Fly Climbing Assay: A Method to Test General Locomotion in Drosophila melanogaster

Protokół

This protocol is an excerpt from Gevedon et al., In Vivo Forward Genetic Screen to Identify Novel Neuroprotective Genes in Drosophila melanogaster, J. Vis. Exp. (2019).

1. Climbing Assay (Adapted from Ali et al., J. Vis. Exp. (2011))

1. Validate the climbing assay. In this study, test the climbing assay based on previously described methodology by Ali et al., using Elav^C155>UAS-Tau^R406W (exhibiting lower climbing pass rates) and Elav^C155>UAS-GFP (control) and Elav^C155>UAS-mCherry (control) flies.
2. Flip the flies into a testing chamber, one line at a time (do not use CO₂ anesthesia) and allow them to recover for 5 min. If testing is done on different days, perform the assay at the same time of the day. In this study, all climbing assays were performed in the afternoon to control for circadian effects on locomotion.
   NOTE Avoid exposing the flies to direct sunlight when testing; this will interfere with their ability to climb.
3. Forcibly tap the chamber (marked side down) onto a mouse pad placed on a solid surface 3 times so all flies begin the assay at the bottom. Observe fly locomotion over a period of 10 s.
4. Record the number of flies that reach or pass the 5 cm line within this time, as well as the total number of flies tested. Repeat the protocol, waiting 1 min between each trial, for a minimum of 3 trial replicates per line.
   NOTE In the present study, each vial contained between 2 and 19 flies for the initial screening (male flies) and between 6 and 21 flies for the mutant deficiency analysis of crossed female lines.

Access restricted. Please log in or start a trial to view this content.

Materiały

Name	Company	Catalog Number	Comments
VWR® Drosophila Vial; Narrow	VWR	75813-160
VWR® General-Purpose Laboratory Labeling Tape	VWR	89097-912
Standard mouse pad
Stereoscope	Motic		Model SMZ-168
Drosophila Incubator	VWR	89510-750
R software package