NIAID grant K22AI081748.

1. The Drip Flow Biofilm Reactor
<ol>
<li>The drip flow biofilm reactor (available from Biosurface Technologies or custom designed versions can usually be made by university machine shops, see Figure 1) is assembled and autoclaved. Assembly involves affixing coupons in chambers and securing chamber lids. The chamber, along with biofilm medium (tryptic soy broth 2 grams/L and glucose 2 grams/L), and influent nutrient tubing are sterilized by autoclaving.</li>
<li>Inoculation of the drip flow reactor is preformed by placing the reactor on a flat surface, clamping the effluent tubing lines, filling each chamber with 10 mL tryptic soy broth and adding 10 &mu;L of a S. aureus culture grown overnight in tryptic soy broth. The inoculated reactor is then place in a 37&deg;C incubator for 18 hours.</li>
<li>After 18 hours of incubation, the effluent tubing is unclamped and the reactor is placed on a wooden block cut to a 10&deg; angle.</li>
<li>Aseptically connect the influent nutrient tubing to the bottle containing the continuous flow nutrient broth. Feed the tubing line through the pump and prime the tubes by running the pump at a maximum speed (will vary depending on pump model).</li>
<li>Once the influent tubing is primed stop the pump and attach connect needles (22 gauge, 1 inch) to the end of each tube. Wipe the chamber inlet stopper with an ethanol wipe and aseptically insert the needles through the inlet stopper.</li>
<li>Turn on the pump and allow the media to slowly drip (flow rate ~125 &mu;L/minute) over the coupons. The media should flow downward along the coupon from the inlet stopper port to the effluent port. Operate the reactor in continuous flow for 2-5 days (depending on the application), occasionally checking the reactor for proper drainage.</li>
<li>To harvest the drip flow reactor biofilms, stop the pump and carefully remove the needles from the reactor. The reactor can then be placed on a flat surface and the coupons can be aseptically removed using sterile forceps. If microscopy is desired, the coupons can now be processed accordingly (Figure 2B is a scanning electron micrograph of a S. aureus biofilm grown in a drip biofilm reactor). If quantification of the biofilm biomass or physiology studies are the goal of the study, the biofilm can be removed from the coupon using a cell scraper. While holding the coupons with forceps, gently scrape the biofilm off the coupon into a conical tube containing phosphate buffered saline using a cell scraper. Note: to quantify the colony forming units in the biofilms, it is necessary to homogenize the harvested biofilms with a tissue homogenizer to disaggregate clumps and form a homogenous suspension. Various models of tissue homogenizers are suitable for this application. We utilize a Fisher Scientific Tissuemiser Homogenizer (product # 15-338-420) at full speed for 1 minute to homogenize biofilm samples. Failure to homogenize the biofilm will result in an underestimation of the colony forming units present in the sample.</li>
</ol>
2. The Rotating Disk Biofilm Reactor
<ol>
<li>The rotating disk biofilm reactor (available from available from Biosurface Technologies or can be custom made, see Figure 3) is assembled and autoclaved. Assemble the reactor by first place the spinning disk coupons into the slots of the spinning disc and placing it into a 1-liter glass beaker with an overflow port. A number 15-rubber stopper with holes drilled in it to allow media flow and aeration is used as the reactor cap. The reactor, biofilm media (tryptic soy broth 2 g/L and glucose 2 g/L), and inlet tubing are then sterilized by autoclaving.</li>
<li>The rotating disk biofilm reactor is inoculated by placing 250 mLs of sterile medium into the reactor, and adding 0.5 mL of an overnight S. aureus culture grown in tryptic soy broth. The reactor is then placed on a stir plate set to 250 rpm and incubated overnight at the desired temperature.</li>
<li>After 16 hours of incubation connect the inlet tubing to the port on medium reservoir and connect it to the peristaltic pump. The pump is then turn on and flow set to ~0.25 mL/min (flow can be altered depending on the growth rate desired).</li>
<li>After 24 hours stop the reactor and aseptically remove the disc without touching the biofilm coupons. Remove the coupons using sterile forceps and dip each one into phosphate buffered saline to remove any loosely attached bacteria.</li>
<li>For antimicrobial compound testing, the chips can be placed into individual wells of a 96 well plate containing compounds of interest. After incubation, chips are transferred into 1.5 mL microcentrifuge tubes containing 1 mL phosphate buffer saline and homogenized with a tissue homogenizer to disperse the intact biofilm.</li>
<li>Cells are then serial diluted and plated onto nutrient agar medium to determine viable colony forming units.</li>
<li>Note: many variations can be made on the above protocol. For example, spinning disk coupons can be coated with or made out of potential anti-biofilm compounds to test efficacy. Biofilm dispersants can also be evaluated be incubating coupons in dispersant compounds and quantifying bacteria attached versus detached.</li>
</ol>	 
3. Representative Results
An example of a set up drip flow reactor is shown if Figure 1. After three days of flow copious amounts of biofilm will accumulate on the coupon surface, Figure 2A. The total biomass will vary depending on bacterial strains and precise growth conditions. A scanning electron micrograph of a S. aureus biofilm grown in the drip flow reactor is shown in Figure 2B.
A rotating disk reactor is shown in figure 3A. The protocol described can be adapted to the specific requirements of generally any microorganism capable of forming a biofilm. Figure 3B shows the spinning disc with 18 plastic disks affixed. These disk-grown biofilms are particularly well suited for antimicrobial testing and yield highly reproducible results11.
<img src="/files/ftp_upload/2470/2470fig1.jpg" alt="Figure 1" /> 
Figure 1. The drip flow reactor setup. Important components are labeled.
<img src="/files/ftp_upload/2470/2470fig2.jpg" alt="Figure 2" /> 
Figure 2. Example of a drip flow S. aureus biofilm. A) This biofilm was grown for three days following the protocol described. Lids from the first two chambers of the reactor are removed to show the yellow S. aureus biofilm biomass. B) Sacnning electron micrograph of a S. aureus biofilm grown in the drip flow reactor.
<img src="/files/ftp_upload/2470/2470fig3.jpg" alt="Figure 3" /> 
Figure 3. The rotating disk reactor. A) Example of a running spinning disk reactor. Key component are labeled. B) Close up view of a spinning disk.

<ol>
	<li>Costerton, J. W., Lewandowski, Z., Caldwell, D. E., Korber, D. R., Lappin-Scott, H. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microbial+Biofilms.">Microbial Biofilms.</a> Annu. Rev. Microbiol. 49, 711-745 (1995).</li><li>Costerton, J. W., Cheng, K. J., Gessey, G. G., Ladd, T. I., Nickel, J. C., Dasgupta, M., Marrie, T. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Bacterial+biofilms+in+nature+and+disease.">Bacterial biofilms in nature and disease.</a> Ann. Rev. Microbiol. 41, 435-464 (1987).</li><li>O'Toole, G. A., Kolter, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Initiation+of+biofilm+formation+in+Pseudomonas+fluorescens+WCS365+proceeds+via+multiple,+convergent+signaling+pathways:+a+genetic+analysis.">Initiation of biofilm formation in Pseudomonas fluorescens WCS365 proceeds via multiple, convergent signaling pathways: a genetic analysis.</a> Mol. Micro. 28, 449-461 (2002).</li><li>Boles, B. R., Horswill, A. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Agr-mediated+dispersal+of+Staphylococcus+aureus+biofilms.">Agr-mediated dispersal of Staphylococcus aureus biofilms.</a> PLoS Pathog. 4, e1000052-e1000052 (2008).</li><li>Goeres, D. M., Haamilton, M. A., Beck, N. A., Buckingham-Meyer, K., Hilyard, J., Loetterle, L. A., Walker, D. K., Stewart, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+method+for+growing+a+biofilm+under+low+shear+at+the+air-liquid+interface+using+the+drip+flow+biofilm+reactor.">A method for growing a biofilm under low shear at the air-liquid interface using the drip flow biofilm reactor.</a> Nature Protocols. 4, 783-788 (2009).</li><li>Fu, W., Forster, T., Mayer, O., Curtin, J. J., Lehman, S. M., Donlan, R. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Bacteriophage+cocktail+for+the+prevention+of+biofilm+formation+by+Pseudomonas+aeruginosa+on+catheters+in+an+in+vitro+model+system.">Bacteriophage cocktail for the prevention of biofilm formation by Pseudomonas aeruginosa on catheters in an in vitro model system.</a> Antimicrob Agents Chemother. 54, 397-404 (2010).</li><li>Xu, K. D., McFeters, G. A., Stewart, P. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Biofilm+resistance+to+antimicrobial+agents.">Biofilm resistance to antimicrobial agents.</a> Microbiology. 146, 547-549 (2000).</li><li>Xu, K. D., Stewart, P. S., Xia, F., Huang, C. T., McFeters, G. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Spatial+physiological+heterogeneity+in+Pseudomonas+aeruginosa+biofilm+is+determined+by+oxygen+availability.">Spatial physiological heterogeneity in Pseudomonas aeruginosa biofilm is determined by oxygen availability.</a> Appl. Environ. Microbiol. 64, 4035-4039 (1998).</li><li>Boles, B. R., Thoendel, M., Singh, P. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Self-generated+diversity+produces+"insurance+effects"+in+biofilm+communities.">Self-generated diversity produces "insurance effects" in biofilm communities.</a> Proc. Natl. Acad. Sci. USA. 101, 16630-16635 (2004).</li><li>Pitts, B., Willse, A., McFeters, G. A., Hamilton, M. A., Zelver, N., Stewart, P. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+repeatable+laboratory+method+for+testing+the+efficacy+of+biocides+against+toilet+bowl+biofilms.">A repeatable laboratory method for testing the efficacy of biocides against toilet bowl biofilms.</a> J. Appl. Microbiol. 91, 117-11 (2001).</li><li>Boles, B. R., Thoendel, M., Singh, P. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Rhamnolipids+mediate+detachment+of+Pseudomonas+aeruginosa+from+biofilms.">Rhamnolipids mediate detachment of Pseudomonas aeruginosa from biofilms.</a> Mol. Microbiol. 57, 1210-1223 (2005).</li><li>Hentzer, M., Teitzel, G. M., Balzer, G. J., Heydorn, A., Molin, S., Givskov, M., Parsek, M. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Alginate+overproduction+affects+Pseudomonas+aeruginosa+biofilm+structure+and+function.">Alginate overproduction affects Pseudomonas aeruginosa biofilm structure and function.</a> J. Bacteriol. 183, 5395-5401 (2001).</li><li>Lin, H. Y., Chen, C. T., Huang, C. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Use+of+merocyanine+540+for+photodynamic+inactivation+of+Staphylococcus+aureus+planktonic+and+biofilm+cells.">Use of merocyanine 540 for photodynamic inactivation of Staphylococcus aureus planktonic and biofilm cells.</a> Appl. Environ. Microbiol. 70, 6453-6458 (2004).</li></ol>

No conflicts of interest declared.

Biofilms grown in different reactors will often have different characteristics and each reactor has different applications. In this work, we describe the use of two biofilm reactors: a drip flow biofilm reactor and a rotating disk reactor. Drip flow reactors are useful for growing low shear biofilms at an air-liquid interface and are adaptable to a variety of conditions. We find them extremely convenient for studies where a large amount of biofilm biomass is desirable. This setup can easily be adapted for studies invo...

Erratum: The Use of Drip Flow and Rotating Disk Reactors for Staphylococcus aureus Biofilm Analysis

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">	
		
		<div>
		<table border="1">
		<thead>
		<tr>
		<th>Material Name</th>
		<th>Type</th>
		<th>Company</th>
		<th>Catalogue Number</th>
		<th>Comment</th>
		</tr>
		</thead>
		<tbody>
		
<tr>
<td>Drip Flow Reactors</td>
<td>&nbsp;</td>
<td>BioSurface Technologies Corporation</td>
<td>DFR 110</td>
<td>&nbsp;</td>
<tr>
<td>Rotating Disk Reactors</td>
<td>&nbsp;</td>
<td>BioSurface Technologies Corporation</td>
<td>&nbsp;</td>
<td>&nbsp;</td>		</tbody>
		</table>
		</div>

the use of drip flow and rotating disk reactors for staphylococcus aureus biofilm analysis

Most microbes in nature are thought to exist as surface-associated communities in biofilms.1 Bacterial biofilms are encased within a matrix and attached to a surface.2 Biofilm formation and development are commonly studied in the laboratory using batch systems such as microtiter plates or flow systems, such as flow-cells. These methodologies are useful for screening mutant and chemical libraries (microtiter plates)3 or growing biofilms for visualization (flow cells)4. Here we present detailed protocols for growing Staphylococcus aureus in two additional types of flow system biofilms: the drip flow biofilm reactor and the rotating disk biofilm reactor.
Drip flow biofilm reactors are designed for the study of biofilms grown under low shear conditions.5 The drip flow reactor consists of four parallel test channels, each capable of holding one standard glass microscope slide sized coupon, or a length of catheter or stint. The drip flow reactor is ideal for microsensor monitoring, general biofilm studies, biofilm cryosectioning samples, high biomass production, medical material evaluations, and indwelling medical device testing.6,7,8,9
The rotating disk reactor consists of a teflon disk containing recesses for removable coupons.10 The removable coupons can by made from any machinable material. The bottom of the rotating disk contains a bar magnet to allow disk rotation to create liquid surface shear across surface-flush coupons. The entire disk containing 18 coupons is placed in a 1000 mL glass side-arm reactor vessel. A liquid growth media is circulated through the vessel while the disk is rotated by a magnetic stirrer. The coupons are removed from the reactor vessel and then scraped to collect the biofilm sample for further study or microscopy imaging. Rotating disc reactors are designed for laboratory evaluations of biocide efficacy, biofilm removal, and performance of anti-fouling materials.9,11,12,13

Watch this Scientific Journal Video about The Use of Drip Flow and Rotating Disk Reactors for Staphylococcus aureus Biofilm Analysis at JoVE.com

The Use of Drip Flow and Rotating Disk Reactors for Staphylococcus aureus Biofilm Analysis

Protocols for utilizing open system flow biofilms with drip flow reactors and rotating disk reactors are presented in detail.

The Use of Drip Flow and Rotating Disk Reactors for Staphylococcus aureus Biofilm Analysis

Most microbes in nature are thought to exist as surface-associated communities in biofilms.1  Bacterial biofilms are encased within a matrix and attached ...

the-use-drip-flow-rotating-disk-reactors-for-staphylococcus-aureus

Research

JoVE Journal

Immunology and Infection

17.0K Views.  University of Michigan. Protocols for utilizing open system flow biofilms with drip flow reactors and rotating disk reactors are presented in detail.