Financial support provided by National Science Foundation (CAREER award CHE-0847262. We thank Vapourtec Ltd and Enwave Optronics for equipment support, and Daniel Daleb of the University of Connecticut for his assistance in construction of the flow cell apparatus.

1. Find Suitable Signals for Reaction Monitoring
<ol>
	<li>Obtain Raman spectra for all starting materials and the product.</li>
	<li>Overlay spectra and identify an intense band that is unique to the product.</li>
	<li>Use this Raman band to monitor the progress of the reaction. A band at 1,608&#160;cm-1 was selected in this case.</li>
</ol>
2. Set up the Flow Cell
<ol>
	<li>Obtain a suitable flow cell. Here use one with the following dimensions: width of 6.5 mm, height of 20 mm, and a path length of 5 mm (Figure 2A).</li>
	<li>Place the flow cell in a container that provides an environment free of ambient light.</li>
	<li>Connect tubing to the inlet and outlet of the flow cell (in this case 1 mm I.D. PFA tubing).</li>
</ol>
3. Interface the Raman Spectrometer with the Flow Cell
<ol>
	<li>Obtain a suitable Raman spectrometer with a flexible optical assembly that can be placed in close proximity to the flow cell.</li>
	<li>Place the optical assembly through a suitably sized aperture in the box containing the flow cell assembly (Figure 2B).</li>
	<li>Slide the optical assembly until it touches the flow cell and then pull it back leaving a gap of ~ 2 mm.</li>
	<li>Fill the flow cell with 100% acetone.</li>
	<li>Turn on the Raman spectrometer and acquire spectra in continuous-scan mode.</li>
	<li>Focus the laser by gently moving the light pipe a fraction at a time. Keep moving the light pipe until the signal is at its greatest intensity and the peaks are sharp and well defined.</li>
</ol>
<img alt="Figure 2" src="/files/ftp_upload/52393/52393fig2.jpg" /> 
Figure 2. (A) Flow cell and (B) Raman interface used. <a href="https://www.jove.com/files/ftp_upload/52393/52393fig2large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
4. Prepare Reagent and Solvent Solutions
<ol>
	<li>Add salicylaldehyde (6.106 g, 50 mmol, 1 equiv) and ethyl acetoacetate (6.507 g, 50 mmol, 1 equiv) to a 50 ml volumetric flask.</li>
	<li>Add ethyl acetate to a total volume of 50 ml and then thoroughly mix the contents.</li>
	<li>Transfer a 10 ml aliquot of the stock solution to a 20 ml glass vial containing a magnetic stir bar. Label this vial &#8220;reagent.&#8221;</li>
	<li>In a 100 ml bottle place 90 ml of ethyl acetate. Label this bottle &#8220;solvent&#8221;. In a 100 ml bottle place 90 ml of acetone. Label this bottle &#8220;solvent intercept&#8221;.</li>
</ol>
5. Prepare the Flow Apparatus
<ol>
	<li>Ensure that the flow unit has at least two pumps and label them &#8220;P1&#8221; and &#8220;P2&#8221;. Identify solvent and reagent inlet lines for each pump. Place the exit lines from the &#8220;collect&#8221; and &#8220;waste&#8221; lines into two individual 100 ml bottles labeled &#8220;product&#8221; and &#8220;waste&#8221;, respectively.</li>
	<li>As a reactor, use a 10 ml capacity PFA coil capable of being heated.</li>
	<li>Connect the tube exiting P1 to the inlet of the PFA reactor coil.</li>
	<li>Install a three-port polyether ether ketone (PEEK) tee-mixer after the reactor coil.</li>
	<li>Connect the tube exiting P2 to the tee-mixer, 180&#176; from the reactor coil exit tubing. Connect a piece of tubing to the third port of the Tee-mixer. On the other end of this tube place a back-pressure regulator.</li>
	<li>Connect a line from the output of the back-pressure regulator to the input of the flow cell. Connect a line from the output of the flow cell to the &#8220;waste/collect&#8221; switch.</li>
	<li>Prime the solvent lines for both P1 and P2 as well as the reagent line for P1 with solvent. Move the reagent line for P1 from the solvent bottle to the reagent bottle.</li>
	<li>Using P1, pass ethyl acetate through the reactor coil at 2 ml/min until it is filled. Pass acetone through P2 at a flow rate of 2 ml/min for 2 min.</li>
	<li>Adjust the solvent flow rates for both P1 and P2 to 1 ml/min. Set the back-pressure regulator to a pressure of 7 bar. Set the reactor coil temperature to the desired temperature.</li>
	<li>Double-check the equipment is configured as shown in the schematic in Figure 3.</li>
	<li>Once the system reaches constant temperature and pressure, check for leaks and then run the reaction.</li>
</ol>
<img alt="Figure 3" src="/files/ftp_upload/52393/52393fig3.jpg" /> 
Figure 3. Schematic of the equipment configuration used for reaction monitoring experiments. <a href="https://www.jove.com/files/ftp_upload/52393/52393fig3large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
6. Monitor the Reaction
<ol>
	<li>Take a background scan of the ethyl acetate/acetone solvent system as it passed through the flow cell. This will be automatically subtracted from all subsequent scans.</li>
	<li>Configure the spectrometer to take scans every 15 sec (in this case the Raman spectrometer was set to a 10 sec integration time, boxcar = 3, and average = 1).</li>
	<li>Inject piperidine (0.05 ml, 0.05 mmol, 0.1 equiv) all at once into the glass vial labeled &#8220;reagent&#8221;.</li>
	<li>After thoroughly mixing, switch P1 from &#8220;solvent&#8221; to &#8220;reagent.&#8221; Set the exit stream to &#8220;collect.&#8221;</li>
	<li>When all material is completely loaded, switch P1 from &#8220;reagent&#8221; back to &#8220;solvent.&#8221; Continue flowing solvent through the reactor coil for another 30 min. Once this time has elapsed, turn off the heating.</li>
	<li>Turn pumps P1 and P2 off when the reactor coil temperature has cooled to below 50 &#176;C.</li>
</ol>
7. Analyze the Data
<ol>
	<li>Export the Raman spectrometer data to a spreadsheet and plot Raman intensity at 1,608 cm-1 vs. time.</li>
	<li>To optimize conditions, perform the reaction across a number of flow rates and reactor temperatures in an iterative manner.</li>
	<li>Overlay plots of Raman intensity at 1,608 cm-1 vs. time. 
	Note: Higher Raman intensity correlates with higher product conversion.</li>
</ol>
8. Run the Reaction Using Optimized Conditions
<ol>
	<li>Having screened various conditions (varying flow rates / reactor temperatures), run the reaction using the optimized conditions to afford the highest product conversion.&#160;</li>
</ol>
9. Isolate the Product
<ol>
	<li>Take the contents of the product flask and pour it into a beaker containing 100 ml of ice and 20 ml of 2 M HCl.</li>
	<li>Rinse the product flask with a minimal amount of ethyl acetate (2 ml) and transfer to the beaker.</li>
	<li>Stir the icy mixture until all the ice is completely melted.</li>
	<li>Set up a filtration system with a Hirsch funnel, side-arm flask, rubber collar and a length of rubber vacuum tubing.</li>
	<li>Filter the resulting precipitate under vacuum, rinse with cold diethyl ether (10 ml) and allow it to dry under a heat lamp (2-3 hr) or dry O/N under vacuum.</li>
	<li>Confirm the identity of the product by 1H nuclear magnetic resonance (NMR) spectroscopy using CDCl3 as the solvent. For a 500 MHz NMR spectrometer, the 1H NMR data of 3-acetylcoumarin is as follows: &#948; = 2.73 (s, 3 H) 7.31 - 7.40 (m, 2 H) 7.65 (ddd, J = 7.53, 4.37, 2.60 Hz, 2 H) 8.51 (s, 1 H) ppm, 13C NMR data: &#948; = 30.84 (CH3) 117.00 (CH) 118.56 (C) 124.86 (CH) 125.27 (CH) 130.51 (CH) 134.68 (C) 147.74 (CH) 155.64 (C) 159.52 (C) 195.77 (C) ppm.</li>
</ol>

<ol>
	<li>Wiles, C., Watts, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Micro Reaction Technology in Organic Synthesis. , (2011).</li><li>van den Broek, S. A. M. W., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Continuous+Flow+Production+of+Thermally+Unstable+Intermediates+in+a+Microreactor+with+Inline+IR-Analysis:+Controlled+Vilsmeier&#8211;Haack+Formylation+of+Electron-Rich+Arenes.">Continuous Flow Production of Thermally Unstable Intermediates in a Microreactor with Inline IR-Analysis: Controlled Vilsmeier&#8211;Haack Formylation of Electron-Rich Arenes.</a> Org. Process Res. Dev. 16 (5), 934-938 (2012).</li><li>Baxendale, I. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+integration+of+flow+reactors+into+synthetic+organic+chemistry.">The integration of flow reactors into synthetic organic chemistry.</a> J. Chem. Technol. Biotechnol. 88 (4), 519-552 (2013).</li><li>Malet-Sanz, L., Susanne, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Continuous+Flow+Synthesis.">Continuous Flow Synthesis.</a> A Pharma Perspective J. Med. Chem. 55 (9), 4062-4098 (2012).</li><li>Hartwig, J., Metternich, J. B., Nikzad, N., Kirschning, A., Ley, S. V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Continuous+flow+chemistry:+a+discovery+tool+for+new+chemical+reactivity+patterns.">Continuous flow chemistry: a discovery tool for new chemical reactivity patterns.</a> Org. Biomol. Chem. 12 (22), 3611-3615 (2014).</li><li>De Beer, T., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Near+infrared+and+Raman+spectroscopy+for+the+in-process+monitoring+of+pharmaceutical+production+processes.">Near infrared and Raman spectroscopy for the in-process monitoring of pharmaceutical production processes.</a> Int. J. Pharm. 417, 32-47 (2001).</li><li>McMullen, J. P., Jensen, K. F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Integrated+microreactors+for+reaction+automation:+New+approaches+to+reaction+development.">Integrated microreactors for reaction automation: New approaches to reaction development.</a> Annu. Rev. Anal. Chem. 3, 19-42 (2010).</li><li>Moore, J. S., Jensen, K. F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Automated+multitrajectory+method+for+reaction+optimization+in+a+microfluidic+system+using+online+IR+analysis.">Automated multitrajectory method for reaction optimization in a microfluidic system using online IR analysis.</a> Org. Process Res. Dev. 16 (8), 1409-1415 (2012).</li><li>Carter, C. F., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=ReactIR+Flow+Cell:+A+New+Analytical+Tool+for+Continuous+Flow+Chemical+Processing.">ReactIR Flow Cell: A New Analytical Tool for Continuous Flow Chemical Processing.</a> Org. Process Res. Dev. 14 (2), 393-404 (2010).</li><li>Ferstl, W., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Inline+Analysis+in+Microreaction+Technology:+A+Suitable+Tool+for+Process+Screening+and+Optimization.">Inline Analysis in Microreaction Technology: A Suitable Tool for Process Screening and Optimization.</a> Chem. Eng. Technol. 30 (3), 370-378 (2007).</li><li>Benito-Lopez, F., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Optical+fiber-based+on-line+UV/Vis+spectroscopic+monitoring+of+chemical+reaction+kinetics+under+high+pressure+in+a+capillary+microreactor.">Optical fiber-based on-line UV/Vis spectroscopic monitoring of chemical reaction kinetics under high pressure in a capillary microreactor.</a> Chem. Commun. (22), 2857-2859 (2005).</li><li>Gökay, O., Albert, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=From+single+to+multiple+microcoil+flow+probe+NMR+and+related+capillary+techniques:+a+review.">From single to multiple microcoil flow probe NMR and related capillary techniques: a review.</a> Anal. Bioanal. Chem. 402 (2), 647-669 (2012).</li><li>Jones, C. J., Larive, C. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Could+smaller+really+be+better?+Current+and+future+trends+in+high-resolution+microcoil+NMR+spectroscopy.">Could smaller really be better? Current and future trends in high-resolution microcoil NMR spectroscopy.</a> Anal. Bioanal. Chem. 402 (1), 61-68 (2012).</li><li>Mozharov, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Improved+Method+for+Kinetic+Studies+in+Microreactors+Using+Flow+Manipulation+and+Noninvasive+Raman+Spectrometry.">Improved Method for Kinetic Studies in Microreactors Using Flow Manipulation and Noninvasive Raman Spectrometry.</a> J. Am. Chem. Soc. 133 (10), 3601-3608 (2011).</li><li>Chaplain, G., Haswell, S. J., Fletcher, P. D. I., Kelly, S. M., Mansfield, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Development+and+evaluation+of+a+Raman+flow+cell+for+monitoring+continuous+flow+reactions.">Development and evaluation of a Raman flow cell for monitoring continuous flow reactions.</a> Aust. J. Chem. 66 (2), 208-212 (2013).</li><li>Browne, D. L., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Continuous+flow+reaction+monitoring+using+an+on-line+miniature+mass+spectrometer.">Continuous flow reaction monitoring using an on-line miniature mass spectrometer.</a> Rapid Comm. Mass. Spectrosc. 26 (17), (1999).</li><li>Koster, S., Verpoorte, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+decade+of+microfluidic+analysis+coupled+with+electrospray+mass+spectrometry:+An+overview.">A decade of microfluidic analysis coupled with electrospray mass spectrometry: An overview.</a> Lab Chip. 7 (11), 1394-1412 (2007).</li><li>Leadbeater, N. E., Schmink, J. R., Hamlin, T. A., de la Hoz, A., Loupy, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Tools+for+Monitoring+Reactions+Performed+Using+Microwave+Heating.">Tools for Monitoring Reactions Performed Using Microwave Heating.</a> Microwaves in Organic Synthesis. 1, 327-376 (2012).</li><li>Leadbeater, N. E., Schmink, J. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Use+of+Raman+spectroscopy+as+a+tool+for+in+situ.+monitoring+of+microwave-promoted+reactions.">Use of Raman spectroscopy as a tool for in situ. monitoring of microwave-promoted reactions.</a> Nature Protoc. 3 (1), 1-7 (2008).</li><li>Schmink, J. R., Holcomb, J. L., Leadbeater, N. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Use+of+Raman+spectroscopy+as+an+In+Situ.+Tool+to+Obtain+Kinetic+Data+for+Organic+Transformations.">Use of Raman spectroscopy as an In Situ. Tool to Obtain Kinetic Data for Organic Transformations.</a> Chem. Eur. J. 14 (32), 9943-9950 (2008).</li><li>Hamlin, T. A., Leadbeater, N. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Raman+spectroscopy+as+a+tool+for+monitoring+mesoscale+continuous-flow+organic+synthesis:+Equipment+interface+and+assessment+in+four+medicinally-relevant+reactions.">Raman spectroscopy as a tool for monitoring mesoscale continuous-flow organic synthesis: Equipment interface and assessment in four medicinally-relevant reactions.</a> Beilstein J. Org. Chem. 9, 1843-1852 (2013).</li><li>Kelly, C. B., Lee, C., Leadbeater, N. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+approach+for+continuous-flow+processing+of+reactions+that+involve+the+in+situ.+formation+of+organic+products.">An approach for continuous-flow processing of reactions that involve the in situ. formation of organic products.</a> Tetrahedron Lett. 52 (2), 263-265 (2011).</li><li>Wren, S. N., Donaldson, D. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Glancing-angle+Raman+spectroscopic+probe+for+reaction+kinetics+at+water+surfaces.">Glancing-angle Raman spectroscopic probe for reaction kinetics at water surfaces.</a> Phys. Chem. Chem. Phys. 12, 2648-2654 (2010).</li><li>Leadbeater, N. E., Smith, R. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Real-Time+Monitoring+of+Microwave-Promoted+Suzuki+Coupling+Reactions+Using+in+Situ.+Raman+Spectroscopy.">Real-Time Monitoring of Microwave-Promoted Suzuki Coupling Reactions Using in Situ. Raman Spectroscopy.</a> Org. Lett. 8 (20), 4589-4591 (2006).</li></ol>

The authors have nothing to disclose.

The ease in which the Raman spectrometer can be interfaced with the flow unit makes this inline technique valuable for reaction monitoring. A number of reaction variables can be probed in an expedited manner, allowing the user to arrive at optimized reaction conditions faster than when using offline methods. Application of the techniques described herein also allows for monitoring of the formation of side products, assuming a suitable band can be found. Conditions can be screened and selected, which allow both for the hi...

By using continuous-flow processing, chemists are finding that they can perform a range of chemical reactions safely, effectively, and with ease1,2. As a result, flow chemistry equipment is becoming an integral tool for running reactions both in industrial settings as well as research labs in academic institutions. A wide variety of synthetic chemistry transformations have been carried out in flow reactors3,4. In select cases, reactions that do not work in batch have been shown to proceed smoothly under continuous-flow conditions5. For both reaction optimization and quality control, incorporation of in-line reaction monitoring with flow processing offers significant advantages. In-line monitoring provides continuous analysis with real-time response to actual sample conditions. This is faster and, in some cases, more reliable than comparable off-line techniques. A number of in-line analytical techniques have been interfaced with flow reactors7. Examples include infrared8,9, UV-visible10,11, NMR12,13, Raman spectroscopy14,15, and mass spectrometry16,17.
Our research group has interfaced a Raman spectrometer with a scientific microwave unit18. Using this, a range of reactions have been monitored from both a qualitative19 and quantitative20 standpoint. Building on this success, we have recently interfaced our Raman spectrometer with one of our continuous-flow units and employed it for in-line reaction monitoring of a number of key medicinally-relevant organic transformations.21 In each case it was possible to monitor the reactions and also in one example, by means of a calibration curve, we could determine product conversion from Raman spectral data. In Here we describe how to set up the apparatus and use it to monitor reactions. We use the piperidine-catalyzed synthesis of 3-acetylcoumarin (1) from salicylaldehyde with ethyl acetoacetate (Figure 1) as the model reaction here.
<img alt="Figure 1" src="/files/ftp_upload/52393/52393fig1.jpg" /> 
Figure 1. Base catalyzed condensation reaction between salicylaldehyde and ethyl acetoacetate to yield 3-acetylcoumarin (1). <a href="https://www.jove.com/files/ftp_upload/52393/52393fig1large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>

<table border="0">
	<tbody>
		<tr>
			<td>Salicylaldehyde</td>
			<td>Sigma-Aldrich</td>
			<td>S356</td>
			<td>Reagent Grade, 98%</td>
		</tr>
		<tr>
			<td>Ethyl acetoacetate</td>
			<td>Acros Organics</td>
			<td>117970010</td>
			<td>99%</td>
		</tr>
		<tr>
			<td>Piperidine</td>
			<td>Sigma-Aldrich</td>
			<td>104094</td>
			<td>Reagent Plus, 99%</td>
		</tr>
		<tr>
			<td>Hydrochloric acid</td>
			<td>Sigma-Aldrich</td>
			<td>320331</td>
			<td>ACS Reagent, 37%</td>
		</tr>
		<tr>
			<td>Ethyl acetate</td>
			<td>Sigma-Aldrich</td>
			<td>34858</td>
			<td>CHROMASOLV, for HPLC, &#62;99.7%</td>
		</tr>
		<tr>
			<td>Acetone</td>
			<td>Sigma-Aldrich</td>
			<td>650501</td>
			<td>CHROMASOLV, for HPLC, &#62;99.9%</td>
		</tr>
		<tr>
			<td>Flow cell</td>
			<td>Starna Cells</td>
			<td></td>
			<td>583.65.65-Q-5/Z20</td>
		</tr>
		<tr>
			<td>Flow unit</td>
			<td>Vapourtec</td>
			<td></td>
			<td>E-series system</td>
		</tr>
		<tr>
			<td>Raman spectrometer</td>
			<td>Enwave Optronics Inc</td>
			<td></td>
			<td>Model EZRaman-L</td>
		</tr>
	</tbody>
</table>

real-time monitoring of reactions performed using continuous-flow processing: the preparation of 3-acetylcoumarin as an example

By using inline monitoring, it is possible to optimize reactions performed using continuous-flow processing in a simple and rapid way. It is also possible to ensure consistent product quality over time using this technique. We here show how to interface a commercially available flow unit with a Raman spectrometer. The Raman flow cell is placed after the back-pressure regulator, meaning that it can be operated at atmospheric pressure. In addition, the fact that the product stream passes through a length of tubing before entering the flow cell means that the material is at RT. It is important that the spectra are acquired under isothermal conditions since Raman signal intensity is temperature dependent. Having assembled the apparatus, we then show how to monitor a chemical reaction, the piperidine-catalyzed synthesis of 3-acetylcoumarin from salicylaldehyde and ethyl acetoacetate being used as an example. The reaction can be performed over a range of flow rates and temperatures, the in-situ monitoring tool being used to optimize conditions simply and easily.

The continuous-flow preparation of 3-acetylcoumarin was chosen as a representative reaction for in-line monitoring. In batch, the reaction proceeds well when using ethyl acetate as the solvent. However, the product (1) is not completely soluble at RT. To prevent potential clogging of the back-pressure regulator, as well as mitigate the risk of having solid particles in the flow cell which would perturb signal acquisition, we used a technique we developed previously for this and other reactions22</su...

Watch this Scientific Journal Video about Real-time Monitoring of Reactions Performed Using Continuous-flow Processing: The Preparation of 3-Acetylcoumarin as an Example at JoVE.com

Real-time Monitoring of Reactions Performed Using Continuous-flow Processing: The Preparation of 3-Acetylcoumarin as an Example

Real-time monitoring allows for fast optimization of reactions performed using continuous-flow processing. Here the preparation of 3-acetylcoumarin is used as an example. The apparatus for performing in-situ Raman monitoring is described, as are the steps required to optimize the reaction.

By using inline monitoring, it is possible to optimize reactions performed using continuous-flow processing in a simple and rapid way. It is also possible ...

real-time-monitoring-reactions-performed-using-continuous-flow

Research

JoVE Journal

Chemistry

9.6K Views.  University of Connecticut. Real-time monitoring allows for fast optimization of reactions performed using continuous-flow processing. Here the preparation of 3-acetylcoumarin is used as an example. The apparatus for performing in-situ Raman monitoring is described, as are the steps required to optimize the reaction.