. Then open the JPEG file in ImageJ. From the menu, choose Analyze, then Set Measurements.Ensure that the display label box is checked and close the window. Using the straight line tool, measure the diameter of a plate by drawing a line across it. Then choose Analyze, then Measure from the menu.If the video is in 1080 pixels, each plate will be about 480 pixels wide. Enter this information in the notepad to be used later and close the results window. Using the multi-point tool, mark points on the upper left side of each plate which will become the upper left corner of the cropped videos.Mark it in order of when the plates were started. After creating a point for all the plates, choose Analyze, then Measure from the menu. Measurements including the X and Y coordinates of the points will appear in the results window.To process multiple videos, repeat the process in ImageJ with other JPEG files. All X and Y coordinates will be listed in the same results window. Save the results window into a CSV file.The file should be saved to the same directory as the movie files. To find the starting time for each plate, play the movie either on the computer or phone and take note of the starting times of each set of plates placed under the camera. Open the results.csv file with the coordinates and add a start column. For each row corresponding to individual plates, enter appropriate start time in seconds under the start column. Save the file.To crop and trim the videos, run the crop_n_trim. py script. Choose the results.csv file. Enter the plate dimensions and the pixel value noted earlier. The script will now read each row of the results.csv file to find the correct movie file after the script finishes running. A folder will appear with the same name as the movie, followed by the start time in which videos corresponding to the assay will be saved. For manual counting, open each AVI file in ImageJ.Count the worms that are visible outside the lawn and then calculate the occupancy rate for each time point. The wild type N2 worms progressively left the bacterial lawn and stayed outside as noted in the occupancy rate over time. The counts made directly from the plates were compared against counts from imaged worms.The counts made from imaged worms turned out to be highly accurate. When three trials for each strain were averaged together, the N2 and NPR1 strains yielded 99.5%and 96.2%accuracy respectively.

4.5K Views.  Yonsei University Wonju College of Medicine.  This article describes a simple, low-cost method of recording the lawn avoidance behavior of Caenorhabditis elegans, using readily available items such as a smartphone and a light emitting diode (LED) light box. We also provide a Python script to process the video file into a format more amenable for counting. 

Smartphone-Based Imaging for C. elegans Lawn Avoidance Assay

Podsumowanie